Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Atmospheric Turbulence Modeling for Aero Vehicles: Fractional Order Fits

Atmospheric turbulence models are necessary for the design of both inlet/engine and flight controls, as well as for studying coupling between the propulsion and the vehicle structural dynamics for supersonic vehicles. Models based on the Kolmogorov spectrum have been previously utilized to model atmospheric turbulence. In this paper, a more accurate model is developed in its representative fractional order form, typical of atmospheric disturbances. This is accomplished by first scaling the Kolmogorov spectral to convert them into finite energy von Karman forms and then by deriving an explicit fractional circuit-filter type analog for this model. This circuit model is utilized to develop a generalized formulation in frequency domain to approximate the fractional order with the products of first order transfer functions, which enables accurate time domain simulations. The objective of this work is as follows. Given the parameters describing the conditions of atmospheric disturbances, and utilizing the derived formulations, directly compute the transfer function poles and zeros describing these disturbances for acoustic velocity, temperature, pressure, and density. Time domain simulations of representative atmospheric turbulence can then be developed by utilizing these computed transfer functions together with the disturbance frequencies of interest.

Atmospheric Turbulence Modeling↗
NASA NTRS2002

The conical fit approach to modeling ionospheric total electron content

The Global Positioning System (GPS) can be used to measure the integrated electron density along raypaths between satellites and receivers. Such measurements may, in turn, be used to construct regional and global maps of the ionospheric total electron content (TEC). Maps are generated by fitting measurements to an assumed ionospheric model.

ionosphere WAAS GPS TEC↗
NASA NTRS1989

Aeroelastic modeling for the FIT (Functional Integration Technology) team F/A-18 simulation

As part of Langley Research Center's commitment to developing multidisciplinary integration methods to improve aerospace systems, the Functional Integration Technology (FIT) team was established to perform dynamics integration research using an existing aircraft configuration, the F/A-18. An essential part of this effort has been the development of a comprehensive simulation modeling capability that includes structural, control, and propulsion dynamics as well as steady and unsteady aerodynamics. The structural and unsteady aerodynamics contributions come from an aeroelastic mode. Some details of the aeroelastic modeling done for the Functional Integration Technology (FIT) team research are presented. Particular attention is given to work done in the area of correction factors to unsteady aerodynamics data.

Zeiler, Thomas A.↗
NASA NTRS2015

Atmospheric Turbulence Modeling for Aerospace Vehicles: Fractional Order Fit

An improved model for simulating atmospheric disturbances is disclosed. A scale Kolmogorov spectral may be scaled to convert the Kolmogorov spectral into a finite energy von Karman spectral and a fractional order pole-zero transfer function (TF) may be derived from the von Karman spectral. Fractional order atmospheric turbulence may be approximated with an integer order pole-zero TF fit, and the approximation may be stored in memory.

Kopasakis, George↗
NASA NTRS2010

Atmospheric Turbulence Modeling for Aero Vehicles: Fractional Order Fits

Atmospheric turbulence models are necessary for the design of both inlet/engine and flight controls, as well as for studying coupling between the propulsion and the vehicle structural dynamics for supersonic vehicles. Models based on the Kolmogorov spectrum have been previously utilized to model atmospheric turbulence. In this paper, a more accurate model is developed in its representative fractional order form, typical of atmospheric disturbances. This is accomplished by first scaling the Kolmogorov spectral to convert them into finite energy von Karman forms and then by deriving an explicit fractional circuit-filter type analog for this model. This circuit model is utilized to develop a generalized formulation in frequency domain to approximate the fractional order with the products of first order transfer functions, which enables accurate time domain simulations. The objective of this work is as follows. Given the parameters describing the conditions of atmospheric disturbances, and utilizing the derived formulations, directly compute the transfer function poles and zeros describing these disturbances for acoustic velocity, temperature, pressure, and density. Time domain simulations of representative atmospheric turbulence can then be developed by utilizing these computed transfer functions together with the disturbance frequencies of interest.

Kopasakis, George↗
NASA NTRS2013

10 Yr Spatial and Temporal Trends of PM2.5 Concentrations in the Southeastern US Estimated Using High-resolution Satellite Data

Long-term PM2.5 exposure has been reported to be associated with various adverse health outcomes. However, most ground monitors are located in urban areas, leading to a potentially biased representation of the true regional PM2.5 levels. To facilitate epidemiological studies, accurate estimates of spatiotemporally continuous distribution of PM2.5 concentrations are essential. Satellite-retrieved aerosol optical depth (AOD) has been widely used for PM2.5 concentration estimation due to its comprehensive spatial coverage. Nevertheless, an inherent disadvantage of current AOD products is their coarse spatial resolutions. For instance, the spatial resolutions of the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Multiangle Imaging SpectroRadiometer (MISR) are 10 km and 17.6 km, respectively. In this paper, a new AOD product with 1 km spatial resolution retrieved by the multi-angle implementation of atmospheric correction (MAIAC) algorithm was used. A two-stage model was developed to account for both spatial and temporal variability in the PM2.5-AOD relationship by incorporating the MAIAC AOD, meteorological fields, and land use variables as predictors. Our study area is in the southeastern US, centered at the Atlanta Metro area, and data from 2001 to 2010 were collected from various sources. The model was fitted for each year individually, and we obtained model fitting R2 ranging from 0.71 to 0.85, MPE from 1.73 to 2.50 g m3, and RMSPE from 2.75 to 4.10 g m3. In addition, we found cross validation R2 ranging from 0.62 to 0.78, MPE from 2.00 to 3.01 g m3, and RMSPE from 3.12 to 5.00 g m3, indicating a good agreement between the estimated and observed values. Spatial trends show that high PM2.5 levels occurred in urban areas and along major highways, while low concentrations appeared in rural or mountainous areas. A time series analysis was conducted to examine temporal trends of PM2.5 concentrations in the study area from 2001 to 2010. The results showed that the PM2.5 levels in the study area followed a generally declining trend from 2001 to 2010 and decreased about 20 during the period. However, there was an exception of an increase in year 2005, which is attributed to elevated sulfate concentrations in the study area in warm months of 2005. An investigation of the impact of wild and prescribed fires on PM2.5 levels in 2007 suggests a positive relationship between them.

particulate matter (PM2.5)↗
NASA NTRS2017

Effects of Inventory Bias on Landslide Susceptibility Calculations

Many landslide inventories are known to be biased, especially inventories for large regions such as Oregon's SLIDO or NASA's Global Landslide Catalog. These biases must affect the results of empirically derived susceptibility models to some degree. We evaluated the strength of the susceptibility model distortion from postulated biases by truncating an unbiased inventory. We generated a synthetic inventory from an existing landslide susceptibility map of Oregon, then removed landslides from this inventory to simulate the effects of reporting biases likely to affect inventories in this region, namely population and infrastructure effects. Logistic regression models were fitted to the modified inventories. Then the process of biasing a susceptibility model was repeated with SLIDO data. We evaluated each susceptibility model with qualitative and quantitative methods. Results suggest that the effects of landslide inventory bias on empirical models should not be ignored, even if those models are, in some cases, useful. We suggest fitting models in well-documented areas and extrapolating across the study region as a possible approach to modeling landslide susceptibility with heavily biased inventories.

Oregon↗
NASA NTRS2017

Effects of Inventory Bias on Landslide Susceptibility Calculations

Many landslide inventories are known to be biased, especially inventories for large regions such as Oregons SLIDO or NASAs Global Landslide Catalog. These biases must affect the results of empirically derived susceptibility models to some degree. We evaluated the strength of the susceptibility model distortion from postulated biases by truncating an unbiased inventory. We generated a synthetic inventory from an existing landslide susceptibility map of Oregon, then removed landslides from this inventory to simulate the effects of reporting biases likely to affect inventories in this region, namely population and infrastructure effects. Logistic regression models were fitted to the modified inventories. Then the process of biasing a susceptibility model was repeated with SLIDO data. We evaluated each susceptibility model with qualitative and quantitative methods. Results suggest that the effects of landslide inventory bias on empirical models should not be ignored, even if those models are, in some cases, useful. We suggest fitting models in well-documented areas and extrapolating across the study region as a possible approach to modelling landslide susceptibility with heavily biased inventories.

landslide↗
NASA NTRS1997

Fitting a 3-D analytic model of the coronal mass ejection to observations

The application of an analytic magnetohydrodynamic model is presented to observations of the time-dependent explusion of 3D coronal mass ejections (CMEs) out of the solar corona. This model relates the white-light appearance of the CME to its internal magnetic field, which takes the form of a closed bubble, filled with a partly anchored, twisted magnetic flux rope and embedded in an otherwise open background field. The density distribution frozen into the expanding CME expanding field is fully 3D, and can be integrated along the line of sight to reproduce observations of scattered white light. The model is able to reproduce the three conspicuous features often associated with CMEs as observed with white-light coronagraphs: a surrounding high-density region, an internal low-density cavity, and a high-density core. The model also describes the self-similar radial expansion of these structures. By varying the model parameters, the model can be fitted directly to observations of CMEs. It is shown how the model can quantitatively match the polarized brightness contrast of a dark cavity emerging through the lower corona as observed by the HAO Mauna Loa K-coronameter to within the noise level of the data.

Gibson, S. E.↗
NASA NTRS1994

Soft X-ray spectral fits of Geminga with model neutron star atmospheres

The spectrum of the soft X-ray pulsar Geminga consists of two components, a softer one which can be interpreted as thermal-like radiation from the surface of the neutron star, and a harder one interpreted as radiation from a polar cap heated by relativistic particles. We have fitted the soft spectrum using a detailed magnetized hydrogen atmosphere model. The fitting parameters are the hydrogen column density, the effective temperature T(sub eff), the gravitational redshift z, and the distance to radius ratio, for different values of the magnetic field B. The best fits for this model are obtained when B less than or approximately 1 x 10(exp 12) G and z lies on the upper boundary of the explored range (z = 0.45). The values of T(sub eff) approximately = (2-3) x 10(exp 5) K are a factor of 2-3 times lower than the value of T(sub eff) obtained for blackbody fits with the same z. The lower T(sub eff) increases the compatibility with some proposed schemes for fast neutrino cooling of neutron stars (NSs) by the direct Urca process or by exotic matter, but conventional cooling cannot be excluded. The hydrogen atmosphere fits also imply a smaller distance to Geminga than that inferred from a blackbody fit. An accurate evaluation of the distance would require a better knowledge of the ROSAT Position Sensitive Proportional Counter (PSPC) response to the low-energy region of the incident spectrum. Our modeling of the soft component with a cooler magnetized atmosphere also implies that the hard-component fit requires a characteristic temperature which is higher (by a factor of approximately 2-3) and a surface area which is smaller (by a factor of 10(exp 3), compared to previous blackbody fits.

Meyer, R. D.↗
NASA NTRS1991

Spectral fitting, shock layer modeling, and production of nitrogen oxides and excited nitrogen

An analysis was made of N2 emission from 8.72 MJ/kg shock layer at 2.54, 1.91, and 1.27 cm positions and vibrational state distributions, temperatures, and relative electronic state populations was obtained from data sets. Other recorded arc jet N2 and air spectral data were reviewed and NO emission characteristics were studied. A review of operational procedures of the DSMC code was made. Information on other appropriate codes and modifications, including ionization, were made as well as a determination of the applicability of codes reviewed to task requirement. A review was also made of computational procedures used in CFD codes of Li and other codes on JSC computers. An analysis was made of problems associated with integration of specific chemical kinetics applicable to task into CFD codes.

Blackwell, H. E.↗
NASA NTRS2003

Eruption of a Multiple-Turn Helical Magnetic Flux Tube in a Large Flare: Evidence for External and Internal Reconnection that Fits the Breakout Model of Solar Magnetic Eruptions

We present observations and an interpretation of a unique multiple-turn spiral flux tube eruption from AR10030 on 2002 July 15. The TRACE CIV observations clearly show a flux tube that is helical and that is erupting from within a sheared magnetic field. These observations are interpreted in the context of the breakout model for magnetic field explosions. The initiation of the helix eruption starts 25 seconds after the peak of the flare s strongest impulsive spike of microwave gryosynchrotron radiation early in the flare s explosive phase, implying that the sheared core field is not the site of the initial reconnection. Within the quadrupolar configuration of the active region, the external and internal reconnection sites are identified in each of two consecutive eruptive flares that produce a double CME. The first external breakout reconnection apparently releases an underlying sheared core field and allows it to erupt, leading to internal reconnection in the wake of the erupting helix. This internal reconnection heats the two-ribbon flare and might or might not produce the helix. These events lead to the first CME and are followed by a second breakout that initiates a second and larger halo CME. The strong magnetic shear in the region is associated with rapid proper motion and evolution of the active region. The multiple-turn helix originates from above a sheared-field magnetic inversion line within a filament channel, and starts to erupt only after fast breakout reconnection has started. These observations are counter to the standard flare model and support the breakout model for eruptive flare initiation. However, the observations are compatible with internal reconnection in a sheared magnetic arcade in the formation and eruption of the helix.

Gary, G. Allen↗
NASA NTRS2004

Eruption of a Multiple-Turn Helical Magnetic Flux Tube in a Large Flare: Evidence for External and Internal Reconnection that Fits the Breakout Model of Solar Magnetic Eruptions

We present observations and an interpretation of a unique multiple-turn spiral flux tube eruption from active region 10030 on 2002 July 15. The TRACE C IV observations clearly show a flux tube that is helical and erupting from within a sheared magnetic field. These observations are interpreted in the context of the breakout model for magnetic field explosions. The initiation of the helix eruption. as determined by a linear backward extrapolation, starts 25 s after the peak of the flare's strongest impulsive spike of microwave gyrosynchrotron radiation early in the flare s explosive phase, implying that the sheared core field is not the site of the initial reconnection. Within the quadrupolar configuration of the active region, the external and internal reconnection sites are identified in each of two consecutive eruptive flares that produce a double coronal mass ejection (CME). The first external breakout reconnection apparently releases an underlying sheared core field and allows it to erupt, leading to internal reconnection in the wake of the erupting helix. This internal reconnection releases the helix and heats the two-ribbon flare. These events lead to the first CME and are followed by a second breakout that initiates a second and larger halo CME. The strong magnetic shear in the region is compatible with the observed rapid proper motion and evolution of the active region. The multiple-turn helix originates from above a sheared-field magnetic inversion line within a filament channel. and starts to erupt only after fast breakout reconnection has started. These observations are counter to the standard flare model and support the breakout model for eruptive flare initiation.

Gary, G. Allen↗
NASA NTRS2011

International Space Station (ISS) Emergency Mask (EM) Development

The Emergency Mask (EM) is considered a secondary response emergency Personal Protective Equipment (PPE) designed to provide respiratory protection to the International Space Station (ISS) crewmembers in response to a post-fire event or ammonia leak. The EM is planned to be delivered to ISS in 2012 to replace the current air purifying respirator (APR) onboard ISS called the Ammonia Respirator (AR). The EM is a one ]size ]fits ]all model designed to fit any size crewmember, unlike the APR on ISS, and uses either two Fire Cartridges (FCs) or two Commercial Off-the-Shelf (COTS) 3M(Trademark). Ammonia Cartridges (ACs) to provide the crew with a minimum of 8 hours of respiratory protection with appropriate cartridge swap ]out. The EM is designed for a single exposure event, for either post ]fire or ammonia, and is a passive device that cannot help crewmembers who cannot breathe on their own. The EM fs primary and only seal is around the wearer fs neck to prevent a crewmember from inhaling contaminants. During the development of the ISS Emergency Mask, several design challenges were faced that focused around manufacturing a leak free mask. The description of those challenges are broadly discussed but focuses on one key design challenge area: bonding EPDM gasket material to Gore(Registered Trademark) fabric hood.

Toon, Katherine P.↗
NASA NTRS2019

Computational Bayesian Methods Applied to Complex Problems in Bio and Astro Statistics

In this dissertation we apply computational Bayesian methods to three distinct problems. In the first chapter, we address the issue of unrealistic covariance matrices used to estimate collision probabilities. We model covariance matrices with a Bayesian Normal-Inverse-Wishart model, which we fit with Gibbs sampling. In the second chapter, we are interested in determining the sample sizes necessary to achieve a particular interval width and establish non-inferiority in the analysis of prevalences using two fallible tests. To this end, we use a third order asymptotic approximation. In the third chapter, we wish to synthesize evidence across multiple domains in measurements taken longitudinally across time, featuring a substantial amount of structurally missing data, and fit the model with Hamiltonian Monte Carlo in a simulation to analyze how estimates of a parameter of interest change across sample sizes.

Elrod, Chris↗
NASA NTRSDate not supplied

Quantifying radiation quality for space relevant radiation types: Fitting excess risk models to three combined HZE-irradiated mouse datasets

Radiation health risks are predominantly derived from low linear energy transfer (LET) terrestrial exposures; however, space radiation includes exposure to high-LET and high-charge, high-energy (HZE) particles. Accurately quantifying the differences in radiation quality between the space and terrestrial radiation environments is important for assessing and predicting health risks for astronauts. Weil et al. 2009 and 2014 used two different inbred mouse strains to study differences in hepatocellular carcinoma (HCC) tumorigenesis after exposures to low- and high- LET radiation. More recently, Edmundson et al. 2020 provided valuable new tumor data in outbred mice that were exposed to low- and high-LET radiation. The present study aims to rigorously investigate a relative biological effectiveness (RBE) factor by leveraging the HCC tumor data from Weil et al. 2009, Weil et al. 2014, and Edmundson et al. 2020. The three experiments were similarly designed, allowing the raw data to be combined into a pooled dataset to estimate excess relative risk (ERR) and excess absolute risk (EAR) models using Bayesian Poisson regression. These effect estimates from the pooled data provide greater power to calculate a data driven RBE. Extensive sensitivity analyses test the robustness of RBE estimates to various model assumptions. The following questions will be explored through the sensitivity analyses: • Is the shape of the dose response different for low-LET radiation and HZE radiation, indicating that RBE is a function of dose? • Does attained age modify the effect estimates differently for low-LET radiation and HZE radiation, indicating RBE is a function of attained age? • Are the effect estimates and RBE estimates different for inbred mouse strains and outbred mouse strains? • Do assumptions about differences in ERR models and EAR models change the estimated RBE? Additional studies would be needed to validate the findings from these exploratory analyses.

Lori J. Chappell↗
NASA NTRSDate not supplied

Quantifying radiation quality for space relevant radiation types: Fitting excess risk models to three combined HZE-irradiated mouse datasets

Radiation health risks are predominantly derived from low linear energy transfer (LET) terrestrial exposures; however, space radiation includes exposure to high-LET and high-charge, high-energy (HZE) particles. Accurately quantifying the differences in radiation quality between the space and terrestrial radiation environments is important for assessing and predicting health risks for astronauts. Weil et al. 2009 and 2014 used two different inbred mouse strains to study differences in hepatocellular carcinoma (HCC) tumorigenesis after exposures to low- and high- LET radiation[1-2]. More recently, Edmondson et al. 2020 provided valuable new tumor data in outbred mice that were exposed to low- and high-LET radiation[3]. The present study aims to rigorously investigate a relative biological effectiveness (RBE) factor by leveraging the HCC tumor data from the three datasets[1-3]. The three experiments were similarly designed, allowing the raw data to be combined into a pooled dataset to estimate excess relative risk (ERR) and excess absolute risk (EAR) models using Bayesian Poisson regression.

Lori J. Chappell↗