Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Equivalence of light-front and covariant approaches in meson-baryon interactions

We demonstrate the equivalence of the light-front, equal-time and covariant formulations in meson-baryon interactions. In particular, we discuss the self-energy {Sigma} of a nucleon dressed by pion loops with the pseudovector {pi}NN coupling. It is shown that the leading nonanalytic behavior of {Sigma} is equivalent whichever formulations are used for the derivation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Is it viable to improve light output efficiency by nano-light-emitting diodes?

Nanopillar arrays with InGaN/GaN multiple-quantum-disks (MQDs) are fabricated by focused-ion-beam milling with surface damage layer removed by KOH wet etching. Nano-light-emitting diodes (Nano-LEDs) made of the InGaN/GaN MQD nanopillars are found to have 19.49% less output power than that of a conventional LED. The reasons are analyzed in detail and considering their current-voltage and electroluminescence characteristics, internal quantum efficiency, external quantum efficiency, light extraction, and wall-plug efficiency. Our results suggest that nanopillar-LED can outperform if the density can be increased to 2.81 × 10{sup 9} cm{sup −2} with the size unchanged or the size can be increased to 854.4 nm with the density unchanged.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A micrometer-size movable light emitting area in a resonant tunneling light emitting diode

We report on the fabrication of a micrometer-size movable light emitting area in a GaAs/AlAs quantum well resonant tunneling p-i-n diode. The spatial position of the micrometer-size light emitting area shifts linearly with increasing applied bias, up to 30 μm for a bias increment of 0.2 V. Also, the simultaneous resonant tunneling injection of both electrons and holes into the quantum well states is achieved at specific positions of the diode, thus resulting in a tenfold increase of the electroluminescence intensity.

36 MATERIALS SCIENCE↗

Visible-light electroluminescence in Mn-doped GaAs light-emitting diodes

We observed visible-light electroluminescence (EL) due to d-d transitions in light-emitting diodes with Mn-doped GaAs layers (here, referred to as GaAs:Mn). Besides the band-gap emission of GaAs, the EL spectra show two peaks at 1.89 eV and 2.16 eV, which are exactly the same as {sup 4}A{sub 2}({sup 4}F) → {sup 4}T{sub 1}({sup 4}G) and {sup 4}T{sub 1}({sup 4}G) → {sup 6}A{sub 1}({sup 6}S) transitions of Mn atoms doped in ZnS. The temperature dependence and the current-density dependence are consistent with the characteristics of d-d transitions. We explain the observed EL spectra by the p-d hybridized orbitals of the Mn d electrons in GaAs.

36 MATERIALS SCIENCE↗

Nano-honeycomb structured transparent electrode for enhanced light extraction from organic light-emitting diodes

A universal nano-sphere lithography method has been developed to fabricate nano-structured transparent electrode, such as indium tin oxide (ITO), for light extraction from organic light-emitting diodes (OLEDs). Perforated SiO{sub 2} film made from a monolayer colloidal crystal of polystyrene spheres and tetraethyl orthosilicate sol-gel is used as a template. Ordered nano-honeycomb pits on the ITO electrode surface are obtained by chemical etching. The proposed method can be utilized to form large-area nano-structured ITO electrode. More than two folds' enhancement in both current efficiency and power efficiency has been achieved in a red phosphorescent OLED which was fabricated on the nano-structured ITO substrate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tenth-order lepton g-2: Contribution of some fourth-order radiative corrections to the sixth-order g-2 containing light-by-light-scattering subdiagrams

This paper reports the tenth-order QED contribution to lepton g-2 from diagrams of three gauge-invariant sets VI(d), VI(g), and VI(h), which are obtained by including various fourth-order radiative corrections to the sixth-order g-2 containing light-by-light-scattering subdiagrams. In the case of electron g-2, they consist of 492, 480, and 630 vertex Feynman diagrams, respectively. The results of numerical integration, including mass-dependent terms containing muon loops, are 1.8480 (69) ({alpha}/{pi}){sup 5} for the Set VI(d), -1.5909 (62) ({alpha}/{pi}){sup 5} for the Set VI(g), and 0.1793 (39) ({alpha}/{pi}){sup 5} for the Set VI(h), respectively. We also report the contributions to the muon g-2, which derive from diagrams containing an electron, muon or tau-lepton loop: Their sums are -5.990 (591) ({alpha}/{pi}){sup 5} for the Set VI(d), 5.323 (472) ({alpha}/{pi}){sup 5} for the Set VI(g), and -8.362 (232) ({alpha}/{pi}){sup 5} for the Set VI(h), respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hadronic light by light contribution to the (g-2){sub {mu}} with holographic models of QCD

We study the anomalous electromagnetic pion form factor F{sub {pi}}{sup 0}{sub {gamma}}{sup *}{sub {gamma}}{sup *} with a set of holographic models. By comparing with the measured value of the linear slope, some of these models can be ruled out. From the remaining models, we obtain predictions for the low-energy quadratic slope parameters of F{sub {pi}}{sup 0}{sub {gamma}}{sup *}{sub {gamma}}{sup *}, currently out of experimental reach but testable in the near future. We find it particularly useful to encode this low-energy information in a form factor able to satisfy also QCD short-distance constraints. We choose the form factor introduced by D'Ambrosio, Isidori, and Portoles in kaon decays, which has the right short distance for a particular value of the quadratic slope, which is later shown to be compatible with our holographic predictions. We then turn to a determination of the (dominant) pion exchange diagram in the hadronic light by light scattering contribution to the muon anomalous magnetic moment. We quantify the theoretical uncertainty in (g-2){sub {mu}} coming from the different input we use: QCD short distances, experimental input, and low-energy holographic predictions. We also test the pion-pole approximation. Our final result is a{sub {mu}}{sup {pi}0}=6.54(25)x10{sup -10}, where the error is driven by the linear slope of F{sub {pi}}{sup 0}{sub {gamma}}{sup *}{sub {gamma}}{sup *}, soon to be measured with precision at KLOE-2. Our numerical analysis also indicates that large values of the magnetic susceptibility {chi}{sub 0} are disfavored, therefore pointing at a mild effect from the pion off-shellness. However, in the absence of stronger bounds on {chi}{sub 0}, an additional (10-15)% systematic uncertainty on the previous value for a{sub {mu}}{sup {pi}0} cannot be excluded.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Soft holographic interference lithography microlens for enhanced organic light emitting diode light extraction

Very uniform 2 {micro}m-pitch square microlens arrays ({micro}LAs), embossed on the blank glass side of an indium-tin-oxide (ITO)-coated 1.1 mm-thick glass, are used to enhance light extraction from organic light-emitting diodes (OLEDs) by {approx}100%, significantly higher than enhancements reported previously. The array design and size relative to the OLED pixel size appear to be responsible for this enhancement. The arrays are fabricated by very economical soft lithography imprinting of a polydimethylsiloxane (PDMS) mold (itself obtained from a Ni master stamp that is generated from holographic interference lithography of a photoresist) on a UV-curable polyurethane drop placed on the glass. Green and blue OLEDs are then fabricated on the ITO to complete the device. When the {mu}LA is {approx}15 x 15 mm{sup 2}, i.e., much larger than the {approx}3 x 3 mm{sup 2} OLED pixel, the electroluminescence (EL) in the forward direction is enhanced by {approx}100%. Similarly, a 19 x 25 mm{sup 2} {mu}LA enhances the EL extracted from a 3 x 3 array of 2 x 2 mm{sup 2} OLED pixels by 96%. Simulations that include the effects of absorption in the organic and ITO layers are in accordance with the experimental results and indicate that a thinner 0.7 mm thick glass would yield a {approx}140% enhancement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Municipal Solid-State Street Lighting Consortium Public Outdoor Lighting Inventory: Phase I: Survey Results

This document presents the results of a voluntary web-based inventory survey of public street and area lighting across the U.S. undertaken during the latter half of 2013.This survey attempts to access information about the national inventory in a “bottoms-up” manner, going directly to owners and operators. Adding to previous “top down” estimates, it is intended to improve understanding of the role of public outdoor lighting in national energy use.

National street lighting inventory↗

GATEWAY Demonstrations: Tuning Hospital Lighting: Evaluating Tunable LED Lighting at the Swedish Hospital Behavioral Health Unit in Seattle

The GATEWAY program evaluated a tunable LED lighting system installed in the new Swedish Medical Behavioral Health Unit in Seattle that incorporates color-tunable luminaires in common areas, and uses advanced controls for dimming and color tuning, with the goal of providing a better environment for staff and patients. The report reviews the design of the tunable lighting system, summarizes two sets of measurements, and discusses the circadian, energy, and commissioning implications as well as lessons learned from the project.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Growth and photomorphogenesis of pepper plants under red light-emitting diodes with supplemental blue or far-red lighting

Light-emitting diodes (LEDs) are a potential irradiation source for intensive plant culture systems and photobiological research. They have small size, low mass, a long functional life, and narrow spectral output. In this study, we measured the growth and dry matter partitioning of 'Hungarian Wax' pepper (Capsicum annuum L.) plants grown under red LEDs compared with similar plants grown under red LEDs with supplemental blue or far-red radiation or under broad spectrum metal halide (MH) lamps. Additionally, we describe the thermal and spectral characteristics of these sources. The LEDs used in this study had a narrow bandwidth at half peak height (25 nm) and a focused maximum spectral output at 660 nm for the red and 735 nm for the far-red. Near infrared radiation (800 to 3000 nm) was below detection and thermal infrared radiation (3000 to 50,000 nm) was lower in the LEDs compared to the MH source. Although the red to far-red ratio varied considerably, the calculated phytochrome photostationary state (phi) was only slightly different between the radiation sources. Plant biomass was reduced when peppers were grown under red LEDs in the absence of blue wavelengths compared to plants grown under supplemental blue fluorescent lamps or MH lamps. The addition of far-red radiation resulted in taller plants with greater stem mass than red LEDs alone. There were fewer leaves under red or red plus far-red radiation than with lamps producing blue wavelengths. These results indicate that red LEDs may be suitable, in proper combination with other wavelengths of light, for the culture of plants in tightly controlled environments such as space-based plant culture systems.

NASA Discipline Life Support Systems↗

Using X-ray Light to Study Solar Materials at the Advanced Light Source

Shambhavi Pratap, ALS Doctoral Fellow in Residence and a Doctoral Researcher at the Technical University of Munich, will discuss how she studies thin-film solar energy materials using X-rays at the ALS. The Advanced Light Source is a DOE Office of Science User Facility. The International Day of Light is recognized by the United Nations Educational, Scientific and Cultural Organization (UNESCO).

14 SOLAR ENERGY↗