Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lifetime model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

High Energy Flywheel Containment Evaluation

A flywheel testing facility is being constructed at the NASA Glenn Research Center. This facility is to be used for life cycle testing of various flywheel rotors. The lifecycle testing consists of spinning a rotor from a low rpm (approx. 20,000 ) to a high rpm (approx. 60,000) and then back to the low rpm. This spin cycle will model that which the rotor will see during use. To simulate the lifetime of the rotor, the spin cycle will be performed tens of thousands of times. A typical life cycle spin test is expected to last six months. During this time the rotor will be spun through a cycle every five minutes. The test will run continuously for the six month period barring a flywheel failure. Since it is not reasonable to have the surrounding area evacuated of personnel for the duration of the testing, the flywheel facility has to be designed to withstand a flywheel rotor failure and insure that there is no danger to any personnel in the adjacent buildings or surrounding areas. In order to determine if the facility can safely contain a flywheel rotor failure an analysis of the facility in conjunction with possible flywheel failure modes was performed. This analysis is intended as a worst case evaluation of the burst liner and vacuum tank's ability to contain a failure. The test chamber consists of a cylindrical stainless steel vacuum tank, two outer steel containment rings, and a stainless steel burst liner. The stainless steel used is annealed 302, which has an ultimate strength of 620 MPa (90,000 psi). A diagram of the vacuum tank configuration is shown. The vacuum tank and air turbine will be located below ground in a pit. The tank is secured in the pit with 0.3 m (12 in.) of cement along the base and the remaining portion of the tank is surrounded by gravel up to the access ports. A 590 kg (1300 lb.) bulkhead is placed on top of the pit during operation and the complete facility is housed within a concrete structure which has 7.5 cm (3 in.) thick walls. A cutaway of the facility is shown.

Colozza, Anthony J.↗
NASA NTRS2000

The Radiative Effects of Martian Water Ice Clouds on the Local Atmospheric Temperature Profile

Mars Pathfinder made numerous discoveries, one of which was a deep temperature inversion that extended from about 15 km down to 8 km above the surface. It has been suggested by Haberle et al. (1999. J. Geophys. Res. 104, 8957-8974.) that radiative cooling by a water ice cloud may generate such an inversion. Clouds can strongly affect the local air temperature due to their ability to radiate efficiently in the infrared and due to the low air mass of the martian atmosphere, which allows the temperature to change during the relatively short lifetime of a cloud. We utilize a time-dependent microphysical aerosol model coupled to a radiative--convective model to explore the effects water ice clouds have on the local martian temperature profile. We constrain the dust and water vapor abundance using data from the Viking Missions and Mars Pathfinder. Water t ice clouds with visible optical depths of r > 0.1 form readily in these simulations. These clouds alter the local air temperature directly, through infrared cooling, and indirectly, by redistributing atmospheric dust. With this model we are able to reproduce the temperature inversions observed by Mars Pathfinder and Mars Global t Surveyor 2000 Academic Press

Colaprete, Anthony↗
NASA NTRS2003

CFD Code Development for Combustor Flows

During the lifetime of this grant, work has been performed in the areas of model development, code development, code validation and code application. For model development, this has included the PDF combustion module, chemical kinetics based on thermodynamics, neural network storage of chemical kinetics, ILDM chemical kinetics and assumed PDF work. Many of these models were then implemented in the code, and in addition many improvements were made to the code, including the addition of new chemistry integrators, property evaluation schemes, new chemistry models and turbulence-chemistry interaction methodology. Validation of all new models and code improvements were also performed, while application of the code to the ZCET program and also the NPSS GEW combustor program were also performed. Several important items remain under development, including the NOx post processing, assumed PDF model development and chemical kinetic development. It is expected that this work will continue under the new grant.

Norris, Andrew↗
NASA NTRS2011

Proximity Effects and Nonequilibrium Superconductivity in Transition-Edge Sensors

We have recently shown that normal-metal/superconductor (N/S) bilayer TESs (superconducting Transition-Edge Sensors) exhibit weak-link behavior.l Here we extend our understanding to include TESs with added noise-mitigating normal-metal structures (N structures). We find TESs with added Au structures also exhibit weak-link behavior as evidenced by exponential temperature dependence of the critical current and Josephson-like oscillations of the critical current with applied magnetic field. We explain our results in terms of an effect converse to the longitudinal proximity effect (LoPE) 1, the lateral inverse proximity effect (LaiPE), for which the order parameter in the N/S bilayer is reduced due to the neighboring N structures. Resistance and critical current measurements are presented as a function of temperature and magnetic field taken on square Mol Au bilayer TESs with lengths ranging from 8 to 130 {\mu}m with and without added N structures. We observe the inverse proximity effect on the bilayer over in-plane distances many tens of microns and find the transition shifts to lower temperatures scale approximately as the inverse square of the in- plane N-structure separation distance, without appreciable broadening of the transition width. We also present evidence for nonequilbrium superconductivity and estimate a quasiparticle lifetime of 1.8 \times 10-10 s for the bilayer. The LoPE model is also used to explain the increased conductivity at temperatures above the bilayer's steep resistive transition.

Sadleir, John E.↗
NASA NTRS2018

Hollow Cathode Thermal Modelling and Self-Consistent Plasma Solution: Work Function Evaluation for a LaB6 Cathode.

Self-heating hollow cathodes are central components in modern electric thrusters. The plasma discharge inside these devices heats the internal components, thus maintaining the temperatures required for electron emission. Precise knowledge of the physical phenomena governing hollow cathode operation is key to predict their lifetime, specifically, their thermionic emission characteristics. A simulation platform has been built to couple plasma and thermal models of the self-heating hollow cathode to produce a self-consistent solution. A self-consistent solution has been found for a LaB6 hollow cathode operating at 25A and 13 sccm where the work function is assumed to be spatially uniform along the emitter with a value which is allowed to vary as the coupled model iterates to a self-consistent solution. The emitter temperature from the converged solution does not agree with experimental temperature measurements, however. The results of a sensitivity analysis suggest that none of the tolerances in the measurement are responsible for the discrepancy. We hypothesize that either the work function needs to be a function of position along the emitting surfaces or the heat fluxes have been overestimated in the plasma solver.

Meiron, Daniel I.↗
NASA NTRS1989

Modelling ionospheric density structures

Large-scale density structures are a common feature in the high-latitude ionsphere. The structures were observed in the dayside cusp, polar cap, and nocturnal auroral region over a range of altitudes, including the E-region, F-region and topside ionosphere. The origins, lifetimes and transport characteristics of large-scale density structures were studied with the aid of a three-dimensional, time-dependent ionospheric model. Blob creation due to particle precipitation, the effect that structured electric fields have on the ionosphere, and the lifetimes and transport characteristics of density structures for different seasonal, solar cycle, and interplanetary magnetic field (IMF) conditions were studied. The main conclusions drawn are: (1) the observed precipitation energy fluxes are sufficient for blob creation if the plasma is exposed to the precipitation for 5 to 10 minutes; (2) structured electric fields produce structured electron densities, ion temperatures, and ion composition; (3) the lifetime of an F-region density structure depends on several factors, including the initial location where it was formed, the magnitude of the perturbation, season, solar cycle and IMF; and (4) depending on the IMF, horizontal plasma convection can cause an initial structure to break up into multiple structures of various sizes, remain as a single distorted structure, or become stretched into elongated segments.

Schunk, R. W.↗
NASA NTRS2010

Longitudinal Proximity Effect, Lateral Inverse Proximity Effect, and Nonequilibrium Superconductivity in Transition-edge Sensors

We have recently shown that normal-metal/superconductor (N/S) bilayer TESs (superconducting Transition-Edge Sensors) exhibit weak-link behavior. Our measurements were explained in terms of a longitudinal proximity effect model in which superconducting order from the higher transition temperature leads is induced into the TES bilayer plane over remarkably long distances (up to 290 micron). Here we extend our understanding to include TESs with added noise-mitigating normal-metal structures (N structures). We explain our results of an effect converse to the longitudinal proximity effect (LoPE), the lateral inverse proximity effect (LaiPE), for which the order parameter in the N/S bilayer is reduced due to the neighboring N structures. We present resistance and critical current measurements as a function of temperature and magnetic field taken on square Mo/Au bilayer TESs with lengths ranging from 8 to 130 micron with and without added N structures. We observe the inverse proximity effect on the bilayer over in-plane distances many tens of microns and find the transition shifts to lower temperature scale approximately as the inverse square of the in-plane N-structure separation distance, without appreciable broadening of the transition width. We find TESs with added Au structures exhibit weak-link behavior as evidenced by exponential temperature dependence of the critical current and Josephson-like oscillations of the critical current with applied magnetic field. We also present evidence for nonequilbrium superconductivity and estimate a quasiparticle lifetime of 1.8 x 10(exp -10) s for the bilayer. The LoPE model is also used to explain the increased conductivity at temperatures above the bilayer's steep resistive transition

Sadleir, John E.↗
NASA NTRS2010

Longitudinal Proximity Effect, Lateral Inverse Proximity Effect, and Nonequilibrium Superconductivity in Transition-Edge Sensors

We have recently shown that normal-metal/superconductor (N /S) bilayer TESs (superconducting Transition-Edge Sensors) exhibit weak-link behavior. Our measurements were explained in terms of a longitudinal proximity effect model in which superconducting order from the higher transition temperature leads is induced into the TES bilayer plane over remarkably long distances (up to 290 micron). Here we extend our understanding to include TESs with added noise-mitigating normal-metal structures (N structures). We explain our results in terms of an effect converse to the longitudinal proximity effect (LoPE), the lateral inverse proximity effect (LaiPE), for which the order parameter in the N /S bilayer is reduced due to the neighboring N structures. We present resistance and critical current measurements as a function of temperature and magnetic field taken on square Mo/Au bilayer TESs with lengths ranging from 8 to 130 micron with and without added N structures. We observe the inverse proximity effect on the bilayer over in-plane distances many tens of microns and find the transition shifts to lower temperatures scale approximately as the inverse square of the in-plane N-structure separation distance, without appreciable broadening of the transition width. We find TESs with added Au structures exhibit weak-link behavior as evidenced by exponential temperature dependence of the critical current and Josephson-like oscillations of the critical current with applied magnetic field. We also present evidence for nonequilbrium superconductivity and estimate a quasiparticle lifetime of 1.8 x 10(exp -10) s for the bilayer. The LoPE model is also used to explain the increased conductivity at temperatures above the bilayer's steep resistive transition.

Sadleir, John E.↗
NASA NTRS1962

Study of a Proposed Infrared Horizon Scanner for Use in Space-Orientation Control Systems

An attitude-sensing device for space vehicles which detects the thermal radiation discontinuity at opposite horizons of a planetary body to produce an attitude error signal is described. The planetary body may be the Earth, its Moon, Mars, or Venus. The sensor is expected to have an accuracy of 0.25 degrees for the Earth, a long continuous operating lifetime, a wide altitude range, a wide capture capability, and an inherent ability to produce signals indicating vehicle altitude. An experimental model incorporating many of the features of the proposed sensor indicates that the proposed sensor will be low in weight, volume, and power consumption. The sensor's altitude range, accuracy, lifetime, and sensitivity to radiation from the Moon and planets are discussed.

INFRARED HORIZON SCANNER↗
NASA NTRS1980

Skylab orbital lifetime prediction and decay analysis

A record (from preflight planning to earth impact) of skylab's orbital lifetime predictions, its actual decay and analysis are presented. Skylab provided a unique opportunity to develop, confirm and check out procedures and computer programs used for predicting lifetime and reentry. It provided verification of aerodynamic environment which was predicted for several aerodynamic configurations. It also provided data on the density model's reaction to rapidly changing solar flux over relatively short time periods. The effects of solar flux (and the uncertainty in the solar flux predictions) on orbital lifetime are discussed.

Dreher, P. E.↗
NASA NTRS2016

Multiparameter Flowfield Measurements in High-Pressure, Cryogenic Environments Using Femtosecond Lasers

Femtosecond laser electronic excitation tagging (FLEET) and Rayleigh scattering (RS) from a femtosecond laser are demonstrated in the NASA Langley 0.3-m Transonic Cryogenic Tunnel (TCT). The measured signals from these techniques are examined for their thermodynamic dependencies in pure nitrogen. The FLEET signal intensity and signal lifetimes are found to scale primarily with the gas density, as does the RS signal. Several models are developed, which capture these physical behaviors. Notably, the FLEET and Rayleigh scattering intensities scale linearly with the flow density, while the FLEET signal decay rates are a more complex function of the thermodynamic state of the gas. The measurement of various flow properties are demonstrated using these techniques. While density was directly measured from the signal intensities and FLEET signal lifetime, temperature and pressure were measured using the simultaneous FLEET velocity measurements while assuming the flow had a constant total enthalpy. Measurements of density, temperature, and pressure from the FLEET signal are made with accuracies as high as 5.3 percent, 0.62 percent, and 6.2 percent, respectively, while precisions were approximately 10 percent, 0.26 percent, and 11 percent for these same quantities. Similar measurements of density from Rayleigh scattering showed an overall accuracy of 3.5 percent and a precision of 10.2 percent over a limited temperature range (T greater than 195 K). These measurements suggest a high degree of utility at using the femtosecond-laser based diagnostics for making multiparameter measurements in high-pressure, cryogenic environments such as large-scale TCT facilities.

Burns, Ross A.↗
NASA NTRS2013

Cirrus Cloud Seeding has Potential to Cool Climate

Cirrus clouds, thin ice clouds in the upper troposphere, have a net warming effect on Earth s climate. Consequently, a reduction in cirrus cloud amount or optical thickness would cool the climate. Recent research indicates that by seeding cirrus clouds with particles that promote ice nucleation, their lifetimes and coverage could be reduced. We have tested this hypothesis in a global climate model with a state-of-the-art representation of cirrus clouds and find that cirrus cloud seeding has the potential to cancel the entire warming caused by human activity from pre-industrial times to present day. However, the desired effect is only obtained for seeding particle concentrations that lie within an optimal range. With lower than optimal particle concentrations, a seeding exercise would have no effect. Moreover, a higher than optimal concentration results in an over-seeding that could have the deleterious effect of prolonging cirrus lifetime and contributing to global warming.

Storelvmo, T.↗
NASA NTRS2003

Modeling the Extended Neutral Atmosphere and Plasma Environment near Saturn

In the three years of this study we have published five papers in refereed journals. We have first examined satellite sources and their contribution to the observed neutral cloud. Based on the total calculated satellite sources and the spatial distribution of sputtered H20, we concluded that they cannot produce observed OH cloud. The E-ring contribution has been also studied in detail.In order to produce observed OH cloud we suggested that the E-ring might be the dominant source in inner Saturnian magnetosphere. We proposed a possible resupply mechanism which is needed to keep both E-ring and OH cloud in the present state: collisions between E-ring grains and remains of a disrupted satellite near Enceladus Lagrangian points. In this scenario a large amount of material, ranging from a few micrometers to hundred of meters, which is optically invisible at present, is likely to exist there. The fourth paper compares the magnetosheaths of the outer planets. A surprising result is that the hot proton component comprises about 40% of the total density, much larger than predicted by shock theory. Gas dynamic models of the boundaries show that the magnetospheres of Jupiter and Saturn are flattened at the poles. The last paper was published in GRL and is the first based of the model of neutrals developed as a main goal of this grant and which is now operational.This Monte Carlo collision code self- consistently determines the neutral distribution. from the rings and satellites until they are lost by ionization, by collisions with rings, moons, or Saturn, or by escape from Saturn. Our model is unique in that it includes the effects of plasma chemistry and both plasma-neutral and neutral neutral collisions to determine the dynamical evolution of the water group neutrals in Saturn's magnetosphere. The lifetimes of the neutrals against loss to photoionization, charge exchange, electron dissociation and electron impact dissociation are based on the model given by (Richardson et al. 1998) and vary with position in the magnetosphere. The dominant neutral dissociation channels H20->OH+H, H20-> O+H2, and OH->O+H2 are considered.

Richardson, John D.↗
NASA NTRS1996

Two-stage model of radon-induced malignant lung tumors in rats: effects of cell killing

A two-stage stochastic model of carcinogenesis is used to analyze lung tumor incidence in 3750 rats exposed to varying regimens of radon carried on a constant-concentration uranium ore dust aerosol. New to this analysis is the parameterization of the model such that cell killing by the alpha particles could be included. The model contains parameters characterizing the rate of the first mutation, the net proliferation rate of initiated cells, the ratio of the rates of cell loss (cell killing plus differentiation) and cell division, and the lag time between the appearance of the first malignant cell and the tumor. Data analysis was by standard maximum likelihood estimation techniques. Results indicate that the rate of the first mutation is dependent on radon and consistent with in vitro rates measured experimentally, and that the rate of the second mutation is not dependent on radon. An initial sharp rise in the net proliferation rate of initiated cell was found with increasing exposure rate (denoted model I), which leads to an unrealistically high cell-killing coefficient. A second model (model II) was studied, in which the initial rise was attributed to promotion via a step function, implying that it is due not to radon but to the uranium ore dust. This model resulted in values for the cell-killing coefficient consistent with those found for in vitro cells. An "inverse dose-rate" effect is seen, i.e. an increase in the lifetime probability of tumor with a decrease in exposure rate. This is attributed in large part to promotion of intermediate lesions. Since model II is preferable on biological grounds (it yields a plausible cell-killing coefficient), such as uranium ore dust. This analysis presents evidence that a two-stage model describes the data adequately and generates hypotheses regarding the mechanism of radon-induced carcinogenesis.

NASA Program Radiation Health↗
NASA NTRS1975

The relative abundances of galactic cosmic ray Be-7, Be-9, and Be-10

The isotopic composition of galactic cosmic ray Be near 100 MeV/nucleon was measured in interplanetary space with high-resolution solid-state telescopes on the IMP-7 and IMP-8 satellites during 1973-1974. These two independent measurements yield Be-10/Be ratios above 10%. Taken together with the galactic propagation model described in the text, these results show that the cosmic ray 'clock' lifetime (most probable value of roughly 20 million years) is significantly greater than that deduced for a nominal interstellar gas density of about 1 to 3 atoms/cu cm.

Garcia-Munoz, M.↗
NASA NTRS1980

Heat storage capability of a rolling cylinder using Glauber's salt

The rolling cylinder phase change heat storage concept was developed to the point where a prototype design is completed and a cost analysis is prepared. A series of experimental and analytical tasks are defined to establish the thermal, mechanical, and materials behavior of rolling cylinder devices. These tasks include: analyses of internal and external heat transfer; performance and lifetime testing of the phase change materials; corrosion evaluation; development of a mathematical model; and design of a prototype and associated test equipment.

Herrick, C. S.↗
NASA NTRS1980

Radio emission evolution of nonstationary sources in the Hedgehog model

Correlations are obtained for numerical calculation of flux F sub v and polarized radiation intensity of a cloud of arbitrary geometry, consisting of ultrarelativistic electrons that dissipate in a radial magnetic field of the nucleus at a random angle to the observer. It is possible that some of the variable extragalactic objects that were previously described by the Shklovskiy model are young formations in the examined model. Radio astronomical observations would permit a determination of their distance, age, and lifetime.

Kovalev, Y. A.↗
NASA NTRS1981

Radiative decay of massious neutrinos: Implications for physics and astrophysics

The radiative lifetime tau for the decay of massious neutrinos is calculated using various physical models for neutrino decay. The results are related to the astrophysical problem of the detectability of the decay photons from cosmic neutrinos. Conversely, the astrophysical data are used to place lower limits on tau. However, an observed feature at approximately 1700 A in the ultraviolet background radiation at high galactic latitudes may be from the decay of neutrinos with mass approximately 14 eV. This would require a decay rate much larger than the predictions of standard models but could be indicative of a decay rate possible in composite models. It is considered that this may be an important test for substructure in leptons and quarks.

Stecker, F. W.↗