Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Numerical Modelling of Sublimation Losses During Sample Handling Within the Light WAVE Lunar Water Prospecting Instrument

NASA’s focus of exploring the Moon’s south pole under the Artemis program has placed new emphasis on characterizing the quantity and distribution of water ice and other volatiles present within the Moon’s permanently shadowed regions (PSRs), first measured during the 2009 LCROSS mission. NASA’s VIPER rover is the first of a series of prospecting missions to characterize this water ice resource. NASA’s Johnson Space Center (JSC) has developed the Light Water Analysis and Volatiles Extraction (Light WAVE) instrument shown in Figure 1 for a follow-on prospecting mission, designed to be a rover payload for water ice prospecting at various depths and locations within PSRs. A key source of error for lunar water prospecting instruments, including Light WAVE, is the loss of water in an icy regolith sample to the lunar vacuum via sublimation due to heating above its ice-stable temperature. This abstract and conference presentation discuss a sublimation model for Light WAVE’s sample crucible using COMSOL Multiphysics to assess the sublimation losses that would occur between sample collection from an external drill and sealing the sample within Light WAVE’s boiler.

Lunar Polar Water↗
NASA NTRS2023

Application of Thermal Loads to a Numerical Model

A detailed aerothermal model requires the application of the heat flux profile over all exposed aerodynamic surfaces. These loads are created using both engineering methods (e.g., FORTRAN codes implementing correlations) and CFD simulations (e.g., solutions to Navier-Stokes equations). The goal is to define the spatial and temporal dependency of the heat flux upon the model.

cfd↗
NASA NTRS1981

Preliminary regime diagram on a sphere with a simplified general circulation model

Numerical model studies useful design considerations and which can be accumulated to form the body of basic knowledge necessary for application of the atmospheric general circulation experiment (AGCE) data to understanding of atmospheric problems are reported. The most efficient way to obtain a computer model suitable for this objective is to modify an existing general circulation model (GCM) of the atmosphere rather than to develop such a model from first principles. The GCM and its modification is outlined.

Pitcher, E. J.↗
NASA NTRS2001

Cloud Modeling

Numerical cloud models have been developed and applied extensively to study cloud-scale and mesoscale processes during the past four decades. The distinctive aspect of these cloud models is their ability to treat explicitly (or resolve) cloud-scale dynamics. This requires the cloud models to be formulated from the non-hydrostatic equations of motion that explicitly include the vertical acceleration terms since the vertical and horizontal scales of convection are similar. Such models are also necessary in order to allow gravity waves, such as those triggered by clouds, to be resolved explicitly. In contrast, the hydrostatic approximation, usually applied in global or regional models, does allow the presence of gravity waves. In addition, the availability of exponentially increasing computer capabilities has resulted in time integrations increasing from hours to days, domain grids boxes (points) increasing from less than 2000 to more than 2,500,000 grid points with 500 to 1000 m resolution, and 3-D models becoming increasingly prevalent. The cloud resolving model is now at a stage where it can provide reasonably accurate statistical information of the sub-grid, cloud-resolving processes poorly parameterized in climate models and numerical prediction models.

Tao, Wei-Kuo↗
NASA NTRS1991

One-way nesting for a primitive equation ocean model

Prognostic numerical models for atmospheric and oceanic circulations require initial fields, boundary conditions, and forcing functions in addition to a consistent set of partial differential equations, including a state relation and equations expressing conservation of mass, momentum, and energy. Depending on the horizontal domain to be modeled, the horizontal boundary conditions are either physically obvious or extremely difficult to specify consistently. If the entire atmosphere is modeled, periodic horizontal boundary conditions are appropriate. On the other hand, the physical horizontal boundaries on the entire ocean are solid walls. Obviously, the normal velocity at a solid wall is zero while the specification of the tangential velocity depends on the mathematical treatment of the horizontal viscous terms. Limitations imposed by computer capacity and cost, as well as research interests, have led to the use of limited area models to study flows in the atmosphere and ocean. The limited area models do not have physical horizontal boundaries, merely numerical ones. Correctly determining these open boundary conditions for limited-area numerical models has both intrigued and frustrated numerical modelers for decades. One common approach is to use the closed or solid wall boundary conditions for a limited-area model. The argument given for this approach is that the boundary conditions affect flow near the walls but that none of these effects are propagated into the interior. Therefore, one chooses a big enough domain that the central region of interest is not corrupted by the boundary flow. Research in progress to model the North Atlantic circulation vividly illustrates the pitfalls of this approach. Two model runs are compared: (1) the southern boundary at 20S between latitudes 0 and 40W is artificially closed; and (2) the same boundary is specified as open with an inward transport of 15 Sv (determined from a global model with the same physics) uniformly spread across the boundary. A comparison of both runs is presented.

Blake, D. W.↗
NASA NTRS1990

Numerical experiments in geomagnetic modeling

Numerical tests were made, using least squares fitting of a spherical harmonic model, to a selection of Magsat data to determine the practical limits of this technique with modern computers. The resulting (M102189) model, whose coefficients were adjusted up to n = 50, was compared with M07AV6, a previous model which used least squares (on vector data) for coefficients up to n = 29, and Gauss-Legendre quadrature (on Z residuals) to adjust the coefficients up to n = 63. For the new least squares adjustment to n = 50 a condition number of 115 was obtained for the solution matrix, with a resulting precision of 11 significant figures. The M102189 model shows a lower and more Gaussian residual distribution than did M07AV6, though the Gaussian envelope fits to the residual distributions, even for the scalar field, gives "standard deviations' never lower than 6 nT, a factor of three higher than the estimated Magsat observational errors. Ionospheric currents are noted to have a significant effect on the coefficients of the internal potential functions.

Cain, Joseph C.↗
NASA NTRS1993

Atmospheric moisture fields derived by satellite observations over the tropical Pacific Ocean

Values of precipitable water are retrieved over the tropical and subtropical Pacific Ocean from TOVS infrared and microwave channel brightness temperature and OLR observations by means of stepwise linear regression. The most useful temperature and moisture sensing channels are pre-selected from sensitivity tests of a radiative transfer model. Numerous models are developed and tested against collocated radiosonde observations and Nimbus-7 SMMR precipitable water estimates. For RAOB comparisons, the best estimator used 15 TOVS predictors and captured 71.1 deg percent of the variance (+0.62 g/sq cm standard error) for column precipitable water; for precipitable water of 700-500 mb bulk layer, these values were 71.7 percent and +/- 0.17 g/sq cm. Little skill of estimated precipitable water was obtained for moisture above 500 mb. Regressions were less skillful against SMMR, unless collocation parameters were tightly controlled; SMMR was less acceptable than RAOB's because of observational drift and errors. Generally, the most skillful predictors were boundary layer brightness temperatures of TOVS channels and satellite estimated stability indices. 'Moisture channels' were hardly useful except for estimating middle and upper tropospheric moisture. Additional regression models were constructed testing the sensitivity to different observational and meteorological characteristics. Models which used some in situ observations surface observations or stabilities calculated from RAOB, were the most successful. The best of these explained 87.5 percent of the variance but the regression selected almost no TOVS channels, relying instead on conventional RAOB and surface observations. A set of four regression models were developed, stratifying atmospheric characteristics on the basis of collocated OLR values. These models improved the variance explained by 5.0 percent; the model associated with the highest OLR values (275 W/sq m less than or equal to OLR; that is, no cloud) showed only marginal skill. Precipitable water fields were generated from the best TOVS-only model for seven days in January 1983 and compared with SMMR-estimated fields. OLR fields and ECMWF precipitable water analysis. The TOVS regression model compared favorably to the SMMR analysis in amplitudes and features. It revealed more evolving synoptic signal than the ECMWF analysis. In synoptically active regions, it differed with respect to the OLR analysis, primarily because of actual differences in the vertical distribution of water vapor.

Chung, Hyosang↗
NASA NTRS1994

A combined Eulerian-volume of fraction-Lagrangian method for atomization simulation

The tracking of free surfaces between liquid and gas phases and analysis of the interfacial phenomena between the two during the atomization and breakup process of a liquid fuel jet is modeled. Numerical modeling of liquid-jet atomization requires the resolution of different conservation equations. Detailed formulation and validation are presented for the confined dam broken problem, the water surface problem, the single droplet problem, a jet breakup problem, and the liquid column instability problem.

Seung, S. P.↗
NASA NTRS1993

Improved Finite Element Modeling of the Turbofan Engine Inlet Radiation Problem

Improvements have been made in the finite element model of the acoustic radiated field from a turbofan engine inlet in the presence of a mean flow. The problem of acoustic radiation from a turbofan engine inlet is difficult to model numerically because of the large domain and high frequencies involved. A numerical model with conventional finite elements in the near field and wave envelope elements in the far field has been constructed. By employing an irrotational mean flow assumption, both the mean flow and the acoustic perturbation problem have been posed in an axisymmetric formulation in terms of the velocity potential; thereby minimizing computer storage and time requirements. The finite element mesh has been altered in search of an improved solution. The mean flow problem has been reformulated with new boundary conditions to make it theoretically rigorous. The sound source at the fan face has been modeled as a combination of positive and negative propagating duct eigenfunctions. Therefore, a finite element duct eigenvalue problem has been solved on the fan face and the resulting modal matrix has been used to implement a source boundary condition on the fan face in the acoustic radiation problem. In the post processing of the solution, the acoustic pressure has been evaluated at Gauss points inside the elements and the nodal pressure values have been interpolated from them. This has significantly improved the results. The effect of the geometric position of the transition circle between conventional finite elements and wave envelope elements has been studied and it has been found that the transition can be made nearer to the inlet than previously assumed.

Roy, Indranil Danda↗
NASA NTRSDate not supplied

Numerical Analysis of Cavitation-Induced Two-Phase Fluid Transients in Cryogenic Feedlines Using Finite Volume Procedure

This article presents a numerical investigation of the cavitation induced fluid transient in cryogenic feedline due to sudden closure of the valve A one dimensional numerical model based on finite volume procedure consisting of nodes and branches using Generalized Fluid System Simulation Program ( has been employed for the prediction of pressure variations The unsteady friction formulation accurately determines wall shear stress, and a homogeneous mixture model is used for two phase flow modeling Numerical results obtained with the present formulation are compared with experimental results and Method of Characteristic ( based results It is observed that low residual in flow variable calculation improves the solution providing numerically stable results GFSSP is able to reproduce the fluid transient peak due to vapor collapse Subsequently, it can retain the shape of pressure wave for two phase fluid transients, but it is dampening faster compared to experiments Further investigation is required with set of experiments to validate the present numerical approach for different experimental data.

Fluid Transient↗
NASA NTRS1982

Compressibility effects in turbulence modeling

Numerical turbulence modeling is discussed with attention given to fluid property variations caused by compressibility in an adiabatic flow. The models are considered in terms of integral quantities expressed by ordinary differential equations and by those formulated as partial differential equations. Compressibility corrections for both integral and partial differential methods are reviewed. Eddy-viscosity models are explored for their capability to characterize the mass-weighted Reynolds stress, which can be accounted for with primitive and/or mass-weighted variables. Compressible flow simulations are currently constrained to low Re and zero mean dilation. The effects of compressibility are defined in wave number space by resolving the Fourier transforms of the velocity vectors into components which are perpendicular and parallel to the wave number vector. Statistical correlations then permit obtaining a value for each contribution.

Rubesin, M. W.↗
NASA NTRS1977

Accretion of rotating fluids by barytropes - Numerical results for white-dwarf models

Numerical sequences of rotating axisymmetric nonmagnetic equilibrium models are constructed which represent the evolution of a barytropic star as it accretes material from a rotating medium. Two accretion geometries are considered - one approximating accretion from a rotating cloud and the other, accretion from a Keplerian disk. It is assumed that some process, such as Ekman spin-up or nonequilibrium oscillations, maintains nearly constant angular velocity along cylinders about the rotation axis. Transport of angular momentum in the cylindrically radial direction by viscosity is included. Fluid instabilities and other physical processes leading to enhancement of this transport are discussed. Particular application is made to zero-temperature white-dwarf models, using the degenerate electron equation of state. An initially nonrotating 0.566-solar-mass white dwarf is followed during the accretion of more than one solar mass of material. Applications to degenerate stellar cores, to mass-transfer binary systems containing white dwarfs, such as novae and dwarf novae, to Type I supernovae, and to galactic X-ray sources are considered.

Durisen, R. H.↗