Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pattern dependence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Reversible patterning of poly(methylmethacrylate) doped with disperse Red 1 by laser scanning

Thin poly(methylmethacrylate) films doped by or covalently attached to disperse Red 1 acrylate (DR1) were patterned by laser scanning and simultaneous sample movement in confocal microscope. In both cases, periodical structure due to Marangoni effect is created. Modified polymers surfaces were analyzed by FTIR spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. After first stage of patterning, second stage with sample movement in perpendicular direction was applied. Depending on the method of DR1 dotation fishnet structure is obtained or pattern structure disappears. In the latter case, reversibility of pattern formation and erasure by laser scanning was studied.

36 MATERIALS SCIENCE↗

Optoelectronic properties and interband transition of La-doped BaSnO{sub 3} transparent conducting films determined by variable temperature spectral transmittance

Perovskite-structured Ba{sub 1−x}La{sub x}SnO{sub 3} (x = 0–0.10) films have been directly grown on (0001) sapphire substrates by a sol-gel method. Optical properties and bandgap energy of the films have been investigated by transmittance spectra from 10 K to 450 K. It indicates that these films exhibit a high transmission of more than 80% in the visible region. With increasing temperature, there is a significant bandgap shrinkage of about 0.5 eV for lightly La doping (x ≤ 0.04) films. For heavily La doping concentration (x ≥ 0.06), the bandgap remains nearly stable with the temperature and La composition. This is due to the fact that the lattice expansion caused by La doping is close to the saturation for the film doped with x = 0.06. Moreover, temperature dependent conductivity behavior shows a similar pattern, which suggests that the doping concentration of La-doped BaSnO{sub 3} (BLSO) films has a saturated state. The La introduction can modify the Sn 5s-O 2p antibonding state and the nonbonding O 2p orbital, which remarkably affect the electronic bandgap of the BLSO films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shear Stress Dependence of Force Networks in 3D Dense Suspensions

The geometric organization and force networks of 3D dense suspensions that exhibit both shear thinning and thickening have been examined as a function of varying strength of interparticle attractive interactions using lubrication flow discrete element simulations. Significant rearrangement of the geometric topology does not occur at either the local or global scale as these systems transition across the shear thinning and shear thickening regimes. In contrast massive rearrangements in the balance of attractive, lubrication, and contact forces are observed with interesting behavior of network growth and competition. In agreement with prior work, in shear thinning regions the attractive force is dominant, however as the shear thickening region is approached there is growth of lubrication forces. Lubrication forces oppose the attraction forces, but as viscosity continues to increase under increasing shear stress, the lubrication forces are dominated by contact forces that also resist attraction. Contact forces are the dominant interactions during shear thickening and are an order of magnitude higher than their values in the shear-thinning regime. At high attractive interaction strength, contact networks can form even under shear thinning conditions, however high shear stress is still required before contact networks become the driving mechanism of shear thickening. Analysis of the contact force network during shear thickening generally indicate a uniformly spreading network that rapidly forms across empty domains, however the growth patterns have structure that are significantly dependent upon the strength of interparticle interactions, indicating subtle variations in the mechanism of shear thickening.

Edens, Lance E.↗

Thickness-Dependent Order-to-Order Transitions of Bolaform-like Giant Surfactant in Thin Films

Controlling self-assembled nanostructures in thin films allows the bottom-up fabrication of ordered nanoscale patterns. Here we report the unique thickness-dependent phase behavior in thin films of a bolaform-like giant surfactant, which consists of butyl- and hydroxyl-functionalized polyhedral oligomeric silsesquioxane (BPOSS and DPOSS) cages telechelically located at the chain ends of a polystyrene (PS) chain with 28 repeating monomers on average. In the bulk, BPOSS-PS28-DPOSS forms a double gyroid (DG) phase. Both grazing incidence small angle X-ray scattering and transmission electron microscopy techniques are combined to elucidate the thin film structures. Interestingly, films with thicknesses thinner than 200 nm exhibit an irreversible phase transition from hexagonal perforated layer (HPL) to compressed hexagonally packed cylinders (c-HEX) at 130 °C, while films with thickness larger than 200 nm show an irreversible transition from HPL to DG at 200 °C. The thickness-controlled transition pathway suggests possibilities to obtain diverse patterns via thin film self-assembly.

36 MATERIALS SCIENCE↗

Moisture availability mediates the relationship between terrestrial gross primary production and solar-induced chlorophyll fluorescence: Insights from global-scale variations

Effective use of solar-induced chlorophyll fluorescence (SIF) to estimate and monitor gross primary production (GPP) in terrestrial ecosystems requires a comprehensive understanding and quantification of the relationship between SIF and GPP. To date, this understanding is incomplete and somewhat controversial in the literature. Here we derived the GPP/SIF ratio from multiple data sources as a diagnostic metric to explore its global-scale patterns of spatial variation and potential climatic dependence. We found that the growing season GPP/SIF ratio varied substantially across global land surfaces, with the highest ratios consistently found in boreal regions. Spatial variation in GPP/SIF was strongly modulated by climate variables. The most striking pattern was a consistent decrease in GPP/SIF from cold-and-wet climates to hot-and-dry climates. We propose that the reduction in GPP/SIF with decreasing moisture availability may be related to stomatal responses to aridity. Furthermore, we show that GPP/SIF can be empirically modeled from climate variables using a machine learning (random forest) framework, which can improve the modeling of ecosystem production and quantify its uncertainty in global terrestrial biosphere models. Finally, our results point to the need for targeted field and experimental studies to better understand the patterns observed and to improve the modeling of the relationship between SIF and GPP over broad scales.

59 BASIC BIOLOGICAL SCIENCES↗

Solute mixing regulates heterogeneity of mineral precipitation in porous media

Here, synchrotron X-ray microtomography was used to track the spatiotemporal evolution of mineral precipitation and the consequent alteration of the pore structure. Column experiments were conducted by injecting CaCl 2 and NaHCO 3 solutions into granular porous media either as a premixed supersaturated solution (external mixing) or as separate solutions that mixed within the specimen (internal mixing). The two mixing modes produced distinct mineral growth patterns. While internal mixing promoted transverse heterogeneity with precipitation at the mixing zone, external mixing favored relatively homogeneous precipitation along the flow direction. The impact of precipitation on pore water flow and permeability was assessed via 3-D flow simulations, which indicated anisotropic permeability evolution for both mixing modes. Under both mixing modes, precipitation decreased the median pore size and increased the skewness of the pore size distribution. Such similar pore-scale evolution patterns suggest that the clogging of individual pores depends primarily on local supersaturation state and pore geometry.

42 ENGINEERING↗

Short heatwaves during fluctuating incubation regimes produce females under temperature-dependent sex determination with implications for sex ratios in nature

Patterns of temperature fluctuations in nature affect numerous biological processes, yet, empirical studies often utilize constant temperature treatments. This can limit our understanding of how thermally sensitive species respond to ecologically relevant temperatures. Research on turtles with temperature-dependent sex determination (TSD) provides good examples of this, since nest temperatures from many populations rarely exceed those necessary to produce females under constant laboratory conditions. We hypothesized that exposure to brief periods of warm temperatures (i.e., heat waves) are integral to sex determination in species with TSD, which requires tests that move beyond constant temperatures. We exposed Trachemys scripta embryos from multiple populations and across the nesting season to heat waves of variable durations and quantified sex ratios. We found that embryos from all populations were highly sensitive to brief exposures to female producing temperatures; only 7.9 days of exposure produced a 50:50 sex ratio, but the response varied across the nesting season. From these findings, a model was developed to estimate sex ratios from field temperature traces, and this model outperformed traditional methods. Altogether, these results enhance our understanding of TSD and emphasize the importance of using biologically relevant temperatures when studying thermally sensitive processes.

60 APPLIED LIFE SCIENCES↗

Zero Crossing Steps and Anomalous Shapiro Maps in Graphene Josephson Junctions

The AC Josephson effect manifests itself in the form of “Shapiro steps” of quantized voltage in Josephson junctions subject to radio frequency (RF) radiation. This effect presents an early example of a driven–dissipative quantum phenomenon and is presently utilized in primary voltage standards. Shapiro steps have also become one of the standard tools to probe junctions made in a variety of novel materials. Here we study Shapiro steps in a widely tunable graphene-based Josephson junction in which the high- frequency dynamics is determined by the on-chip environment. We investigate the variety of patterns that can be obtained in this well-understood system depending on the carrier density, temperature, RF frequency, and magnetic field. Although the patterns of Shapiro steps can change drastically when just one parameter is varied, the overall trends can be understood and the behaviors straightforwardly simulated, showing some key differences from the conventional RCSJ model. The resulting understanding may help interpret similar measurements in more complex materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of the Duration of Rising Tone Chorus Elements

Abstract The duration of chorus elements is an important parameter to understand chorus excitation and to quantify the effects of nonlinear wave‐particle interactions on energetic electron dynamics. In this work, we analyze the duration of rising tone chorus elements statistically using Van Allen Probes data. We present the distribution of chorus element duration ( τ ) as a function of magnetic local time (MLT) and the geomagnetic activity level characterized by auroral electrojet ( A E ) index. We show that the typical value of τ for nightside and dawnside is about 0.12 s, smaller than that for dayside and duskside by about a factor of 2 to 4. Using a previously developed hybrid code, DAWN, we suggest that the background magnetic field inhomogeneity might be an important factor in controlling the chorus element duration. We also report that τ is larger during quiet times and shorter during moderate and active periods; this result is consistent with the MLT dependence of τ and the occurrence pattern of chorus waves at different levels of geomagnetic activity. We then investigate the correlation between τ and the frequency chirping rate (Γ). We show that, from observation, τ scales with Γ as , suggesting that statistically the frequency range of chorus elements ( τ Γ) should be roughly the same for different elements. These findings should be useful to the further development of a theoretical model of chorus excitation and to the quantification of nonlinear wave‐particle interactions on energetic electron dynamics.

Teng, S.↗

Regime dependence of ice cloud heterogeneity – a convective life‐cycle effect?

Cloud condensate varies on scales smaller than those typically resolved by global weather and climate models. In order to accurately predict the radiative and microphysical process rates representative of the entire model grid box, the effect of the subgrid‐scale heterogeneity of cloud must be taken into account. In this study, observed ice water content retrieved from A‐Train satellite observations is used to explore how spatial ice condensate variability, characterized by the fractional standard deviation (FSD, the standard deviation divided by the mean), varies with cloud regime. FSD is generally lower for overcast cloud scenes, but an additional predictor based on convective activity is needed to capture the high FSD associated with more turbulent clouds and reproduce the observed latitudinal and height variations of FSD. Convective clouds that extend only a few kilometres above the freezing level are likely to be smaller at an earlier stage in their life cycle, and actively growing with a higher FSD. In contrast, more mature clouds reaching the tropopause are larger and generally have a lower variability and smaller FSD. To capture this life‐cycle effect, a new parametrization is tested which uses the ratio of a model's convectively detrained condensate to the existing cloud condensate mass as a proxy for the cloud's convective life stage to highlight areas with enhanced condensate variability. The parametrization is scale‐adaptive, situation‐dependent and captures seasonally varying global patterns and the zonal mean vertical structure of observed ice condensate variability well. Ground‐based observations obtained from five Atmospheric Radiation Measurement sites provide independent confirmation that the parametrization satisfactorily captures condensate variability in high‐altitude ice clouds.

Ahlgrimm, Maike↗

Ten questions on building stock modeling to inform energy efficiency and sustainability

To enhance economic competitiveness and ensure energy efficiency, resilience, and security, cities and governments are adopting technologies and strategies to improve their existing building stocks. This approach aims to reduce energy use, improve energy affordability, and ensure a reliable power supply while safeguarding occupants during extreme weather events that may disrupt energy services. The effectiveness of these solutions will depend on building stock characteristics, use patterns, weather conditions, evolving technologies and their markets, and a city’s socio-economic conditions. This paper presents ten questions and answers that highlight the most important issues regarding the use of building stock modeling as a powerful tool to provide insights for informing stakeholders’ actions and decision-making on energy efficiency, costs reduction, and resilience of buildings in cities. Building stock modeling should build upon the fit-for-purpose framework, balancing the use case accuracy requirements, level of complexity, and needed resources (expertise, compute). The advancements in Artificial Intelligence (AI), the increasingly available open dataset of building stock in cities, and the more affordable powerful computing will accelerate the adoption of building stock modeling across scales by researchers and practitioners to inform decision making on sustainability and efficiency.

AI↗

High-Quality T2-Weighted 4-Dimensional Magnetic Resonance Imaging for Radiation Therapy Applications

Purpose: The purpose of this study was to improve triggering efficiency of the prospective respiratory amplitude-triggered 4-dimensional magnetic resonance imaging (4DMRI) method and to develop a 4DMRI imaging protocol that could offer T2 weighting for better tumor visualization, good spatial coverage and spatial resolution, and respiratory motion sampling within a reasonable amount of time for radiation therapy applications. Methods and Materials: The respiratory state splitting (RSS) and multi-shot acquisition (MSA) methods were analytically compared and validated in a simulation study by using the respiratory signals from 10 healthy human subjects. The RSS method was more effective in improving triggering efficiency. It was implemented in prospective respiratory amplitude-triggered 4DMRI. 4DMRI image datasets were acquired from 5 healthy human subjects. Liver motion was estimated using the acquired 4DMRI image datasets. Results: The simulation study showed the RSS method was more effective for improving triggering efficiency than the MSA method. The average reductions in 4DMRI acquisition times were 36% and 10% for the RSS and MSA methods, respectively. The human subject study showed that T2-weighted 4DMRI with 10 respiratory states, 60 slices at a spatial resolution of 1.5 × 1.5 × 3.0 mm{sup 3} could be acquired in 9 to 18 minutes, depending on the individual's breath pattern. Based on the acquired 4DMRI image datasets, the ranges of peak-to-peak liver displacements among 5 human subjects were 9.0 to 12.9 mm, 2.5 to 3.9 mm, and 0.5 to 2.3 mm in superior-inferior, anterior-posterior, and left-right directions, respectively. Conclusions: We demonstrated that with the RSS method, it was feasible to acquire high-quality T2-weighted 4DMRI within a reasonable amount of time for radiation therapy applications.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A method for determining optimal electric range by considering electric vehicle lightweighting on perceived ownership cost

The limited driving range due to high costs and low energy densities of batteries constraints the battery electric vehicle (BEV) market growth. Lightweighting in theory can reduce energy consumption rate and extend the driving range. The knowledge gap is to quantitatively link the cost-effectiveness of light-weight technologies with range extension and consumer acceptance of BEVs. In this study, a physics-based energy consumption model of BEVs is constructed and associated with a statistics-based model on the basis of travel surveys. A perceived cost of ownership (PCO) is then developed by adding intangible costs to traditional total cost of ownership models. We estimate, at the disaggregate vehicle model and driver level and the aggregate market level, 1) the extended range due to lightweighting for a given battery size; and 2) the optimal electric range based on lightweighting decisions. The cost-effectiveness of lightweighting for BEV range extension is found to vary with income-dependent daily range limitation value, driving patterns and lightweighting technology costs. In general, adopting lightweighting in BEVs is more cost-effective for consumers with higher daily limitation value, as well as for those with higher driving intensity or suitable daily driving patterns. When the lightweighting involves a higher vehicle production cost, less lightweighting could reduce the overall PCO for BEV owners. 4 of the selected top ten BEV models are found to benefit from additional 2.09%–4.45% lightweighting. Finally, the method built in this study can guide automakers in planning R&D investments in battery and lightweighting technologies.

33 ADVANCED PROPULSION SYSTEMS↗

Crystal structure of La{sub 0.4}Sr{sub 0.6}CoO{sub 2.71} investigated by TEM and XRD

The structure of the oxygen-deficient perovskite La{sub 0.4}Sr{sub 0.6}CoO{sub 3-{delta}} ({delta}=0.29) was investigated by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). Domains between 50 and 250 nm in size were observed in the electron microscope. Weak superstructure reflections were found with both X-ray and electron diffraction. Investigations of these superstructure reflections by selected area electron diffraction (SAED) and convergent beam electron diffraction (CBED) showed that the domains in a crystal are orientated in a 90 deg. relationship. High-resolution transmission electron microscopy (HRTEM) images from the domain boundary also revealed a 90 deg. orientation dependency. Using the symmetry of CBED patterns, the point group 4/mmm was determined. By comparing reflections from the SAED pattern with possible reflections, the space group I4/mmm (No. 139) could be isolated and finally the crystal structure was refined by Rietveld refinement. - Graphical abstract: Two adjacent domains show different orientation of the c-axis of the tetragonal unit cell in the according convergent beam electron diffraction patterns.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Signatures of the unique microstructure of additively manufactured steel observed via diffraction

A series of measurements were designed to gain confidence in the interpretation of the peak breadth in diffraction patterns collected from additively manufactured material, which has a novel microstructure in comparison to the well understood microstructure of wrought materials. Stainless steels made with two additive manufacturing techniques were compared to wrought material. Similar patterns observed in the scattering vector dependence for additively manufactured and deformed wrought materials suggested that the broadening in both materials was related to dislocations. Finally, this was confirmed by heat-treatment, during which both materials exhibited recovery due to the annealing of dislocations at the same temperature.

304L stainless-steel↗

Time-Domain Simulations of Transient Species in Experimentally Relevant Environments

Simulating the spectroscopic properties of short-lived thermal and photochemical reaction intermediates and products is a challenging task, as these species often feature atypical molecular and electronic structures. The complex environments in which such species typically reside in practice add further complexity to the problem. Herein, we tackle this problem in silico using ab initio molecular dynamics (AIMD) simulations, employing iso-CHBr3, namely H(Br)C-Br-Br, as a prototypical system. This species was chosen because it features both a non-conventional C-Br-Br bonding pattern, as well as a strong dependence of its spectral features on the local environment in which it resides, as illustrated in recent experimental reports. The spectroscopic properties of iso-CHBr3 were measured by several groups that captured this transient intermediate in the photochemistry of CHBr3 in the gas phase, in rare gas matrices at 5K, and in solution under ambient laboratory conditions. We simulate the UV-Vis and IR spectra of iso-CHBr3 in all three media, including a Ne cluster (64 atoms) and a methylcyclohexane cage (14 solvent molecules) representative of the matrix isolated and solvated species. We exclusively perform fully quantum mechanical static and dynamic simulations. By comparing our condensed phase simulations to their experimental analogues, we stress the importance of (i) conformational sampling, even at cryogenic temperatures, and (ii) using a fully quantum mechanical description of both solute and bath to properly account for the experimental observables.

Environmental Molecular Sciences Laboratory↗

Characterization of Chitin and Chitosan Molecular Structure in Aqueous Solution

Molecular dynamics simulations have been used to characterize the structure of chitin and chitosan fibers in aqueous solutions. Chitin fibers, whether isolated or in the form of a β-chitin nanoparticle, adopt the so-called 2-fold helix with Φ and φ values similar to its crystalline state. In solution, the intramolecular hydrogen bond HO3(n)•••O5(n+1) responsible for the 2-fold helical motif is stabilized by hydrogen bonds with water molecules in a well-defined orientation. On the other hand, chitosan can adopt five distinct helical motifs and its conformational equilibrium is highly dependent on pH. The hydrogen bond pattern and solvation around the O3 atom of insoluble chitosan (basic pH) are nearly identical to these quantities in chitin. Our findings suggest that the solubility and conformation of these polysaccharides are related to the stability of the intrachain HO3(n)•••O5(n+1) hydrogen bond, which is affect by the water exchange around the O3-HO3 hydroxyl group.

08 HYDROGEN↗

Contrast and Predictability of Island‐Scale El Niño Influences on Hawaii Wave Climate

Abstract The El Niño‐Southern Oscillation (ENSO) influences ocean wave activity across the Pacific, but its effects on island shores are modulated by local weather and selective sheltering of multi‐modal seas. Utilizing 41 years of high‐resolution wave hindcasts, we decipher the season‐ and locality‐dependent connections between ENSO and wave patterns around the Hawaiian Islands. The north and west‐facing shores, exposed to energetic northwest swells during boreal winters, experience the most pronounced ENSO‐related variability, with increased high‐surf activity during El Niño years. While the year‐round trade wind waves exhibit moderate correlation with ENSO, the basin‐wide climate influence is masked by locally accelerated trade winds in channels and around large headlands. The remarkable global‐to‐local pathway through the high‐resolution hindcast enables development of an ENSO‐based semi‐empirical wave model to statistically describe and predict severe wave conditions on vulnerable shores with potential application in coastal risk management and hazard mitigation for Pacific Islands and beyond.

Zhao, Sen [Department of Atmospheric Sciences Scho↗