Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Coulomb Description of High-Energy Charge-Exchange Monopole Excitations in Medium-Heavy Spherical Nuclei

The recently proposed approach to the description of high-energy charge-exchange monopole excitations in medium-heavy spherical nuclei is implemented to quantitatively estimate the main damping parameters of the related giant resonances including the isobaric analog resonance. The approach consists in incorporating the “Coulomb description” of isospin-forbidden processes into the particle-hole dispersive optical model. The results obtained for a few parent nuclei with Z=50 and Z=82 are compared with the respective experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Lander Lighting Solution to Reduce Pilot & Autonomous Approach Errors

The south pole lighting environment will have harsh low inclination sunlight, making overhead judgement of surface features difficult. Autonomous solutions are great, however, the need for visual monitoring and independent go/no-go decisions remain. Our project proposes that lunar landing systems will be better served by including a powerful landing light system that improves visibility of surfaces from overhead by illuminating the ground at critical distances for the crew to make last minute decisions regarding an approach. The project utilized computer-based optical modeling software to predict requirements for a potential landing light system. The analysis based the lamp prediction from commercially available LED chip sets and lamp optics. The goal was to illustrate a method to raise the surface contrast of a landing site within an acceptable contrast threshold for most camera systems and human observers to recognize hazards that would not be noticed with low inclination sunlight alone. The Apollo lunar landings benefitted from overhead sun or dark conditions. The surface lighting at the Lunar South Pole is a harsh environment where surfaces are lit from a low inclination angle by the sun (from the side). This change in lighting condition precipitates a need for updated lunar landing systems that facilitate improved recognition of landing sites, and thereby increase pilot awareness of landing hazards. The reliance on LIDAR and other autonomous mechanisms alone is risky given the known usage of visual monitoring for operator concurrence on current spacecraft programs and present-day autonomous land-based vehicles. Visual monitoring via cameras or windows requires the surface contrast to be within 3 orders of magnitude for reasonable recognition of objects. Artificial overhead illumination, when sufficiently sized, provides a means to even out contrast problems created by low inclination sunlight, potentially reducing piloting errors. Current vehicle requirements do not specify this type of guidance for the purpose of increasing mission success. An optical ray-trace simulation model was developed in Zemax Optics Studio to predict the best combination of LED power, LED optics, lamp quantity, and lamp location to raise the surface contrast to within 2 orders of magnitude from 3 orders required to further increased visibility and reduce risk. The project considered the following design constraints: potential base diameter of lander, approach distance(s) for a go-no-go decision point (200 meter), solar inclination angle (2-7), lunar surface reflectance (10%), LED chip sets, LED focusing optics, LED power, lamp quantity, lamp locations, and illumination diameter of lunar surface landing zone. The results can be used to establish minimum design constraints for vehicle landing light systems. With a solar inclination angle ranging from 2-7 degrees, the horizontal illumination of the lunar surface is attenuated by about 10% when compared to overhead illumination from the Sun. This modifies the sun's maximum of 130,000 lux to 13,000 lux horizontal illuminance. The artificial lighting system was designed to provide an 18-meter-wide illumination zone, to create viewing clearances around a 6-meter-wide lander. The system provides an average illuminance of 300 lux, meeting the 2 orders of magnitude criteria. The solution utilized modern Chip On Board LEDs, that each utilized 17 watts, with focusing Total Internal Reflection (TIR) lenses. A lighting system of 300 LEDs was arrayed along the "bottom" of a “lander”. With 17 watts per LED, the system is estimated to require 5100 watts. This is a large amount of power, but it would only be needed during critical phases during the landing. LED lighting systems can be dimmed, and it is assumed that as the lander arrives closer to the landing site, the lighting system power can be adjusted as needed to produce the necessary surface illuminance. The designed reduction of contrast improves reliability of safety assessments using real time visible light camera systems and out the window viewing by the crew.

T A Clark↗

Study of the morphology and optical properties of anodic oxide layers on InAs (111)III

The effect of the electrolyte composition on the surface morphology and the dispersion dependences of the refractive index and extinction coefficient of {approx}20-nm-thick anodic layers on InAs (111)III substrates is studied by atomic force microscopy and spectral ellipsometry. It is shown that oxidation in electrolytes with different acidities does not modify the surface morphology of the initial InAs substrates. The films formed upon oxidation exhibit close dispersion dependences, despite the difference in the chemical composition between the films. This makes possible the high-precision monitoring of the thickness of anodic layers on InAs substrates by means of ellipsometry with the optical model of a single-layer isotropic film on an absorbing substrate.

36 MATERIALS SCIENCE↗

Stellar reaction rate for {sup 22}Mg+p->{sup 23}Al from the asymptotic normalization coefficient in the mirror nuclear system {sup 22}Ne+n->{sup 23}Ne

The production of {sup 22}Na in ONe novae can be influenced by the {sup 22}Mg(p,gamma){sup 23}Al reaction. To investigate this reaction rate at stellar energies, we have determined the asymptotic normalization coefficient (ANC) for {sup 22}Mg+p->{sup 23}Al through measurements of the ANCs in the mirror nuclear system {sup 22}Ne+n->{sup 23}Ne. The peripheral neutron-transfer reactions {sup 13}C({sup 12}C,{sup 13}C){sup 12}C and {sup 13}C({sup 22}Ne,{sup 23}Ne){sup 12}C were studied. The identical entrance and exit channels of the first reaction make it possible to extract independently the ground-state ANC in {sup 13}C. Our experiment gives C{sub p{sub 1/2}}{sup 2}({sup 13}C)=2.24+-0.11 fm{sup -1}, which agrees with the value obtained from several previous measurements. The weighted average for all the obtained C{sub p{sub 1/2}}{sup 2} is 2.31+-0.08 fm{sup -1}. This value is adopted to be used in obtaining the ANCs in {sup 23}Ne. The differential cross sections for the reaction {sup 13}C({sup 22}Ne,{sup 23}Ne){sup 12}C leading to the J{sup {pi}}=5/2{sup +} and 1/2{sup +} states in {sup 23}Ne have been measured at 12 MeV/u. Optical model parameters for use in the DWBA calculations were obtained from measurements of the elastic scatterings {sup 22}Ne+{sup 13}C and {sup 22}Ne+{sup 12}C. The extracted ANC for the ground state in {sup 23}Ne, C{sub d{sub 5/2}}{sup 2}=0.86+-0.08+-0.12 fm{sup -1}, is converted to its corresponding value in {sup 23}Al using mirror symmetry to give C{sub d{sub 5/2}}{sup 2}({sup 23}Al)=(4.63+-0.77)x10{sup 3} fm{sup -1}. The astrophysical S factor S(0) for the {sup 22}Mg(p,gamma) reaction was determined to be 0.96+-0.11 keV b. The consequences for nuclear astrophysics are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Optical properties of anodically degraded ZnO

We discuss the optical properties of non-degraded and anodically degraded boron-doped zinc oxide (ZnO:B) deposited by low-pressure chemical vapour deposition on soda-lime glass. The optical model used to simulate the infrared reflectance in the wavelength range between 1.2 and 25 μm is based on the Maxwell-Garnett effective-medium theory. The model is sensitive to the conditions at the grain boundaries of the investigated polycrystalline ZnO:B films. We confirm that the presence of defect-rich grain boundaries, especially after degradation, causes a highly resistive ZnO:B film. Furthermore, indications of a degraded zinc oxide layer next to the ZnO:B/glass interface with different refractive index are found. We present evidence for the creation of oxygen vacancies, based on Raman investigations, which correlate with a shift of the optical absorption edge of the ZnO:B. Investigations with scanning and transmission electron microscopy show microvoids at the grain boundaries after anodic degradation. This indicates that the grain/grain interfaces are the principle location of defects after degradation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Relaxation of giant resonances: Semimicroscopic description (Methods, Results, and Prospects)

An account of a semimicroscopic approach to globally describing dominant relaxation modes for giant resonances in spherical nuclei is given. This approach is based on the continuum version of the random-phase approximation and on a phenomenological description of the fragmentation effect. The fragmentation effect in question is taken into account in the 'pole' approximation in terms of the excitationenergy-dependent imaginary part of the single-particle effective optical potential directly in the equations of the approximation in question. In the practical implementation of the above approach, use is made of the Landau-Migdal interaction in the particle-hole channel and a phenomenological mean field of the nucleus being considered, these two being related by a partial-consistency condition. The results obtained within this approach by calculating integrated and differential features for a number of giant resonances over a broad range of excitation energies are used to perform a comparison with available experimental data and to predict the results of possible experiments. A particle-hole optical model that serves both as a substantiation for the existing version of the semimicroscopic approach and as a basic element for describing excitations of the particle-hole type at an arbitrary (albeit rather high) energy is formulated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Secure Path to the Dripline Based on Theory and Experiment

A research program is outlined that is intended to answer the question how the properties of protons and neutrons depend on the nucleon asymmetry when the proton or neutron dripline is approached. These properties include elastic cross sections, bound single-particle properties, including removal energy, spectroscopic factors, strength distribution, one-body density matrix, and the contribution to the energy of the ground state from two-body interactions. The framework of the Green's function method is employed to link presently available data to be cast in the form of the complex potentials (including their asymmetry dependence) that govern the behavior of nucleons in a large energy window ranging more than 100 MeV above and below the Fermi energy for the Ca isotopes. This procedure employs dispersion relations between the real and imaginary parts of the potential and is referred to as the dispersive optical model (DOM) approach pioneered by Mahaux. Predictions of data for nuclei further along towards the dripline can then be obtained from extrapolation, allowing further improvements, etc.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Numerical Based Linear Model for Dipole Magnets

In this paper, we discuss an algorithm for constructing a numerical linear optics model for dipole magnets from a 3D field map. The difference between the numerical model and K. Brown's analytic approach is investigated and clarified. It was found that the optics distortion due to the dipoles' fringe focusing must be properly taken into account to accurately determine the chromaticities. In NSLS-II, there are normal dipoles with 35-mm gap and dipoles for infrared sources with 90-mm gap. This linear model of the dipole magnets is applied to the NSLS-II lattice design to match optics parameters between the DBA cells having dipoles with different gaps.

43 PARTICLE ACCELERATORS↗

Characterization of Orbital Debris Photometric Properties Derived from Laboratory-Based Measurements

To better characterize and model optical data acquired from ground-based telescopes, the Optical Measurements Center (OMC) at NASA/JSC attempts to emulate illumination conditions seen in space using equipment and techniques that parallel telescopic observations and source-target-sensor orientations. The OMC uses a 75 Watt Xenon arc lamp as a solar simulator, an SBIG CCD camera with standard Johnson/Bessel filters, and a robotic arm to simulate an object's position and rotation. The laboratory uses known shapes, materials suspected to be consistent with the orbital debris population, and three phase angles to best match the lighting conditions of the telescope based data. The fourteen objects studied in the laboratory are fragments or materials acquired through ground-tests of scaled-model satellites/rocket bodies as well as material samples in more/less "flight-ready" condition. All fragments were measured at 10 increments in a full 360 rotation at 6 , 36 , and 60 phase angles. This paper will investigate published color photometric data for a series of orbital debris targets and compare it to the empirical photometric measurements generated in the OMC. Using the data acquired over specific rotational angles through different filters (B, V, R, I), a color index is acquired (B-R, R-I). Using these values and their associated lightcurves, this laboratory data is compared to observational data obtained on the 1 m telescope of the Astronomical Institute of the University of Bern (AUIB), the 0.9 m operated by the Small- and Medium-Aperture Research Telescope System (SMARTS) Consortium and the Curtis-Schmidt 0.6 m Michigan Orbital Debris Space Debris Telescope both located at Cerro Tololo Inter-American Observatory (CTIO). An empirical based optical characterization model will be presented to provide preliminary correlations between laboratory based and telescope-based data in the context of classification of GEO debris objects.

Cowardin, H.↗

Optical bandgap of ultra-thin amorphous silicon films deposited on crystalline silicon by PECVD

An optical study based on spectroscopic ellipsometry, performed on ultrathin hydrogenated amorphous silicon (a-Si:H) layers, is presented in this work. Ultrathin layers of intrinsic amorphous silicon have been deposited on n-type mono-crystalline silicon (c-Si) wafers by plasma enhanced chemical vapor deposition (PECVD). The layer thicknesses along with their optical properties –including their refractive index and optical loss- were characterized by spectroscopic ellipsometry (SE) in a wavelength range from 250 nm to 850 nm. The data was fitted to a Tauc-Lorentz optical model and the fitting parameters were extracted and used to compute the refractive index, extinction coefficient and optical bandgap. Furthermore, the a-Si:H film grown on silicon was etched at a controlled rate using a TMAH solution prepared at room temperature. The optical properties along with the Tauc-Lorentz fitting parameters were extracted from the model as the film thickness was reduced. The etch rate for ultrathin a-Si:H layers in TMAH at room temperature was found to slow down drastically as the c-Si interface is approached. From the Tauc-Lorentz parameters obtained from SE, it was found that the a-Si film exhibited properties that evolved with thickness suggesting that the deposited film is non-homogeneous across its depth. It was also found that the degree of crystallinity and optical (Tauc) bandgap increased as the layers were reduced in thickness and coming closer to the c-Si substrate interface, suggesting the presence of nano-structured clusters mixed into the amorphous phase for the region close to the crystalline silicon substrate. Further results from Atomic Force Microscopy and Transmission Electron Microscopy confirmed the presence of an interfacial transitional layer between the amorphous film and the underlying substrate showing silicon nano-crystalline enclosures that can lead to quantum confinement effects. Quantum confinement is suggested to be the cause of the observed increase in the optical bandgap of a-Si:H films close to the a-Si:H/cSi interface.

36 MATERIALS SCIENCE↗

Advanced Elastic/Inelastic Nuclear Data Development Project

The optical model is used to analyze the elastic and inelastic scattering of nucleons, deuterons, hellions, tritons, and alpha particles by the nuclei. Since this paper covers primarily neutron-nucleus scattering, the focus will be limited to only that interaction. For the sake of this model, the nucleus is described as a blob of nuclear matter with properties based upon its number of nucleons. This infers that a single potential can describe the interaction of particles with different energies with different nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Exchange of Alpha Particle in the {sup 16}O+{sup 12}C Elastic Scattering

We have analyzed twenty elastic scattering angular distributions of the {sup 16}O+{sup 12}C system, measured at Sao Paulo Pelletron Laboratory and also data from the literature. The energies cover the region around and above Coulomb barrier, ranging from 8.54 up to 75.43 MeV in the center of mass reference frame. In the {sup 16}O+{sup 12}C scattering, two different processes can occur which result in same exit channel, the elastic scattering and the exchange of an alpha particle between projectile and target. We have used the Optical Model formalism for the elastic scattering and the DWBA to describe the alpha transfer reaction contribution. Thus, by analyzing the {sup 16}O+C elastic scattering at backward angles we have obtained the {sup 16}O{sub gs} alpha spectroscopic factor.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparison of experimental data with predictions of various models for silicon and aluminum fragmentation under the effect of high-energy cosmic rays

The accuracy attained in theoretically estimating the yields of isotopes and isobars and their energy, charge, and mass distributions in silicon fragmentation that occurs in spacecraft electronics under the effect of cosmic-ray protons is an important factor in forecasting the probability for single-event upsets in the electronics and the reliability of spacecraft operation in general. In previous studies of our group, it was shown that the results of the calculations are highly sensitive to the choice of parameters for opticalmodel potentials. In addition to cross sections for elastic and inelastic proton scattering and charge, mass, and energy distributions of heavy nuclear-reaction products, the results of our calculations for doubledifferential spectra of protons originating from the interaction of highly energetic (30-400 MeV) protons with aluminum and double-differential spectra of other particles (neutrons and alpha particles) arising in competing channels of the p + {sup 27}Al reaction are also described in the present article. The calculations in question were performed on the basis of the EMPIRE-II-19 code by using various optical-model potentials, including the Becchetti-Greenlees potential for the (p, n) channel, the Wilmore-Hodgson potential for the (p, n) channel, the Madland potential for the (p, p) channel, the Koning-Delaroche potential for the (p, p) channel, and the McFadden-Satchler potential for the (p, {alpha}) channel. A comparative analysis of the double-differential spectra obtained for outgoing protons, neutrons, and alpha particles experimentally and in the calculations of various authors was performed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Properties of high-energy isoscalar monopole excitations in medium-heavy mass spherical nuclei

The recently developed particle-hole dispersive optical model is applied to describe properties of high-energy isoscalar monopole excitations in medium-heavy mass spherical nuclei. In particular, the double transition density averaged over the energy of the isoscalar monopole excitations is considered for {sup 208}Pb in a wide energy interval, which includes the isoscalar giant monopole resonance and its overtone. The energy-averaged strength functions of these resonances are also analyzed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Global optical potential for the elastic scattering of {sup 6}He at low energies

A set of global optical potentials has been derived to describe the interactions of {sup 6}He at low energies. The elastic scattering angular distribution data measured so far for many systems, ranging from {sup 12}C to {sup 209}Bi, have been considered within the framework of the optical model to find a global potential set to describe the experimental data consistently. We report that very good agreement between theoretical and experimental results has been obtained with small {chi}{sup 2}/N values by using the derived potential set. The reaction cross section and volume integrals of the potentials have been deduced from the theoretical calculations for all studied systems at relevant energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Direct + Semidirect E1 Photoneutron Reactions: Semimicroscopic Description

The particle-hole dispersive optical model is implemented to describe together E1 photo-absorption and direct + semidirect photoneutron reactions accompanied by excitation of the giant dipole resonance. Being based on this description, a quantitative estimation of the partial and total branching ratios for direct one-neutron decay of the mentioned giant resonance in a few medium-heavy neutron-closed-shell nuclei is obtained. Calculation results are compared with corresponding experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Detection of a MoSe{sub 2} secondary phase layer in CZTSe by spectroscopic ellipsometry

We demonstrate the application of Spectroscopic Ellipsometry (SE) for identification of secondary phase MoSe{sub 2} in polycrystalline Cu{sub 2}ZnSnSe{sub 4} (CZTSe) samples. A MoSe{sub 2} reference sample was analyzed, and its optical constants (ε{sub 1} and ε{sub 2}) were extracted by SE analysis. This dataset was implemented into an optical model for analyzing SE data from a glass/Mo/CZTSe sample containing MoSe{sub 2} at the back side of the absorber. We present results on the n and k values of CZTSe and show the extraction of the thickness of the secondary phase MoSe{sub 2} layer. Raman spectroscopy and scanning electron microscopy were applied to confirm the SE results.

36 MATERIALS SCIENCE↗

Elastic scattering and total reaction cross section for the {sup 6}He+{sup 58}Ni system

Elastic scattering measurements of {sup 6}He + {sup 58}Ni system have been performed at the laboratory energy of 21.7 MeV. The {sup 6}He secondary beam was produced by a transfer reaction {sup 9}Be ({sup 7}Li, {sup 6}He) and impinged on {sup 58}Ni and {sup 197}Au targets, using the Radioactive Ion Beam (RIB) facility, RIBRAS, installed in the Pelletron Laboratory of the Institute of Physics of the University of São Paulo, Brazil. The elastic angular distribution was obtained in the angular range from 15° to 80° in the center of mass frame. Optical model calculations have been performed using a hybrid potential to fit the experimental data. The total reaction cross section was derived.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗