Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ion number density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Chemical and Physical Properties of Bulk Aerosols within Four Sectors Observed during TRACE-P

Chemical and physical aerosol data collected on the DC-8 during TRACE-P were grouped into four sectors based on back trajectories. The four sectors represent long-range transport from the west (WSW), regional circulation over the western Pacific and Southeast Asia (SE Asia), polluted transport from Northern Asia with substantial sea salt at low altitudes (NNW) and a substantial amount of dust (Channel). WSW has generally low mixing ratios at both middle and high altitudes, with the bulk of the aerosol mass due to non-sea-salt water-soluble inorganic species. Low altitude SE Asia also has low mean mixing ratios in general, with the majority of the aerosol mass comprised of non-sea-salts, however, soot is also relatively important m this region. "w had the highest mean sea salt mixing ratios, with the aerosol mass at low altitudes (a km) evenly divided between sea salts, mm-sea-salts, and dust. The highest mean mixing ratios of water-soluble ions and soot were observed at the lowest altitudes (a km) in the Channel sector. The bulk of the aerosol mass exported from Asia emanates h m Channel at both low and midaltitudes, due to the prevalence of dust compared to other sectors. Number densities show enhanced fine particles for Channel and NNW, while their volume distributions are enhanced due to sea salt and dust Low-altitude Channel exhibits the highest condensation nuclei ((34) number densities along with enhanced scattering coefficients, compared to the other sectors. At midaltitudes (2-7 km), low mean CN number densities coupled with a high proportion of nonvolatile particles (265%) observed in polluted sectors (Channel and NNW) are attributed to wet scavenging which removes hygroscopic CN particles. Low single scatter albedo m SE Asia reflects enhanced soot

Jordan, C. E.↗
DOE OSTI2022

In-situ microstructure observation of oxidized SiC layer in surrogate TRISO fuel particles under krypton ion irradiation

In accidental scenarios of high temperature gas-cooled reactors, both oxidation of and irradiation to the SiC layer in tri-structural-isotropic (TRISO) fuel particles can change the microstructure and integrity of the fuel elements. Here, in the present study, microstructure and defect evolution in the oxidized SiC layer of surrogate TRISO fuel particles under 1.2 MeV krypton ion irradiation was observed by in-situ transmission electron microscopy. The SiC layers oxidized in water vapor at 1200 °C were irradiated azt room temperature and 800 °C and at damage levels of 0.28–11.2 dpa, respectively. SiC and SiO 2 were found to still be in their crystal structures at the damage level of 11.2 dpa at 800 °C, while SiC was observed to have been amorphized at only 0.56 dpa irradiation at room temperature. The defect number density at 800 °C was an order of magnitude lower than that in the sample irradiated at room temperature. Also, crystalline SiO 2 had higher radiation resistance compared to SiC. A defect reaction rate theory was utilized to understand the fundamental defect evolution process and irradiation resistance difference.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Combined Machine Learning and Molecular Dynamics Reveal Two States of Hydration of a Single Functional Group of Cationic Polymeric Brushes

The state of hydration of a macromolecular system regulates a plethora of different properties of such a system. In this article, we develop a novel machine learning (ML) approach, based on the unsupervised clustering algorithm, for probing the hydration behavior of the {N(CH 3 ) 3 } + functional group of the PMETAC [Poly(2-(methacryloyloxy)ethyl trimethylammonium chloride] polyelectrolyte (PE) brush system. The PE brushes and the brush-supported water molecules and counterions (chloride ions) are first described using all-atom molecular dynamics (MD) simulations. The simulation data is subsequently used in our ML framework to identify that (1) the {N(CH 3 ) 3 } + functional groups of the PMETAC brushes have two distinct hydration states with one state (state 1) being characterized by less structured water molecules and the other state (state 2) being characterized by more structured water molecules and (2) an enhancement in the brush grafting density leads to the progressive dissapparenace of state 2. An increase in the grafting density increases the number of chloride counterions in a given volume around the {N(CH 3 ) 3 } + functional group and increases the number of shared water molecules between the {N(CH 3 ) 3 } + and Cl - . The chloride counterions are associated with a hydration layer with much less structured water molecules. Therefore, with an increase in the grafting density, an increase in the percentage of shared water molecules leads to the prevalence of the hydration state [of the {N(CH 3 ) 3 } + moiety] with less structured water molecules. Finally, we explain how the present findings are commensurate with two key previous related results, namely a significantly large chloride ion mobility inside the PMETAC brush layer and the {N(CH 3 ) 3 } + -Cl - average distance remaining independent of the PMETAC brush grafting density. Furthermore, we anticipate that the combined ML-MD-simulation approach proposed in this study can be adapted to probe other soft matter systems to reveal new insights of the underlying mechanisms of emergent phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Plasma Assisted Combustion and Chemical Processing: Chapter 9 - Plasma Diagnostics

Plasma dynamics and chemistry have a broad range of timescales from picoseconds to milliseconds. In addition, it involves nonequilibrium energy transfer between electrons, ions, electronically and vibrationally excited states, radicals, intermediate species, and reactants and products as well as surface charges and chemistry. To understand plasma physics and chemistry, it is essential to conduct time and space resolved, quantitative detection of nonequilibrium temperature distributions, electron energy and number density, electric field, and species concentrations. There are enormous publications and review articles on this subject. The focus of this chapter is to be placed on the most recent progress in gas phase plasma properties and chemistry, especially on optical emission spectroscopy, laser absorption spectroscopy, Faraday rotational spectroscopy, Raman and Thompson scattering, femtosecond and picosecond (fs/ps) coherent anti-Stokes Raman scattering (CARS) spectroscopy, and electric field-induced second harmonic generation methods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1972

A numerical study of a three dimensional spherical thermospheric density and wind model

Numerical calculations of the generation and propagation of the two important fundamental symmetric tidal wave modes - the diurnal mode (1, 1, 1,) and the semidiurnal mode (2, 2, 2) - were performed applying a realistic model thermosphere and taking into account heat conduction and the temporally and spatially varying ion-neutral collision number. Both wave modes are predominantly generated by the solar EUV heat input. It is shown that the latitude structure of the (1, 1, 1)-mode which is identical with the Hough function(1, -1) within the lower non-dissipative atmosphere degenerates into the spherical function P sub 1, 1 at thermospheric heights. The pressure field of this mode constitutes the observed pressure bulge of the thermosphere, the diurnal component of which peaks at 15 h L. T. The electric polarization field of the geomagnetic Sq current generates a significant fraction of this wave mode at F layer heights. This wave component shifts the total horizontal wind system to earlier times by about 1 hour in agreement with ionospheric observations. The latitude structure of the (2, 2, 2) mode is identical with the Hough function (2, 2) within the lower non-dissipative atmosphere. It degenerates to the spherical function P sub 2, 2 at thermospheric heights.

Volland, H.↗
NASA NTRS1974

Spin projection of single-determinant wavefunctions

The components of the one- and two-particle density matrices resulting from spin projection of a single-determinant wave function are rederived by the method of expansion in terms of the natural orbitals of charge density, and the results are found to diverge from those given by Harriman and Sando for the two-particle case. The theory is generalized to include molecules with unequal numbers of electrons and basis orbitals and is applied to a number of organic molecules and ions. The correctness and internal consistency of the results argue in favor of the modification described.

Phillips, D. H.↗
NASA NTRS1982

Mg/+/ morphology from visual airglow experiment observations

Observations of low-latitude Mg(+) by the Visual Airglow Experiment on Atmosphere Explorer E were analyzed by a two-dimensional inversion technique. Number density profiles as functions of geographic position were obtained in the F2 region. The profiles represent daytime northern winter, solar maximum conditions and reveal frequent occurrences of large number densities (50-100 per cu cm) at altitudes up to 475 km. Maximum densities are usually found near the equator at 1200-1400 LT. The equatorial density then decreases as the peak concentrations shift to higher latitudes. Longitudinal differences in the time development of the metal ion density appear in the afternoon. These seem to be due to the increasing importance of zonal winds and/or to longitudinal differences in the vertical ion drift velocity.

Fesen, C. G.↗
NASA NTRS1985

Response of the middle atmosphere to Sco X-1

On the night of Mar. 9, 1983 (UT) at Punta Lobos Launch Site, Peru (12.5 deg S, 76.8 deg W, magnetic dip -0.7 deg), a sequence of sounding rockets was flown to study the electrical structure of the equatorial middle atmosphere and to evaluate perturbations on this environment induced by the X-ray star Sco X-1. The rocket series was anchored by two Nike Orion payloads (31.032 and 31.033) which were launched at 0327 and 0857 UT, near Sco X-1 star-rise and after it had attained an elevation angle of 70 deg E. An enhanced flux of X-rays was observed on the second Nike Orion flight (31.033). This increase is directly attributed to Sco X-1, both from the spectral properties of the measured X-ray distribution and by spatial information acquired from a spinning X-ray detector during the upleg portion of the 31.033 flight. Simultaneously, a growth in ion conductivity and density was seen to occur in the lower mesosphere between 60 and 80 km on the second flight, specifically in the region of maximum energy deposition by the Sco X-1 X-rays. The results imply the presence of a significant number of ionized heavy constituents within the lower mesosphere, with masses possibly in the submacroscopoic range.

Goldberg, R. A.↗
NASA NTRS2003

Self-Consistent Model of Magnetospheric Ring Current and Electromagnetic Ion Cyclotron Waves: The May 2-7, 1998, Storm

Complete description of a self-consistent model for magnetospheric ring current interacting with electromagnetic ion cyclotron waves is presented. The model is based on the system of two kinetic equations; one equation describes the ring current ion dynamics, and another equation describes the wave evolution. The effects on ring current ions interacting with electromagnetic ion cyclotron waves, and back on waves, are considered self-consistently by solving both equations on a global magnetospheric scale under non steady-state conditions. In the paper by Khazanov et al. [2002] this self-consistent model has only been shortly outlined, and discussions of many the model related details have been omitted. For example, in present study for the first time a new algorithm for numerical finding of the resonant numbers for quasilinear wave-particle interaction is described, or it is demonstrated that in order to describe quasilinear interaction in a multi-ion thermal plasma correctly, both e and He(+) modes of electromagnetic ion cyclotron waves should be employed. The developed model is used to simulate the entire May 2-7, 1998 storm period. Trapped number fluxes of the ring current protons are calculated and presented along with their comparison with the data measured by the 3D hot plasma instrument Polar/HYDRA. Examining of the wave (MLT, L shell) distributions produced during the storm progress reveals an essential intensification of the wave emissions in about two days after main phase of storm. This result is well consistent with the earlier ground-based observations. Also the theoretical shapes and the occurrence rates for power spectral densities of electromagnetic ion cyclotron waves are studied. It is found that in about 2 days after the storm main phase on May 4, mainly non Gaussian shapes of power spectral densities are produced.

Khazanov, G. V.↗
DOE OSTI2025

Interpreting experimental measurements of helium bubbles using stochastic cluster dynamics models of heterogeneous nucleation and growth in irradiated ferritic alloys

Among a number of other advantageous features, ferritic/martensitic steels are being considered as fusion reactor structural materials due to their low intrinsic swelling under irradiation. However, under high-energy neutron irradiation, He produced through (n, α) reactions stabilizes vacancy clusters, which then act as seeds for bubble formation and growth, negating the intrinsic swelling resistance of these alloys. Standard models of irradiation damage accumulation and microstructural evolution consider homogeneous nucleation as the basis for bubble formation and growth. However, this generally does not explain the large bubble densities and sizes observed experimentally under a number of different conditions. Here, we propose a more realistic physical model of bubble nucleation, formation, and growth designed to capture recent experimental measurements of He-bubble formation and evolution during co-implantation of He and Fe ions in model ferritic alloys. We find that experimental results are explained only when the following three features are considered simultaneously: (i) heterogeneous nucleation of He-vacancy bubbles at defect sinks (e.g., dislocations, grain boundaries, and second-phase precipitates), (ii) nucleation and growth of bubbles via the ‘trap mutation’ mechanism (i.e., spontaneous production of Frenkel pairs due to absorption of He atoms), and (iii) transition from a growth-limited, He-stabilized bubble regime to a ‘runaway’ void-type growth scenario. The model is implemented into a stochastic cluster dynamics framework that takes advantage of cluster size grouping methods to accelerate the simulations, allowing us to reach 10 dpa of simulated irradiated dose, and to capture cluster sizes in excess of 20 nm. Further, a careful extrapolation exercise conducted assuming classical nucleation theory leads to excellent agreement with the experimental measurements at 50 dpa of irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Local ionic transport enables selective PGM-free bipolar membrane electrode assembly

Bipolar membranes in electrochemical CO 2 conversion cells enable different reaction environments in the CO 2 -reduction and O 2 -evolution compartments. Under ideal conditions, water-splitting in the bipolar membrane allows for platinum-group-metal-free anode materials and high CO 2 utilizations. In practice, however, even minor unwanted ion crossover limits stability to short time periods. Here we report the vital role of managing ionic species to improve CO 2 conversion efficiency while preventing acidification of the anodic compartment. Through transport modelling, we identify that an anion-exchange ionomer in the catalyst layer improves local bicarbonate availability and increasing the proton transference number in the bipolar membranes increases CO 2 regeneration and limits K + concentration in the cathode region. Through experiments, we show that a uniform local distribution of bicarbonate ions increases the accessibility of reverted CO 2 to the catalyst surface, improving Faradaic efficiency and limiting current densities by twofold. Using these insights, we demonstrate a fully platinum-group-metal-free bipolar membrane electrode assembly CO 2 conversion system exhibiting <1% CO 2 /cation crossover rates and 80-90% CO 2 -to-CO utilization efficiency over 150 h operation at 100 mA cm -2 without anolyte replenishment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1972

Evidence for the existence of negative ions in the D and lower E regions at twilight

Evidence for negative ions in the lower ionosphere is based on the difference between simultaneously measured profiles of electron and positive ion density. The electron density profiles reported were obtained from ground-to-rocket radio wave absorption measurements while Gerdien ion traps were used to measure the positive ion profiles. Results from a series of three rockets launched from Thumba, India near sunset on 27 March, 1970 indicate that a significant number of negative ions are formed at altitudes as high as 95 km at twilight.

Kane, J. A.↗
NASA NTRS1973

Effect of energetic oxygen atoms on neutral density models.

The dissociative recombination of O2(+) and NO(+) in the F region results in the production of atomic oxygen and atomic nitrogen with substantially greater kinetic energy than the ambient atoms. In the exosphere these energetic atoms have long free paths. They can ascend to altitudes of several thousand kilometers and can travel horizontally to distances of the order of the earth's radius. The distribution of energetic oxygen atoms is derived by means of models of the ion and neutral densities for quiet and disturbed solar conditions. A distribution technique is used to study the motion of the atoms in the collision-dominated region. Ballistic trajectories are calculated in the spherical gravitational field of the earth. The present calculations show that the number densities of energetic oxygen atoms predominate over the ambient atomic oxygen densities above 1000 km under quiet solar conditions and above 1600 km under disturbed solar conditions.

Rohrbaugh, R. P.↗
NASA NTRS1980

The oxygen polar corona

At high-latitude regions, energetic oxygen atoms are produced by a nonthermal mechanism associated with precipitated energetic atomic oxygen ions during disturbed periods. The upward moving nonthermal atoms can redistribute themselves at higher altitudes. For the storm of December 17, 1971, assuming the energetic O(+) ions are uniformly precipitated between 50 deg and 70 deg magnetic latitudes, the nonthermal oxygen atoms become dominant over the ambient at about 700 km on the dayside and at about 600 km on the nightside at 60 deg magnetic latitude. Globally, a high-number-density atomic oxygen corona appears between 50 deg and 70 deg magnetic latitudes above the exobase, and the maximum is located at a few degrees poleward from the center of the band (63 deg magnetic latitude).

Yee, J. H.↗
NASA NTRS2003

RF Manipulation and Detection of Protons in the High Performance Antiproton Trap (HiPAT) Experiment

HiPAT is a Penning-Malmberg trap designed to contain 10(exp 12) particles diagnostics of the plasma. Destructive particle detection is performed by extracting trapped ions from HiPAT and colliding them with a microchannel plate detector (providing number and energy information). The improved RF system has been used to detect various plasma modes for both electron and ion plasmas in the two traps at MSFC, including axd, cyclotron, and diocotron modes. New diagnostics are also being added to HiPAT to measure the axial density distribution of the trapped cloud to match measured RF plasma modes to plasma conditions. In addition, plasma modeling efforts have been started using the XOOPIC code.

Martin, James↗
DOE OSTI2021

Comparison of heavy-ion transport simulations: Mean-field dynamics in a box

Within the transport model evaluation project (TMEP) of simulations for heavy-ion collisions, the mean-field response is examined here. Specifically, zero-sound propagation is considered for neutron-proton symmetric matter enclosed in a periodic box, at zero temperature and around normal density. The results of several transport codes belonging to two families (BUU-like and QMD-like) are compared among each other and to exact calculations. For BUU-like codes, employing the test particle method, the results depend on the combination of the number of test particles and the spread of the profile functions that weight integration over space. These parameters can be properly adapted to give a good reproduction of the analytical zero-sound features. QMD-like codes, using molecular dynamics methods, are characterized by large damping effects, attributable to the fluctuations inherent in their phase-space representation. Moreover, for a given nuclear effective interaction, they generally lead to slower density oscillations, as compared to BUU-like codes. The latter problem is mitigated in the more recent lattice formulation of some of the QMD codes. Furthermore, the significance of these results for the description of real heavy-ion collisions is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Validation of SOLPS-ITER simulations with kinetic, fluid, and hybrid neutral models for JET-ILW low-confinement mode plasmas

For JET L-mode plasmas in low-recycling conditions (electron temperature at the outer strike point, T e,ot ≳ 30 eV ), SOLPS-ITER simulations agree within the error bars for the experimental profiles at the low-field side (LFS) divertor target. The peak Balmer-α (Dα ) emission in the LFS divertor agrees within the error bars of the KS3 filterscope diagnostic, but is approximately 30% lower than the peak value of the KT1 spectrometer. Simulations have been performed with fluid, kinetic, and hybrid models for the neutrals. The large fluid-kinetic discrepancies of more than a factor 2 are successfully corrected by using a hybrid fluid-kinetic approach, for which kinetic atoms are transferred to the fluid population when the local Knudsen number of the atom becomes smaller than a user-defined transition Knudsen number Kn t . The hybrid-kinetic discrepancies are limited to a few % for Kn t ≤ 100 . When increasing the upstream density to high-recycling conditions, at the onset of detachment ( T e,ot ≈ 5 eV ), the simulations predict more than a factor 2 lower peak ion saturation current to the LFS divertor than the experiments. Also the Dα emission is underpredicted with approximately a factor 2. For these high-recycling conditions, the fluid-kinetic discrepancies are limited to maximum 50%, which are again corrected by using the hybrid approach.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1986

Small-scale structures and the density irregularity of the inner corona

The observational evidence is considered that the electron density irregularity factor is much greater than unity in the inner corona, in particular, evidence derived from the photometric comparison of the K-corona emission p Beta with the EUV emission from coronal ions. A simple mathematical model was developed for the irregularity having a minimum number of parameters. This model was used to explore some implications of the observations and to show that well-known resolved structures such as polar plumes and coronal loops as presently understood cannot alone explain the irregularity.

Orrall, F. Q.↗