Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “monotonicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Hidden carbon dioxide on Mars

A recent proposal that much of the outgassed CO2 on Mars is tied up in the planet's crust in the form of carbonate mineral is discussed. According to this hypothesis, carbonate formation on Mars continued after open bodies of liquid water became unstable. A consequence of the hypothesis is that, in the absence of a recycling mechanism for CO2, the surface pressure on Mars will monotonically decrease until it reaches the minimum atmospheric overburden pressure required for liquid water to form. The theory explains Mars' low surface pressure, and also implies that the climate of Mars has evolved linearly over geologic time, rather than cyclically.

Haberle, R. M.↗
NASA NTRS1985

Review of recent laboratory double layer experiments

Recent laboratory measurements of double layers are reviewed. Most experiments that are considered employed triple plasma devices or Q-machines. It is shown that a variety of both one and three dimensional phenomena have been achieved. Stationary one and three dimensional structures consist of monotonic double layers, very weak, weak, strong and very strong double layers with potential steps e(phi)/T(e) equal to about 1, less than, greater than, and much greater than 10, respectively. Multiple double layers consist of structures with large potential dips on the low potential side and stairstep double layers. Two and three dimensional structures include multiple double layers, which resemble U shaped double layers, and ionization produced strong double layers. Moving double layers include ion acoustic double layers and double layers which are the result of drifting species and mismatches at plasma boundaries. It appears that double layers can be BGK solutions or related to turbulence. Double layer creation can occur in a variety of different ways. Ionization can sometimes be important and sometimes play no role at all.

Hershkowitz, N.↗
NASA NTRS1986

Measurement and application of fault latency

The time interval between the occurrence of a fault and the detection of the error caused by the fault is divided by the generation of that error into two parts: fault latency and error latency. Since the moment of error generation is not directly observable, all related works in the literature have dealt with only the sum of fault and error latencies, thereby making the analysis of their separate effects impossible. To remedy this deficiency, (1) a new methodology for indirectly measuring fault latency is presented; the distribution of fault latency is derived from the methodology; and (3) the knowledge of fault latency is applied to the analysis of two important examples. The proposed methodology has been implemented for measuring fault latency in the Fault-Tolerant Multiprocessor (FTMP) at the NASA Airlab. The experimental results show wide variations in the mean fault latencies of different function circuits within FTMP. Also, the measured distributions of fault latency are shown to have monotone hazard rates. Consequently, Gamma and Weibull distributions are selected for the least-squares fit as the distribution of fault latency.

Shin, K. G.↗
NASA NTRS1986

Viscoplasticity based on overstress with a differential growth law for the equilibrium stress

Two coupled, nonlinear differential equations are proposed for the modeling of the elastic and rate (time) dependent inelastic behavior of structural metals in the absence of recovery and aging. The structure of the model is close to the unified theories but contains essential differences. It is shown that the model reproduces almost elastic regions upon initial loading and in the unloading regions of the hysteresis loop. Under loading, unloading and reloading in strain control the model simulated the experimentally observed sharp transition from nearly elastic to inelastic behavior. When a formulation akin to existing unified theories is adopted the almost elastic regions reduce the points and the transition upon reloading is very gradual. For different formulations the behavior under sudden in(de)creases of the strain rate by two orders of magnitude is simulated by numerical experiments and differences are noted. The model represents cyclically neutral behavior and contains three constants and two positive, decreasing functions. The determination of constants and functions from monotonic loading with strain rate changes and relaxation periods is described.

Krempl, E.↗
NASA NTRS1985

HCl vibrational fundamental band - Line intensities and temperature dependence of self-broadening coefficients

Self-broadening in the vibrational fundamental of HCl is inversely proportional to the temperature for transitions which lie near the Boltzmann rotational maximum and becomes monotonically less temperature-dependent as the rotational quantum number increases. The rotationless transition moment was found to have the value of 5.57 + or - 0.13 x 10 to the -3rd (Debye)-squared and the first Herman-Wallis factor, C = -2.543 + or - 0.019 x 10 to the -2nd.

Chackerian, C., Jr.↗
NASA NTRS1985

Texture classification by local rank correlation

A new approach to texture classification based on local rank correlation is proposed here. Its performance is compared with Laws' method which uses local convolution with feature masks. In the experiments, texture samples are classified based on their distribution of local statistics, either rank correlations or convolutions. The new method achieves generally optimal classification rates. It appears to be more robust because local order statistics are unaffected by local sample differences due to monotonic shifts of texture gray values and are less sensitive to noise.

Harwood, D.↗
NASA NTRS1985

Relations between ergodicity and observability

Aspects of global observability (GO) for some standard examples of chaotic systems are considered, the underlying philosophy being that such systems should be easy to observe and should be observed by large classes of scalar functions. Consideration is given to GO for piecewise monotone maps of the interval (a standard example of a chaotic system). Attention is then given to GO for ergodic translations on compact (metrizable) topological groups; the most familiar examples are the irrational translation flows on the n-torus.

Drager, L.↗
NASA NTRS1986

The cyclic stress-strain behavior of a nickel-base superalloy at 650 C

It is pointed out that examinations of the monotonic tensile and fatigue behaviors of single crystal nickel-base superalloys have disclosed orientation-dependent tension-compression anisotropies and significant differences in the mechanical response of octahedral and cube slip at intermediate temperatures. An examination is conducted of the cyclic hardening response of the single crystal superalloy PWA 1480 at 650 C. In the considered case, tension-compression anisotropy is present, taking into account primarily conditions under which a single slip system is operative. Aspects of a deformation by single slip are considered along with cyclic hardening anisotropy in tension and compression. It is found that specimens deforming by octahedral slip on a single slip system have similar hardening responses in tensile and low cycle fatigue loading. Cyclic strain hardening is very low for specimens displaying single slip.

Gabb, T. P.↗
NASA NTRS1986

Optimization and acceleration guidance of flight trajectories in a windshear

Guidance strategies for near-optimum performance in a wind shear are examined. The takeoff problem is considered with reference to flight in a vertical plane; the presence of a downdraft is assumed. Trajectories for optimum performance in a wind shear are determined for different wind shear models and intensities. Numerical experiments with the optimum control approach lead to the conclusion that, for weak to moderate shear/downdraft combinations, the optimal trajectory is characterized by a monotonic climb, and for severe shear/downdraft combinations, it is characterized by an initial climb, followed by a nearly horizontal flight, followed by renewed climbing after the aircraft has passed through the shear region. An acceleration guidance scheme based on relative acceleration is presented in both analytical form and feedback control form. Numerical results with this scheme result in trajectories close to the optimum and considerably superior to those arising from alternative guidance schemes.

Miele, A.↗
NASA NTRS1986

The Tukey algorithm for enhancing MST radar data

One of the most troublesome features in MSR (mesosphere stratosphere troposphere) velocity measurements is the determination of unwanted scatterer whose velocity is different from that of the surrounding atmosphere. Aircraft seen in the sidelobes of the antenna are the principal problem. Because coherent integration essentially eliminates echoes with line of sight velocities greater than 10 or 20 m/s, aircraft are seen only when their flight path is almost perpendicular to the line of sight. Then, they give large returns whose velocities may be positive or negative, and certainly different from that of the surrounding air. The glitches in the minute by minute velocity records are quite troublesome in that they may distort the statistics of the velocity. An objective way is therefore needed to remove sporadic points of this kind. For this purpose, the Tukey algorithm is appropriate and has some advantages over averaging. The Tukey algorithm, applied to a data array, uses for each data point the median of it and the two points surrounding it. If the three points form a monotonically increasing or decreasing sequence, the original point is copied with change. However, if the central point is remote from the other two, it is replaced by whichever of the two surrounding points is closest in value. The greatest effect of the Tukey algorithm is on data where the successive points are uncorrelated. Examples are given.

Bowhill, S. A.↗
NASA NTRS1986

The effects of space radiation on a chemically modified graphite-epoxy composite material

The effects of the space environment on the engineering properties and chemistry of a chemically modified T300/934 graphite-epoxy composite system are characterized. The material was subjected to 1.0 x 10 to the 10th power rads of 1.0 MeV electron irradiation under vacuum to simulate 30 years in geosynchronous earth orbit. Monotonic tension tests were performed at room temperature (75 F/24 C) and elevated temperature (250 F/121 C) on 4-ply unidirectional laminates. From these tests, inplane engineering and strength properties (E sub 1, E sub 2, Nu sub 12, G sub 12, X sub T, Y sub T) were determined. Cyclic tests were also performed to characterize energy dissipation changes due to irradiation and elevated temperature. Large diameter graphite fibers were tested to determine the effects of radiation on their stiffness and strength. No significant changes were observed. Dynamic-mechanical analysis demonstrated that the glass transition temperature was reduced by 50 F(28 C) after irradiation. Thermomechanical analysis showed the occurrence of volatile products generated upon heating of the irradiated material. The chemical modification of the epoxy did not aid in producing a material which was more radiation resistant than the standard T300/934 graphite-epoxy system. Irradiation was found to cause crosslinking and chain scission in the polymer. The latter produced low molecular weight products which plasticize the material at elevated temperatures and cause apparent material stiffening at low stresses at room temperature.

Reed, S. M.↗
NASA NTRS1984

Constitutive modeling for isotropic materials

The unified constitutive theories for application to typical isotropic cast nickel base supperalloys used for air-cooled turbine blades were evaluated. The specific modeling aspects evaluated were: uniaxial, monotonic, cyclic, creep, relaxation, multiaxial, notch, and thermomechanical behavior. Further development of the constitutive theories to model thermal history effects, refinement of the material test procedures, evaluation of coating effects, and verification of the models in an alternate material will be accomplished in a follow-on for this base program.

Ramaswamy, V. G.↗
NASA NTRS1986

The cyclic stress-strain behavior of PWA 1480 at 650 deg C

The monotonic plastic flow behavior of several single crystal nickel-base, superalloys has been shown to vary significantly with crystallographic orientation. In the present study, the cyclic plastic flow response of one such alloy, PWA 1480, was examined at 650 deg C in air. Single crystal specimens aligned near several crystallographic directions were tested in fully reversed, total-strain-controlled low cycle fatigue tests at a frequency of 0.1 Hz. The cyclic stress-strain response and general cyclic hardening behavior was analyzed as a function of crystallographic orientation and inelastic strain range.

Gabb, T. P.↗
NASA NTRS1985

Creep fatigue life prediction for engine hot section materials (isotropic)

The first two years of a two-phase program aimed at improving the high temperature crack initiation life prediction technology for gas turbine hot section components are discussed. In Phase 1 (baseline) effort, low cycle fatigue (LCF) models, using a data base generated for a cast nickel base gas turbine hot section alloy (B1900+Hf), were evaluated for their ability to predict the crack initiation life for relevant creep-fatigue loading conditions and to define data required for determination of model constants. The variables included strain range and rate, mean strain, strain hold times and temperature. None of the models predicted all of the life trends within reasonable data requirements. A Cycle Damage Accumulation (CDA) was therefore developed which follows an exhaustion of material ductility approach. Material ductility is estimated based on observed similarities of deformation structure between fatigue, tensile and creep tests. The cycle damage function is based on total strain range, maximum stress and stress amplitude and includes both time independent and time dependent components. The CDA model accurately predicts all of the trends in creep-fatigue life with loading conditions. In addition, all of the CDA model constants are determinable from rapid cycle, fully reversed fatigue tests and monotonic tensile and/or creep data.

Moreno, Vito↗
NASA NTRS1986

Large-scale electric fields resulting from magnetic reconnection in the corona

The method of Forbes and Priest (2-D model) is applied to the large two-ribbon flare of July 29, 1973, for which both detailed H observations and magnetic data are available. For this flare the ribbons were long, nearly straight, and parallel to each other, and the 2-D model for the coronal field geometry may be adequate. The temporal profile E(t) is calculated and indicates that reconnection sets in at the beginning of the decay phase. From this time the electric field grows rapidly to a maximum value of about 2 V/cm within just a few minutes. Thereafter it decreases monotonically with time.

Kopp, R. A.↗
NASA NTRS1986

The quasi-linear relaxation of thick-target electron beams in solar flares

The effects of quasi-linear interactions on thick-target electron beams in the solar corona are investigated. Coulomb collisions produce regions of positive gradient in electron distributions which are initially monotonic decreasing functions of energy. In the resulting two-stream instability, energy and momentum are transferred from electrons to Langmuir waves and the region of positive slope in the electron distribution is replaced by a plateau. In the corona, the timescale for this quasi-linear relaxation is very short compared to the collision time. It is therefore possible to model the effects of quasi-linear relaxation by replacing any region of positive slop in the distribution by a plateau at each time step, in such a way as to conserve particle number. The X-ray bremsstrahlung and collisional heating rate produced by a relaxed beam are evaluated. Although the analysis is strictly steady state, it is relevant to the theoretical interpretation of hard X-ray bursts with durations of the order of a few seconds (i.e., the majority of such bursts).

Mcclements, K. G.↗
NASA NTRS1987

A generalized procedure for constructing an upwind based TVD scheme

A generalized formulation for constructing second- and higher-order accurate TVD (total variation diminishing) schemes is presented. A given scheme is made TVD by limiting antidiffusive flux differences with some linear functions, so-called limiters. The general idea of the formulation and its mathematical proof of Harten's TVD conditions is shown by applying the Lax-Wendroff method to scalar nonlinear equations and a constant-coefficient system of conservation laws. For the system of equations, several definitions are derived for the argument used in the limiter function and present their performance in numerical experiments. The formulation is extended to the nonlinear system. It is demonstrated that the present procedure can easily convert existing central or upwind, and second- or higher-order differencing schemes to preserve monotonicity and yield physically admissible solutions. The formulation is simple mathematically as well as numerically; both matrix-vector multiplication and Riemann solver are avoided. Although the notion of TVD is based on the initial value problem, application to the steady Euler equations of the formulation is also made.

Liou, Meng-Sing↗
NASA NTRS1987

Cloud fluid models of gas dynamics and star formation in galaxies

The large dynamic range of star formation in galaxies, and the apparently complex environmental influences involved in triggering or suppressing star formation, challenges the understanding. The key to this understanding may be the detailed study of simple physical models for the dominant nonlinear interactions in interstellar cloud systems. One such model is described, a generalized Oort model cloud fluid, and two simple applications of it are explored. The first of these is the relaxation of an isolated volume of cloud fluid following a disturbance. Though very idealized, this closed box study suggests a physical mechanism for starbursts, which is based on the approximate commensurability of massive cloud lifetimes and cloud collisional growth times. The second application is to the modeling of colliding ring galaxies. In this case, the driving processes operating on a dynamical timescale interact with the local cloud processes operating on the above timescale. The results is a variety of interesting nonequilibrium behaviors, including spatial variations of star formation that do not depend monotonically on gas density.

Struck-Marcell, Curtis↗