Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Octupolar versus Néel Order in Cubic 5d 2 Double Perovskites

We report time-of-flight neutron spectroscopy and neutron and x-ray diffraction studies of the 5 d 2 double perovskite magnets, Ba 2 M OsO 6 ( M = Zn , Mg , Ca ). We find that these materials host antiferromagnetically coupled 5 d 2 Os 6 + ions decorating a face-centered cubic (fcc) lattice and are found to remain cubic down to the lowest temperatures. They all exhibit thermodynamic anomalies consistent with a single phase transition at a temperature T * , and a gapped magnetic excitation spectrum with spectral weight concentrated at wave vectors typical of type-I antiferromagnetic orders. However, while muon spin resonance experiments show clear evidence for time-reversal symmetry breaking below T * , we observe no corresponding magnetic Bragg scattering signal. These results are shown to be consistent with ferro-octupolar symmetry breaking below T * , and are discussed in the context of other 5 d double perovskite magnets and theories of exotic orders driven by multipolar interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Nucleation of Dislocations in 3.9 nm Nanocrystals at High Pressure

As circuitry approaches single nanometer length scales, it has become important to predict the stability of single nanometer-sized metals. The behavior of metals at larger scales can be predicted based on the behavior of dislocations, but it is unclear if dislocations can form and be sustained at single nanometer dimensions. Here, we report the formation of dislocations within individual 3.9 nm Au nanocrystals under nonhydrostatic pressure in a diamond anvil cell. We used a combination of x-ray diffraction, optical absorbance spectroscopy, and molecular dynamics simulation to characterize the defects that are formed, which were found to be surface-nucleated partial dislocations. These results indicate that dislocations are still active at single nanometer length scales and can lead to permanent plasticity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Crystal plasticity finite element simulation of lattice rotation and x-ray diffraction during laser shock compression of tantalum

Here we present a crystal plasticity model tailored for high-pressure, high-strain-rate conditions that uses a multiscale treatment of dislocation-based slip kinetics. We use this model to analyze the pronounced plasticity-induced lattice rotations observed in shock-compressed polycrystalline tantalum via in situ x-ray diffraction. By making direct comparisons between experimentally measured and simulated texture evolution, we can explain how the details of the underlying slip kinetics control the degree of lattice rotation that ensues. Specifically, we show that only the highly nonlinear kinetics caused by dislocation nucleation can explain the magnitude of the rotation observed under shock compression. We demonstrate a good fit between our crystal plasticity model and x-ray diffraction data and exploit the data to quantify the dislocation nucleation rates that are otherwise poorly constrained by experiment in the dynamic compression regime.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Utah FORGE: Powder X-ray Diffraction Data from Well 16A(78)-32 Core

This dataset from Lawrence Livermore National Laboratory (LLNL) consists of four raw X-ray diffraction (XRD) scans and preliminary results of quantitative XRD analysis. The scanned samples were prepared from four subcores, which came from various depths of the FORGE well 16A(78)-32 core. Desired core lengths were selected from available core photos (on GDR), provided by FORGE personnel, and subcored at LLNL. The XRD scans were collected in May 2023 at LLNL as pre-experimental characterization data for these subcores, which will be used in core-flooding experiments at LLNL and in triaxial direct shear experiments at Los Alamos National Laboratory as part of DOE Project 5-2428. XRD scans are in RAW file format (e.g., FORGE-5477-full.raw) and are suitable for viewing and analysis using open-source quantitative XRD software (e.g., Profex; www.profex-xrd.org ) and/or other proprietary instrument software.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Local and long-range atomic/magnetic structure of non-stoichiometric spinel iron oxide nanocrystallites

Spinel iron oxide nanoparticles of different mean sizes in the range 10–25 nm have been prepared by surfactant-free up-scalable near- and super-critical hydrothermal synthesis pathways and characterized using a wide range of advanced structural characterization methods to provide a highly detailed structural description. The atomic structure is examined by combined Rietveld analysis of synchrotron powder X-ray diffraction (PXRD) data and time-of-flight neutron powder-diffraction (NPD) data. The local atomic ordering is further analysed by pair distribution function (PDF) analysis of both X-ray and neutron total-scattering data. It is observed that a non-stoichiometric structural model based on a tetragonal γ-Fe 2 O 3 phase with vacancy ordering in the structure (space group P 4 3 2 1 2) yields the best fit to the PXRD and total-scattering data. Detailed peak-profile analysis reveals a shorter coherence length for the superstructure, which may be attributed to the vacancy-ordered domains being smaller than the size of the crystallites and/or the presence of anti-phase boundaries, faulting or other disorder effects. The intermediate stoichiometry between that of γ-Fe 2 O 3 and Fe 3 O 4 is confirmed by refinement of the Fe/O stoichiometry in the scattering data and quantitative analysis of Mössbauer spectra. The structural characterization is complemented by nano/micro-structural analysis using transmission electron microscopy (TEM), elemental mapping using scanning TEM, energy-dispersive X-ray spectroscopy and the measurement of macroscopic magnetic properties using vibrating sample magnetometry. Notably, no evidence is found of a Fe 3 O 4 /γ-Fe 2 O 3 core-shell nanostructure being present, which had previously been suggested for non-stoichiometric spinel iron oxide nanoparticles. Finally, the study is concluded using the magnetic PDF (mPDF) method to model the neutron total-scattering data and determine the local magnetic ordering and magnetic domain sizes in the iron oxide nanoparticles. The mPDF data analysis reveals ferrimagnetic collinear ordering of the spins in the structure and the magnetic domain sizes to be ∼60–70% of the total nanoparticle sizes. The present study is the first in which mPDF analysis has been applied to magnetic nanoparticles, establishing a successful precedent for future studies of magnetic nanoparticles using this technique.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

High-resolution neutron diffraction determination of noncollinear antiferromagnetic order in the honeycomb magnetoelectric Fe 4 ⁢Nb 2⁢ O 9

Magnetoelectric systems offer potential for device applications exploiting coupled states between electric and magnetic properties. Among magnetoelectric materials, Fe 4 ⁢Nb 2 ⁢O 9 has attracted special attention because of its pronounced dielectric signal at high magnetic transition temperatures. However, the magnetic ground state, which is essential information for understanding its unusual magnetoelectricity, remains unclarified. Here, we report a noncollinear magnetic ground state of Fe 4 ⁢Nb 2 ⁢O 9 . To examine the magnetoelectric effect associated with sequential magnetic and structural transitions upon cooling, we conducted combined x-ray diffraction, magnetic susceptibility, magnetization, dielectric constant, and magnetodielectric experiments. Powder neutron diffraction experiments revealed a series of magnetic Bragg peaks and clear splitting of peaks via structural transition. Magnetic Rietveld refinements, combined with group theory analysis, determined a noncollinear antiferromagnetic structure including a significant 𝑐-axis moment component at 1.5 K. This article provides insights into the understanding of its magnetoelectric properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Synthesis of a series of rare-earth-based multi-anion chalcogenide iodides RE 3 Si 2 Se x S 8− x I (RE = La, Ce, Pr, and Nd) using the flux-assisted boron–chalcogen mixture method

Single crystals and polycrystalline powders of rare earth mixed chalcogenide iodides La 3 Si 2 Se 1.21 S 6.79 I, Ce 3 Si 2 Se 1.39 S 6.61 I, Pr 3 Si 2 Se 1.22 S 6.78 I, and Nd 3 Si 2 Se 1.18 S 6.82 I were prepared using the reactive flux-assisted boron–chalcogen mixture (BCM) method at 850 °C. All compounds crystallized in the monoclinic crystal system, space group C2/c (space group number 15). The series adopts the La 3 Si 2 O 8 Cl structure type, containing isolated SiQ 4 tetrahedra connected by REQ 8 (RE = La, Ce, Pr and Nd) polyhedra; this arrangement creates tunnels that are filled by I atoms. The partial substitution of S by Se was carried out to modulate the optical properties. Phase pure samples and uniform solid solutions were obtained for all compositions as determined using powder X-ray diffraction patterns. Polycrystalline powders were used for physical property measurements, including magnetic susceptibility and UV-Vis diffuse reflectance. The solid-state UV-Vis data for the polycrystalline La 3 Si 2 Se 1.21 S 6.79 I, Ce 3 Si 2 Se 1.39 S 6.61 I, and Pr 3 Si 2 Se 1.22 S 6.78 I samples revealed band gaps of E g = 2.5(1), 2.2(1), and 2.3(1) eV, typical of semiconductors. Magnetic measurements indicated that Ce 3 Si 2 Se 1.39 S 6.61 I and Nd 3 Si 2 Se 1.18 S 6.82 I exhibit paramagnetic behavior with slightly negative Weiss constants θ = −25 and −38. The photoluminescence spectrum of Ce 3 Si 2 Se 1.39 S 6.61 I exhibits a broad emission band around ∼493 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Understanding the Hydronium Cation in the Solid State: A Study in Synthetic Hydronium Uranyl Phosphate and Arsenate Mineral Systems and Their Irradiation Stability

Here, we present neutron diffraction, electronic structure calculations, and optical vibrational spectroscopic characterization of hydronium uranyl phosphate (HUP), the synthetic analog of chernikovite ((H 3 O)(UO 2 )(PO 4 )·3H 2 O) to gain insight into structural features of the hydronium cation in the solid state. HUP crystallizes in P2 1 /c instead of previously reported P4/ncc 1 at room temperature and Pccn below 302 K. Lower symmetry was required due to hydronium and interstitial water positions within the structure. Crystallographic positions of hydronium cations determined from powder neutron diffraction data are bolstered by Raman and attenuated total reflectance infrared spectroscopic measurements and are further informed by density functional theory with phonon eigenvector analysis for spectral assignments. Finally, HUP and its arsenate analog (trogerite, (H 3 O)(UO 2 )(AsO 4 )·3H 2 O), (HUAs) were studied using He 2+ irradiation as an analog for α radiolysis to investigate the irradiation stability of these phases and the stability of hydronium cations in the solid state. Dose studies were employed wherein each sample was irradiated to 5, 10, 15, 25, and 50 MGy. Structural insight regarding irradiated materials is gained using optical vibrational spectroscopy and powder X-ray diffraction. Surprising irradiation stability of HUAs was found up to 50 MGy of dose, which may have important implications for understanding and modeling the geologic stability of legacy U.

actinides↗
DOE OSTI2024

Synthesis and characterization of the novel breathing pyrochlore compound Ba 3 ⁢Tm 2⁢ Zn 5⁢ O 11

In this study, a novel material from the rare-earth based breathing pyrochlore family, Ba 3 ⁢Tm 2 ⁢Zn 5 ⁢O 11 , was successfully synthesized. Powder x-ray diffraction and high-resolution powder neutron diffraction confirmed phase purity and the $F\bar4$3⁢𝑚 breathing pyrochlore crystal structure, while thermogravimetric analysis revealed incongruent melting behavior compared to its counterpart, Ba 3 ⁢Yb 2⁢ Zn 5⁢ O 11 . High-quality single crystals of Ba 3 ⁢Tm 2 ⁢Zn 5 ⁢O 11 were grown using the traveling solvent floating zone technique and assessed using Laue x-ray diffraction and single crystal x-ray diffraction. Further, thermodynamic characterization indicated paramagnetic behavior down to 0.05 K, and inelastic neutron scattering measurements identified distinct dispersionless crystal electric field energy bands, with the fitted crystal electric field model predicting a single-ion singlet ground state and an energy gap of ∼9 meV separating it from the first excited (singlet) state. Additional low-energy excitation studies on single crystals revealed dispersionless bands at 0.8 and 1 meV. Computed phonon dispersions from first-principles calculations ruled out phonons as the origin of these modes, further illustrating the puzzling and unique properties of Ba 3 ⁢Tm⁢ 2 Zn 5 ⁢O 11 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Neutron vibrational spectroscopic evidence for short H∙∙∙H contacts in the RNiInH 1.4; 1.6 (R = Ce, La) metal hydride

Intermetallic metal hydrides are critical materials for hydrogen storage applications, however, metal hydrides with greater storage capacities are still needed. Within metal hydrides, the volumetric storage capacities are limited by the number of hydrogen-accommodating interstitial sites which can be simultaneously occupied given a minimum hydride nearest-neighbor distance of ~2.1 A, according to the Switendick-Westlake criterion. To date, violations of this criterion are rare. Perhaps the most well studied compounds violating this criterion are the RNiInHx compounds (R = Ce, La, Nd). Previous neutron diffraction studies on the deuterated species revealed the presence of Ni-D∙∙∙D-Ni-D∙∙∙D-Ni chains with anomalously close D∙∙∙D contacts of ~1.6 A. Yet there are no neutron vibrational spectroscopic investigations reported for these atypical hydrides. Here we use neutron vibrational spectroscopy (NVS) measurements to probe the hydrogen dynamics in LaNiInHx (x = 0.67, 1.6) and CeNiInH 1.4 . For x > 0.67, the presence of close H...H contacts yields two related features in the vibrational spectrum centered near ~90 meV corresponding to the oscillations of paired H atoms simultaneously occupying neighboring R 3 Ni tetrahedra. Notably, these features are energetically distinct from comparable vibrational motions for "unpaired" H atoms when x = 0.67. To compare, we also present powder neutron diffraction and NVS measurements for the newly characterized, chemically similar Sn compounds CeNiSnH, CeNiSnH 2 , and CeNiSnD 2 . These compounds also contain R 3 Ni tetrahedra, however, the H-occupied tetrahedra are well separated from each other with the closest H∙∙∙H distances exceeding 2.1 A, and the Switendick-Westlake criterion is not violated. Consequently, the spectral signature of the close H∙∙∙H contacts is absent in these hydrides.

08 HYDROGEN↗
DOE OSTI2020

Thermophysical properties of high-density, sintered monoliths of yttrium dihydride in the range 373–773 K

Yttrium dihydride is a promising nuclear reactor moderator for high-temperature, thermal micro-reactors due to its ability to retain hydrogen to high temperatures while having a relatively low impact on neutron economy. However, it is difficult to fabricate yttrium dihydride in high-density, near net-shape monoliths for moderator applications due to challenges associated with the hydrogen absorption process. Here, high-density monoliths of yttrium dihydride were prepared by powder metallurgical methods. The lattice strain and thermal expansion coefficient were measured using neutron diffraction of powders of directly-hydrided yttrium, while the molar heat capacity and thermal diffusivity of sintered yttrium dihydride were measured using differential scanning calorimetry (DSC) and laser flash analysis (LFA), respectively. The molar heat capacity of yttrium dihydride was also calculated using density functional theory (DFT) for comparison. These parameters were used to then calculate the thermal conductivity and resistivity of yttrium dihydride as a function of temperature. The thermophysical properties of materials produced by both methods were observed to be consistent with the values from literature for yttrium dihydride. Due to the novelty of producing yttrium dihydride by powder metallurgical methods, this result indicated that the sintered monoliths were of high quality and that powder metallurgy is a viable method for large-scale production of yttrium dihydride monoliths for nuclear reactor moderator applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Synthesis, structure and canted antiferromagnetism of layered cobalt hydroxide sorbate

Layered hybrid organic–inorganic compounds of the transition metal hydroxides, in which part of the hydroxide ions are exchanged for organic ligands that act as spacers of the 2-dimensional inorganic layers, elicit new or enhanced properties. The interlayer ligands enable fine-tuning of the physicochemical properties of the metal hydroxide layers, including their magnetism. Specifically, within the Co(OH) 2 family of transition ion hydroxides, this approach has been leveraged to stabilize antiferromagnetic and ferrimagnetic ground states for pillared and layered complexes, respectively. Here, in this work, we further investigate the effects of changing dimensionality, local Co coordination, and interlayer spacing on the magnetic ground state of brucite-like β-Co(OH) layered complexes. We report the hydrothermal synthesis of a new crystalline material, Co(OH)(sorb), where the inorganic layers are spaced by monotopic, doubly unsaturated sorbate ligands (sorb = [C 6 H 7 O 2 ] – ). The material was structurally characterized using powder X-ray and neutron diffraction measurements and the crystal structure was solved ab initio from powder diffraction data and refined using the Rietveld method. The magnetic susceptibility and magnetization measurements reveal canted antiferromagnetic ordering with T N = 41.7 K. This report augments our understanding of tuning magnetism through dimensionality in layered complexes and represents a step forward in the design of new 2D layered hybrid compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

X-ray diffraction study of phase transformation dynamics of Fe and Fe-Si alloys along the shock Hugoniot using an x-ray free electron laser

The x-ray free electron laser (XFEL) enables probing a highly compressed material response at the subnanosecond timescale. Here we exploit the ultrafast XFEL pulse to combine reflection x-ray diffraction and laser-driven shock compression to perform a study of the phase transformation and stability in Fe and Fe-Si alloys. Our approach enables us to observe that solid-solid phase transformations occur in Fe and Fe- Si 8.5 wt % in ≤ 130 ps at ~ 130 GPa; no transformation is observed in Fe- Si 16 wt % up to 110 GPa. Density functional theory calculations predict similar phase relations.

36 MATERIALS SCIENCE↗