Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model benchmarking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Study on Conversion from an Existing Alternating Current Medium-Voltage Line to a Direct Current Line: A Case of Load or Source Expansion

Simultaneous increase of power generation through renewable systems and load due owing to the rapid growth in electrified road transportation systems, leads to new challenges in the design, operation, and protection of distribution-level electrical power systems. This paper addresses challenges related to the integration of new sources or loads to a distribution grid through long alternating current lines. The International Council on Large Electric Systems medium-voltage benchmark model developed for North America was used for simulation studies. Use cases were developed to illuminate the issues related to long alternating current lines and the usefulness of medium-voltage direct current lines in a distribution network.

Jaldanki, Sreenivasa↗

Detection and Diagnosis of Data Integrity Attacks in Solar Farms Based on Multilayer Long Short-Term Memory Network

Photovoltaic (PV) systems are becoming more vulnerable to cyber threats. In response to this emerging concern, developing cyber-secure power electronics converters has received increased attention from the IEEE Power Electronics Society that recently launched a cyber-physical-security initiative. Here this letter proposes a deep sequence learning based diagnosis solution for data integrity attacks on PV systems in smart grids, including dc–dc and dc–ac converters. The multilayer long short-term memory networks are used to leverage time-series electric waveform data from current and voltage sensors in PV systems. The proposed method has been evaluated in a PV smart grid benchmark model with extensive quantitative analysis. As a comparison, we have evaluated classic data-driven methods, including K-nearest neighbor, decision tree, support vector machine, artificial neural network, and convolutional neural network. Comparison results verify performances of the proposed method for detection and diagnosis of various data integrity attacks on PV systems.

42 ENGINEERING↗

Separating the Wheat from the Chaff: Comparative Visual Cues for Transparent Diagnostics of Competing Models

Experts in data and physical sciences have to regularly grapple with the problem of competing models. Be it analytical or physics-based models, a cross-cutting challenge for experts is to reliably diagnose which model outcomes appropriately predict or simulate real-world phenomena. Expert judgment involves reconciling information across many, and often, conflicting criteria that describe the quality of model outcomes. In this paper, through a design study with climate scientists, we develop a deeper understanding of the problem and solution space of model diagnostics, resulting in the following contributions: i) a problem and task characterization using which we map experts’ model diagnostics goals to multi-way visual comparison tasks, ii) a design space of comparative visual cues for letting experts quickly understand the degree of disagreement among competing models and gauge the degree of stability of model outputs with respect to alternative criteria, and iii) design and evaluation of MyriadCues, an interactive visualization interface for exploring alternative hypotheses and insights about good and bad models by leveraging comparative visual cues. Here, we present case studies and subjective feedback by experts, which validate how MyriadCues enables more transparent model diagnostic mechanisms, as compared to the state of the art.

54 ENVIRONMENTAL SCIENCES↗

TU-F-BRE-06: Flattening-Filter-Free Beam Quality Correction Factor Determination Using Experimental and Monte Carlo Methods

Purpose: To investigate beam quality correction factors for the flattening-filter-free (FFF) energies of the TrueBeam™ accelerator based on a dosimetry formalism for small and nonstandard fields. Methods: Three detectors - an Exradin W1 scintillator, Sun Nuclear EDGE diode, and LiF(Mg,Tl) TLD-100 chips - were investigated to determine their applicability as tools to measure quality correction factors for ionization chambers in the small and nonstandard fields of the TrueBeam™. Volume-averaging effects and energy dependence were observed in fields ranging from 1×1 to 40×40 cm{sup 2} for 6 MV and 10 MV beam energies using both FFF and flattened beam modes. Correction factors were determined for three ionization chambers: an Exradin A12 Farmer-type chamber, an Exradin A1SL scanning chamber, and an Exradin A26 reference-class microchamber. Beam quality corrections were also obtained using a benchmarked model of the TrueBeam™ created with the BEAMnrc user code of EGSnrc. Results: All three detectors demonstrated measureable energy dependence in the megavoltage range. The EDGE diode was deemed the most appropriate tool for beam quality correction factor measurements due to its low energy dependence and small size; however, alanine will be used in the future to reduce energy dependent effects even further. Measured k{sub Qmsr,Q} corrections of up to 4% were found for the 6MV FFF and 10 MV FFF beams, corresponding to a discrepancy of up to 3% compared to TG-51-determined dose. Up to a 10% k{sub Qclin,Qmsr} correction was measured for small fields referenced to a 10×10 cm{sup 2} field of the same energy. Much larger corrections were determined using the Monte Carlo model, and these discrepancies require further investigation. Conclusion: Progress has been made toward determining beam quality correction factors for the small and nonstandard fields of the TrueBeam™ accelerator. Further work must be done to ensure greater accuracy in patient treatments with this new modality.

07 ISOTOPE AND RADIATION SOURCES↗

Search for supersymmetric particles in events with lepton pairs and large missing transverse momentum in $\sqrt{s}=7~\mbox{TeV}$ proton–proton collisions with the ATLAS experiment

Results are presented of searches for the production of supersymmetric particles decaying into final states with missing transverse momentum and exactly two isolated leptons in √s = 7 TeV proton-proton collisions at the Large Hadron Collider. Search strategies requiring lepton pairs with identical-sign or opposite-sign electric charges are described. In a data sample corresponding to an integrated luminosity of 35 pb -1 collected with the ATLAS detector, no significant excesses are observed. Based on specific benchmark models, limits are placed on the squark mass between 450 and 690 GeV for squarks approximately degenerate in mass with gluinos, depending on the supersymmetric mass hierarchy considered.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for a fermiophobic Higgs boson in the diphoton decay channel with the ATLAS detector

A search for a fermiophobic Higgs boson using diphoton events produced in proton-proton collisions at a centre-of-mass energy of √s = 7 TeV is performed using data corresponding to an integrated luminosity of 4.9 fb -1 collected by the ATLAS experiment at the Large Hadron Collider. A specific benchmark model is considered where all the fermion couplings to the Higgs boson are set to zero and the bosonic couplings are kept at the Standard Model values (fermiophobic Higgs model). The largest excess with respect to the background-only hypothesis is found at 125.5 GeV, with a local significance of 2.9 standard deviations, which reduces to 1.6 standard deviations when taking into account the look-elsewhere effect. The data exclude the fermiophobic Higgs model in the ranges 110.0–118.0 GeV and 119.5–121.0 GeV at 95 % confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for heavy resonances decaying into WW in the $e\nu\mu\nu$ final state in $pp$ collisions at $\sqrt{s}=13$ TeV with the ATLAS detector

A search for neutral heavy resonances is performed in the WW→eνμν decay channel using pp collision data corresponding to an integrated luminosity of 36.1fb -1 , collected at a centre-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. No evidence of such heavy resonances is found. In the search for production via the quark–antiquark annihilation or gluon–gluon fusion process, upper limits on σ X ×B(X→WW) as a function of the resonance mass are obtained in the mass range between 200 GeV and up to 5 TeV for various benchmark models: a Higgs-like scalar in different width scenarios, a two-Higgs-doublet model, a heavy vector triplet model, and a warped extra dimensions model. Finally, in the vector-boson fusion process, constraints are also obtained on these resonances, as well as on a Higgs boson in the Georgi–Machacek model and a heavy tensor particle coupling only to gauge bosons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the production cross-section for a Z boson in association with b - or c -jets in proton–proton collisions at $\sqrt{s} = 13$ TeV with the ATLAS detector

This paper presents a measurement of the production cross-section of a Z boson in association with b- or c-jets, in proton–proton collisions at $\sqrt{s} = 13$ TeV with the ATLAS experiment at the Large Hadron Collider using data corresponding to an integrated luminosity of 140 fb –1 . Inclusive and differential cross-sections are measured for events containing a Z boson decaying into electrons or muons and produced in association with at least one b-jet, at least one c-jet, or at least two b-jets with transverse momentum p T > 20 GeV and rapidity |y| < 2.5. Predictions from several Monte Carlo generators based on next-to-leading-order matrix elements interfaced with a parton-shower simulation, with different choices of flavour schemes for initial-state partons, are compared with the measured cross-sections. The results are also compared with novel predictions, based on infrared and collinear safe jet flavour dressing algorithms. Selected Z+≥ 1 c-jet observables, optimized for sensitivity to intrinsic-charm, are compared with benchmark models with different intrinsic-charm fractions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optimal Financing Decision in a Contract Food Supply Chain with Capital Constraint

To solve the financing problem of the food producers, we consider a two‐echelon contract food supply chain composed of a family farm with capital constraints and a food processing enterprise. With no capital constraints as the benchmark model, we analyze optimal decisions of the family farm and the food processing enterprise in the case of bank financing with bank participation only and bank financing with “government, bank, and insurance” coparticipation. Then, we discuss how the risk of yield uncertainty influences the optimal decisions and profits of the family farm and the food processing enterprise under different financing situation. Meanwhile, the reason why the government subsidizes agriculture is explored, and the policy of minimum purchase price of the food is initiated when the market price is too low. Finally, the numerical examples and sensitivity analysis are presented. The results show that the bank financing with “government, bank, and insurance” coparticipation improves the welfare of supply chain members more obviously than the bank financing with bank participation only; when the rice price is too low, the policy of minimum purchase price of food is initiated, which increases the revenue and the growing enthusiasm of the family farm; the profits of the family farm and the food processing enterprise will decrease as the risk of yield uncertainty increases in the case of bank financing, and the risk of yield uncertainty will be reduced for the family farm when bank financing with “government, bank, and insurance” coparticipation.

Luo, Ying (ORCID:0000000158101443)↗

Measurement and modeling of beam transport in the FODO line of the Spallation Neutron Source Beam Test Facility

Ongoing studies at the Spallation Neutron Source (SNS) Beam Test Facility (BTF) seek to understand and model bunch dynamics in a high-power LINAC front-end. The BTF has recently been upgraded with a reconfiguration from a U-shaped line to a Straight line. We report the current state of model benchmarking, with a focus on RMS beam sizes within the FODO line. The beam measurement is obtained via three camera/screen pairs in the FODO line. This presentation discusses the methodology and results of this measurement.

Thompson, Trent↗

Final Report on Utilization of TRU TRISO Fuel as Applied to HTR Systems Part I: Pebble Bed Reactors

The Deep-Burn (DB) concept [ ] focuses on the destruction of transuranic nuclides from used light water reactor (LWR) fuel. These transuranic nuclides are incorporated into tri-isotopic (TRISO) coated fuel particles and used in gas-cooled reactors with the aim of a fractional fuel burnup of 60 to 70% in fissions per initial metal atom (FIMA). This high performance is expected through the use of multiple recirculation passes of the fuel in pebble form without any physical or chemical changes between passes. In particular, the concept does not call for reprocessing of the fuel between passes. In principle, the DB pebble bed concept employs the same reactor designs as the presently envisioned low-enriched uranium core designs, such as the 400 MWth Pebble Bed Modular Reactor (PBMR-400) [ ]. Although it has been shown in the previous Fiscal Year (FY) (2009) that a PuO2 fueled pebble bed reactor concept is viable, achieving a high fuel burnup while remaining within safety-imposed prescribed operational limits for fuel temperature, power peaking, and temperature reactivity feedback coefficients for the entire temperature range, is challenging. The presence of the isotopes 239Pu, 240Pu, and 241Pu that have resonances in the thermal energy range significantly modifies the neutron thermal energy spectrum as compared to a standard, UO2-fueled core. Therefore, the DB pebble bed core exhibits a relatively hard neutron energy spectrum. However, regions within the pebble bed that are near the graphite reflectors experience a locally softer spectrum. This can lead to power and temperature peaking in these regions. Furthermore, a shift of the thermal energy spectrum with increasing temperature can lead to increased absorption in the resonances of the fissile Pu isotopes. This can lead to a positive temperature reactivity coefficient for the graphite moderator under certain operating conditions. Regarding the coated particle performance, the FY 2009 investigations showed that no significant failure is to be expected for the reference fuel particle during normal operation. It was found, however, that the sensitivity of the coating stress to the CO production in the kernel was large. The CO production is expected to be higher in DB fuel than in UO2 fuel, but its exact level has a high uncertainty. Furthermore, in the fuel performance analysis transient conditions were not yet taken into account. The effort of this task in FY 2010 has focused on the optimization of the core to maximize the pebble discharge burnup level, while retaining its inherent safety characteristics. Using generic pebble bed reactor cores, this task will perform physics calculations to evaluate the capabilities of the pebble bed reactor to perform utilization and destruction of LWR used-fuel transuranics. The task will use established benchmarked models, and will introduce modeling advancements appropriate to the nature of the fuel considered (high transuranic [TRU] content and high burn-up). Accomplishments of this work include: •Core analysis of a HTR-MODULE design loaded with Deep-Burn fuel. •Core analysis of a HTR-MODULE design loaded with Deep-Burn fuel and Uranium. •Core analysis of a HTR-MODULE design loaded with Deep-Burn fuel and Modified Open Cycle Components. •Core analysis of a HTR-MODULE design loaded with Deep-Burn fuel and Americium targets.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Searches for Light- and Heavy-flavor Three-jet Resonances in proton-proton Collisions with the CMS Detector at $\sqrt{s}$ = 8 TeV

A search for three-jet hadronic resonance production in proton-proton collisions at 8 TeV center-of-mass energy has been conducted by the CMS Collaboration at the LHC. The data set corresponds to an integrated luminosity of 19.4 fb -1 . The search method is modelindependent. Events are selected that contain a large number of jets with high transverse momentum. An ensemble of jets is used to extract a new possible signal from copious QCD background. Event selection is optimized using a benchmark model where supersymmetric gluinos are pair-produced and each of the gluinos decays exclusively into three jets. Two scenarios of this decay are considered denoted by the RPV couplings λ'' 112 and λ'' 113 or λ'' 223 . The first coupling allows for gluinos to decay into only light-flavor jets, while the latter two allow decays into one heavy-flavor and two light-flavor jets. No significant deviation is found between the selected events and the expected standard model multijet and t$\bar{t}$ background. For gluinos decaying through 00 112, masses below 650 GeV are excluded at the 95% confidence level. The search including heavy-flavor jets in the final state with the couplings λ'' 113 or λ'' 223 is the first of its kind. Gluinos decaying into one heavy-flavor and two light-flavor jets are excluded for masses between 200 and 835 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Magnetic Induction Sensors for Detecting Anomalous Shielding of Radiological and Nuclear Materials: A Feasibility Study

This study examined a concept for improving the nation's ability to detect unauthorized transport of radiological and nuclear material that involves detecting not the radiological or nuclear material itself, but rather the anomalous presence of materials, such as lead and tungsten, typically used to shield such illicit materials from detection. Specifically, the project studied a potentially inexpensive, non-intrusive, and fast method of detecting anomalous shielding: use of magnetic induction sensors to measure currents induced in conductors by a driver coil. The first phase of this work, documented in this report, identified the signatures of materials of interest, assessed the usefulness of measured signatures for discrimination between materials, and then benchmarked models and calculations. The next task involved assessing the strength of these signatures when the materials of interest were enclosed within other materials, such as aluminum and steel, of various thicknesses. A final task mimicked a real-world scenario by testing the ability to detect material signatures of interest at a scale of a vehicle or cargo vessel against a cluttered backdrop, with and without the shielding of another material, such as aluminum or steel. This final task raised doubts regarding whether this detection scheme will be useful under real-world conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effects of nitrogen on tungsten surfaces investigated with low energy ion scattering

The effect of nitrogen on the surfaces of polycrystalline ITER-grade tungsten and a tungsten single crystal were studied with low energy ion scattering (LEIS) and direct recoil spectroscopy (DRS). LEIS and DRS measurements on both tungsten surfaces were performed in an ultra-high vacuum system as various quantities of N 2 were introduced into the chamber through a variable leak valve. The obtained ion energy spectra reveal that nitrogen was readily adsorbed onto the surface, in turn limiting the amount of hydrogen that could be adsorbed onto the surface. These results not only provide insight into how the presence of nitrogen on tungsten surfaces may play a role in hydrogen adsorption and retention, but also serve to benchmark models being developed to describe the H-N-W system.

36 MATERIALS SCIENCE↗

Final Design of a New Pulsed-Neutron Die-Away Experimental Testbed for Thermal Scattering Law Benchmarks (PNDA) (IER-501 CED-2)

This report presents the final design (CED-2) of IER-501, a testbed for pulsed-neutron die-away (PNDA) experiments at Lawrence Livermore National Laboratory (LLNL). The PNDA experiments will be high-quality benchmarks that serve to optimize and validate thermal neutron scattering laws (TSLs), which are high-priority nuclear data for the Department of Energy’s Nuclear Criticality Safety Program (NCSP). This CED-2 was guided by experimental results gathered from a prototype experimental set-up rather than with detailed simulations as is typically done for criticality experiments. The report presents the PNDA design and its equipment, and it documents the methodology used to postprocess the measured data. It discusses how experimental configurations influenced the decay-constant eigenvalue, or the integral parameter, of the experiment. The studied variations included the distance from the target to the generator, the orientation of the generator relative to the box, the orientation of the target to the generator, the effect of HDPE lining in the shielding box, the settings of the generator, and finally the benefits of using a low-scatter facility. From these results, a final configuration for the target, detectors, shielding box, and neutron generator was chosen. Two factors particularly influenced the chosen configuration: the reproducibility of the experiment’s geometry for benchmark modeling, and the minimization of measured neutrons scattered off the shielding box.

42 ENGINEERING↗

Sensitivity to Dijet Resonances at Proton-Proton Colliders

A significant benchmark for discovery at a proton-proton collider is the sensitivity to a dijet resonance, X, the intermediate state of the s-channel process $pp \rightarrow X \rightarrow 2\mbox{ jets}$. To probe the highest resonance masses, hadron collider experiments have used the classic technique of searching for bumps in the mass spectrum of two individually resolved jets. In this Snowmass 2021 study, we explore the search sensitivity to multiple benchmark models of dijet resonances at current and future proton-proton colliders. We present the expected masses for $5\sigma$ discovery and 95% confidence level exclusion of diquarks, colorons, excited quarks, $W^{\prime}s$, $Z^{\prime}s$ and Randall-Sundrum gravitons, resulting from accumulation of integrated luminosities between 10 and $10^5$ fb$^{-1}$, at proton-proton colliders operating at energies $\sqrt{s}=$ 13, 14, 27, 75, 100, 150, 300 and 500 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Investigating a Potential Hafnium Bias in SCALE [Slides]

Previous work has examined the evidence for a gadolinium bias within SCALE. This work extends the previous work to include benchmark models with hafnium experiments from the ICSBEP Handbook. VALID contains only one experiment with hafnium: MIX-COMP-THERM-008. Newly generated models provide an opportunity to assess the potential presence of a hafnium bias.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An ML-based terrestrial data fusion and augmentation framework to enable advanced understanding of the terrestrial carbon and water interactions

Soil moisture is essential to the terrestrial carbon and water cycles and land–atmosphere interactions. There are various types of soil moisture data, and each type has the distinct spatiotemporal strengths and limitations, depending on the diverse applications and retrieval methodologies of different data types (Li et al., in review; The PNNL-82151 FY23 Report). However, the limitations of different soil moisture data in terms of accuracy and spatiotemporal coverage hinder our ability to further understand the soil moisture dynamics across scales. To have a gap free soil moisture data product with a fine spatiotemporal coverage and vertical profiles, we train extreme gradient boosting (XGBoost) models by using (1) in-situ soil moisture measurements from the International Soil Moisture Network (ISMN), (2) soil moisture from the ECMWF reanalysis (ERA) at the 9 km and sub-daily spatiotemporal resolution, (3) the Daymet meteorological fields, and (4) data products that characterize surface conditions, including soil texture, organic content, topography, vegetation type, and rooting depth. We use the trained XGBoost models that have consistent performance across seven soil layers, i.e., 0–5 cm, 5–10 cm, 10–20 cm, 20–40 cm, 40–60 cm, 60–100 cm, and 100–200 cm, and the gridded model predictors to generate a soil moisture data at the 1 km and daily spatiotemporal resolution for the Continental United States (CONUS) from 2001–2020. This dataset can be broadly used for Earth system model benchmark, monitoring extreme weathers, making informed decisions regarding agriculture, water resource management, climate change mitigation, and ecosystem preservation.

58 GEOSCIENCES↗