Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “maximum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

HDG-1 Graphite Preirradiation Data Package Report

This report documents all pre-irradiation examination material-property measurement data for graphite specimens that are going to be used within the first high dose graphite (HDG) -1 irradiation capsule. The two new HDG capsules signify a major change to the AGC Experiment. HDG-1 and HDG-2 will replace the last two Advanced Graphite Creep (AGC) capsules (AGC-5 and AGC-6) which were designed to irradiate graphite at the extreme upper operational temperatures for a very-high-temperature reactor (VHTR) design, 1100°C. These very high temperature AGC-5 and AGC-6 capsules have been repurposed to re-irradiated specimens (from AGC-2, AGC-3, and AGC-4) at the lower temperatures of 600°C and 800°C. HDG-1 will be irradiated at 600°C and HDG-2 will be irradiated at 800°C. By re-irradiating the previous AGC specimens a total maximum neutron dose of around 15 dpa (displacements per atom) can be achieved for all major graphite grades at irradiation temperatures of 600°C and 800°C. Specimens in the HDG-1 capsule are made up of previously irradiated specimens from the AGC-2 capsule and unirradiated specimens prepared for the now discontinued AGC-5 capsule. Utilizing the irradiated specimens, a maximum neutron dose of around 15 dpa is anticipated. These new maximum dose levels will provide irradiated material property data over a total neutron dose range of 1-15 dpa at a temperature of 600°C when combined with the previous AGC-1 and AGC-2 irradiation data. This will provide quantitative data necessary for predicting the irradiation behavior and operating performance of new nuclear graphite grades for use within high temperature reactor designs. Similar to previous AGC test trains, HDG-1 includes the major graphite grades (IG-110, NBG-17, NBG-18, PCEA, and 2114) as well as adding the very fine-grain grade IG-430 which is of interest to the Molten Salt Reactor (MSR) designs. Also new to the HDG-1 capsule are 90 smaller geometry specimens designated as pencil specimens. These specimens take up only one third the space of a standard creep size specimen. This increased number of specimens will enhance property measurement statistics because they will provide 3 times the control specimen data at a position that would otherwise only have a single measurement.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Heat Transfer Experiments of a 1st Stage Blade Cascade for Supercritical CO2 Oxy-Combustion Turbine Application

The results of internally cooled 1st stage blade (S1B) cascade testing in a supercritical CO2 environment is presented. The turbine blade design has been previously established for the end application of an oxy-combustion turbine operating in the Allam-Fetvedt cycle with turbine inlet conditions of 305 bar and 1150°C. The internally cooled blade features leading edge (LE) region impingement cooling, mid-section ribbed serpentine passages, and a pin-finned trailing edge (TE) region before cooling ejection holes. The geometry for the tested blade cascade has a cooled central blade with un-cooled blades on either side to match flowpath areas of the actual turbine. The flowpath reuses internal components previously employed for mid-section region ribbed serpentine passage experiments that established Nusselt number enhancement ratios over a range of Reynolds numbers from 100,000-400,000. New components include flow conditioning plates upstream and downstream of the blade cascade to adequately represent the flow field and blade external heat transfer coefficient profiles for the actual turbine. The cooled central blade utilizes uniform crystal temperature sensors (UCTS) with six sensors each on the blade pressure and suction surfaces distributed radially and from LE to TE. The post-processed UCTS quantified the maximum wall temperature seen at each installed sensor location. The test procedure consisted of establishing supercritical CO2 cooling flow temperature and flow rate and maintaining it throughout the test. The flow rate aims to match that for the actual in-service turbine blade design and is maintained through an orifice restriction to keep the pressure differential between internal cooling flow and external hot flow nearly constant. For the sCO2 flow path external to the blade, temperatures were ramped throughout the test via control of the test loop’s natural gas burner heater. The maximum temperature seen was 468°C and held constant for a duration of 10 minutes at which the blade metal temperature was predicted to be at its maximum before ramping down. For the turbine blade design for service inlet conditions, external flow path computational fluid dynamics (CFD) results and an internal cooling 1-D thermal and hydraulic flow network model using experimentally validated correlations served as thermal finite element (FE) boundary conditions to predict blade metal temperatures. These predicted temperatures were subsequently utilized in a structural FE model to predict blade life ratings dictated by Haynes 282 creep strength data, having a strong dependence on temperature. The boundary conditions experienced during testing are used in the same workflow and compared to the experimental results, with the goal of validating the analysis methodology and providing insight on the uncertainty in local metal temperature predictions.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Thermodynamic Modeling of Heat Engines Including Heat Transfer and Compression–Expansion Irreversibilities

In this paper, a thermodynamic model based on an endoreversible engine approach is developed to analyze the performance of heat engines operating under different thermodynamic cycles. The model considers finite heat transfer rate, variable heat source and sink temperatures, and irreversibilities associated with the expansion and compression. Expressions for the maximum power and efficiency at maximum power output are obtained as a function of hot and cold reservoir temperatures, the equivalent isentropic efficiency of compression and expansion components, and the effective conductance ratio between heat exchangers. In all cases, the Curzon–Ahlborn efficiency is retrieved at constant reservoir temperatures and neglected compression–expansion irreversibilities. The proposed model allows assessing the effect of isentropic efficiencies and heat exchanger design and operation characteristics for different thermodynamic cycles.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Decomposition Algorithms for Solving NP-hard Problems on a Quantum Annealer

NP-hard problems such as the maximum clique or minimum vertex cover problems, two of Karp’s 21 NP-hard problems, have several applications in computational chemistry, biochemistry and computer network security. Adiabatic quantum annealers can search for the optimum value of such NP-hard optimization problems, given the problem can be embedded on their hardware. However, this is often not possible due to certain limitations of the hardware connectivity structure of the annealer. This paper studies a general framework for a decomposition algorithm for NP-hard graph problems aiming to identify an optimal set of vertices. Our generic algorithm allows us to recursively divide an instance until the generated subproblems can be embedded on the quantum annealer hardware and subsequently solved. Furthermore, the framework is applied to the maximum clique and minimum vertex cover problems, and we propose several pruning and reduction techniques to speed up the recursive decomposition. The performance of both algorithms is assessed in a detailed simulation study.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Methodology to determine printability criteria of highly concentrated pastes through rheological characterization

Material extrusion is an additive manufacturing technique that enables the creation of reproducible and complex hardware by depositing a viscous, shear-thinning ink onto a substrate in a custom-pattern via extrusion through a syringe. Here, the ability of an ink to be extruded onto a substrate in many layers, and maintain the desired shape is what defines the printability. Printability is often investigated by formulating, printing, and postmortem analysis of final parts in an iterative manner. Investigations of printability through rheological characterization have often been concerned with inks that straddle the line between printable and too thin, leaving out an entire class of inks that are highly-filled pastes, where extrudability is the limiting factor. Highly-filled pastes continue to pose issues for researchers as the effect of filler morphology, size, loading, and packing fraction on the ink rheology and corresponding printability is not understood. While traditional rheological characterizations may be useful for some inks, we show that protocols utilizing steady-shear, or large-amplitude oscillatory shear are difficult and unreliable for highly-filled pastes. Through transient rheology paired with real-time images we show that each traditional protocol produces inhomogeneous deformations that violate the assumptions that underly common rheological definitions. Instead, we demonstrate metrics measured with small-amplitude oscillatory shear that are correlated to the printability of various ink formulations ranging in loading. The rheological measures that accurately predict the printability of the inks are the axial stress measured at small amplitudes, and the critical stress amplitude above which rheological characterizations become impossible. In addition, we estimate the maximum packing fraction for each filler, based on the exponent common to hard sphere models, and show that the printability of each ink can be predicted by the ratio of the packing fraction to the theoretical maximum. We show how small-amplitude oscillatory shear allows users to develop printability criteria for any ink to enhance the workflow in the development of new inks, increase the performance of material extrusion printing, and improve the stability of printed parts, with less wasted time and materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Parallel quantum annealing

Quantum annealers of D-Wave Systems, Inc., offer an efficient way to compute high quality solutions of NP-hard problems. This is done by mapping a problem onto the physical qubits of the quantum chip, from which a solution is obtained after quantum annealing. However, since the connectivity of the physical qubits on the chip is limited, a minor embedding of the problem structure onto the chip is required. In this process, and especially for smaller problems, many qubits will stay unused. We propose a novel method, called parallel quantum annealing, to make better use of available qubits, wherein either the same or several independent problems are solved in the same annealing cycle of a quantum annealer, assuming enough physical qubits are available to embed more than one problem. Although the individual solution quality may be slightly decreased when solving several problems in parallel (as opposed to solving each problem separately), we demonstrate that our method may give dramatic speed-ups in terms of the Time-To-Solution (TTS) metric for solving instances of the Maximum Clique problem when compared to solving each problem sequentially on the quantum annealer. Additionally, we show that solving a single Maximum Clique problem using parallel quantum annealing reduces the TTS significantly.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Performance measurement of emerging 3- and 4-terminal tandem solar cells

Tandem solar cells are not limited to the conventional two-terminal (2-T) configuration. Multi-terminal designs like three-terminal (3-T) and four-terminal (4-T) devices have gained increasing attention in the PV community due to their relaxed current-matching requirement between subcells and their potential for enhanced energy yield. However, reliable and standardized methods for evaluating the performance of multi-terminal tandems remain underdeveloped. This work addresses this gap by providing comprehensive measurement guidelines tailored to these advanced configurations. We examine key coupling mechanisms between subcells, including the shared electrical load in 3-T devices and optical luminescent coupling in both 3-T and 4-T devices, to enable accurate and consistent performance evaluation. Furthermore, we propose two stabilized measurement methods for emerging 3-T tandem cells incorporating perovskite subcells: (1) a two-dimensional maximum-power-point tracking (MPPT) approach that continuously tracks both subcells' maximum power points (P MAX ) until convergence to stabilized outputs, and (2) a hybrid approach that combines MPPT for one subcell with stabilized current recording under fixed voltage biases near the P MAX of the other, allowing robust extraction of the overall stabilized P MAX (termed “MPPT + asymptotic P MA X scan” method). These methods directly address the dynamic current responses inherent to perovskite-containing tandems, providing a foundation for meaningful and reproducible performance comparisons.

14 SOLAR ENERGY↗
DOE OSTI2021

Improved Gamma-Ray Point Source Quantification in Three Dimensions by Modeling Attenuation in the Scene

We discuss using a series of detector measurements taken at different locations to localize a source of radiation as a well-studied problem. The source of radiation is sometimes constrained to a single point-like source, in which case the location of the point source can be found using techniques such as maximum likelihood. Recent advancements have shown the ability to locate point sources in 2D and even 3D, but few have studied the effect of intervening material on the problem. In this work we examine gamma-ray data taken from a freely moving system and develop voxelized 3-D models of the scene using data from the onboard LiDAR. Ray casting is used to compute the distance each gamma ray travels through the scene material, which is then used to calculate attenuation assuming a single attenuation coefficient for solids within the geometry. Parameter estimation using maximum likelihood is performed to simultaneously find the attenuation coefficient, source activity, and source position that best match the data. Using a simulation, we validate the ability of this method to reconstruct the true location and activity of a source, along with the true attenuation coefficient of the structure it is inside, and then we apply the method to measured data with sources and find good agreement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Postfault Operation of Three-Level Inverter Driven Six-Phase PMSM With Enhanced Torque–Speed Region

This article presents an open-switch postfault operational technique with enhanced torque–speed region for three-level (3L) active neutral point clamped (ANPC) inverter-driven symmetrical six-phase (SSP) permanent magnet synchronous machines (PMSMs). Maximum torque (MT), minimum loss (ML), and single three-phase (STP) operations are commonly used for the postfault operations of six-phase drives. The maximum possible torque and speed in these operations are generally limited by voltage, current ratings, and the neutral point configuration of the motor. To enhance the postfault torque and speed operating region, the torque and speed limits in different postfault operational techniques are determined based on the voltage, current constraints, and neutral point configuration of the SSP-PMSM. In this work, a unified postfault operation is proposed that increases the postfault operational limits by combining MT, ML, and STP operations and modifying the neutral point configuration of the SSP-PMSM. In addition, a technique is also presented that modifies the pulsewidth modulation technique to enable full torque operation below 0.5 p.u. speed. The proposed postfault operational technique enables full-speed (1 p.u.) operation by operating in STP mode and full torque operation (1 p.u.) below 0.5 p.u. speed. Furthermore, the postfault operational technique is experimentally validated using a Gallium Nitride (GaN) device-based3L-ANPC inverter-driven SSP-PMSM.

42 ENGINEERING↗
DOE OSTI2024

Convergence Analysis for an Online Data-Driven Feedback Control Algorithm

This paper presents convergence analysis of a novel data-driven feedback control algorithm designed for generating online controls based on partial noisy observational data. The algorithm comprises a particle filter-enabled state estimation component, estimating the controlled system’s state via indirect observations, alongside an efficient stochastic maximum principle-type optimal control solver. By integrating weak convergence techniques for the particle filter with convergence analysis for the stochastic maximum principle control solver, we derive a weak convergence result for the optimization procedure in search of optimal data-driven feedback control. Numerical experiments are performed to validate the theoretical findings.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Acceleration of Crystallization Kinetics in Ge‐Sb‐Te‐Based Phase‐Change Materials by Substitution of Ge by Sn

Abstract Thin films of (Ge 1– x Sn x ) 8 Sb 2 Te 11 are prepared to study the impact of Sn‐substitution on properties relevant for application in phase‐change memory, a next‐generation electronic data storage technology. It is expected that substitution decreases the crystallization temperature, but it is not known how the maximum crystallization rate is affected. Ge 8 Sb 2 Te 11 is chosen from the (GeTe) y (Sb 2 Te 3 ) 1– y system of phase‐change materials as a starting point due to its higher crystallization temperature as compared to the common material Ge 2 Sb 2 Te 5 . In situ X‐ray diffraction at 5 K min −1 heating rate is performed to determine the crystallization temperature and the resulting structure. To measure the maximum crystallization rate, femtosecond optical pulses that heat the material repetitively and monitor the resulting increase of optical reflectance are used. Glasses over the entire composition range are prepared using a melt‐quenching process. While at x = 0, 97, subsequent pulses are required for crystallization, one single pulse is enough to achieve the same effect at x = 0.5. The samples are further characterized by optical ellipsometry and calorimetry. The combined electrical and optical contrast and the ability to cycle between states with single femtosecond pulses renders Ge 4 Sn 4 Sb 2 Te 11 promising for photonics applications.

Zalden, Peter↗
DOE OSTI2024

Improved Operational Stability of Blue Phosphorescent OLEDs by Functionalizing Phenyl‐Carbene Groups of Tetradentate Pt(II) Complexes

Abstract Stable and efficient deep‐blue organic light‐emitting diodes (OLEDs) are in high demand for display and lighting applications but are rarely reported due to their poor operational lifetimes. Herein, the study designs and synthesizes two novel N ‐heterocyclic carbene (NHC)‐based tetradentate Pt(II) complexes PtON5‐dtb and PtON5N‐dtb, and thoroughly investigate their electrochemical and photophysical properties. Functionalization of the NHC moieties can increase the metal‐to‐ligand charge transfer ( 1/3 MLCT) characters in their lowest triplet excited‐states, resulting in significantly shortened photoluminescent lifetimes and remarkably improved device performance. A deep blue OLED employing PtON5N‐dtb as an emitter exhibits a narrow spectral bandwidth with a full‐width at half maximum (FWHM) of 30 nm and a CIE y value of 0.17 and demonstrates a maximum external quantum efficiency (EQE) of 20.4% with a small efficiency roll‐off, which maintains a high EQE of 18.5% at 1000 cd m −2 . Moreover, the deep blue OLED also realizes a long‐measured operational lifetime LT 90 (time to 90% of the initial luminance) of 71 hours with an initial brightness of 1134 cd m −2 , corresponding to an estimated device lifetime LT 90 of 85 h at 1000 cd m −2 . This represented an eightfold lifetime improvement for PtON5N‐dtb‐based deep blue OLED compared to PtON7‐dtb in the same device setting.

Li, Guijie↗
DOE OSTI2024

Ink Casting and 3D‐Extrusion Printing of Yb 14 MnSb 11 for High‐Temperature Thermoelectric Material

Abstract Complex shapes are created from Yb 14 MnSb 11 , a high‐temperature thermoelectric Zintl phase, via a two‐step process: i) layer‐by‐layer 3D‐extrusion of ink containing partially‐reacted powders which are ball‐milled from a blend of Yb, MnSb, and Sb powders; ii) heat treatment to synthesize the ternary compound Yb 14 MnSb 11 and densify the extruded powders. A high phase purity for Yb 14 MnSb 11 (83–94%) is achieved in both cast and 3D‐extruded ink specimens via a solid‐state reaction between Yb, MnSb, and Yb 4 Sb 3 during reactive sintering. Pressure‐free sintering at temperatures of 1200–1400 °C densifies the powders to 82% relative density but can also induce the decomposition of the Yb 14 MnSb 11 phase due to Yb sublimation. A process window with optimized sintering temperature and time is identified, achieving both low porosity and high phase purity and reaching a maximum zT = 0.61 at 1000 °C, about half of the maximum zT value for bulk Yb 14 MnSb 11 made via conventional processes (pressure sintering of precursor powders). The present approach – direct ink writing of ball‐milled powders, combined with reactive sintering – is a scalable and affordable method to fabricate thermoelectric legs with intricate 3D shapes, for enhanced performances in high‐temperature thermoelectric applications.

Chen, Ming [Department of Materials Science &amp, ↗
DOE OSTI2024

Giant Apparent Optical Circular Dichroism in Thin Films of Bismuth-Based Hybrid Organic-Inorganic Metal Halide Semiconductor Through Preferred Orientation

Introducing chirality into organic/inorganic hybrid materials can impart chiroptical properties such as circular dichroism. The ability to tune chiroptical properties in self-assembled materials can have important implications for spintronic and optoelectronic applications. Here, a chiral organic cation, (R/S)-4-methoxy-a-methylbenzylammonium, is incorporated to synthesize the bismuth-based hybrid organic-inorganic metal halide semiconductor, (R/S-MeOMePMA)BiI4. Thin films of this Bi-based compound demonstrate large chiroptical responses, with circular dichroism anisotropy (gCD) values up to ˜0.1, close to the highest value observed in another chiral metal-halide semiconductor, (R-MBA2CuCl4). Detailed investigation reveals that this large gCD in (R/S-MeOMePMA)BiI4 is caused by the apparent CD effect. Careful selection of deposition conditions and the concomitant thin-film orientation enables the control of gCD, with maximum value observed when its thin film has a well-crystallized preferred (001) orientation parallel to the substrate. The results support a growing body of evidence that low symmetry plays an important role in achieving unusually large gCD in these chiral metal-halide materials and provides design rules for achieving large chiroptical response via morphology control.

chiroptic response↗
DOE OSTI2024

Birefringent Color Filter by Layered Metal‐Organic Chalcogenides: In‐Plane Anisotropy and Odd/Even Effect

Anisotropic 2D materials are gaining interest recently as building blocks for angular‐dependent optical/electrical devices. However, the fundamental understanding of their structure‐property‐relationship is limited, which hinders further modulation of their unique characteristics via structure tailoring. Here the in‐plane structural anisotropy and the tunable optical/electrical properties of a series of radiation‐sensitive (X‐ray, e‐beam) metal‐organic chalcogenide (MOC) single crystals are comprehensively revealed with ligands of variable length/parity. Their monoclinic crystallography is determined at atomic resolution by a simple method that couples X‐ray/electron diffraction with first‐principles calculations. The in‐plane inorganic backbone of the MOCs exhibits a strong lattice anisotropy with odd/even alternations, which originates from that of the out‐of‐plane organic motifs via organic/inorganic accommodation. Such structural anisotropy is implied mechanically by the preferred orientation of crystal cleavage. It triggers a maximum ≈8 × distinction of in‐plane electrical conductivity of the semiconducting MOCs, plus a distinct birefringence (maximum Δn ≈ 0.03) with a dispersive orientation of dielectric axes, which rotate up to 25.7° from UV to visible‐light regime, inspiring an emerging pathway for color filtering via single crystal rotation. Such in‐plane optical characteristics also exhibit odd/even alternation and can be flexibly tuned by the designable out‐of‐plane ligands.

birefringence↗
DOE OSTI2025

Interactions Enhance Ramp Reversal Memory in Locally Phase Separated Materials

The ramp-reversal memory (RRM) effect in metal–insulator transition metal oxides (TMOs), a non-volatile resistance change induced by repeated temperature cycling, has attracted considerable interest in neuromorphic computing and non-volatile memory devices. Our previous defect motion model successfully explained RRM in vanadium dioxide (VO 2 ), capturing observed critical temperature shifts and memory accumulation throughout the sample. However, this approach lacked interactions between metallic and insulating domains. Here, we extend our model by combining a correlated Random Field Ising Model with defect diffusion-segregation, enabling accurate hysteresis modeling while predicting the relationship between RRM and domain interactions. Our simulations demonstrate that the maximum RRM occurs when the turnaround temperature approaches the inflection point. This peak in RRM vs. turnaround temperature is consistent with prior transport measurements, as well as our own optical measurements reported here. Significantly, we find that increasing nearest-neighbor interactions enhances the maximum memory effect, thus providing a clear mechanism for optimizing RRM performance. Since our model employs minimal assumptions, we predict that RRM should be a widespread phenomenon in materials exhibiting patterned phase coexistence of electronic domains. This work not only advances fundamental understanding of memory behavior in TMOs but also establishes a much-needed theoretical framework for optimizing device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Influence of Intracrystalline Ionic Strength in MFI Zeolites on Aqueous Phase Dehydration of Methylcyclohexanols

Abstract The impact of the concentration of hydrated hydronium ions and in turn of the local ionic strength in MFI zeolites has been investigated for the aqueous phase dehydration of 4‐methylcyclohexanol (E1 mechanism) and cis ‐2‐methylcyclohexanol (E2 mechanism). The E2 pathway with the latter alcohol led to a 2.5‐fold higher activity. The catalytic activity normalized to the hydronium ions (turnover frequency, TOF) passed through a pronounced maximum, which is attributed to the increasing excess chemical potential of the alcohols in the pores, increasing in parallel with the ionic strength and the additional work caused by repulsive interactions and charge separation induced by the bulky alcohols. While the maximum in rate observed is invariant with the mechanism or substitution, the reaction pathway is influencing the activation parameters differently.

Milaković, Lara↗