SEARCH · Engineering Papers

Results for “large system simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

DOE OSTI2024

The Influence of ENSO Diversity on Future Atlantic Tropical Cyclone Activity

El Niño–Southern Oscillation (ENSO) influences seasonal Atlantic tropical cyclone (TC) activity by impacting environmental conditions important for TC genesis. However, the influence of future climate change on the teleconnection between ENSO and Atlantic TCs is uncertain, as climate change is expected to impact both ENSO and the mean climate state. We used the Weather Research and Forecasting Model on a tropical channel domain to simulate 5-member ensembles of Atlantic TC seasons in historical and future climates under different ENSO conditions. Experiments were forced with idealized sea surface temperature configurations based on the Community Earth System Model (CESM) Large Ensemble representing: a monthly varying climatology, eastern Pacific El Niño, central Pacific El Niño, and La Niña. The historical simulations produced fewer Atlantic TCs during eastern Pacific El Niño compared to central Pacific El Niño, consistent with observations and other modeling studies. For each ENSO state, the future simulations produced a similar teleconnection with Atlantic TCs as in the historical simulations. Specifically, La Niña continues to enhance Atlantic TC activity, and El Niño continues to suppress Atlantic TCs, with greater suppression during eastern Pacific El Niño compared to central Pacific El Niño. In addition, we found a decrease in the Atlantic TC frequency in the future relative to historical regardless of ENSO state, which was associated with a future increase in northern tropical Atlantic vertical wind shear and a future decrease in the zonal tropical Pacific sea surface temperature (SST) gradient, corresponding to a more El Niño–like mean climate state. Our results indicate that ENSO will remain useful for seasonal Atlantic TC prediction in the future.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Efficient emulation of relativistic heavy ion collisions with transfer learning

Measurements from the Large Hadron Collider (LHC) and the Relativistic Heavy Ion Collider (RHIC) can be used to study the properties of quark-gluon plasma. Systematic constraints on these properties must combine measurements from different collision systems and methodically account for experimental and theoretical uncertainties. Such studies require a vast number of costly numerical simulations. While computationally inexpensive surrogate models (“emulators”) can be used to efficiently approximate the predictions of heavy ion simulations across a broad range of model parameters, training a reliable emulator remains a computationally expensive task. We use transfer learning to map the parameter dependencies of one model emulator onto another, leveraging similarities between different simulations of heavy ion collisions. By limiting the need for large numbers of simulations to only one of the emulators, this technique reduces the numerical cost of comprehensive uncertainty quantification when studying multiple collision systems and exploring different models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Future projections of wind patterns in California with the variable-resolution CESM: a clustering analysis approach

Wind energy production is expected to be affected by shifts in wind patterns that will accompany climate change. However, many questions remain on the magnitude and character of this impact, especially on regional scales. In this study, clustering is used to group and analyze large-scale wind patterns in California using model simulations from the variable-resolution Community Earth System Model (VR-CESM). Specifically, simulations have been produced that cover historical (1980–2000), mid-century (2030–2050), and end-of-century (2080–2100) time periods. Once clustered, observed changes to wind patterns can be analyzed in terms of both the change in frequency of those clusters and changes to winds within-clusters. Statistically significant capacity factors changes have been found at all five wind plant sites. Further, decomposition of the capacity factor changes into frequency changes and within-cluster changes enables a better understanding of their drivers. A further examination of the synoptic-scale fields associated with each cluster then provides a better understanding of how changes to large-scale meteorological fields are important for driving changes in localized wind speeds.

17 WIND ENERGY↗

DOE OSTI2022

Modeling the Joint Effects of Vegetation Characteristics and Soil Properties on Ecosystem Dynamics in a Panama Tropical Forest

Abstract In tropical forests, both vegetation characteristics and soil properties are important not only for controlling energy, water, and gas exchanges directly but also determining the competition among species, successional dynamics, forest structure and composition. However, the joint effects of the two factors have received limited attention in Earth system model development. Here we use a vegetation demographic model, the Functionally Assembled Terrestrial Ecosystem Simulator (FATES) implemented in the Energy Exascale Earth System Model (E3SM) Land Model (ELM), ELM‐FATES, to explore how plant traits and soil properties affect tropical forest growth and composition concurrently. A large ensemble of simulations with perturbed vegetation and soil hydrological parameters is conducted at the Barro Colorado Island, Panama. The simulations are compared against observed carbon, energy, and water fluxes. We find that soil hydrological parameters, particularly the scaling exponent of the soil retention curve ( B sw ), play crucial roles in controlling forest diversity, with higher B sw values (>7) favoring late successional species in competition, and lower B sw values (1 ∼ 7) promoting the coexistence of early and late successional plants. Considering the additional impact of soil properties resolves a systematic bias of FATES in simulating sensible/latent heat partitioning with repercussion on water budget and plant coexistence. A greater fraction of deeper tree roots can help maintain the dry‐season soil moisture and plant gas exchange. As soil properties are as important as vegetation parameters in predicting tropical forest dynamics, more efforts are needed to improve parameterizations of soil functions and belowground processes and their interactions with aboveground vegetation dynamics.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

A Comparative Study of Physics‐Informed and Data‐Driven Neural Networks for Compound Flood Simulation at River‐Ocean Interfaces: A Case Study of Hurricane Irene

Simulating compound flooding (CF) at the river-ocean interface within large-scale Earth System Models (ESMs) presents significant challenges due to complex interactions between river discharge, storm surge, and tides. This study assesses the comparative advantages of physics-informed and data-driven machine learning (ML) approaches for enhancing local ESM performance. We systematically compare data-driven neural network models (i.e., CNNs, U-Net, Long Short-Term Memory (LSTM), Gated Recurrent Unit), and physics-informed neural network (PINN) models, including vanilla PINN and a finite-difference-based PINN (FD-PINN). Specifically, FD-PINN is introduced to enhance computational efficiency, accelerating vanilla PINNs by ∼6.5 times while improving accuracy. To enhance data-driven model training, a new data-generation approach is developed to sample historical fluvial and coastal flood events, which ensures a robust data set for extreme event prediction. The models are evaluated using a realistic one-dimensional river domain extracted from an ESM's river mesh and the Hurricane Irene event as an independent test case. Results show that FD-PINN achieves accurate predictions with significantly reduced computational costs relative to vanilla PINNs. Among data-driven models, the best overall performance is achieved by a CNN-LSTM hybrid, which balances accuracy and efficiency. While a fully connected CNN (CNN-FC) provides the best accuracy, it incurs high computational cost. Architectures lacking strong temporal modeling tend to underperform on unseen events. These findings highlight the importance of sequence-aware designs for robust generalization. This study reveals the trade-offs between physics-informed and data-driven models and proposes an adaptive hybrid framework for integrating ML into ESMs to enhance local flood simulations.

Earth Systems Modeling↗

DOE OSTI2020

A Quantum Analog Coprocessor for Correlated Electron Systems Simulation

Analog quantum simulation is an approach for studying physical systems that might otherwise be computationally intractable to simulate on classical high-performance computing (HPC) systems. The key idea behind analog quantum simulation is the realization of a physical system with a low-energy effective Hamiltonian that is the same as the low-energy effective Hamiltonian of some target system to be studied. Purpose-built nanoelectronic devices are a natural candidate for implementing the analog quantum simulation of strongly correlated materials that are otherwise challenging to study using classical HPC systems. However, realizing devices that are sufficiently large to study the properties of a non-trivial material system (e.g., those described by a Fermi-Hubbard model) will eventually require the fabrication, control, and measurement of at least 0(10) quantum dots, or other engineered quantum impurities. As a step toward large-scale analog or digital quantum simulation platforms based on nanoelectronic devices, we propose a new approach to analog quantum simulation that makes use of the large Hilbert space dimension of the electronic baths that are used to adjust the occupancy of one or a few engineered quantum impurities. This approach to analog quantum simulation allows us to study a wide array of quantum impurity models. We can further augment the computational power of such an approach by combining it with a classical computer to facilitate dynamical mean-field theory (DMFT) calculations. DMFT replaces the solution of a lattice impurity problem with the solution of a family of localized impurity problems with bath couplings that are adjusted to satisfy a self-consistency condition between the two models. In DMFT, the computationally challenging task is the high-accuracy solution of an instance of a quantum impurity model that is determined self-consistently in coordination with a mean-field calculation. We propose using one or a few engineered quantum impurities with adjustable couplings to baths to realize an analog quantum coprocessor that effects the solution of such a model through measurements of a physical quantum impurity, operating in coordination with a classical computer to achieve a self-consistent solution to a DMFT calculation. We focus on implementation details relevant to a number of technologies for which Sandia has design, fabrication, and measurement expertise. The primary technical advances outlined in this report concern the development of a supporting modeling capability. As with all analog quantum simulation platforms, the successful design and operation of individual devices depends critically on one's ability to predict the effective low-energy Hamiltonian governing its dynamics Our project has made this possible and lays the foundation for future experimental implementations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Understanding Bifacial Photovoltaic's Potential

The performance of bifacial PV systems depends greatly on the installed conditions. Previous simulations and results have shown very high bifacial gain improvement, but this may not be the case for all conditions, particularly for large-scale systems with self-shading, lower-cost PV modules (PERC) which might have lower bifaciality coefficient, and field deployments over natural ground cover. But not to worry! Financial models indicate that even with these lower performance conditions, and with bifacial gain of 4%-7%, bifacial modules can still provide improved LCOE.

bifacial↗

DOE OSTI2022

Prediction of local concentration fields in porous media with chemical reaction using a multi scale convolutional neural network

The study of solute transport in porous media is of interest in many chemical engineering systems. Some example applications include packed bed catalytic reactors, filtration devices, and batteries. The pore scale modeling of these systems is time consuming and may require large computing resources, for this reason computational fluid dynamics (CFD) simulations are not practical if a large number of simulations is required, like in multiscale modeling, where a model at a large scale calls for pore scale simulations. It has been shown that neural networks can be trained with a dataset of flow simulations and then predict fields orders of magnitude faster, and with less computational resources, in new domains. However, it is crucial to provide the neural network with an effective description of the domain and the undergoing operating conditions to be able to train models that generalize accurately in unseen samples. Therefore, research is needed to employ neural networks in new complex systems. The appropriate training of a network for predicting coupled flow and solute transport processes is an outstanding problem due to the complex interplay between geometry and operating conditions. In this work, we train a multi scale convolutional neural network (MSNet) with a diverse dataset of simulations of transport and chemical reaction in porous media to predict the local concentration fields in images of porous media. Our dataset contains a wide diversity of sphere pack arrangements under different operating conditions (Péclet and Reynolds numbers). Further, we train a robust model by employing different input descriptors that represent the medium and the different operating conditions of each system. Our trained model is able to provide nearly instantaneous predictions, compared to around twenty hours of the CFD workflow, with less than 3.5% error on new geometries and transport conditions. Thus the model could be easily integrated in a multiscale workflow where fast response is needed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Formulation and solution approach for calibrating activity-based travel demand model-system via microsimulation

This study addresses the problem of calibrating utility-maximizing nested logit activity-based travel demand model-systems. After estimation, it is common practice to use aggregate measurements to calibrate the estimated model-system’s parameters prior to their application in transportation planning, policy making, and operations. However, calibration of activity-based model-systems has received much less attention. Existing calibration approaches are myopic heuristics in the sense that they do not consider the fundamental inter-dependencies among choice-models and do not have a systematic way to adjust model parameters. Also, other purely simulation-based approaches do not perform well in large-scale applications. In this study, we focus on utility-maximizing nested logit activity-based model-systems and calibrating aggregate statistics such as activity shares, mode shares, time-dependent & mode-specific OD flows, and time-dependent & mode-specific sensor counts. We formulate the calibration problem as a simulation-based optimization problem and propose a stochastic gradient-based solution procedure to solve it. The solution procedure relies on microsimulation to calculate expectations of the aggregate statistics of interest to the calibration problem. Additionally, we derive approximate analytical expressions for the gradient of the objective function —that are evaluated through microsimulation on mini-batches of the population. The proposed solution procedure is sensitive to the fundamental structure of the activity-based model-system and is non-myopic in considering the dependencies across its model components. The formulated optimization problem is non-convex, highly nonlinear, and potentially has multiple-minima. Lastly, we show —through a real-world application— that the proposed solution procedure outperforms other state-of-the-art purely simulation-based optimization approaches in terms of computational efficiency, stability, and convergence. We also compare various gradient-based solution algorithms to determine the best algorithm to update the parameters. This work has the potential to facilitate wider and easier application of activity-based model-systems.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Enhancing Photosynthesis Simulation Performance in ESMs with Machine Learning-Assisted Solvers

When simulating vegetation dynamics, photosynthesis accounts for a large fraction of the computational cost in most Earth System Models (ESMs). This is largely since photosynthesis is represented as a system of nonlinear equations, and the solution requires the use of an initial guess followed by many iterations of the numerical solver to obtain a solution. We use machine learning (ML) to replicate the response surface of the model’s numerical solver to improve the choice of initial guess, therefore requiring fewer iterations to obtain a final solution. We implemented this test on the leaf-level calculations as well as at the canopy scale, and for both we observed fewer iterations of the photosynthesis solver when a ML-based initial guess was implemented. The model tested here is the Energy Exascale Earth System Model - Land Model (ELM). The ML-based algorithms used here are trained on simulations from the model itself and used only to improve the initial guess for the solver; therefore, the model maintains its own set of physics to obtain the final solution. This work shows novel ways to utilize ML-based methods to improve the performance of numerical solvers in ESMs.

Massoud, Elias [ORNL] (ORCID:0000000217725361)↗

DOE OSTI2024

Scaling Ensembles of Data-Intensive Quantum Chemical Calculations for Millions of Molecules

Deep learning models are efficient computational tools that can accelerate the inverse design of molecules with desired functional properties by generating predictions at a fraction of the time required by traditional quantum chemical approaches. To ensure that a model maintains accuracy and transferability across broad regions of the chemical space explored during the inverse design, it must be trained on massively large volumes of simulation data. This requires running large-scale ensemble quantum chemical calculations on high-performance computing (HPC) systems for data collection. However, the efficient execution of such large ensemble calculations and the management of large volumes of output data require tools that can judiciously utilize computational resources and manage metadata overhead on the file system. Therefore, we present a high-performance, scalable, ensemble management framework for performing data-intensive quantum chemical electronic structure calculations for organic molecules. This framework provides abstractions to plug different ab initio, first principles, and first principles-based semi-empirical methods and executes them efficiently at large scale on HPC systems. It dynamically distributes tasks to resources and uses tiered storage for managing large collections of files. We employed this framework to process over ten million organic molecules and generate open-source datasets that provide UV-vis absorption spectra by running time-dependent density-functional tight-binding calculations. It is the largest database containing molecular optical spectra that were simulated with quantum chemical methods in a consistent manner.

Mehta, Kshitij↗

DOE OSTI2020

Xyce Case Study

With the elimination of underground nuclear testing and declining defense budgets, science-based stockpile stewardship requires increased reliance on high performance modeling and simulation of weapon systems. Today's weapon systems are comprised of various electrical components and systems. As a result, there is a need for tools that will allow the use of massively parallel modeling and simulation techniques on high performance computers in existing and future weapons' electrical systems models. The Xyce Parallel Electronic Simulator is a SPICE (Simulation Program with Integrated Circuit Emphasis)- compatible circuit simulator designed to run on large-scale parallel computing platforms, though it can also execute efficiently on a variety of architectures including single processor workstations. As a mature platform for large-scale parallel circuit simulation, Xyce supports standard capabilities available in commercial simulators, in addition to various devices and models specific to Sandia's needs. Specifically, Xyce aids in the design and verification of electrical and electronic circuits and systems prior to weapons' manufacturing and deployment.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2020

Xyce Case Study

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2022

Towards Ab-Initio Simulations of Crystalline Defects at the Exascale Using Spectral Quadrature Density Functional Theory

Defects in crystalline solids play a crucial role in determining properties of materials at the nano, meso- and macroscales, such as the coalescence of vacancies at the nanoscale to form voids and prismatic dislocation loops or diffusion and segregation of solutes to nucleate precipitates, phase transitions in magnetic materials via disorder and doping. First principles Density Functional Theory (DFT) simulations can provide a detailed understanding of these phenomena. However, the number of atoms needed to correctly simulate these systems is often beyond the reach of many widely used DFT codes. The aim of this article is to discuss recent advances in first principles modeling of crystal defects using the spectral quadrature method. The spectral quadrature method is linear scaling with respect to the number of atoms, permits spatial coarse-graining, and is capable of simulating non-periodic systems embedded in a bulk environment, which allows the application of appropriate boundary conditions for simulations of crystalline defects. In this article, we discuss the state-of-the-art in ab-initio modeling of large metallic systems of the order of several thousand atoms that are suitable for utilizing exascale computing resourses.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Combining Physics and Machine Learning for the Next Generation of Molecular Simulation

Simulating molecules and atomic systems at quantum accuracy is a grand challenge for science in the 21 st century. Quantum-accurate simulations would enable the design of new medicines and the discovery of new materials. The defining problem in this challenge is that quantum calculations on large molecules, like proteins or DNA, are fundamentally impossible with current algorithms. In this work, we explore a range of different methods that aim to make large, quantum-accurate simulations possible. We show that using advanced classical models, we can accurately simulate ion channels, an important biomolecular system. We show how advanced classical models can be implemented in an exascale-ready software package. Lastly, we show how machine learning can learn the laws of quantum mechanics from data and enable quantum electronic structure calculations on thousands of atoms, a feat that is impossible for current algorithms. Altogether, this work shows that combining advances in physics models, computing, and machine learning, we are moving closer to the reality of accurately simulating our molecular world.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2025

Impacts of Resolution on Heavy‐Precipitating Storms in Climate Model Hindcasts

The present study investigates the impact of horizontal resolutions on heavy‐precipitating storms using the Energy Exascale Earth System Model version2 (E3SMv2) at low (∼100 km, LR) and high (∼25 km, HR) resolutions through short‐range hindcasts. The short‐range hindcast approach ensures a faithful comparison of model resolution in simulating the same storm events under a controlled large‐scale environment. Using a phenomenon‐based framework, we attribute precipitation to specific storm types: tropical cyclones (TCs), extratropical cyclones, atmospheric rivers, and mesoscale convective systems (MCSs). Our findings show that E3SM hindcasts with both HR and LR configurations significantly underestimate storm‐associated precipitation intensity but overestimate precipitation from other sources. Furthermore, both HR and LR hindcasts face significant challenges in accurately simulating extreme precipitation events, particularly over MCS hotspots. Nevertheless, HR simulations capture more detailed and intense precipitation patterns with an improved representation of storm dynamics. HR hindcasts produce 16% more storm precipitation compared to LR. For precipitation extremes, HR simulates a 33% higher 99th percentile precipitation magnitudes compared to LR, and most of the increment comes from these four heavy‐precipitating storm types. The increase in precipitation mainly comes from stratiform precipitation rather than convective precipitation. The improvement in HR simulations varies across different storm types with TC showing the largest improvement. The phenomenon‐based approach provides important insights into precipitation simulations especially for extremes. Our results emphasize the need for further refinement in high‐resolution models to improve the accuracy of precipitation predictions, which is crucial for better understanding and mitigating climate change impacts.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Towards Optimal and Executable Distribution Grid Restoration Planning With a Fine-Grained Power-Communication Interdependency Model

Distribution service restoration (DSR) under natural disasters is always a critical and challenging problem for utility companies. An effective solution must not ignore the power-communication interdependency as various systems are getting increasingly connected in the Smart Grid era. In this paper, we propose a two-layer distribution system model with both power and communication components. Based on this model, we formulate the restoration process as a routing problem that schedules the path and action sequence of utility crews that involves repairing damaged components, closing power switches, and enabling communication paths between the control center and remote field devices. Further, we develop a simulation-based method to quantitatively evaluate the restoration process with public reference models of large-scale power systems. The experimental results show that our method improves the total restored energy up to 57.6% and reduces the recovery time up to 63% by considering the power-communication interdependency.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2020

Power Grid Simulation Testbed for Transactive Energy Management Systems

To effectively engage demand-side and distributed energy resources (DERs) for dynamically maintaining the electric power balance, the challenges of controlling and coordinating building equipment and DERs on a large scale must be overcome. Although several control techniques have been proposed in the literature, a significant obstacle to applying these techniques in practice is having access to an effective testing platform. Performing tests at scale using real equipment is impractical, so simulation offers the only viable route to developmental testing at scales of practical interest. Existing power-grid testbeds are unable to model individual residential end-use devices for developing detailed control formulations for responsive loads and DERs. Furthermore, they cannot simulate the control and communications at subminute timescales. To address these issues, this paper presents a novel power-grid simulation testbed for transactive energy management systems. Detailed models of primary home appliances (e.g., heating and cooling systems, water heaters, photovoltaic panels, energy storage systems) are provided to simulate realistic load behaviors in response to environmental parameters and control commands. The proposed testbed incorporates software as it will be deployed, and enables deployable software to interact with various building equipment models for end-to-end performance evaluation at scale.

24 POWER TRANSMISSION AND DISTRIBUTION↗