Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jet interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Jet through a wall protrusion in a cross-flow

The flow interactions between a jet issuing out of a protrusion in a wall and a crosswise flow are of interest because of the manner in which the spreading and mixing of the jet are affected by the flow separation, formation of vortices and recirculation zones and the associated flow instabilities. In combustors and in aircraft void spaces adjoining fuel tanks such interactions determine flame stability and propagation characteristics. Results from flow visualization and from predictions based on a three-dimensional viscous flow code are utilized to show the effects of several flow and geometrical parameters on the processes occuring in the vicinity of the protrusion and the jet.

Hong, S. K.↗

Effects of jet decay rate on jet induced loads on a flat plate

Experimental modelling of the interaction between a jet and an aircraft wing or fuselage in VTOL aircraft was undertaken using a cold jet exiting perpendicular to a flat plate in a uniform cross-flow. Effects of jet decay rate and jet-to-cross-flow velocity ratio, R, on the induced load distribution were investigated. Jet decay rate was increased by using cylindrical centerbodies submerged in the jet nozzle, which caused nonuniform initial jet velocity profiles. Quicker jet decay rate, corresponding to the presence of a centerbody, resulted in as much as 50% reduction in the induced pressure loads on the plate. This has implications in interpretation of results from earlier VTOL model studies of jet induced loads, where the jets have often had relatively slow decay rates due to uniform initial velocity profiles

Kuhlman, J. M.↗

On the reverse flow ceiling jet in pool fire-ventilation crossflow interactions in a simulated aircraft cabin interior

The behavior of the reverse flow ceiling jet against the ventilation flow from 0.58 to 0.87 m/s was investigated in a 1/3 scale model of a wide body aircraft interior. For all tests, strong reverse-flow ceiling jets of hot gases were detected well upstream of the fire. Both thicknesses of the reverse-flow ceiling jet and the smoke layer increased with the fire-crossflow parameter. The thickness of the smoke layer where the smoke flows along the main flow below the reverse-flow ceiling jet was almost twice that of the reverse-flow ceiling jet. Detailed spatial and time-varying temperatures of the gas in the test section were measured, and velocity profiles were also measured using a temperature compensated hot film.

Kwack, E. Y.↗

Propulsion and airframe aerodynamic interactions of supersonic V/STOL configurations, phase 1

A wind tunnel model of a supersonic V/STOL fighter configuration has been tested to measure the aerodynamic interaction effects which can result from geometrically close-coupled propulsion system/airframe components. The approach was to configure the model to present two different test techniques. One was a coventional test technique composed of two test modes. In the Flow-Through mode, absolute configuration aerodynamics are measured, including inlet/airframe interactions. In the Jet-Effects mode, incremental nozzle/airframe interactions are measured. The other test technique is a propulsion simulator approach, where a subscale, externally powered engine is mounted in the model. This allows proper measurement of inlet/airframe and nozzle/airframe interactions simultaneously.

Mraz, M. R.↗

Ejector Noise Suppression with Auxiliary Jet Injection

An experimental program to reduce aircraft jet turbulence noise investigated the interaction of small auxiliary jets with a larger main jet. Significant reductions in the far field jet noise were obtained over a range of auxiliary jet pressures and flow rates when used in conjunction with an acoustically lined ejector. While the concept is similar to that of conventional ejector suppressors that use mechanical mixing devices, the present approach should improve thrust and lead to lower weight and less complex noise suppression systems since no hardware needs to be located in the main jet flow. A variety of auxiliary jet and ejector configurations and operating conditions were studied. The best conditions tested produced peak to peak noise reductions ranging from 11 to 16 dB, depending on measurement angle, for auxiliary jet mass flows that were 6.6% of the main jet flow with ejectors that were 8 times the main jet diameter in length. Much larger reductions in noise were found at the original peak frequencies of the unsuppressed jet over a range of far field measurement angles.

Berman, Charles H.↗

Aircraft aerodynamic prediction method for V/STOL transition including flow separation

A numerical procedure was developed for the aerodynamic force and moment analysis of V/STOL aircraft operating in the transition regime between hover and conventional forward flight. The trajectories, cross sectional area variations, and mass entrainment rates of the jets are calculated by the Adler-Baron Jet-in-Crossflow Program. The inviscid effects of the interaction between the jets and airframe on the aerodynamic properties are determined by use of the MCAIR 3-D Subsonic properties are determined by use of the MCAIR 3-D Subsonic Potential Flow Program, a surface panel method. In addition, the MCAIR 3-D Geometry influence Coefficient Program is used to calculate a matrix of partial derivatives that represent the rate of change of the inviscid aerodynamic properties with respect to arbitrary changes in the effective wing shape.

Gilmer, B. R.↗

Some observations on the aerodynamics of an airfoil with a jet exhausting from the lower surface

A preliminary investigation was carried out to study the aerodynamics of an 18% symmetrical airfoil with a rectangular jet exhausting from the lower surface. Static pressures on the airfoil surface and total pressures in the near wake were measured at jet momentum coefficients ranging from 0 to 2. Results from these measurements were used to study the effects of a jet-cross flow interaction on the aerodynamics of an airfoil. These results were also compared with those obtained from a two-dimensional inviscid theoretical model. Measurements indicate positive and negative pressure regions in front of and behind the jet respectively. The intensity of the pressure in these regions increases with increasing jet strength. Upper surface pressures also decrease due to an effective angle of attack induced by the jet-cross flow interaction. The pressure variations on the upper and lower surfaces induce a positive sectional lift coefficient on the airfoil. The magnitude of the lift coefficient for a given momentum coefficient decreases with decreasing aspect ratio of the nozzle.

Leopold, D.↗

Airframe-Jet Engine Integration Noise

It has been found experimentally that the noise radiated by a jet mounted under the wing of an aircraft exceeds that of the same jet in a stand-alone environment. The increase in noise is referred to as jet engine airframe integration noise. The objectives of the present investigation are, (1) To obtain a better understanding of the physical mechanisms responsible for jet engine airframe integration noise or installation noise. (2) To develop a prediction model for jet engine airframe integration noise. It is known that jet mixing noise consists of two principal components. They are the noise from the large turbulence structures of the jet flow and the noise from the fine scale turbulence. In this investigation, only the effect of jet engine airframe interaction on the fine scale turbulence noise of a jet is studied. The fine scale turbulence noise is the dominant noise component in the sideline direction. Thus we limit out consideration primarily to the sideline.

Tam, Christopher↗

Aircraft System Noise Assessment of the NASA Single-Aisle Over-the-Wing Nacelle Configuration

A system noise assessment of the NASA single-aisle over-wing nacelle configuration, the OWN160, is carried out to estimate the performance of the configuration relative to NASA noise goals. The vehicle was first designed during the Environmentally Responsible Aviation(ERA)project, and last analyzed in 2016.Renewed interest in the concept necessitates an updated acoustic prediction. A model for jet-trailing edge interaction noise is developed from experimental data and included in the system noise assessment and analysis. Total system noise is predicted using NASA’s research-level Aircraft Noise Prediction Program (ANOPP-Research). Results are evaluated with and without the jet-trailing edge effect and compared to prior analysis and an equivalent conventional aircraft configuration, the TW160. The jet-trailing edge interaction affects the noise source ranking and increases the total noise of the OWN160, but the concept retains an advantage for noise reduction when compared to the conventional configuration with a cumulative reduction of 7.7 EPNdB (ERA results showed a 9.7 EPNdB reduction).

Kelly M Shelts↗

Editorial: Flux Rope Interaction With the Ambient Corona: From Jets to CMEs

Eruptive events within the Sun’s corona occur across a broad range of scales, from abundant small-scale jets to highly energetic coronal mass ejections (CMEs) (e.g., Webb and Howard, 2012; Raouafi et al., 2016; Kumar et al., 2021). Flux ropes have been understood to be a fundamental constituent of CMEs for many years, but it has only been more recently that their role in smaller eruptive events has become more appreciated (e.g., Sterling et al., 2015; Wyper et al., 2017). The key to understanding the differing morphology and nature of eruptions on these vastly differing scales is to understand the nature of the interaction between the flux ropes involved and the magnetic field of the surrounding corona. This Research Topic invited perspectives on (and examples of) flux rope eruptions across this broad range of scales, from formation to ejection, with the aim of highlighting commonalities and differences to aid in ultimately building a common framework for their understanding. Starting at the smallest scales, Schmieder presented a historically ordered review of jets and surges. The parallel improvements in instrumentation, physical insight and numerical simulations over time were highlighted along with the ways in which improvements in one area led to developments in another. Overall, jets of all forms are presented as the result of magnetic reconnection between two magnetic domains, with the reconnection involving a null point, bald patch separatrix or quasi-separatrix layer. In particular, jets with observed rotational motions often involve the transfer of twist from a small-scale filament or flux rope by reconnection across the separatrix.

solar corona and wind↗

On magnetodynamic effects initiated by a high-speed impact of a large cosmic body upon the Earth's surface

The impact of a large cosmic body with typical size R approximately = 1 km (mass M approximately = 4-10 Gt for a stony or icy body) moving with velocity V approximately = 50-70 km/s (kinetic energy of the order of 10 exp 21 J or 10 exp 6 Mt of TMT) on the Earth's surface leads to a full vaporization of a body and of a significant part of substance of the upper layers of the Earth and even to the ionization of this vapor cloud. As a result, a hypersonic jet of air and erosion plasma is formed. The kinetic energy E sub J is far above the total energy of the geomagnetic field of the Earth (approximately equivalent to the energy of 100 Mt) and the total mass of a fast-moving part of the jet M sub j approximately = 10 exp 12 kg is far above the mass of atmosphere in the jet expansion cone. Thus, the jet will propagate practically inertially with the constant mean velocity U approximately = 10-20 km/s and even higher. The interaction of this plasma jet with the Earth's magnetic field causes magnetodynamic effects similar to those which are produced by cosmic nuclear explosions but of a larger scale. The preliminary results of experimental and numerical modeling of the plasma jet-magnetosphere interaction are presented.

Nemchinov, I. V.↗

Lateral control at high angles of attack using pneumatic blowing through a chined forebody

Directional control through the use of pneumatic blowing was investigated on a generic subscale model with a chined forebody with blowing through a chine slot in a direction normal to the forebody surface. Comparisons are made with a vertical tail on and off, and with control through rudder deflection. Force and moment data were obtained for various blowing coefficients over a 0-75 deg alpha range, and flow visualization was also conducted in order to see qualitative effects on the flowfield. Blowing through a chined forebody generates yaw moments at large alpha where control surfaces lose their effectiveness; these moments are much larger than obtained by jet thrust alone, since the forebody flowfield is modified through the interaction of the jet with the chine vortices. Directional control increased with angle of attack for a given blowing coefficient until a maximum was reached. Further increases in angle of attack results in a rapid loss of effectiveness. For angles of attack above 60 deg, yaw moments are generated by simple jet thrust effect. The effectiveness of the pneumatic system depended on tail configuration.

Arena, A. S., Jr.↗

Radio jets in colliding galaxies: Testing the interaction-activity connection

The idea that galaxy interactions and merging are related to the generation of starburst and AGN activity in galactic nuclei has been the subject of intensive investigations over the past several years and is still a matter of lively debate. Peculiar morphologies, indicative of tidal interactions, have been detected in high-luminosity radio galaxies, in quasars, and in ultraluminous IRAS galaxies. In addition, low-luminosity radio and active galaxies show similar evidence for a recent merger or for nearby companions. In a recent CCD optical study of galaxies selected on the basis that they all contain well defined radio jets, it was found that almost half of the sample consists of pairs of elliptical galaxies. Many of these low-luminosity radio galaxies with companions show a well defined distorted radio jet structure at the VLA scale with an S- or C-shaped morphology. We have developed a general numerical simulation algorithm for ballistic radio jets with the intention of applying this model to the study of the bent jets seen in colliding pairs of galaxies and with the hope of testing the well documented interaction-activity connection. In our model the morphological evolution of the jets is determined by their response to the simple mechanical forces (i.e., gravity and ram pressure) imposed on them from both the host and the companion galaxies. Radiative losses, jet precession, magnetic effects, relativistic terms, and hydrodynamic instabilities have all been ignored. Starting with a previously derived collision model for the interacting pair of elliptical galaxies NGC 4782/4783, we have used our algorithm to simulate the specific two-sided jet morphology seen in the radio source 3C 278, associated with NGC 4782. This is the first time that such jet simulations have been produced for a galaxy pair whose relative orbit was determined independently from the jet modeling.

Borne, Kirk D.↗

The ground vortex flow field associated with a jet in a cross flow impinging on a ground plane for uniform and annular turbulent axisymmetric jets

An experimental study was conducted of the impingement of a single circular jet on a ground plane in a cross flow. This geometry is a simplified model of the interaction of propulsive jet exhaust from a V/STOL aircraft with the ground in forward flight. Jets were oriented normal to the cross flow and ground plane. Jet size, cross flow-to-jet velocity ratio, ground plane-to-jet board spacing, and jet exit turbulence level and mean velocity profile shape were all varied to determine their effects on the size of the ground vortex interaction region which forms on the ground plane, using smoke injection into the jet. Three component laser Doppler velocimeter measurements were made with a commercial three color system for the case of a uniform jet with exit spacing equal to 5.5 diameters and cross flow-to-jet velocity ratio equal to 0.11. The flow visualization data compared well for equivalent runs of the same nondimensional jet exit spacing and the same velocity ratio for different diameter nozzles, except at very low velocity ratios and for the larger nozzle, where tunnel blockage became significant. Variation of observed ground vortex size with cross flow-to-jet velocity ratio was consistent with previous studies. Observed effects of jet size and ground plane-to-jet board spacing were relatively small. Jet exit turbulence level effects were also small. However, an annular jet with a low velocity central core was found to have a significantly smaller ground vortex than an equivalent uniform jet at the same values of cross flow-to-jet velocity ratio and jet exit-to-ground plane spacing. This may suggest a means of altering ground vortex behavior somewhat, and points out the importance of proper simulation of jet exit velocity conditions. LV data indicated unsteady turbulence levels in the ground vortex in excess of 70 percent.

Cavage, William M.↗

Acoustic interactions between an altitude test facility and jet engine plumes: Theory and experiments

The overall objective of the described effort was to develop an understanding of the physical mechanisms involved in the flow/acoustic interactions experienced in full-scale altitude engine test facilities. This is done by conducting subscale experiments and through development of a theoretical model. Model cold jet experiments with an axisymmetric convergent nozzle are performed in a test setup that stimulates a supersonic jet exhausting into a cylindrical diffuser. The measured data consist of detailed flow visualization data and acoustic spectra for a free and a ducted plume. It is shown that duct resonance is most likely responsible by theoretical calculations. Theoretical calculations also indicate that the higher discrete tones observed in the measurements are related to the screech phenomena. Limited experiments on the sensitivity of a free 2-D, C-D nozzle to externally imposed sound are also presented. It is shown that a 2-D, C-D nozzle with a cutback is less excitable than a 2-D C-D nozzle with no cutback. At a pressure ratio of 1.5 unsteady separation from the diverging walls of the nozzle is noticed. This separation switches from one wall to the opposite wall thus providing an unsteady deflection of the plume. It is shown that this phenomenon is related to the venting provided by the cutback section.

Ahuja, K. K.↗

Heavy flavor jet substructure at lepton colliders

We provide a detailed analysis of event-shape observables, namely the energy correlation function and jet angularity, for heavy-flavor jets produced in electron-positron collisions, focusing on quantum chromodynamics (QCD) interactions. Using modern jet substructure techniques, we investigate the dead-cone effect, where QCD radiation is suppressed around a heavy quark within an angle proportional to its mass. Our analysis achieves next-to-leading logarithmic accuracy, combined with partial fixed-order contributions, to improve the description of the transition near the dead-cone threshold. To ensure a comprehensive perspective, we compare our analytical results with predictions from the pythia, herwig, and sherpa Monte Carlo simulations at past and future lepton colliders.

Perturbative QCD↗