Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pair distribution function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Detailed Relationship Between Local Structure Polarons and Magnetization for La1-xCaxMnO3 (0.21 lt x lt 0.45)

We present detailed local structure measurements (using the extended x-ray absorption fine structure technique) for the colossal magnetoresistive material La{sub 1-x}Ca{sub x}MnO{sub 3} (0.21 < x < 0.45) as a function of temperature and magnetic field. The local distortions of the Mn-O bonds are parameterized using {sigma}, the width of the Mn-O pair-distribution function (PDF). After subtracting thermal phonon contributions, we show that the contributions to {sigma}{sup 2} from polaron and Jahn-Teller (JT) distortions, {sigma}{sub JT/polaron}{sup 2}, are a universal function of the magnetization, independent of how the magnetization is achieved via changes in temperature or magnetic field. However this universal behavior is only observed for B fields {ge} 2 T, likely as a result of domain canting in low B fields. The resulting curve is well described by two straight lines with significantly different slopes. These regimes represent two distinctly differ distortions of the oxygen octahedra about the Mn. For low magnetizations up to {approx}65% of the theoretical maximum magnetization, M{sub T}, the slope is low and the distortion removed as the sample becomes magnetized is small - we argue this arises from polarons which have a low distortion around two (or possibly three) Mn sites. At high magnetizations large distortions per Mn site are removed as these sites become magnetized. The data are also analyzed in terms of a two Mn-O peak distribution using experimental standards for Mn-O. The results agree well with recent neutron PDF results but not with some earlier results. We discuss the limitations of assuming a two peak distribution in view of the two distortions needed to describe the Mn-O distortions as a function of T and B for B {ge} 2 T. It is likely that there is a distribution of longer bonds. Finally we show that with increasing B field, the Mn-Mn peak also has a small B-field-induced change - a measure at the unit cell level of magnetostriction but find that there is no observable B-field-induced change in the Mn-La/Ca pair distribution for fields up to {approx}10 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Suppressed Lone Pair Electrons Explain Unconventional Rise of Lattice Thermal Conductivity in Defective Crystalline Solids

Manipulating thermal properties of materials can be interpreted as the control of how vibrations of atoms (known as phonons) scatter in a crystal lattice. Compared to a perfect crystal, crystalline solids with defects are expected to have shorter phonon mean free paths caused by point defect scattering, leading to lower lattice thermal conductivities than those without defects. While this is true in many cases, alloying can increase the phonon mean free path in the Cd-doped AgSnSbSe 3 system to increase the lattice thermal conductivity from 0.65 to 1.05 W m –1 K –1 by replacing 18% of the Sb sites with Cd. It is found that the presence of lone pair electrons leads to the off-centering of cations from the centrosymmetric position of a cubic lattice. X-ray pair distribution function analysis reveals that this structural distortion is relieved when the electronic configuration of the dopant element cannot produce lone pair electrons. Furthermore, a decrease in the Grüneisen parameter with doping is experimentally confirmed, establishing a relationship between the stereochemical activity of lone pair electrons and the lattice anharmonicity. The observed “harmonic” behavior with doping suggests that lone pair electrons must be preserved to effectively suppress phonon transport in these systems.

36 MATERIALS SCIENCE↗

A comparison of the dielectric function for p-point water models

We compute the longitudinal dielectric function ɛl(k) for p-point water models, p = 3 (SPC/E, TIP3P), p = 4 (TIP4P-EW, OPC), and p = 5 (TIP5P-E) from the charge–charge fluctuation function SZZ(k), obtained from two methods: average of the charge in k-space (method:sum) and from the pair distribution function in Fourier space (method:integral). The latter requires a continuation to small k-values, which we thoroughly discuss. We conclude with a detailed comparison of the longitudinal dielectric function for the different p-point models and its main characteristics: small k and large k limits, position of the poles, and its (complex) zeros.

Shevy, Noah [Ames National Laboratory, Department ↗

Solving the structure of metakaolin

Metakaolin has been used extensively as a cement additive and paint extender, and recently as a geopolymer precursor. This disordered layered aluminosilicate is formed via the dehydroxylation of kaolinite. However, an accurate representation of its atomic structure has bever before been presented. Here, a novel synergy between total scattering and density functional modeling is presented to solve the structure of metakaolin. The metastable structure is elucidated by iterating between least-squares real-space refinement using neutron pair distribution function data, and geometry optimization using density functional modeling. The resulting structural representation is both energetically feasible and in excellent agreement with experimental data. This accurate structure of metakaolin provides new insight into the local environment of the aluminum atoms, with evidence of the existence of tri-coordinated aluminum. By the availability of this detailed atomic description, there exists the opportunity to tailor chemical and mechanical processes involving metakaolin at the atomic level to obtain optimal performance at the macro-scale.

36 MATERIALS SCIENCE↗

Insights on the structure and properties of sodium iron phosphate glasses from molecular dynamics simulations

Iron phosphate glasses are promising nuclear waste forms while more detailed understanding of their structures and structure-property relations are still needed to better design waste glass compositions. In this work we report studies of three series of sodium iron phosphate (NFP) glasses: 60P 2 O 5 -(40-x)Fe 2 O 3 -xNa 2 O (x = 0→40), (100–2x)P 2 O 5 -xFe 2 O 3 -xNa 2 O (x = 5→17.5) and one with different iron redox ratio, to understand the composition as well as the iron redox effects on the structure and properties of these glasses using molecular dynamics simulations with effective two-body and three-body potentials. Structural analyses, including pair distribution function, bond angle distribution, Q n distribution, and polyhedral connectivity, were performed to obtain in-depth information on short-range and medium-range structural features. The P-O pair distributions showed a first peak splitting with phosphorus-bridging and non-bridging oxygen contributions. This and the average P-O and other cation-oxygen bond distances are in excellent agreement with experiments. The coordination number of P 5+ remained four while that of Fe 3+ increased from 4.30 to 4.72 with decreasing Fe/Na ratio. Polyhedral linkage analysis showed [PO 4 ] units linked with [PO 4 ] and [FeO x ] through corner-sharing while the [PO 4 ]-[FeO x ] linkages become dominant for compositions with Fe 2 O 3 larger than 15 mol%. The effect of iron redox ratio on the structure of NFP glasses was also studied and it was found that bond lengths and coordination numbers were not strongly affected, while the reduction of iron introduced higher network distortions, as evident by O-P-O bond angle and Q n distribution. The glass transition temperature (T g ) showed a monotonic increase with Fe 2 O 3 in the first series, in good agreement with experiments, while those of the second series showed a maximum at P 2 O 5 = 82 mol%. Here, calculated elastic moduli were found to increase with Fe 2 O 3 in the first glass series, which was be explained by the increase of network connectivity, while those of the second series decrease with Fe 2 O 3 due to decrease of P 2 O 5 .

36 MATERIALS SCIENCE↗

Molybdenum polysulfide chalcogels as high-capacity, anion-redox-driven electrode materials for Li-ion batteries

Sulfur cathodes in conversion reaction batteries offer high gravimetric capacity but suffer from parasitic polysulfide shuttling. We demonstrate here that transition metal chalcogels of approximate formula MoS 3.4 achieve a high gravimetric capacity close to 600 mAh g –1 (close to 1000 mAh g –1 on a sulfur basis) as electrode materials for lithium-ion batteries. Transition metal chalcogels are amorphous and comprise polysulfide chains connected by inorganic linkers. The linkers appear to act as a “glue” in the electrode to prevent polysulfide shuttling. The Mo chalcogels function as electrodes in carbonate- and ether-based electrolytes, which further provides evidence of polysulfide solubility not being a limiting issue. We employ X-ray spectroscopy and operando pair distribution function techniques to elucidate the structural evolution of the electrode. Raman and X-ray photoelectron spectroscopy track the chemical moieties that arise during the anion-redox-driven processes. As a result, we find the redox state of Mo remains unchanged across the electrochemical cycling and, correspondingly, the redox is anion-driven.

25 ENERGY STORAGE↗

Structural characterization of ZnSO 4 -K 2 SO 4 -NaCl glasses

Glasses with compositions xNaCl-(50-x/2)K 2 SO 4 -(50-x/2)ZnSO 4 , x = 0 to 30 (in mol%), were characterized via vibrational spectroscopy and X-ray pair distribution function (xPDF) analysis. The xPDF's were modeled using Empirical Potential Structure Refinement (EPSR). From the modeled xPDF, the deconvoluted xPDFs were obtained along with cation-anion coordination numbers. The sulfate environment was elucidated through analysis of the vibrational spectroscopy paired with xPDFs. As determined via these techniques, the SO 4 2– oxyanions remain as distinct tetrahedra and dominate the overall structure of these ionic glasses, even with up to 30 mol% addition of NaCl. Addition of NaCl lowers the glass transition temperature (T g ) of these materials and increases the temperature between T g and the first crystallization temperature upon heating, as determined by differential thermal analysis (DTA). As a result, the composition-dependent xPDFs indicate that chloride ions are distributed equally and increasingly around Zn, K, and Na cations as x increases.

36 MATERIALS SCIENCE↗

Critical point of gas-liquid type phase transition and phase equilibrium functions in developed two-component plasma model

A two-component plasma model, which we called a “shelf Coulomb” model has been developed in this work. A Monte Carlo study has been undertaken to calculate equations of state, pair distribution functions, internal energies, and other thermodynamics properties. A canonical NVT ensemble with periodic boundary conditions was used. The motivation behind the model is also discussed in this work. The “shelf Coulomb” model can be compared to classical two-component (electron-proton) model where charges with zero size interact via a classical Coulomb law. With important difference for interaction of opposite charges: electrons and protons interact via the Coulomb law for large distances between particles, while interaction potential is cut off on small distances. The cut off distance is defined by an arbitrary ε parameter, which depends on system temperature. All the thermodynamics properties of the model depend on dimensionless parameters ε and γ = βe{sup 2}n{sup 1/3} (where β = 1/k{sub B}T, n is the particle's density, k{sub B} is the Boltzmann constant, and T is the temperature) only. In addition, it has been shown that the virial theorem works in this model. All the calculations were carried over a wide range of dimensionless ε and γ parameters in order to find the phase transition region, critical point, spinodal, and binodal lines of a model system. The system is observed to undergo a first order gas-liquid type phase transition with the critical point being in the vicinity of ε{sub crit}≈13(T{sub crit}{sup *}≈0.076),γ{sub crit}≈1.8(v{sub crit}{sup *}≈0.17),P{sub crit}{sup *}≈0.39, where specific volume v* = 1/γ{sup 3} and reduced temperature T{sup *} = ε{sup −1}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Short-range order in Fe-based metallic glasses: Wide-angle X-ray scattering studies

The local atomic structure of the Fe{sub 80}B{sub 20}, Fe{sub 70}Nb{sub 10}B{sub 20} and Fe{sub 62}Nb{sub 8}B{sub 30} glasses prepared in the form of ribbons has been studied by wide-angle X-ray scattering. Structural information about the amorphous ribbons has been derived from analysis of the radial distribution functions using the least-squares curve-fitting method. The obtained structural parameters indicate that Fe–Fe, Fe–B, Fe–Nb and Nb–B contributions are involved in the near-neighbor coordination spheres. The possible similarities of the local atomic arrangement in the investigated glasses and the crystalline Fe{sub 3}B, Fe{sub 23}B{sub 6} and bcc Fe structures are also discussed. - Graphical abstract: Pair distribution functions (a) and best-fit model and experimental radial distribution functions for Fe{sub 80}B{sub 20} (b), Fe{sub 70}Nb{sub 10}B{sub 20} (c) and Fe{sub 62}Nb{sub 8}B{sub 30} (d) metallic glasses. - Highlights: • The short-range ordering in the Fe-based metallic glasses is presented. • The results of RDF function have been analyzed using the least-squares method. • The Fe–Fe, Fe–B, Fe–Nb or Nb–B contributions are involved in coordination spheres. • The structural unit is distorted triangular prism containing B, Fe or Nb atoms. • Similarities of atomic arrangement in glassy and crystalline structures are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tan relations in one dimension

We derive exact relations that connect the universal C/k{sup 4}-decay of the momentum distribution at large k with both thermodynamic properties and correlation functions of two-component Fermi gases in one dimension with contact interactions. The relations are analogous to those obtained by Tan in the three-dimensional case and are derived from an operator product expansion of the one- and two-particle density matrix. They extend earlier results by Olshanii and Dunjko (2003) for the bosonic Lieb-Liniger gas. As an application, we calculate the pair distribution function at short distances and the dimensionless contact in the limit of infinite repulsion. The ground state energy approaches a universal constant in this limit, a behavior that also holds in the three-dimensional case. In both one and three dimensions, a Stoner instability to a saturated ferromagnet for repulsive fermions with zero range interactions is ruled out at any finite coupling. - Highlights: > We derive universal relations for the two-component, contact-interacting 1D Fermi gas. > These relations connect the tail of the momentum distribution to thermodynamic properties. > There is no saturated ferromagnetism at finite, repulsive couplings for the 3D model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Properties of carbon up to 10 million kelvin from Kohn-Sham density functional theory molecular dynamics

Accurately modeling dense plasmas over wide-ranging conditions of pressure and temperature is a grand challenge critically important to our understanding of stellar and planetary physics as well as inertial confinement fusion. In this work, we employ Kohn-Sham density functional theory (DFT) molecular dynamics (MD) to compute the properties of carbon at warm and hot dense matter conditions in the vicinity of the principal Hugoniot. In particular, we calculate the equation of state (EOS), Hugoniot, pair distribution functions, and diffusion coefficients for carbon at densities spanning 8 g/$\mathrm{cm^3}$ to 16 g/$\mathrm{cm^3}$ and temperatures ranging from 100 kK to 10 MK using the Spectral Quadrature method. Here, we find that the computed EOS and Hugoniot are in good agreement with path integral Monte Carlo results and the sesame database. Additionally, we calculate the ion-ion structure factor and viscosity for selected points. All results presented are at the level of full Kohn-Sham DFT-MD, free of empirical parameters, average-atom, and orbital-free approximations employed previously at such conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

P[subscript H2O]-dependent structural phase transitions in the zeolite mesolite: Real- and reciprocal-space crystal structure refinements

The response of the mesolite crystal structure (Na{sub 16}Ca{sub 16}Al{sub 48}Si{sub 72}O{sub 240}{center_dot}64H{sub 2}O) to dehydration was evaluated as a function of temperature and partial pressure of water (i.e., P{sub H{sub 2}O} or relative humidity, RH) using laboratory X-ray powder diffraction (XRD; CuK{sub {alpha}} radiation) and synchrotron X-ray pair distribution function (PDF) methods. At 425 C under low-P{sub H{sub 2}O} conditions (P{sub H{sub 2}O} {le} {approx}1.3 mbar), dehydrated mesolite preserved the long-range ordered aluminosilicate framework structure, which has not been previously observed. This new dehydrated phase, x-metamesolite, has unit-cell parameters [a = 16.731(3) {angstrom}, b = 17.822(2) {angstrom}, c = 6.312(1) {angstrom}, V = 1882.5(5) {angstrom}{sup 3}, and possible space group Fdd2] similar to those of other dehydrated natrolite phases (either 1- or 2-metanatrolite). Conversely, under high-P{sub H{sub 2}O} conditions (P{sub H{sub 2}O} > {approx}1.3 mbar), dehydrated mesolite became amorphous (amorphous T{sub 5}O{sub 10}) at 425 C. The local structure of amorphous T{sub 5}O{sub 10} was characterized by PDF analyses, which showed the formation of twisted T{sub 5}O{sub 10} nano-fibers [with dimensions (LWH) of {approx}6.9 x 6.9 x 6.3 {angstrom}] resulting from breakage of the mesolite aluminosilicate framework. The two distinct high-temperature P{sub H{sub 2}O}-dependent phase transition paths illustrate the importance of considering the combined effects of temperature and P{sub H{sub 2}O} in mesolite. In addition, the low-temperature phase transition in mesolite, involving order-disorder of the extraframework cations, also showed a P{sub H{sub 2}O}-dependent transition temperature. Although, there is no path dependence on P{sub H{sub 2}O} for this transition, the local arrangement of Na, Ca, and vacancies in disordered metamesolite (formed through the extraframework cation order-disorder phase transition) likely influences the thermal stability of the aluminosilicate framework during further heating.

36 MATERIALS SCIENCE↗

Influence of Al location on formation of silver clusters in mordenite

Formation of zeolite supported Ag 0 clusters depends on a combination of thermodynamically stable atomic configurations, charge balance considerations, and mobility of species on the surface and within pores. Periodic density functional theory (DFT) calculations were performed to evaluate how the location of Al in the mordenite (MOR) framework and humidity control Ag 0 nanocluster formation. Four Al framework sites were studied (T1-T4) and the Al positions in the framework were identified by the shifts in the differential Al…Al pair distribution function (PDF). Furthermore, structural information about the Ag 0 nanoclusters, such as dangling bonds, can be identified by Ag…Ag PDF data. For Ag 0 formation in vacuum MOR structures with a Si:Al ratio of 5:1 with Al in the T1 position resulted in the most framework flexibility and the lowest Ag 0 nanocluster charge, indicating the best result for formation of charge neutral nanoclusters. When water is present, Al in the T3 and T4 positions results in the formation of the smallest average Ag 0 nanoclusters plus greater expansion of the O-T-O bond angle than in vacuum, indicating easier diffusion of the Ag 0 nanoclusters to the surface. Here, the presence of Al in 4-membered rings and in pairs indicates favorable MOR structures for formation of single Ag atoms, despite the existence of synthesis challenges. Therefore, Al in the T2 position is the least favorable for Ag 0 nanocluster formation in both vacuum and in the presence of water. Al in the T1, T3, and T4 positions provides beneficial effects through framework flexibility and changes in nanocluster size or charge that can be leveraged for design of zeolites for formation of metallic nanoclusters.

36 MATERIALS SCIENCE↗

Atomic-Layer-Deposited Aluminum Oxide Thin Films Probed with X-ray Scattering and Compared to Molecular Dynamics and Density Functional Theory Models

A better understanding of amorphous aluminum oxide’s structure and electronic properties is obtained through combined experimental and computational approaches. Grazing incidence X-ray scattering measurements were carried out on aluminum oxide thin films grown using thermal atomic layer deposition. The corresponding pair distribution functions (PDFs) showed structures similar to previously reported PDFs of solid-state amorphous alumina and molten alumina. Structural models based on crystalline alumina polymorphs (PDFgui) and amorphous alumina (molecular dynamics, MD) were examined for structural comparisons to the experimental PDF data. Smaller MD models were optimized and verified against larger models to allow for quantum chemical electronic structure calculations. The electronic structure of the amorphous alumina models yields additional insight into the band structure and electronic defects present in amorphous alumina that are not present in crystalline samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗