Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase association”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

On Stochastic Heating and Its Phase-space Signatures in Low-beta Kinetic Turbulence

We revisit the theory of stochastic heating of ions and investigate its phase-space signatures in kinetic turbulence of relevance to low- β portions of the solar wind. In particular, we retain a full scale-dependent approach in our treatment, and we explicitly consider the case in which electric-field fluctuations can be described by a generalized Ohm's law that includes Hall and thermoelectric effects. These two electric-field terms provide the dominant contributions to stochastic ion heating when the ion-Larmor scale is much smaller than the ion skin depth, ρ i << d i , which is the case at β << 1. Employing well-known spectral scaling laws for Alfvén-wave and kinetic-Alfvén-wave turbulent fluctuations, we obtain scaling relations characterizing the field-perpendicular particle-energization rate and energy diffusion coefficient associated with stochastic heating in these two regimes. Phase-space signatures of ion heating are then investigated using three-dimensional hybrid-kinetic simulations of continuously driven Alfvénic turbulence at low β (namely, β i = β e = 0.3 and β i = β e = 1/9). In these simulations, energization of ions parallel to the magnetic field is subdominant compared to its perpendicular counterpart ( Q ∥,i << Q ⊥,i ), and the fraction of turbulent energy that goes into ion heating is ≈75% at β i = 0.3 and ≈40% at β i ≃ 0.1. The phase-space signatures of ion energization are consistent with Landau-resonant collisionless damping and a ( β -dependent) combination of ion-cyclotron and stochastic heating. We demonstrate good agreement between our scale-dependent theory and various signatures associated with the stochastic portion of the heating. We discuss briefly the effect of intermittency on stochastic heating and the implications of our work for the interpretation of stochastic heating in solar-wind spacecraft data.

79 ASTRONOMY AND ASTROPHYSICS↗

In situ Synchrotron X‐ray Metrology Boosted by Automated Data Analysis for Real‐time Monitoring of Cathode Calcination

Abstract Synchrotron X‐ray‐based in situ metrology is advantageous for monitoring the synthesis of battery materials, offering high throughput, high spatial and temporal resolution, and chemical sensitivity. However, the rapid generation of massive data poses a challenge to on‐site, on‐the‐fly analysis needed for real‐time process monitoring. Here, a weighted lagged cross‐correlation (WLCC) similarity approach is presented for automated data analysis, which merges with in situ synchrotron X‐ray diffraction metrology to monitor the calcination process of the archetypal nickel‐based cathode, LiNiO 2 . The WLCC approach, incorporating variables that account for peak shifts and width changes associated with structural transformations, enables rapid extraction of phase progression within 10 seconds from tens of diffraction patterns. Details are captured, from initial precursors to intermediates and the final layered LiNiO 2 , providing information for agile on‐site adjustments during experiments and complementing post hoc diffraction analysis by offering insights into early‐stage phase nucleation and growth. Expanding this data‐powered platform paves the way for real time calcination process monitoring and control, which is pivotal to quality control in battery cathode manufacturing.

36 MATERIALS SCIENCE↗

Geometric entropies and their Hamiltonian flows

In holographic theories, the Hubeny-Rangamani-Takayanagi (HRT) area operator plays a key role in our understanding of the emergence of semiclassical Einstein-Hilbert gravity. When higher derivative corrections are included, the role of the area is instead played by a more general functional known as the geometric entropy. It is thus of interest to understand the flow generated by the geometric entropy on the classical phase space. In particular, the fact that the associated flow in Einstein-Hilbert or Jackiw-Teitelboim (JT) gravity induces a relative boost between the left and right entanglement wedges is deeply related to the fact that gravitational dressing promotes the von Neumann algebra of local fields in each wedge to type II. This relative boost is known as a boundary-condition-preserving (BCP) kink-transformation. In a general theory of gravity (with arbitrary higher-derivative terms), it is straightforward to show that the flow continues to take the above geometric form when acting on a spacetime where the HRT surface is the bifurcation surface of a Killing horizon. However, the form of the flow on other spacetimes is less clear. In this paper, we use the manifestly-covariant Peierls bracket to explore such flows in two-dimensional theories of JT gravity coupled to matter fields with higher derivative interactions. The results no longer take a purely geometric form and, instead, demonstrate new features that should be expected of such flows in general higher derivative theories. We also show how to obtain the above flows using Poisson brackets.

AdS-CFT correspondence↗

Measurements of Higgs boson production cross-sections in the $H → τ^+τ^-$ decay channel in pp collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

Measurements of the production cross-sections of the Standard Model (SM) Higgs boson (H) decaying into a pair of τ-leptons are presented. The measurements use data collected with the ATLAS detector from pp collisions produced at the Large Hadron Collider at a centre-of-mass energy of $\sqrt{s}$ = 13 TeV, corresponding to an integrated luminosity of 139 fb -1 . Leptonic (τ → ℓν ℓ ν τ ) and hadronic (τ → hadrons ν τ ) decays of the τ-lepton are considered. All measurements account for the branching ratio of H → ττ and are performed with a requirement |y H | < 2.5, where y H is the true Higgs boson rapidity. The cross-section of the pp → H → ττ process is measured to be 2.94 ± 0.21(stat)$^{+0.37}_{-0.32}$(syst) pb, in agreement with the SM prediction of 3.17 ± 0.09 pb. Inclusive cross-sections are determined separately for the four dominant production modes: 2.65 ± 0.41(stat)$^{+0.91}_{-0.67}$(syst) pb for gluon-gluon fusion, 0.197 ± 0.028(stat)$^{+0.032}_{-0.026}$(syst) pb for vector-boson fusion, 0.115 ± 0.058(stat)$^{+0.042}_{-0.040}$(syst) pb for vector-boson associated production, and 0.033 ± 0.031(stat)$^{+0.022}_{-0.017}$(syst) pb for top-quark pair associated production. Measurements in exclusive regions of the phase space, using the simplified template cross-section framework, are also performed. All results are in agreement with the SM predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bulk-like first-order magnetoelastic transition in FeRh particles

Near-equiatomic, chemically-ordered iron-rhodium (FeRh) alloy is a fundamentally interesting material that may become useful in niche applications making use of its unique magneto functional phenomena, for example, the giant inverse magnetocaloric effect near room temperature that is associated with a sharp first-order magnetic phase transition. The nearly discontinuous antiferromagnetic-ferromagnetic phase transformation in bulk FeRh is well-known; however, the transition broadens considerably in fine particles and films with thickness less than 50 nm, precluding their potential applications. Here, we report an abrupt, bulk-like first-order magnetoelastic transformation in powders consisting of sub-micron particles of nearly equiatomic FeRh compound synthesized via solid-state mechanochemical co-reduction of FeF 2 and RhCl3 and subsequent heat treatments. In this work, we demonstrate that annealing at temperatures ranging from 600 °C to 800 °C enables tailoring phase content, particle size, and magnetic properties of the powders. A maximum magnetic-field-induced entropy change of ~10 J/kg K at μ0ΔH = 1 T has been achieved in powders annealed at 800 °C. The retention of extraordinary responsiveness in sub-micron particles of FeRh is likely to open doors for system component fabrication using additive manufacturing methods, along with new opportunities to employ FeRh in theranostics.

36 MATERIALS SCIENCE↗

Trace Fe activates perovskite nickelate OER catalysts in alkaline media via redox-active surface Ni species formed during electrocatalysis

The accurate description of activity trends among perovskite-oxide oxygen-evolution-reaction (OER) catalysts using electronic-structure descriptors requires that the bulk structure of the catalyst is comparable to that of the surface. Few studies have addressed the dynamic nature of the catalyst's structure during the OER and the consequential implications for understanding activity. Here, we use a combination of electrochemical and materials-characterization techniques to study the surface reconstruction and the associated formation of a new redox-active phase on LaNiO 3 particles, LaNiO 3 epitaxial films, and an analogous Ruddlesden-Popper phase, La 2 NiO 4 . Small, but characteristic, redox features corresponding to Ni redox in nominally amorphous NiO x H y are observed during cyclic voltammetry of these initially fully crystalline materials. The size of these redox features grows with prolonged cycling and contributes to an increased surface area as determined from electrochemical impedance spectroscopy (EIS). Here we find the OER activity is strongly dependent on soluble Fe species in the electrolyte, common impurities in alkaline media. These observations are consistent with the reconstruction of the crystalline surface to form NiO x H y species and subsequent activation by adsorption of Fe forming the well-known and extremely active NiFeO x H y OER catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spectral induced polarization (SIP) measurements across a PFAS-contaminated source zone

There is a pressing need for the development of field-scale, in situ screening technologies for assessing variations in aqueous film forming foam (AFFF) concentrations in soils at former fire training and storage sites. Field-scale Spectral Induced Polarization (SIP) geophysical measurements were acquired on a transect crossing an AFFF source zone. Soil samples were acquired from ten locations and used to determine variations in poly- and per-fluoroalkyl substances (PFAS) concentrations in soils and soil texture. These samples were also used to create triplicate soil columns for laboratory-grade SIP measurements. Field and laboratory observations provide evidence that SIP measurements are sensitive to the concentration of AFFF constituents associated with the pore surface in soils. The phase of the SIP measurements on the laboratory samples was linearly correlated with total soil-sorbed PFAS concentration. The phase from the field SIP measurements was highest over the location of maximum PFAS concentration measured on the laboratory samples, although a significant correlation between field-measured phase and laboratory-measured total PFAS concentration was not established. The sensitivity of the SIP response to the removal of soil PFAS using a methanol wash procedure (total PFAS concentration drop of 366 ppb) adds evidence for the case for SIP characterization of AFFF source zones. The results of these studies suggest that SIP might be developed into a field-scale technology for rapid, indirect assessment of AFFF source zones. Such a technology could improve the effectiveness of AFFF source zone characterization at reduced costs.

58 GEOSCIENCES↗

Shock compression of a low-density carbon foam

Porous polymer foams are found in numerous applications where they may be subjected to dynamic compression. The shockwave properties of polymer foams have several features that make shock Hugoniot measurements and interpretation challenging. Here, we present a comparison of dynamic X-ray phase contrast imaging and traditional optical velocimetry approaches to measuring the shocked states for a low-density carbon foam. Overall, dynamic X-ray phase contrast imaging was found to reduce errors associated with the measured Hugoniot states. In this study, the foam exhibits anomalous compression as expected due to its high initial porosity arising from shock heating.

36 MATERIALS SCIENCE↗

Characterizing PM 2.5 Emissions and Temporal Evolution of Organic Composition from Incense Burning in a California Residence

The chemical composition of incense-generated organic aerosol in residential indoor air has received limited attention in Western literature. In this study, we conducted incense burning experiments in a single-family California residence during vacancy. Here, we report the chemical composition of organic fine particulate matter (PM 2.5 ), associated emission factors (EFs), and gas-particle phase partitioning for indoor semivolatile organic compounds (SVOCs). Speciated organic PM 2.5 measurements were made using two-dimensional gas chromatography coupled with high-resolution time-of-flight mass spectrometry (GC×GC-HR-ToF-MS) and semivolatile thermal desorption aerosol gas chromatography (SV-TAG). Organic PM 2.5 EFs ranged from 7 to 31 mg g –1 for burned incense and were largely comprised of polar and oxygenated species, with high abundance of biomass-burning tracers such as levoglucosan. Differences in PM 2.5 EFs and chemical profiles were observed in relation to the type of incense burned. Nine indoor SVOCs considered to originate from sources other than incense combustion were enhanced during incense events. Time-resolved concentrations of these SVOCs correlated well with PM 2.5 mass (R 2 > 0.75), suggesting that low-volatility SVOCs such as bis(2-ethylhexyl)phthalate and butyl benzyl phthalate partitioned to incense-generated PM 2.5 . Both direct emissions and enhanced partitioning of low-volatility indoor SVOCs to incense-generated PM 2.5 can influence inhalation exposures during and after indoor incense use.

54 ENVIRONMENTAL SCIENCES↗

Investigation of the monopole magneto-chemical potential in spin ices using capacitive torque magnetometry

The single-ion anisotropy and magnetic interactions in spin-ice systems give rise to unusual non-collinear spin textures, such as Pauling states and magnetic monopoles. The effective spin correlation strength (J eff ) determines the relative energies of the different spin-ice states. With this work, we display the capability of capacitive torque magnetometry in characterizing the magneto-chemical potential associated with monopole formation. We build a magnetic phase diagram of Ho 2 Ti 2 O 7 , and show that the magneto-chemical potential depends on the spin sublattice (α or β), i.e., the Pauling state, involved in the transition. Monte Carlo simulations using the dipolar-spin-ice Hamiltonian support our findings of a sublattice-dependent magneto-chemical potential, but the model underestimates the J eff for the β-sublattice. Additional simulations, including next-nearest neighbor interactions (J 2 ), show that long-range exchange terms in the Hamiltonian are needed to describe the measurements. This demonstrates that torque magnetometry provides a sensitive test for J eff and the spin-spin interactions that contribute to it.

36 MATERIALS SCIENCE↗

Effect of surface properties and polymer chain length on polymer adsorption in solution

In polymer nanoparticle composites (PNCs) with attractive interactions between nanoparticles (NPs) and polymers, a bound layer of the polymer forms on the NP surface, with significant effects on the macroscopic properties of the PNCs. The adsorption and wetting behaviors of polymer solutions in the presence of a solid surface are critical to the fabrication process of PNCs. In this study, we use both classical density functional theory (cDFT) and molecular dynamics (MD) simulations to study dilute and semi-dilute solutions of short polymer chains near a solid surface. Using cDFT, we calculate the equilibrium properties of polymer solutions near a flat surface while varying the solvent quality, surface–fluid interactions, and the polymer chain lengths to investigate their effects on the polymer adsorption and wetting transitions. Using MD simulations, we simulate polymer solutions near solid surfaces with three different curvatures (a flat surface and NPs with two radii) to study the static conformation of the polymer bound layer near the surface and the dynamic chain adsorption process. Additionally, we find that the bulk polymer concentration at which the wetting transition in the poor solvent system occurs is not affected by the difference in surface–fluid interactions; however, a threshold value of surface–fluid interaction is needed to observe the wetting transition. We also find that with good solvent, increasing the chain length or the difference in the surface–polymer interaction relative to the surface–solvent interaction increases the surface coverage of polymer segments and independent chains for all surface curvatures. Finally, we demonstrate that the polymer segmental adsorption times are heavily influenced only by the surface–fluid interactions, although polymers desorb more quickly from highly curved surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Opportunities and Challenges in Passive Thermal-Fluid and Energy Systems

Abstract This article focuses on passive systems that are used in energy and thermal-fluid applications. These passive systems do not have moving parts and are reliable and cost-effective. Fluid motion in these passive devices could be driven by capillary force, gravity, osmotic pressure, and/or concentration gradient. The fundamental mechanisms and limitations of transport phenomena for passive systems are highlighted, followed by their applications in heat pipes, fuel cells, thermal energy storage, and desalination systems. The capabilities of the passive systems are limited by the balance between the driving force and transport resistance. Based on the fundamental understanding of fluid flow and phase change in passive systems, this study proposes associated transport phenomena and quantitative criteria to determine the maximum heat transfer rate, the transport distance, and minimum pore size of wick structures (when relevant) in these passive devices. This article concludes with the discussion of challenges and future opportunities of passive systems.

Engineering↗

Raman gain control in optical fibers with orbital-angular-momentum-induced chirality of light

Stimulated Raman scattering is a particularly robust nonlinearity, occurring in virtually every material because its spectral linewidth and associated frequency shift do not typically depend on phases or directions (i.e. wavevectors) of the interacting light beams. In amorphous materials such as glass fibers, Raman bandwidths are large, enabling its use as a broadband gain element. This ubiquity makes it a versatile means for achieving optical amplification or realizing lasers over a large range of pulsewidths at user-defined colors. However, this ease of deploying the effect also presents itself as a stubborn source of noise in fiber-based quantum sources or parasitic emission in fiber lasers. Here, we show that orbital angular momentum carrying light beams experiencing spin-orbit interactions yield novel phase-matching criteria for Raman scattering. This enables tailoring its spectral shape (by over half the Raman shift in a given material) as well as strength (by ∼ 100×) simply by controlling light’s topological charge – a capability of utility across the multitude of applications where modulating Raman scattering is desired.

Liu, Xiao (ORCID:000000032239762X)↗

Computed Tomography Scanning and Geophysical Measurements of the Wellington 1-32 Core

The computed tomography (CT) facilities and the Multi-Sensor Core Logger (MSCL) at the U.S. Department of Energy’s (DOE), National Energy Technology Laboratory (NETL) in Morgantown, West Virginia were used to characterize core from the Wellington 1-32 well (API 15-191-22591), a small-scale field test site in the Wellington Field, in Sumner County, Kansas. Wellington 1-32 was drilled in association with the Kansas Geologic Survey’s (KGS) Phase I pre-feasibility study under the DOE-NETL Carbon Storage Assurance Facility Enterprise (CarbonSAFE) program, with the goal of utilizing the Arbuckle Group as a reservoir for CO 2 storage and the potential for stacked reservoir enhanced oil recovery from Mississippian reservoirs.

58 GEOSCIENCES↗

Crystalline versus Glassy Nature of Iron Phosphate Waste Forms Subjected to Different Slow Cooling Curves

This report provides experimental details and associated results on the elemental distributions (compositions), crystalline/amorphous phase distributions, and microstructures for iron phosphate reference materials (DPF5-336) made with different cooling curves and starting from different temperatures (i.e., 1050°C and 1200°C). The primary goal of this work was to evaluate the properties of the DPF5- 336 reference material after it was melted and cooled at different rates to simulate the cooling profile of different types of canisters. Crystal fractions across the SCC#2, SCC#3, and SCC#5 samples were all similar ranging in crystal content of 35.66–41.14 mass% with amorphous fractions being the balance (64.34–58.86 mass%, respectively). This shows that the heat treatment profile did not seems to greatly affect either the total crystal content or the phase distributions. The quenched sample was almost completely amorphous (99.55 mass%) with very small peaks identified as Li 3 Fe 2 (PO 4 ) 3 whereas the SCC-treated materials showed peaks for what appear to be ten separate phases present in various concentrations. Another goal of these experiments was to see how the phase distribution affected chemical durability of these waste forms, but that information is being collected at Argonne National Laboratory and will be published in a separate report

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

CalWave's xWave Design for PacWave (Final Technical Report)

CalWave Inc. (CalWave) is developing a wave energy converter (WEC) technology that can generate electricity from ocean waves. CalWave’s design offers a unique approach to wave energy conversion that operates fully submerged and can actively adjust the wave excitation. This capability gives the architecture enhanced survivability in ocean storms without adding significant costs. Prior to this project, CalWave had completed a demonstration of a fully functional WEC system in an open ocean demonstration at nominal 1:5 scale under FOA 1663. The goal of this project was the detailed design, following relevant standards and industry best-practices, of a variant of the xWave WEC technology that can safely and efficiently operate at the DOE’s PacWave South test site for a targeted deployment of up two years. The WEC design and associated review processes proceeded in two distinct project phases: a ‘Preliminary’ and a ‘Final’ design phase. The first phase of the project consisted of the systematic design of the WEC’s key features with regards to appropriate IEC standards. The work resulted in a preliminary design of the xWave hull including structural and Power Take-Off (PTO) load estimates, as well as performance estimates for all ocean conditions the WEC would operate in at PacWave South. Following the first open-water demonstration of CalWave’s small-scale “x1” device under FOA 1663, lessons learned were fed directly into a comprehensive review of the xWave design in the second design phase of this FOA project. CalWave’s work was supported by Sandia National Lab (SNL) and the National Renewable Energy Lab (NREL) on the holistic WEC design, and detailed feedback from specialized partners on hull design, mooring and anchoring specification, and electrical grid interconnection. Optimization of the WEC system was performed using a novel numerical optimization tool developed by Sandia and optimization trends were confirmed via an experimental model scale tank test campaign. Performance estimates for PacWave and a detailed xWave design including integration of all relevant system components were concluded. The mooring design was also concluded in the Final design phase using the most up to date sea floor characterization (CPT) data.

16 TIDAL AND WAVE POWER↗

Editorial: Harmonizing life cycle analysis (LCA) and techno-economic analysis (TEA) guidelines: a common framework for consistent conduct and transparent reporting of carbon dioxide removal and CCU technology appraisal

Stabilizing the climate will require significant efforts to curb greenhouse gas emissions, manage emissions that cannot be avoided, and remove as many legacy emissions as possible [i.e., carbon dioxide (International Energy Agency, 2020; Author Collective, 2022)]. In that context, negative emissions technologies will take CO 2 from the air (Direct Air Capture) or the water (Direct Ocean Capture) and permanently remove it (Roger et al., 2021) either by sequestering the CO 2 underground or converting it to so-called Track 1 materials (Sick et al., 2021) that have lifetimes of >100 years. Shorter-lived products that decompose back into CO 2 in <100 years are categorized as Track 2 materials and will at best be carbon neutral. A carbon neutral status can also be achieved if captured CO 2 from fossil-based point sources is sequestered or used to create Track 1 materials. Conversion of CO 2 from fossil-based sources to any Track 2 material and subsequent decomposition would add new fossil-based carbon to the atmosphere, constituting an ultimately undesirable process. The overall carbon footprint of a process or product will depend on many factors associated with the carbon production, use, and disposal phases.

54 ENVIRONMENTAL SCIENCES↗

Statistical and temporal characteristics of sawtooth events

Magnetospheric sawtooth events are characterized by periodic particle injections and magnetic dipolarizations spread quasi-simultaneously across a wide range of magnetic local times. We present a comprehensive statistical study of magnetospheric sawtooth events (STEs) during solar cycle 24 (2008–2016), extending previous catalogs and enabling solar cycle comparisons. Our results confirm that STEs predominantly occur during the rising and declining phases of the solar cycle, and are strongly associated with geomagnetic storms. Superposed epoch analysis reveals near-simultaneous particle injections across all magnetic local time sectors, but magnetic field dipolarization confined to the midnight region. These results support a scenario in which nightside tail reconnection and enhanced convection are the primary drivers of sawtooth oscillations. The localization of magnetic dipolarizations during STEs challenges global instability interpretations and suggests that STEs represent a stormtime substorm mode triggered under specific solar wind and magnetotail conditions. Superposed epoch analyses also show enhanced oxygen content in the magnetosphere during sawtooth events, but do not show a significant difference from geomagnetic storms that do not exhibit periodic behavior.

58 GEOSCIENCES↗