Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mobility research”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Asymmetric electroosmotic flow and mobility measurements at nonstationary positions in the rectangular chamber

The electrophoretic mobility of a cell in solution is defined by its velocity divided by the electric field strength it experiences. An obvious way to measure the mobility of cells is to apply a constant electric field to a suspension of cells in a glass chamber and clock the velocities of individual cells through a microscope. This microscope method is the classic technique in cell electrophoresis and it has been used for the bulk of research in this field. Two aspects of the microscope method can critically affect the accuracy and consistency of its cell mobility measurements: (1) the electroosmotic fluctuations in the chamber from measurement to measurement; and (2) the number of cells which can be practically measured for statistically meaningful results. A new method of analyzing microelectrophoretic data using a computer program has been developed which addresses both of these aspects. It makes possible the mobility measurements of individual cells as positions throughout the rectangular chamber depth during asymmetric electroosmotic flow.

Source record↗
NASA NTRS1992

Introduction to Space Station Freedom

NASA field centers and contractors are organized to develop 'work packages' for Space Station Freedom. Marshall Space Flight Center and Boeing are building the U.S. laboratory and habitation modules, nodes, and environmental control and life support system; Johnson Space Center and McDonnell Douglas are responsible for truss structure, data management, propulsion systems, thermal control, and communications and guidance; Lewis Research Center and Rocketdyne are developing the power system. The Canadian Space Agency (CSA) is contributing a Mobile Servicing Center, Special Dextrous Manipulator, and Mobile Servicing Center Maintenance Depot. The National Space Development Agency of Japan (NASDA) is contributing a Japanese Experiment Module (JEM), which includes a pressurized module, logistics module, and exposed experiment facility. The European Space Agency (ESA) is contributing the Columbus laboratory module. NASA ground facilities, now in various stages of development to support Space Station Freedom, include: Marshall Space Flight Center's Payload Operations Integration Center and Payload Training Complex (Alabama), Johnson Space Center's Space Station Control Center and Space Station Training Facility (Texas), Lewis Research Center's Power System Facility (Ohio), and Kennedy Space Center's Space Station Processing Facility (Florida). Budget appropriations impact the development of the Space Station. In Fiscal Year 1988, Congress appropriated only half of the funds that NASA requested for the space station program ($393 million vs. $767 million). In FY 89, NASA sought $967 million for the program, and Congress appropriated $900 million. NASA's FY 90 request was $2.05 billion compared to an appropriation of $1.75 billion; the FY 91 request was $2.45 billion, and the appropriation was $1.9 billion. After NASA restructured the Space Station Freedom program in response to directions from Congress, the agency's full budget request of $2.029 billion for Space Station Freedom in FY 92 was appropriated. For FY 93, NASA is seeking $2.25 billion for the program; the planned budget for FY 94 is $2.5 billion. Further alterations to the hardware configuration for Freedom would be a serious setback; NASA intends 'to stick with the current baseline' and continue planning for utilization.

Kohrs, Richard↗
NASA NTRSDate not supplied

Conceptual Design of Tiltrotor Aircraft for Urban Air Mobility

There has been an abundance of new and novel aircraft designs created for Urban Air Mobility (UAM) in recent years. The National Aeronautics and Space Administration (NASA) contributes to the research and development of this industry in part by applying its aircraft design tools to create conceptual designs of UAM reference vehicles. The vehicles are intended to quantify the tradeoffs and performance capabilities necessary for VTOL (vertical takeoff and landing) aircraft in the UAM design space. The reference vehicles represent a variety of configurations that seek to encompass many of the design characteristics suitable for UAM. This work focuses on the conceptual design process of two new NASA reference vehicles. Both aircraft are configured as conventional tiltrotors, but one is powered by turboshaft engines, and one is fully electric. The sizing and performance of the two aircraft are discussed, as well as how the performance and characteristics compare to a selection of other NASA reference vehicles. It is found that the tiltrotor configuration is capable of reaching speeds 43% to 51% faster than the other turboshaft designs, and 54% to 93% faster than the other electric designs. The increased speed leads to a 24% to 42% decrease in overall mission time.

Conceptual Design↗
NASA NTRS2019

Exploration of Near-Term Potential Routes and Procedures for Urban Air Mobility

Urban air mobility is gaining interest as the need for On Demand Mobility in today's congested traffic is becoming high in metropolitan areas. Urban Air Mobility (UAM) is envisioned as a concept to transport passengers and cargo safely and efficiently using innovative aircraft in the urban areas. It is expected to improve mobility for the general public, decongest road traffic, reduce transport time and reduce the strain on existing public transport networks. There exist several challenges to Urban Air Mobility (UAM) such as integration of procedures with airspace and the airport, noise levels that are acceptable to the general public, public safety, public acceptance, vehicle certification, and more. Most of the research in the United States and European skies (DLR - German Aerospace Center) related to urban areas has focused on small UAS (Unmanned Aircraft Systems) flights (NASA's UTM (UAS Traffic Management) research) and their integration with the airspace and building safe operations in densely populated areas. Previous studies on UAM have focused on fast time simulations of the routes that are separated via a separation service and network of routes. Similarly, research in Europe has focused on the approach profile for these innovative aircraft, vertiports and battery life among others. UAM as a part of the On-Demand Mobility effort has provided some guidelines for operations as shown below: Does not require additional ATC (Air Traffic Control) infrastructure; Does not impose additional workload on ATC; Does not restrict operations of traditional airspace users; Will meet appropriate safety thresholds and requirements; Will prioritize operational scalability; Will allow flexibility where possible and structure where necessary. This paper explores potential routes and procedures in a Human-In-The-Loop (HITL) experiment that could be applied in the near-term to allow integration of UAM flights into the airspace as well as a large airport. The airspace that was explored was Dallas Fort Worth (DFW) airspace managed by the DFW East Tower in South Flow only. In addition, Dallas Love Field (DAL) and Addison (ADS) airspace were also part of the testbed. The initial set of routes investigated in this study were published helicopter routes in the DFW area. Figure 1 shows class B airspace in DFW area and the origin/destination city pairs where UAM flights flew along with helicopter routes shown in blue. The research focused on exploring procedures for integrating UAM flights into Class Bravo and Class Delta airspace. Three different communication procedures, evaluated with three different levels of UAM traffic, are shown in Table 1. The current day routes were evaluated with current day communication procedures were explored as the first condition. The current day routes were also evaluated in the second condition with reduced communications, which was assumed due to the presence of a Letter Of Agreement (LOA). The purpose of the LOA was to reduce the verbiage associated with pilots getting clearance to Class B airspace from the controllers, pre-assigning beacons codes to the UAM flights, separate routes by assigning altitudes and speeds to flights going in any one direction. Flights were expected to automatically change frequency when exiting Class B airspace, thus transition points for entry and exit points were also specified in the LOA.

Urban Air Mobility↗
NASA NTRS2017

So You Want to Go to Mars: Bones and Matters of the Heart

There is evidence that weightlessness and radiation, two elements of the spaceflight environment, can lead to detrimental changes in human musculoskeletal tissue, including bone loss and muscle atrophy. This bone loss is thought to be brought about by the increased activity of bone-resorbing osteoclasts and functional changes in bone-forming osteoblasts, cells that give rise to mature osteocytes. Collectively, our research team aims to understand the molecular mechanisms underlying the responses of mammalian tissue to the spaceflight environment using earth-based animal and cellular models. The overarching goal is to identify molecular targets to prevent tissue decrements induced by spaceflight and earth-based scenarios of radiotherapy, accidental radiation exposure and reduced mobility. In this talk, I will provide an overview of skeletal and cardiovascular responses to spaceflight and will highlight our research progress on understanding the role of reactive oxygen species (ROS) signaling in skeletal responses to radiation and simulated weightlessness.

heart↗
NASA NTRS2012

SiGe Based Low Temperature Electronics for Lunar Surface Applications

The temperature at the permanently shadowed regions of the moon's surface is approximately -240 C. Other areas of the lunar surface experience temperatures that vary between 120 C and -180 C during the day and night respectively. To protect against the large temperature variations of the moon surface, traditional electronics used in lunar robotics systems are placed inside a thermally controlled housing which is bulky, consumes power and adds complexity to the integration and test. SiGe Based electronics have the capability to operate over wide temperature range like that of the lunar surface. Deploying low temperature SiGe electronics in a lander platform can minimize the need for the central thermal protection system and enable the development of a new generation of landers and mobility platforms with highly efficient distributed architecture. For the past five years a team consisting of NASA, university and industry researchers has been examining the low temperature and wide temperature characteristic of SiGe based transistors for developing electronics for wide temperature needs of NASA environments such as the Moon, Titan, Mars and Europa. This presentation reports on the status of the development of wide temperature SiGe based electronics for the landers and lunar surface mobility systems.

electonics↗
NASA NTRSDate not supplied

Missed Approach Procedures in Advanced Air Mobility: Conceptual Exploration

The High Density Vertiplex Sub-Project, as part of NASA’s Advanced Air Mobility (AAM) Project, has been in collaboration with a team from Wisk Aero focusing on vertiport operations, procedures, and concept development. A particular area of focus has been on the development of missed approach scenarios and procedures that highlight the potential changes in the nearer- and further-term operational time frames. Such changes relate to topic areas such as airspace design, automation and autonomy, roles and responsibilities of actors and stakeholders, airspace management services and systems, as well as technologies specific to vertiport operations management. This presentation encompasses the content of the associated paper that presents the current state of joint concept development through the established collaboration and the application of elements in ongoing testing as part of NASA’s High Density Vertiplex Sub-Project’s research strategy.

vertiport↗
NASA NTRS1973

Nuclear air cushion vehicles.

This paper serves several functions. It identifies the 'state-of-the-art' of the still-conceptual nuclear air cushion vehicle, particularly the nuclear powerplant. Using mission studies and cost estimates, the report describes some of the advantages of nuclear power for large air cushion vehicles. The paper also summarizes the technology studies on mobile nuclear powerplants and conceptual ACV systems/missions studies that have been performed at NASA Lewis Research Center.

Anderson, J. L.↗
NASA NTRS2002

622-Mbps Orthogonal Frequency Division Multiplexing (OFDM) Digital Modem Implemented

Future generation space communications systems feature significantly higher data rates and relatively smaller frequency spectrum allocations than systems currently deployed. This requires the application of bandwidth- and power-efficient signal transmission techniques. There are a number of approaches to implementing such techniques, including analog, digital, mixed-signal, single-channel, or multichannel systems. In general, the digital implementations offer more advantages; however, a fully digital implementation is very difficult because of the very high clock speeds required. Multichannel techniques are used to reduce the sampling rate. One such technique, multicarrier modulation, divides the data into a number of low-rate channels that are stacked in frequency. Orthogonal frequency division multiplexing (OFDM), a form of multicarrier modulation, is being proposed for numerous systems, including mobile wireless and digital subscriber link communication systems. In response to this challenge, NASA Glenn Research Center's Communication Technology Division has developed an OFDM digital modem (modulator and demodulator) with an aggregate information throughput of 622 Mbps. The basic OFDM waveform is constructed by dividing an incoming data stream into four channels, each using either 16- ary quadrature amplitude modulation (16-QAM) or 8-phase shift keying (8-PSK). An efficient implementation for an OFDM architecture is being achieved using the combination of a discrete Fourier transform (DFT) at the transmitter to digitally stack the individual carriers, inverse DFT at the receiver to perform the frequency translations, and a polyphase filter to facilitate the pulse shaping.

Kifle, Muli↗
NASA NTRS2020

A Quiet Helicopter for Air Taxi Operations

NASA is exploring rotorcraft designs for VTOL air taxi operations, also known as urban air mobility (UAM) or on-demand mobility (ODM) applications. Several concept vehicles have been developed, intended to focus and guide NASA research activities in support of aircraft development for this emerging market. This paper examines a single main-rotor helicopter designed specifically for low-noise air taxi operations. Based on demonstrated technology, the aircraft uses a turboshaft engine with a sound-absorbing installation, and the NOTAR anti-torque system to eliminate tail-rotor noise, consequently the noise and annoyance of the aircraft are dominated by the main rotor. Several design parameters are explored to reduce the noise, including rotor tip speed, blade geometry, and higher-harmonic control. Commensurate with the level of design detail, the noise is calculated for compact loading and thickness sources on the rotating blades. The metric is the reduction of the noise for the helicopter certification conditions (takeoff, flyover, and approach), relative a baseline aircraft with typical (high) tip speed, conventional blade planform, and no higher-harmonic control.

Johnson, Wayne↗
NASA NTRS2021

High-Density Automated Vertiport Concept of Operations

The National Aeronautics and Space Administration (NASA) vision for Advanced Air Mobility (AAM) includes Urban Air Mobility (UAM) – a concept involving vertical takeoff and landing (VTOL) aircraft, decentralized (or federated) traffic management, and new infrastructure to support urban, suburban, and rural flight operations. High-density performance-based routes or corridors enable prompt transportation of people and goods from node to node, where each node represents a vertiport, defined as an identifiable ground or elevated area used for the takeoff and landing of VTOL aircraft. In the presence of uncertainty surrounding aircraft turnaround time on the ground, vertiports are the critical end points in scheduling, sequencing, and spacing (SSS) of aircraft in dense metropolitan environments. This Concept of Operations (ConOps) includes vertiports of varying sizes, configurations, service offerings, and locations. UAM air vehicles include conventional rotorcraft, unmanned VTOL aircraft, and novel piloted VTOL aircraft. This ConOps focuses on operations at a high-density vertiport, supported by a Vertiport Automation System (VAS) with high-throughput operation capabilities under conditions defined as NASA’s Urban Air Mobility Maturity Level Four (UML-4).

UAM↗
NASA NTRSDate not supplied

Mass Inferencing Model Creation and Deployment to the RASSOR Lunar Excavation Robot

The Regolith Advanced Surface Systems Operations Robot (RASSOR) Excavator is a teleoperated mobile robotic platform with a unique space regolith excavation capability. The Intelligent Capabilities Enhanced RASSOR research project developed functionality for inferencing regolith mass ingested during RASSOR operation, enhancing RASSOR’s ability to successfully complete ISRU missions. To teleoperate or run autonomously, it is crucial for the quantity of regolith mass ingested by RASSOR to be available as a system state for efficient operation. For example, during autonomous operation, RASSOR should navigate and move to a processing plant to offload the collected regolith when the drums are full; without knowledge of how much mass is in the drums, this type of high-level planning is not possible. Four distinct modeling approaches were employed in developing a mass inferencing approach that could work on RASSOR. All take in system states, such as arm/drum positions, velocities, currents, voltages, and robot pose, and output a mass prediction for each set of the robot’s bucket drums.1) A neural network model that takes a vector of normalized system states; 2) A model that uses the integrated power consumption of an arm-raise (normalized by velocity); 3) A model that uses average drum current over a variable length interval of the drum disengaged from the surface; and 4) A real-time estimation model that aggregates excavation drum current. The developed models run in real time, outputting predictions for the front and rear drums, timestamp of the last prediction, and total mass in RASSOR’s drums. Further testing is required to validate the arm-raise model (2), though initial tests indicate reasonable performance (<10% mean error) on the hardware. The linear fit of average drum-current model (3) had a front value of r^2=0.99 and a rear value of r^2=0.98 on the validation dataset. This model currently has the best performance on unseen data. The real time model (4) is still in development, though initial results on a small subset of the training data show that it has high accuracy in predicting the increase in mass during excavation. Though work remains to be done with deploying a high-fidelity model to the physical system that makes predictions with error below the desired threshold, the modular architecture for model development allows quick adjustment of parameters to increase model fidelity. This architecture can also be adapted to use lunar excavation data to create models that are reflective of RASSOR’s dynamics when operating on the lunar surface. The results are promising as it has been shown that models can be developed that accurately estimate excavated regolith mass.

rassor↗
NASA NTRSDate not supplied

An in-Time Aviation Safety Management System Concept of Operations and Modernization of the National Airspace System

The National Airspace System (NAS) is growing in complexity of aircraft, missions, and operations. In response, many organizations have published papers and concepts of operations (ConOps) for new and enhanced safety systems. The National Academies’ vision for an In-time Aviation Safety Management System (IASMS) is integral to Federal Aviation Administration (FAA) modernization efforts. The National Aeronautics and Space Administration (NASA) System-Wide Safety (SWS) project is conducting safety research, exploring solutions, and defining the safety needs of future missions, such as Advanced Air Mobility (AAM) and autonomous aircraft operating in a more connected, flexible, and dynamic airspace. IASMS enables and provides a path for bringing FAA’s operational vision to fruition through increasingly automated safety systems that integrate services, functions, and capabilities (SFCs). These SFCs provide the necessary responsiveness to monitor, assess, and mitigate known hazards and emergent risks. This paper describes how safety in today’s air transportation system will need to evolve, identifies key points regarding in-time safety, and explores the criticality of IASMS in the future NAS.

IASMS↗
NASA NTRSDate not supplied

An In-time Aviation Safety Management System Concept of Operations and Modernization of the National Airspace System​

The National Airspace System (NAS) is growing in complexity of aircraft, missions, and operations. In response, many organizations have published papers and concepts of operations (ConOps) for new and enhanced safety systems. The National Academies’ vision for an In-time Aviation Safety Management System (IASMS) is integral to Federal Aviation Administration (FAA) modernization efforts. The National Aeronautics and Space Administration (NASA) System-Wide Safety (SWS) project is conducting safety research, exploring solutions, and defining the safety needs of future missions, such as Advanced Air Mobility (AAM) and autonomous aircraft operating in a more connected, flexible, and dynamic airspace. IASMS enables and provides a path for bringing FAA’s operational vision to fruition through increasingly automated safety systems that integrate services, functions, and capabilities (SFCs). These SFCs provide the necessary responsiveness to monitor, assess, and mitigate known hazards and emergent risks. This paper describes how safety in today’s air transportation system will need to evolve, identifies key points regarding in-time safety, and explores the criticality of IASMS in the future NAS.

Airspace↗
NASA NTRSDate not supplied

Advancing Electric Propulsion Aircraft Evaluation for Urban Air Mobility: Insights from NASA-Ames

This presentation delves into a recent evaluation conducted at NASA-Ames on the Vertical Motion Simulator, focusing on the handling qualities of Distributed Electric Propulsion VTOL (eVTOL) aircraft, specifically tailored for Urban Air Mobility (UAM) applications. The presentation will focus on the recent effort to adapt and refine use of the Aeronautical Design Standard -33 (ADS-33) rotorcraft handling qualities developed by the U.S. Army and NASA to meet the diverse needs of civilian (eVTOL) concept evaluation. A brief discussion of the author’s personal test pilot insights in the early development of military Fly-By-Wire evaluation methods will also be provided. The emergence of innovative eVTOL designs with unique lift capabilities and flight control systems, present both opportunities and challenges, particularly in ensuring safety amidst technological complexity. To navigate these challenges, our investigation examined evaluation criteria designed to accommodate the varied configurations and advanced automation systems inherent in modern eVTOL aircraft. By establishing a standardized approach to evaluation, our research not only fosters innovation but also upholds safety standards in the dynamic landscape of urban air mobility. Through this endeavor, we help to facilitate the seamless integration of novel aircraft capabilities into new operations, contributing to a new era of safe and efficient aerial transportation.

Loran Allen Haworth↗
NASA NTRSDate not supplied

Advancing Electric Propulsion Aircraft Evaluation for Urban Air Mobility: Insights from NASA Ames

This presentation delves into a recent evaluation conducted at NASA-Ames on the Vertical Motion Simulator, focusing on the handling qualities of Distributed Electric Propulsion VTOL (eVTOL) aircraft, specifically tailored for Urban Air Mobility (UAM) applications. The presentation will focus on the recent effort to adapt and refine use of the Aeronautical Design Standard -33 (ADS-33) rotorcraft handling qualities developed by the U.S. Army and NASA to meet the diverse needs of civilian (eVTOL) concept evaluation. A brief discussion of the author’s personal test pilot insights in the early development of military Fly-By-Wire evaluation methods will also be provided. The emergence of innovative eVTOL designs with unique lift capabilities and flight control systems, present both opportunities and challenges, particularly in ensuring safety amidst technological complexity. To navigate these challenges, our investigation examined evaluation criteria designed to accommodate the varied configurations and advanced automation systems inherent in modern eVTOL aircraft. By establishing a standardized approach to evaluation, our research not only fosters innovation but also upholds safety standards in the dynamic landscape of urban air mobility. Through this endeavor, we help to facilitate the seamless integration of novel aircraft capabilities into new operations, contributing to a new era of safe and efficient aerial transportation.

eVTOL↗
NASA NTRSDate not supplied

Requirement Discovery Using Embedded Knowledge Graph with ChatGPT

The field of Advanced Air Mobility (AAM) is witnessing a transformation with innovations such as electric aircraft and increasingly automated airspace operations. Within AAM, the Urban Air Mobility (UAM) concept focuses on providing air-taxi services in densely populated urban areas. This research introduces the utilization of Large Language Models (LLMs), such as OpenAI's GPT-4, to enhance the UAM Requirement discovery process. This study explores two distinct approaches to leverage LLMs in the context of UAM Requirement discovery. The first approach evaluates the LLM's ability to provide responses without relying on additional outside systems, such as a relational or graph database. Instead, a vector store provides relevant information to the LLM based on the user’s question, a process known as Retrieval Augmented Generation (RAG). The second approach integrates the LLM with a graph database. The LLM acts as an intermediary between the user and the graph database, translating user questions into cypher queries for the database and database responses into human-readable answers for the user. Our team implemented and tested both solutions to analyze requirements within a UAM dataset. This paper will talk about our approaches, implementations, and findings related to both approaches.

systems engineering↗