Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model compounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Comparing and contrasting In-Vial and full-scale systems for sparging volatile analytes

Here, in-vial sparging was demonstrated as an effective, practical alternative to a full-scale sparging system for supporting the analysis of volatile constituents. Using elemental mercury (Hg 0 ) and toluene as representative purgeable analytes, the mass removal for various sparge configurations was measured and a reduced order model was developed and validated. In the primary experiments, Hg 0 in the sparge gas was trapped on activated carbon or gold, thermally desorbed, and quantified using atomic absorption or atomic fluorescence spectroscopy. Toluene experiments using the same in-vial sparge apparatus and sparge parameters were performed to demonstrate the applicability of the reduced order model to a broad range of compounds. Toluene removal was tracked by measuring the remaining toluene in sparged aliquots using Ultraviolet-visible (UV–Vis) spectroscopy. For the sparging, flow rates varied from 25 to 75 mL/min for periods from 0 to 30 min. Sparge performance, mass removal as a function of time, and sparge gas volume were measured for both in-vial and full-scale systems. A model based on dimensionless Henry's Law coefficient, normalized sparge gas volume, and fractional extent of equilibrium matched the experimental data for both compounds and provides a practical tool for future applications. For the conditions tested in this study, the calibrated model indicated that the sparge gas in the in-vial system reached approximately 33% of its equilibrium value before exiting the water surface, while a full-scale system reached approximately 100%. The tests validated the quality, reproducibility, and predictability of sparging performance for both full scale and in-vial sparge systems. Related factors such as waste generation, worker risk, and labor were also assessed. Full scale sparge systems provide the advantage of lower detection levels due to larger sample volume, while the in-vial sparge systems provide advantages for most other factors; including automatability, reducing secondary wastes, lessening the need to clean and check the sparge apparatus, and lowering labor and costs. The data and associated reduced order model support continued development and deployment of in-vial sparge platforms as a practical option for analysis of purgeable analytes such as volatile organic compounds and volatile metals/organometallics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Stoichiometric Lanthanide Compounds with Diglycolamides: A Synthetic Approach toward Understanding Rare-Earth Speciation in Solution

A fundamental understanding of coordination chemistry across the lanthanide series is essential for explaining the chemical behavior of rare-earth metals in complex liquid–liquid extraction processes. Probing the exact bonding between the extractant and the metal is sometimes done through the synthesis of solid-state compounds that can serve as models for metal speciation in solution. In the case of diglycolamide (DGA), a commonly used neutral diamide extractant, extensive studies identify the stepwise formation of 1:1 [Ln(DGA)(H 2 O) 6 ] 3+ , 1:2 [Ln(DGA) 2 (H 2 O) 3 ] 3+ , and 1:3 [Ln(DGA) 3 ] 3+ complexes in solution. The crystallographic reports, however, exclusively show a 1:3 [Ln(DGA) 3 ] 3+ moiety in the solid state, while the structures of 1:1 and 1:2 complexes are yet to be isolated and comprehensively studied. In this work, we report the synthesis and characterization of three new families of stoichiometric N,N,N′,N’ -tetramethyldiglycolamide (TMDGA) compounds: [Ln(TMDGA)(H 2 O) 5 Cl]Cl 2 ·2H 2 O, [Ln(TMDGA) 2 (H 2 O) 3 ]Cl 3 ·3H 2 O, and [Ln(TMDGA) 3 ]Cl 3 ·7H 2 O, where Ln = Nd, Eu, Gd, with Ln:TMDGA ratios of 1:1, 1:2, and 1:3, respectively. Further, the compounds have been analyzed using vibrational spectroscopy (both Raman and FT-IR), as well as variable temperature fluorescence spectroscopy. A spectrophotometric titration of Eu(III) was performed to confirm the presence of the [Eu(TMDGA) n ] 3+ ( n = 1, 2, and 3) species in solution and to compare the individual solid-state emission spectra to their respective analogues in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

A computer simulation of the turbocharged turbo compounded diesel engine system: A description of the thermodynamic and heat transfer models

A computer simulation of the turbocharged turbocompounded direct-injection diesel engine system was developed in order to study the performance characteristics of the total system as major design parameters and materials are varied. Quasi-steady flow models of the compressor, turbines, manifolds, intercooler, and ducting are coupled with a multicylinder reciprocator diesel model, where each cylinder undergoes the same thermodynamic cycle. The master cylinder model describes the reciprocator intake, compression, combustion and exhaust processes in sufficient detail to define the mass and energy transfers in each subsystem of the total engine system. Appropriate thermal loading models relate the heat flow through critical system components to material properties and design details. From this information, the simulation predicts the performance gains, and assesses the system design trade-offs which would result from the introduction of selected heat transfer reduction materials in key system components, over a range of operating conditions.

Assanis, D. N.↗
DOE OSTI2023

Presence of aromatic-rich organic matter and its characterization in grout materials: Implications for radionuclide immobilization

Grout materials are commonly used to immobilize low-level radioactive waste. Organic moieties can be unintentionally present in common ingredients used to make these grout waste forms, which may result in the formation of organo-radionuclide species. These species can positively or negatively affect the immobilization efficiency. However, the presence of organic carbon compounds is rarely considered in models or characterized chemically. Here, we quantify the organic pool of grout formulations with and without slag, as well as the individual dry ingredients used to make the grout samples (ordinary Portland cement (OPC), slag and fly ash), including total organic carbon (TOC) and black carbon, followed by aromaticity evaluation and molecular characterization via Electro Spray Ionization Fourier-Transform Ion Cyclotron Resonance Mass Spectrometry (ESI-FTICRMS). All dry grout ingredients contained significant amounts of organic carbon, ranging from 550 mg/kg to 6250 mg/kg for the TOC pool, with an averaged abundance of 2933 ± 2537 mg/kg, of which 60 ± 29% was composed of black carbon. The significant abundance of a black carbon pool implies the presence of the aromatic-like compounds, which was further identified by both phosphate buffer-assisted aromaticity evaluation (e.g., >1000 mg-C/kg as aromatic-like carbon in the OPC) and dichloromethane (DCM) extraction with ESIFTICRMS analysis. Besides aromatic-like compounds, other organic moieties were also detected in the OPC, such as carboxyl-containing aliphatic molecules. While the organic compound only consists of minor fractions of the grout materials investigated, our observations of the presence of various radionuclide-binding organic moieties suggests the potential formation of organo-radionuclides, such as radioiodine, which might be present at lower molar concentrations than TOC. Here, evaluating the role of organic carbon complexation in controlling the disposed radionuclides, especially for those radionuclides with strong association with organic carbon, has important implications for the long-term immobilization of radioactive waste in grout systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Accelerated Scaling to Rapid Open-Air Fabrication of Durable Perovskite Solar Modules

The goals of this SETO project (DE-EE0008559, Accelerated Scaling to Rapid Open-Air Fabrication of Durable Perovskite Solar modules) are to address the principal challenges towards the successful commercialization of perovskite solar modules utilizing scalable, high-throughput open-air spray deposition. The successful outcome of the project will provide the foundation of an all open-air spray deposited perovskite solar module with hole transport layer (HTL), perovskite, electron transport layer (ETL), and barrier layer development while establishing a fundamental understanding of perovskite device behavior under accelerated aging conditions. Through this program, we have made significant progress towards a commercializable pathway for perovskites. (1) We’ve demonstrated the successful open-air deposition of perovskite and transport layer materials. These deposition methods were chosen for their inherent scalability, and open-air processing enables a significant reduction in processing costs. These methods are also compatible with high throughputs, demonstrating the fastest perovskite film deposition at these performance levels. (2) Development of a unique all-fiber laser scribing procedure provides a high-performance, low-cost method for further improvements in scalability. (3) Our group has also placed a unique emphasis on device stability. The development of testing standards for perovskite modules is required to thoroughly evaluate potential candidates for commercialization, and we’ve taken inspiration from current industry standards to provide an honest insight into the performance and reliability of our devices. (4) An extensive cost model detailing the specific contributions of each device layer and production component provides the most thorough evaluation of any perovskite technology against conventional silicon and compound semiconductor solar devices. The cost model is a critical advancement that will provide the foundation for evaluating the levelized cost of energy (LCOE) of this technology.

14 SOLAR ENERGY↗
DOE OSTI2020

Prediction of exotic magnetic states in the alkali-metal quasi-one-dimensional iron selenide compound Na 2 FeSe 2

The magnetic and electronic phase diagram of a model for the quasi-one-dimensional alkali-metal iron selenide compound Na 2 FeSe 2 is presented. The novelty of this material is that the valence of iron is Fe 2+ , contrary to most other iron-chain compounds with valence Fe 3+ . Using first-principles techniques, we developed a three-orbital tight-binding model that reproduces the ab initio band structure near the Fermi level. Including Hubbard and Hund couplings and studying the model via the density-matrix renormalization group and Lanczos methods, we constructed the ground-state phase diagram. A robust region where the block state ↑↑↓↓↑↑↓↓ is stabilized was unveiled. The analog state in iron ladders, employing 2×2 ferromagnetic blocks, is by now well established, but in chains a block magnetic order has not been observed yet in real materials. The phase diagram also contains a large region of canonical staggered spin order ↑↓↑↓↑↓↑ at very large Hubbard repulsion. At the block-to-staggered transition region, an exotic phase is stabilized with a mixture of both states: an inhomogeneous orbital-selective charge density wave with the exotic spin configuration ↑↑↓↑↓↓↑↓. Our predictions for Na 2 FeSe 2 may guide crystal growers and neutron-scattering experimentalists towards the realization of block states in one-dimensional iron selenide chain materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

BioPhotovoltaics: New paradigm towards high-efficiency and high-stability cells

In this project, we demonstrated significant progress in the development of Bio-Photovoltaic (BioPV) technology, with a particular focus on the transition from the initial success with Artemisinin (ART) to the development of the E1 compound. This journey began with the exploration of less conformationally restricted analogs of ART, leading to the discovery of E1. The initial success in the first quarter with ART set a precedent for the project, guiding our approach in molecular selection and design. Our computational studies provided a solid rationale for selecting specific biomolecules, with density functional theory calculations revealing the potential of certain molecules to form beneficial interactions with perovskite. This was a crucial step in narrowing down the candidate molecules from a broader selection. Subsequently, our approach involved simplifying these molecules to refine their properties and enhance their performance in bioPV applications. The ART-MAPbI3 films, for example, showcased not only high carrier mobility and hydrophobicity but also a significant increase in PCE. The evolution from ART to E1 was marked by a thorough understanding of molecular interactions and their impact on the material’s performance. This progression, from the complexity of lead candidates to the modeling and testing of simplified compounds, has culminated in the development of next-generation biomolecules with vastly improved properties. The link between E1 and ART, through this enhanced understanding, has been compelling and instrumental in achieving the milestones set forth in our project. The success in material and device performance underscores the importance of fundamental molecular design parameters, pointing towards future potential in the field of bioPV technology.

14 SOLAR ENERGY↗
DOE OSTI2022

Sea level extremes and compounding marine heatwaves in coastal Indonesia

Low-lying island nations like Indonesia are vulnerable to sea level Height EXtremes (HEXs). When compounded by marine heatwaves, HEXs have larger ecological and societal impact. Here we combine observations with model simulations, to investigate the HEXs and Compound Height-Heat Extremes (CHHEXs) along the Indian Ocean coast of Indonesia in recent decades. We find that anthropogenic sea level rise combined with decadal climate variability causes increased occurrence of HEXs during 2010–2017. Both HEXs and CHHEXs are driven by equatorial westerly and longshore northwesterly wind anomalies. For most HEXs, which occur during December-March, downwelling favorable northwest monsoon winds are enhanced but enhanced vertical mixing limits surface warming. For most CHHEXs, wind anomalies associated with a negative Indian Ocean Dipole (IOD) and co-occurring La Niña weaken the southeasterlies and cooling from coastal upwelling during May-June and November-December. Our findings emphasize the important interplay between anthropogenic warming and climate variability in affecting regional extremes.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2011

Atmospheric Composition Change: Climate-Chemistry Interactions

Chemically active climate compounds are either primary compounds such as methane (CH4), removed by oxidation in the atmosphere, or secondary compounds such as ozone (O3), sulfate and organic aerosols, formed and removed in the atmosphere. Man-induced climate-chemistry interaction is a two-way process: Emissions of pollutants change the atmospheric composition contributing to climate change through the aforementioned climate components, and climate change, through changes in temperature, dynamics, the hydrological cycle, atmospheric stability, and biosphere-atmosphere interactions, affects the atmospheric composition and oxidation processes in the troposphere. Here we present progress in our understanding of processes of importance for climate-chemistry interactions, and their contributions to changes in atmospheric composition and climate forcing. A key factor is the oxidation potential involving compounds such as O3 and the hydroxyl radical (OH). Reported studies represent both current and future changes. Reported results include new estimates of radiative forcing based on extensive model studies of chemically active climate compounds such as O3, and of particles inducing both direct and indirect effects. Through EU projects such as ACCENT, QUANTIFY, and the AEROCOM project, extensive studies on regional and sector-wise differences in the impact on atmospheric distribution are performed. Studies have shown that land-based emissions have a different effect on climate than ship and aircraft emissions, and different measures are needed to reduce the climate impact. Several areas where climate change can affect the tropospheric oxidation process and the chemical composition are identified. This can take place through enhanced stratospheric-tropospheric exchange of ozone, more frequent periods with stable conditions favouring pollution build up over industrial areas, enhanced temperature-induced biogenic emissions, methane releases from permafrost thawing, and enhanced concentration through reduced biospheric uptake. During the last 510 years, new observational data have been made available and used for model validation and the study of atmospheric processes. Although there are significant uncertainties in the modelling of composition changes, access to new observational data has improved modelling capability. Emission scenarios for the coming decades have a large uncertainty range, in particular with respect to regional trends, leading to a significant uncertainty range in estimated regional composition changes and climate impact.

Atmosphere climate chemistry↗
DOE OSTI2026

CoSn-type NiIn1–xSbx (0 ≤ x ≤ 0.17): Site-Selective Substitution, Electronic Structure, Chemical Bonding, and Structural Transformation

CoSn-type intermetallic compounds have emerged as a model platform for Kagome-derived flat-band physics, where subtle chemical perturbations can strongly influence electronic structure and phase stability. Here, we present a combined experimental and theoretical study of Sb-substitution in CoSn-type NiIn1–xSbx (0 ≤ x ≤ 0.17) to elucidate the interplay between site selectivity, solubility limit, chemical bonding, and electronic structure. Rietveld refinements on Neutron powder diffraction data confirmed the selective Sb-substitution at the electron-rich In2 (2d) site forming the honeycomb substructure, while the In1 (1a) site within the Kagome layer remains exclusively occupied by In. Density functional theory (DFT) calculations revealed that pristine CoSn-type NiIn hosts Ni 3d-dominated flat bands near the Fermi level (EF), originating from the Kagome-like Ni substructure. Partial replacement of In by Sb within the honeycomb layer alters these flat-band features below EF, reducing the density of states and suppressing the flat-band topology near the Fermi level. Orbital-resolved electronic structure and chemical-bonding analyses show that Sb-substitution enhances Ni-p-block (In/Sb) covalency and optimizes charge compensation, stabilizing the CoSn-type structure up to the solubility limit x ≈ 0.17. Beyond the limit, the higher-Sb compositions show satellite reflections consistent with an incommensurately modulated phase. These results establish a link between site-selective chemical substitution, bonding optimization, and flat-band electronic structure evolution, providing fundamental insights into how chemical substitution influences the electronic properties of Kagome-based intermetallic compounds.

Roy, Nilanjan [National Institute of Technology Si↗
NASA NTRS1977

Pyrolysis of organic compounds in the presence of ammonia The Viking Mars lander site alteration experiment

The influence of ammonia on the pyrolysis pattern of selected organic substances sorbed on an inorganic phase was investigated. The thermal degradation products were identified by gas chromatography-mass spectrometry. The feasibility of this technique was tested on a meteoritic sample. All substances examined react with ammonia at the pyrolysis temperature of 500 C, the major products being nitriles and heterocyclic compounds in which nitrogen was incorporated. Based on these results, a model for the non-equilibrium production of organic compounds on Jupiter is discussed. The investigation was performed in connection with the Viking lander molecular analysis. The results obtained indicate that the concentrations of ammonia in the retrorocket fuel exhaust would have been probably too small to produce significant changes in the Martian soil organic compounds if any were found.

Holzer, G.↗
NASA NTRS2023

The Projected Future Degradation in Air Quality is Caused by More Abundant Natural Aerosols in a Warmer World

Previous studies suggest that greenhouse gas-induced warming can lead to increased fine particulate matter concentrations and degraded air quality. However, significant uncertainties remain regarding the sign and magnitude of the response to warming and the underlying mechanisms. Here, we show that thirteen models from the Coupled Model Intercomparison Project Phase 6 all project an increase in global average concentrations of fine particulate matter in response to rising carbon dioxide concentrations, but the range of increase across models is wide. The two main contributors to this increase are increased abundance of dust and secondary organic aerosols via intensified West African monsoon and enhanced emissions of biogenic volatile organic compounds, respectively. Much of the inter-model spread is related to different treatment of biogenic volatile organic compounds. Our results highlight the importance of natural aerosols in degrading air quality under current warming, while also emphasizing that improved understanding of biogenic volatile organic compounds emissions due to climate change is essential for numerically assessing future air quality.

Climate and Earth system modelling↗
NASA NTRS2011

Developing Flexible Discrete Event Simulation Models in an Uncertain Policy Environment

On February 1st, 2010 U.S. President Barack Obama submitted to Congress his proposed budget request for Fiscal Year 2011. This budget included significant changes to the National Aeronautics and Space Administration (NASA), including the proposed cancellation of the Constellation Program. This change proved to be controversial and Congressional approval of the program's official cancellation would take many months to complete. During this same period an end-to-end discrete event simulation (DES) model of Constellation operations was being built through the joint efforts of Productivity Apex Inc. (PAl) and Science Applications International Corporation (SAIC) teams under the guidance of NASA. The uncertainty in regards to the Constellation program presented a major challenge to the DES team, as to: continue the development of this program-of-record simulation, while at the same time remain prepared for possible changes to the program. This required the team to rethink how it would develop it's model and make it flexible enough to support possible future vehicles while at the same time be specific enough to support the program-of-record. This challenge was compounded by the fact that this model was being developed through the traditional DES process-orientation which lacked the flexibility of object-oriented approaches. The team met this challenge through significant pre-planning that led to the "modularization" of the model's structure by identifying what was generic, finding natural logic break points, and the standardization of interlogic numbering system. The outcome of this work resulted in a model that not only was ready to be easily modified to support any future rocket programs, but also a model that was extremely structured and organized in a way that facilitated rapid verification. This paper discusses in detail the process the team followed to build this model and the many advantages this method provides builders of traditional process-oriented discrete event simulations.

Miranda, David J.↗
DOE OSTI2021

Hidden first-order phase transitions and large magnetocaloric effects in GdNi 1-x Co x

We report a large magnetocaloric effect tunable between 70 and 115 K in a series of rare earth intermetallic compounds GdNi 1-x Co x with x varying from 0 to 0.15 that manifest rather unconventional second-order phase transitions with concurrent changes in both magnetic and crystallographic sublattices. While the Curie temperature, TC, linearly increases with x(Co), the maximum isothermal entropy change induced by magnetic field varying between 0 and 50 kOe slightly decreases from 14 J/kg K at 71 K when x(Co) = 0 to10 J/kg K at 115 K when x(Co) = 0.15. Additionally, the temperature-averaged entropy change figures of merit calculated at temperature spans of 10 K for all examined compositions are comparable to those of the best known magnetocaloric materials that exhibit second-order phase transitions, including elemental Gd and La(Fe,Co,Si) 13 alloys. Through a detailed analysis of the magnetic field-induced entropy changes along with assessment of critical exponents we explore the role magneto-elastic coupling plays in controlling magnetocaloric properties of GdNi 1-x Co x compounds. We also formulate a model based on the mean field theory approximation to describe both magnetic and magnetocaloric properties of the title materials in qualitative agreement with experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Navigating Transition-Metal Chemical Space: Artificial Intelligence for First-Principles Design

Conspectus The variability of chemical bonding in open-shell transition-metal complexes not only motivates their study as functional materials and catalysts but also challenges conventional computational modeling tools. Here, tailoring ligand chemistry can alter preferred spin or oxidation states as well as electronic structure properties and reactivity, creating vast regions of chemical space to explore when designing new materials atom by atom. Although first-principles density functional theory (DFT) remains the workhorse of computational chemistry in mechanism deduction and property prediction, it is of limited use here. DFT is both far too computationally costly for widespread exploration of transition-metal chemical space and also prone to inaccuracies that limit its predictive performance for localized d electrons in transition-metal complexes. These challenges starkly contrast with the well-trodden regions of small-organic-molecule chemical space, where the analytical forms of molecular mechanics force fields and semiempirical theories have for decades accelerated the discovery of new molecules, accurate DFT functional performance has been demonstrated, and gold-standard methods from correlated wavefunction theory can predict experimental results to chemical accuracy. The combined promise of transition-metal chemical space exploration and lack of established tools has mandated a distinct approach. In this Account, we outline the path we charted in exploration of transition-metal chemical space starting from the first machine learning (ML) models (i.e., artificial neural network and kernel ridge regression) and representations for the prediction of open-shell transition-metal complex properties. The distinct importance of the immediate coordination environment of the metal center as well as the lack of low-level methods to accurately predict structural properties in this coordination environment first motivated and then benefited from these ML models and representations. Once developed, the recipe for prediction of geometric, spin state, and redox potential properties was straightforwardly extended to a diverse range of other properties, including in catalysis, computational “feasibility”, and the gas separation properties of periodic metal–organic frameworks. Interpretation of selected features most important for model prediction revealed new ways to encapsulate design rules and confirmed that models were robustly mapping essential structure–property relationships. Encountering the special challenge of ensuring that good model performance could generalize to new discovery targets motivated investigation of how to best carry out model uncertainty quantification. Distance-based approaches, whether in model latent space or in carefully engineered feature space, provided intuitive measures of the domain of applicability. With all of these pieces together, ML can be harnessed as an engine to tackle the large-scale exploration of transition-metal chemical space needed to satisfy multiple objectives using efficient global optimization methods. In practical terms, bringing these artificial intelligence tools to bear on the problems of transition-metal chemical space exploration has resulted in ML-model assessments of large, multimillion compound spaces in minutes and validated new design leads in weeks instead of decades.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Spatial separation of triplet excitons drives endothermic singlet fission

Molecules that undergo singlet fission, converting singlet excitons into pairs of triplet excitons, have potential as photovoltaic materials. The possible advantages of endothermic singlet fission (enhanced use of photon energy and larger triplet energies for coupling with common absorbers) motivated us to assess the role of exciton delocalization in the activation of this process. Here we report the synthesis of a series of linear perylene oligomers that undergo endothermic singlet fission and have endothermicities in the range 5-10 kBT at room temperature in solution. We study these compounds using transient spectroscopy and modelling to unravel the singlet and triplet dynamics. We show that the minimal number of coupled chromophores needed to undergo endothermic singlet fission is three, which provides sufficient statistical space for triplet excitons to separate and avoid annihilation - and a subsequent fast return to the singlet state. Our data additionally suggest that torsional motion of chromophores about the molecular axis following triplet-pair separation contributes to the increase in entropy, thus lengthening the triplet lifetime in longer oligomers.

14 SOLAR ENERGY↗
DOE OSTI2023

Enhancing the accuracy of density functional tight binding models through ChIMES many-body interaction potentials

Semi-empirical quantum models such as Density Functional Tight Binding (DFTB) are attractive methods for obtaining quantum simulation data at longer time and length scales than possible with standard approaches. However, application of these models can require lengthy effort due to the lack of a systematic approach for their development. In this work, we discuss the use of the Chebyshev Interaction Model for Efficient Simulation (ChIMES) to create rapidly parameterized DFTB models, which exhibit strong transferability due to the inclusion of many-body interactions that might otherwise be inaccurate. We apply our modeling approach to silicon polymorphs and review previous work on titanium hydride. We also review the creation of a general purpose DFTB/ChIMES model for organic molecules and compounds that approaches hybrid functional and coupled cluster accuracy with two orders of magnitude fewer parameters than similar neural network approaches. In all cases, DFTB/ChIMES yields similar accuracy to the underlying quantum method with orders of magnitude improvement in computational cost. In conclusion, our developments provide a way to create computationally efficient and highly accurate simulations over varying extreme thermodynamic conditions, where physical and chemical properties can be difficult to interrogate directly, and there is historically a significant reliance on theoretical approaches for interpretation and validation of experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗