Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “partial differential equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

A gradient-based deep neural network model for simulating multiphase flow in porous media

We report simulation of multiphase flow in porous media is crucial for the effective management of subsurface energy and environment-related activities. The numerical simulators used for modeling such processes rely on spatial and temporal discretization of the governing mass and energy balance partial-differential equations (PDEs) into algebraic systems via finite-difference/volume/element methods. These simulators usually require dedicated software development and maintenance, and suffer low efficiency from a runtime and memory standpoint for problems with multi-scale heterogeneity, coupled-physics processes or fluids with complex phase behavior. Therefore, developing cost-effective, data-driven models can become a practical choice, and in this work, we choose deep learning approaches as they can handle high dimensional data and accurately predict state variables with strong nonlinearity. In this paper, we describe a gradient-based deep neural network (GDNN) constrained by the physics related to multiphase flow in porous media. We tackle the nonlinearity of flow in porous media induced by rock heterogeneity, fluid properties, and fluid-rock interactions by decomposing the nonlinear PDEs into a dictionary of elementary differential operators. We use a combination of operators to handle rock spatial heterogeneity and fluid flow by advection. Since the augmented differential operators are inherently related to the physics of fluid flow, we treat them as first principles prior knowledge to regularize the GDNN training. We use the example of pressure management at geologic CO 2 storage sites, where CO 2 is injected in saline aquifers and brine is produced, and apply GDNN to construct a predictive model that is trained with physics-based simulation data and emulates the physics process. We demonstrate that GDNN can effectively predict the nonlinear patterns of subsurface responses, including the temporal and spatial evolution of the pressure and saturation plumes. We also successfully extend the GDNN to convolutional neural network (CNN), namely gradient-based CNN (GCNN), and validate its capability to improve the prediction accuracy. GDNN has great potential to tackle challenging problems that are governed by highly nonlinear physics and enable the development of data-driven models with higher fidelity.

42 ENGINEERING↗

A comprehensive study of non-adaptive and residual-based adaptive sampling for physics-informed neural networks

Physics-informed neural networks (PINNs) have shown to be effective tools for solving both forward and inverse problems of partial differential equations (PDEs). PINNs embed the PDEs into the loss of the neural network using automatic differentiation, and this PDE loss is evaluated at a set of scattered spatio-temporal points (called residual points). The location and distribution of these residual points are highly important to the performance of PINNs. However, in the existing studies on PINNs, only a few simple residual point sampling methods have mainly been used. Here, we present a comprehensive study of two categories of sampling for PINNs: non-adaptive uniform sampling and adaptive nonuniform sampling. We consider six uniform sampling methods, including (1) equispaced uniform grid, (2) uniformly random sampling, (3) Latin hypercube sampling, (4) Halton sequence, (5) Hammersley sequence, and (6) Sobol sequence. We also consider a resampling strategy for uniform sampling. To improve the sampling efficiency and the accuracy of PINNs, we propose two new residual-based adaptive sampling methods: residual-based adaptive distribution (RAD) and residual-based adaptive refinement with distribution (RAR-D), which dynamically improve the distribution of residual points based on the PDE residuals during training. Hence, we have considered a total of 10 different sampling methods, including six non-adaptive uniform sampling, uniform sampling with resampling, two proposed adaptive sampling, and an existing adaptive sampling. We extensively tested the performance of these sampling methods for four forward problems and two inverse problems in many setups. Our numerical results presented in this study are summarized from more than 6000 simulations of PINNs. Here, we show that the proposed adaptive sampling methods of RAD and RAR-D significantly improve the accuracy of PINNs with fewer residual points for both forward and inverse problems. Furthermore, the results obtained in this study can also be used as a practical guideline in choosing sampling methods.

97 MATHEMATICS AND COMPUTING↗

iharm3D: Vectorized General Relativistic Magnetohydrodynamics

iharm3D is an open-source C code for simulating black hole accretion systems in arbitrary stationary spacetimes using ideal general-relativistic magnetohydrodynamics (GRMHD). It is an implementation of the HARM (“High Accuracy Relativistic Magnetohydrodynamics”) algorithm outlined in Gammie et al. (2003) with updates as outlined in McKinney & Gammie (2004) and Noble et al. (2006). The code is most directly derived from Ryan et al. (2015) but with radiative transfer portions removed. HARM is a conservative finite-volume scheme for solving the equations of ideal GRMHD, a hyperbolic system of partial differential equations, on a logically Cartesian mesh in arbitrary coordinates.

79 ASTRONOMY AND ASTROPHYSICS↗

Parallel Algebraic Multigrid for Fusion and Higher-Order PDEs

Multigrid methods play a key role in large-scale scientific simulation because they are among the fastest and most scalable approaches for solving the underlying sparse linear systems of equations that arise from a wide array of Partial Differential Equation (PDE) discretizations. Algebraic multigrid (AMG) is a special type of multigrid method that depends only on the description of the linear system, giving it better portability and broader applicability than geometric multigrid, as it requires no explicit knowledge of the problem geometry. Even though these methods are widely used today, there are still applications where further development is needed. In this report, we focus on PDEs with higher-order terms (e.g., fourth order), concentrating on a PDE that arises in tokamak edge plasma simulations (a tokamak is a machine that confines a plasma using magnetic fields and is believed to be the leading plasma confinement concept for future fusion power plants). General multigrid relaxes a linear system on coarser grids and reverses this process with interpolation, but standard AMG methods struggle with the aforementioned higher-order PDEs. We investigate cyclic coarsening and interpolation heuristics, as well as new iterative approximation methods of refining the solution at each grid to improve the existing multigrid approach. To this end, we ensure that these techniques are transferable to a parallelized setting with LLNL’s supercomputers.

97 MATHEMATICS AND COMPUTING↗

A numerical investigation of film cooling as an alternate thermal protection system for spacecraft during atmospheric reentry

Research was undertaken to determine the mass required to protect a surface during atmospheric reentry by injecting a cold gas tangentially along the surface. A consideration of this problem revealed that the boundary layer equations could be employed to approximate the most important flow configurations which occur in film cooling. However, even with this simplification, the equations to be solved are complex, nonlinear, coupled partial differential equations. Due to the relative weakness of classical methods of boundary layer analysis, finite difference methods were chosen as the best approach to the formidable problem under consideration. Instead of blindly adopting a proposed technique and trying to force it to the problem, a more systematic study was deemed to be not only desirable but necessary. A relatively basic study of the application of finite difference methods was undertaken with the objective of developing an algorithm capable of obtaining accurate solutions to film cooling problems.

Clausing, A. M.↗

Fast direct numerical solution of the nonhomogeneous Cauchy-Riemann equations

A fast direct (noniterative) 'Cauchy-Riemann Solver' is developed for solving the finite-difference equations representing systems of first-order elliptic partial differential equations in the form of the nonhomogeneous Cauchy-Riemann equations. The method is second-order accurate and requires approximately the same computer time as a fast cyclic-reduction Poisson solver. The accuracy and efficiency of the direct solver are demonstrated in an application to solving an example problem in aerodynamics: subsonic inviscid flow over a biconvex airfoil. The analytical small-perturbation solution contains singularities, which are captured well by the computational technique. The algorithm is expected to be useful in nonlinear subsonic and transonic aerodynamics.

Lomax, H.↗

Finite difference procedure for boundary layers including effects of longitudinal and transverse curvatures

A second order viscous layer solution procedure has been developed that does in a consistent way include curvature effects and the corresponding normal pressure gradients. In the present system, the normal momentum equation is retained. The parabolic system of nonlinear partial differential equations is converted by linear finite differencing procedures to a system of linear algebraic equations and solved in primitive coordinates. The solutions have been shown to give smooth stable distributions for all the variables, most particularly the normal velocity which plays an important role in the interaction procedure. An algorithm for matching the viscous layer solution with a rotational characteristics outer solution has been developed.

Tassa, Y.↗

Derivation of an integral equation for transonic flows

It is noted that the nonlinear partial differential equation for the perturbation velocity potential and boundary conditions describing steady inviscid compressible transonic flow past a thin two-dimensional airfoil can be transformed into a singular integrodifferential equation and that differentiation of the latter yields an integral equation. Two forms of this integral equation currently exist: one for the singularity that is enclosed in an infinitely long strip of vanishing thickness and the other for the singularity that is enclosed in a vanishing circle. In the present article, a more general integral equation is derived by enclosing the singularity in a vanishing rectangular cavity of arbitrary aspect ratio. The two existing forms of this equation are deduced as special cases distinguished by the respective values for the aspect ratio (infinity for the first form and unity for the second).

Ogana, W.↗

Boundary-layer effects in composite laminates: Free-edge stress singularities, part 6

A rigorous mathematical model was obtained for the boundary-layer free-edge stress singularity in angleplied and crossplied fiber composite laminates. The solution was obtained using a method consisting of complex-variable stress function potentials and eigenfunction expansions. The required order of the boundary-layer stress singularity is determined by solving the transcendental characteristic equation obtained from the homogeneous solution of the partial differential equations. Numerical results obtained show that the boundary-layer stress singularity depends only upon material elastic constants and fiber orientation of the adjacent plies. For angleplied and crossplied laminates the order of the singularity is weak in general.

Wanag, S. S.↗

On conforming mixed finite element methods for incompressible viscous flow problems

The application of conforming mixed finite element methods to obtain approximate solutions of linearized Navier-Stokes equations is examined. Attention is given to the convergence rates of various finite element approximations of the pressure and the velocity field. The optimality of the convergence rates are addressed in terms of comparisons of the approximation convergence to a smooth solution in relation to the best approximation available for the finite element space used. Consideration is also devoted to techniques for efficient use of a Gaussian elimination algorithm to obtain a solution to a system of linear algebraic equations derived by finite element discretizations of linear partial differential equations.

Gunzburger, M. D↗

Numerical computation of transonic flow governed by the full-potential equation

Basic concepts associated with the numerical solution of elliptic partial differential equations are introduced, and procedures used to solve the full potential equation for transonic flow fields are discussed. Governing equations, classical relaxation schemes and concepts regarding transonic, full potential equation algorithms are covered. The equation transformation and grid generation procedures; full potential spatial differencing schemes; full potential iteration schemes, emphasizing convergence acceleration; and three dimensional applications are presented.

Holst, T. L.↗

Automating the parallel processing of fluid and structural dynamics calculations

The NASA Lewis Research Center is actively involved in the development of expert system technology to assist users in applying parallel processing to computational fluid and structural dynamic analysis. The goal of this effort is to eliminate the necessity for the physical scientist to become a computer scientist in order to effectively use the computer as a research tool. Programming and operating software utilities have previously been developed to solve systems of ordinary nonlinear differential equations on parallel scalar processors. Current efforts are aimed at extending these capabilities to systems of partial differential equations, that describe the complex behavior of fluids and structures within aerospace propulsion systems. This paper presents some important considerations in the redesign, in particular, the need for algorithms and software utilities that can automatically identify data flow patterns in the application program and partition and allocate calculations to the parallel processors. A library-oriented multiprocessing concept for integrating the hardware and software functions is described.

Arpasi, Dale J.↗

Self-consistent inclusion of space-charge in the traveling wave tube

It is shown how the complete field of the electron beam may be incorporated into the transmission line model theory of the traveling wave tube (TWT). The fact that the longitudinal component of the field due to the bunched beam is not used when formulating the beam-to-circuit coupling equation is not well-known. The fundamental partial differential equation for the traveling wave field is developed and compared with the older (now standard) one. The equation can be solved numerically using the same algorithms, but now the coefficients can be updated continuously as the calculation proceeds down the tube. The coefficients in the older equations are primarily derived from preliminary measurements and some trial and error. The newer coefficients can be found by a recursive method, since each has a well defined physical interpretation and can be calculated once a reasonable first trial solution is postulated. The results of the new expression were compared with those of the older forms, as well as to a field theory model to show the ease in which a reasonable fit to the field prediction is obtained. A complete summary of the existing transmission line modeling of the TWT is given to explain the somewhat vague ideas and techniques in the general area of drifting carrier-traveling circuit wave interactions. The basic assumptions and inconsistencies of the existing theory and areas of confusion in the general literature are examined and hopefully cleared up.

Freeman, Jon C.↗

Automating the parallel processing of fluid and structural dynamics calculations

The NASA Lewis Research Center is actively involved in the development of expert system technology to assist users in applying parallel processing to computational fluid and structural dynamic analysis. The goal of this effort is to eliminate the necessity for the physical scientist to become a computer scientist in order to effectively use the computer as a research tool. Programming and operating software utilities have previously been developed to solve systems of ordinary nonlinear differential equations on parallel scalar processors. Current efforts are aimed at extending these capabilties to systems of partial differential equations, that describe the complex behavior of fluids and structures within aerospace propulsion systems. This paper presents some important considerations in the redesign, in particular, the need for algorithms and software utilities that can automatically identify data flow patterns in the application program and partition and allocate calculations to the parallel processors. A library-oriented multiprocessing concept for integrating the hardware and software functions is described.

Arpasi, Dale J.↗

A recursive approach to the equations of motion for the maneuvering and control of flexible multi-body systems

Interest lies in a mathematical formulation capable of accommodating the problem of maneuvering a space structure consisting of a chain of articulated flexible substructures. Simultaneously, any perturbations from the 'rigid body' maneuvering and any elastic vibration must be suppressed. The equations of motion for flexible bodies undergoing rigid body motions and elastic vibrations can be obtained conveniently by means of Lagrange's equations in terms of quasi-coordinates. The advantage of this approach is that it yields equations in terms of body axes, which are the same axes that are used to express the control forces and torques. The equations of motion are nonlinear hybrid differential quations. The partial differential equations can be discretized (in space) by means of the finite element method or the classical Rayleigh-Ritz method. The result is a set of nonlinear ordinary differential equations of high order. The nonlinearity can be traced to the rigid body motions and the high order to the elastic vibration. Elastic motions tend to be small when compared with rigid body motions.

Kwak, Moon K.↗

PDEMOD: Software for control/structures optimization

Because of the possibility of adverse interaction between the control system and the structural dynamics of large, flexible spacecraft, great care must be taken to ensure stability and system performance. Because of the high cost of insertion of mass into low earth orbit, it is prudent to optimize the roles of structure and control systems simultaneously. Because of the difficulty and the computational burden in modeling and analyzing the control structure system dynamics, the total problem is often split and treated iteratively. It would aid design if the control structure system dynamics could be represented in a single system of equations. With the use of the software PDEMOD (Partial Differential Equation Model), it is now possible to optimize structure and control systems simultaneously. The distributed parameter modeling approach enables embedding the control system dynamics into the same equations for the structural dynamics model. By doing this, the current difficulties involved in model order reduction are avoided. The NASA Mini-MAST truss is used an an example for studying integrated control structure design.

Taylor, Lawrence W., Jr.↗

Stabilization of Hypersonic Boundary Layers by Linear and Nonlinear Optimal Perturbations

The effect of stationary, finite-amplitude, linear and nonlinear optimal perturbations on the modal disturbance growth in a Mach 6 axisymmetric flow over a 7 deg. half-angle cone with 0:126 mm nose radius and 0:305 m length is investigated. The freestream parameters (M = 6, Re(exp 1) = 18 x 10(exp. 6) /m) are selected to match the flow conditions of a previous experiment in the VKI H3 hypersonic tunnel. Plane-marching parabolized stability equations are used in conjunction with a partial-differential equation based planar eigenvalue analysis to characterize the boundary layer instability in the presence of azimuthally periodic streaks. The streaks are observed to stabilize nominally planar Mack mode instabilities, although oblique Mack mode and first-mode disturbances are destabilized. Experimentally measured transition onset in the absence of any streaks correlates with an amplification factor of N = 6 for the planar Mack modes. For high enough streak amplitudes, the transition threshold of N = 6 is not reached by the Mack mode instabilities within the length of the cone; however, subharmonic first-mode instabilities, which are destabilized by the presence of the streaks, do reach N = 6 near the end of the cone. The highest stabilization is observed at streak amplitudes of approximately 20 percent of the freestream velocity. Because the use of initial disturbance profiles based on linear optimal growth theory may yield suboptimal control in the context of nonlinear streaks, the computational predictions are extended to nonlinear optimal growth theory. Results show that by using nonlinearly optimal perturbation leads to slightly enhanced stabilization of plane Mack mode disturbances as well as reduced destabilization of subharmonic first-mode disturbances.

Incompressible boundary layer↗

A scalable exponential-DG approach for nonlinear conservation laws: With application to Burger and Euler equations

In this work, we propose an Exponential DG framework for partial differential equations. We decompose 7 governing equations into linear and nonlinear parts to which we apply the discontinuous Galerkin 8 (DG) spatial discretization. In particular, we construct the linear part using Jacobian that effectively 9 capture stiff characteristics in the system. The former is integrated analytically, whereas the latter 10 is approximated. This approach i) is stable with a large Courant number (Cr > 1); ii) supports 11 high-order solutions both in time and space; iii) is computationally favorable compared to IMEX 12 DG methods with no preconditioner; iv) becomes comparable to explicit RKDG methods on uniform 13 mesh and beneficial on non-uniform grid for Euler equations; v) is scalable in a modern massively 14 parallel computing architecture due to its explicit nature of exponential time integrators and com15 pact communication stencil of DG method. Numerical results demonstrate the performance of our 16 proposed methods through various examples. We also discuss the stability and convergence analysis 17 for our exponential DG scheme in the context of Burgers equation.

42 ENGINEERING↗