Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ion beam analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

STXM-C-XANES, IR Microspectroscopy, and Raman Microspectroscopy Analysis of Organic Matter in the Chwichiya 002 C3.00-Ungrouped Chondrite

Chwichiya 002 is a C3.00-ungrouped carbonaceous chondrite discovered in Western Sahara in 2018. The presence of hydrated phases in Chwichiya 002 was not confirmed by XRD analysis, and only a faint water and Si-O band attributed to phyllosilicate were observed by infrared transmission spectroscopy, indicating a very low degree of aqueous alteration (Meteoritical Bulletin, 2020). The structural order of polycyclic aromatic hydrocarbons evaluated by Raman spectroscopy indicates that the effect of thermal metamorphism is less severe than in the Semarkona meteorite, an LL3.00 ordinary chondrite (Meteoritical Bulletin, 2020). Chiwichiya 002 is a very primitive carbonaceous chondrite and an important information source for the early stage of the evolution of organic matter in the solar system. In this study, we investigated the molecular structure and distribution of organic matter in Chiwichiya 002 by Carbon X-ray Absorption Near Edge Structure (C-XANES) analysis using a Scanning Transmission X-ray Microscope (STXM). The STXM-C-XANES analysis has a spatial resolution of 20~100 nm and can observe the spatial distribution of organic materials in microstructures. In addition, to investigate the degree of thermal metamorphism of the organic matter, micro-IR, and micro-Raman spectroscopic analyses were performed. In addition, the Murchison CM2 chondrite was also analyzed for comparison. To evaluate contamination during analytical procedures, antigorite, which was heated in air at 500°C for 5 hours to eliminate organic matter was also analyzed in the same manner. The samples were milled into 100 nm-thick, thin sections using a Focused Ion Beam (FIB), and C-XANES spectra were obtained using the STXM at the High Energy Accelerator Research Organization, Photon Factory (PF), BL-19B. The obtained C-XANES spectra were smoothed and then fitted with Gaussian functions using the method of Le Guillou et al. (2018). The C-XANES showed that the ratio of oxygenated functional group (ketone, phenolic) carbons in Chwichiya 002 was lower than in Murchison, whereas the ratio of aliphatic carbons was almost the same. This may reflect the low degree of aqueous alteration of Chwichiya 002. In addition, contamination peaks were detected at 287.3-287.7 eV and 288.3-288.7 eV in the C-XANES spectra of some of the antigorite samples. The source of these peaks is under investigation. Raman spectroscopic analysis showed that the intensity ratio of the D band to the G band of Chwichiya 002 was slightly higher than that of Murchison. IR absorption spectra showed aromatic absorption at 1630 cm -1 , but there was little absorption due to aliphatic C-H around 2900 cm -1 . These results suggest that the organic matter in Chwichiya 002 may be more heated than in Murchison.

Chwichiya 002↗
NASA NTRS1983

Mass analysis of neutral particles and ions released during electrical breakdowns on spacecraft surfaces

A specialized spectrometer was designed and developed to measure the mass and velocity distributions of neutral particles (molecules and molecular clusters) released from metal-backed Teflon and Kapton films. Promising results were obtained with an insulation breakdown initiation system based on a moveable contact touching the insulated surfaces. A variable energy, high voltage pulse is applied to the contact. The resulting surface damage sites can be made similar in size and shape to those produced by a high voltage electron beam system operating at similar discharge energies. The point discharge apparatus was used for final development of several high speed recording systems and for measurements of the composition of the materials given off by the discharge. Results with this apparatus show evolution of large amounts of fluorocarbon fragments from discharge through Teflon FEP, while discharges through Kapton produce mainly very light hydrocarbon fragments at masses below about 80 a.m.u.

Kendall, B. R. F.↗
DOE OSTI2026

Pyrolysis_Molecular_Beam_Mass_Spectrometry_Analysis_of_hybrid_cross_of_Populus_tremula_x_P_alba_717-1B4_and_overexpression_of_a_lectin_receptor-like_kinase_(PtLecRLK1)

Stem tissues from the hybrid poplarPopulus tremula × P. albaclone 717-1B4 and from lectin receptor-like kinase overexpression lines PP7 and PP19 were individually colonized with the ectomycorrhizal fungiLaccaria bicolorstrain S238N,Hyaloscypha finlandicastrain PMI746, orUmbelopsis vinaceastrain PMI3018, as well as with a mixed fungal inoculum; non-inoculated plants served as controls. Plants were grown in a greenhouse at Oak Ridge National Laboratory and harvested in January 2025. Stem samples were analyzed using Pyrolysis–Molecular Beam Mass Spectrometry (Py-MBMS). Stems were harvested, debarked, dried, milled, destarched and ethanol extracted prior to analysis. Py-MBMS analysis was conducted using approximately 4 mg of wood from biomass and each sample was analyzed in duplicate. A Frontier PY2020 unit pyrolyzed samples at 500°C for 30 s in 80 µL deactivated stainless steel cups. An Extrel Super-Sonic MBMS Model Max 1000 was used to collect mass spectral data fromm/z30 to 450 at 17 eV and processed using Merlin Automation software (V3). Spectral ion intensities were normalized to the total ion chromatogram signal for each sample for analysis of spectral variance. Lignin content (wt %) was estimated based on relative responses from standards of known Klason lignin content using mean-normalized ion intensities ofm/z120, 124 (G), 137 (G), 138 (G), 150 (G), 152, 154 (S), 164 (G), 167 (S), 168 (S), 178 (G), 180, 181, 182 (S), 194 (S), 208 (S) and 210 (S) where G indicates guaiacyl-derived ions, S indicates syringyl-derived ions, and other ions either derive from other lignin monomers or multiple sources. Ratios of S and G lignin monomer units (S/G) were obtained by dividing the sum of S-based ions by the sum of G-based ions using mean-normalized ion intensities.

CBI↗
DOE OSTI2026

Optical interference for the guidance of cryogenic focused ion beam milling beyond the axial diffraction limit

Cryogenic focused ion beam (Cryo-FIB) milling has become a standard step in the cryogenic electron tomography (Cryo-ET) workflow and is required to thin cells to electron-semitransparency. However, this destructive process removes the vast majority of the cellular material and raises a critical question: what thin section should be preserved for Cryo-ET analysis? Using a tri-coincident cryogenic FIB-SEM-LM system, we identify an interferometric optical response that can be used for targeting lamella production to fluorescently labeled structures with accuracy beyond the diffraction limit. Here we demonstrate this approach using synthetic samples of fluorescent beads embedded in micron-scale droplets of amorphous ice. We then apply the approach to capture virions inside host cells. Successful targeting is confirmed by Cryo-ET revealing clusters of virions in intracellular vesicles. The method does not require any fluorescent fiducials or axial registration and can be performed on any fluorescently labeled structure that is visible in widefield fluorescence microscopy.

Cryoelectron microscopy↗
NASA NTRS1977

Mass spectrometer beam system for applications in the stratosphere

A special gas inlet system is required for reduction of high ambient pressures to ion source operating pressures for mass spectrometer investigations in the stratosphere for the determination of the abundance of minor constituents. A system has been designed which combines a mass spectrometer and a gas inlet system reducing pressure by differential pumping using high-speed liquid helium pumps and small orifices. The gas particles are formed into a neutral beam with a flag mechanism proceeding into the mass spectrometer ion source where they are ionized for subsequent mass separation. A laboratory model has been tested under conditions simulating stratospheric pressures. It was shown that the process is able to identify gases with abundances below 10 to the -8th. Some of the problems associated with gas analysis of trace constituents have been alleviated, and other applications of the system have been identified, such as pollution control and medicine.

Mauersberger, K.↗
NASA NTRS2000

Growth and Characterization of III-V Semiconductors for Device Applications

The research goal was to achieve a fundamental understanding of the physical processes occurring at the surfaces and interfaces of epitaxially grown InGaAs/GaAs (100) heterostructures. This will facilitate the development of quantum well devices for infrared optical applications and provide quantitative descriptions of key phenomena which impact their performance. Devices impacted include high-speed laser diodes and modulators for fiber optic communications at 1.55 micron wavelengths and intersub-band lasers for longer infrared wavelengths. The phenomenon of interest studied was the migration of indium in InGaAs structures. This work centered on the molecular beam epitaxy reactor and characterization apparatus donated to CAU by AT&T Bell Laboratories. The material characterization tool employed was secondary ion mass spectrometry. The training of graduate and undergraduate students was an integral part of this program. The graduate students received a thorough exposure to state-of-the-art techniques and equipment for semiconductor materials analysis as part of the Master''s degree requirement in physics. The undergraduates were exposed to a minority scientist who has an excellent track record in this area. They also had the opportunity to explore surface physics as a career option. The results of the scientific work was published in a refereed journal and several talks were presented professional conferences and academic seminars.

Williams, Michael D.↗
DOE OSTI2025

Analysis of the HAE activity in the TJ-II stellarator using a Landau closure model

The aim of this study is to analyze the stability of helical Alfvén eigenmodes (HAEs) in TJ-II discharges and the stabilizing effect of the energetic particles generated by the neutral beam injector (NBI) on pressure gradient-driven modes (PGDMs). HAE and PGDM stability is studied using the linear version of the gyro-fluid code FAR3d and the continuous structure by the STELLGAP code. First, Alfvén eigenmode (AE) and PGDM activity observed in the experiments is reproduced by the simulations, identifying unstable m/n = 4/7 − 2/3 and 7/12 − 5/8 HAEs triggered around ρ = 0.66 showing a frequency of 209 and 204 kHz, respectively, as well as 5/3 PGDM. Next, a parametric study is performed with respect to the thermal ion density and iota profile in the middle-outer plasma region to verify the robustness of the simulation results with respect to the uncertainty of experimental profiles. The analysis confirms that experimental uncertainty does not cause large deviations in the simulation results, showing the destabilization of the same HAEs for all the configurations tested. The simulations also indicate the decay of the 5/3 PGDM growth rate as the energetic particle (EP) population in the plasma increases, consistent with the experiment. Stability analysis of the n = 3, 7, 11, n = 5, 9, 13, n = 6, 10, 14, and n = 8, 12 helical families is performed with respect to the NBI operational regime for different EP energies, β as well as deposition profiles. The most unstable configuration is the radially localized on-axis NBI operation (stiff EP density profile gradients nearby the magnetic axis). Using the simulation model that reproduces the observed Alfvén activity, we extend the study to analyze NBI performance within a theoretical framework. It shows that increasing NBI voltage (which raises EP energy) leads to a degradation in NBI performance for a given power (related to EP β and their density). To achieve better NBI operation, higher voltage must be balanced with lower injection power, ensuring stable AEs while keeping the same EP β.

Plasma confinement↗
DOE OSTI2023

Alfvén eigenmode stability in a JET afterglow deuterium plasma and projections to deuterium–tritium plasmas

Abstract The performance of fusion devices relies strongly on the good confinement of energetic particles (EPs). Therefore, the investigation of EP transport by magnetohydrodynamic instabilities is one of the key aspects in the development of plasma scenarios. Alfvénic instabilities in particular can lead to significant losses of alpha particles that are essential for plasma self-heating. A so-called afterglow scheme has been developed to study the destabilization of Alfvén eigenmodes (AEs) by alpha particles and associated EP transport in the JET tokamak. In this work, the linear stability of AEs is discussed for the partial afterglow phase in a JET deuterium plasma discharge and for the full afterglow phase in a projected deuterium–tritium (DT) plasma. Thanks to recent upgrades in the tokamak transport code TRANSP, one can account for the contributions of different EP species to mode stability. Analysis of deuterium plasmas shows that AE growth rates are extremely sensitive to the energy and distribution of fast ions. An increase in fast ion energy can lead to more unstable AEs. In the afterglow phase of projected DT plasmas, it is EPs that mostly drive the AEs. However, the drive by alpha particles is comparable to that by beam ions and their contribution to the net growth rate might be hard to separate. According to the discussed projections, the destabilization of AEs might be ineffective because the background plasma damping significantly exceeds the EP drive. In this case, the development of an alternative plasma scenario that allows us to overcome such damping would be required in future experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Pyrolysis_Molecular_Beam_Mass_Spectrometry_Analysis_of_Specific_Switchgrass_Genotypes

Select natural variant switchgrass genotypes grown in Tifton, GA were analyzed by Pyrolysis-Molecular Beam Mass Spectrometry (Py-MBMS). Biomass was harvested, milled, several genotypes were analyzed with and without being destarched and extracted with ethanol prior to analysis (indicated with -DE if destarched and extracted). Py-MBMS analysis was conducted using approximately 4 mg of biomass and each sample was analyzed in duplicate. A Frontier PY2020 unit pyrolyzed samples at 500°C for 30 s in 80 µL deactivated stainless steel cups. An Extrel Super-Sonic MBMS Model Max 1000 was used to collect mass spectral data fromm/z30 to 450 at 17 eV and processed using Merlin Automation software (V3). Spectral ion intensities were normalized to the total ion chromatogram signal for each sample for analysis of spectral variance. Lignin content (wt %) was estimated based on relative responses from standards of known Klason lignin content using mean-normalized ion intensities ofm/z120, 124 (G), 137 (G), 138 (G), 150 (G), 152, 154 (S), 164 (G), 167 (S), 168 (S), 178 (G), 180, 181, 182 (S), 194 (S), 208 (S) and 210 (S) where G indicates guaiacyl-derived ions, S indicates syringyl-derived ions, and other ions either derive from other lignin monomers or multiple sources. Ratios of S and G lignin monomer units (S/G) were obtained by dividing the sum of S-based ions by the sum of G-based ions using mean-normalized ion intensities.

CBI↗
DOE OSTI2020

Ion beam irradiation of ABO4 compounds with the fergusonite, monazite, scheelite, and zircon structures

The effects of irradiation on CaWO4, SrWO4, BaWO4, YVO4, LaVO4, YNbO4, and LaNbO4 were investigated on thin crystals using 1.0 MeV Kr ions at 50-1000 K. All of the ABO4 compounds can be amorphized with calculated damage cross sections (σa = 1/Fc0) in the range of ~0.30-1.09 × 10-14 cm2 ion-1 at zero Kelvin. The analysis of fluence-temperature data returned critical temperatures for amorphization (Tc) of 311 ± 1, 358 ± 90, 325 ± 19, 415 ± 17, 541 ± 6, 636 ± 26, and 1012 ± 1 K, respectively, for the compounds listed above. Compared with previous in situ irradiation of ABO4 orthophosphate samples using 0.8 MeV Kr ions, the Tc values of LaVO4 and YVO4 are higher than those of LaPO4 and YPO4 by 82 K and 124 K, respectively. The Tc values of the three scheelite structures, CaWO4, SrWO4, and BaWO4, indicate that they are the most radiation tolerant compounds under these conditions. The A-B cation anti-site energies, EfAB, determined by DFT range from 2.48 to 10.58 eV and are highly correlated with the A-B cation ionic radius ratio, rA/rB, but are not correlated with Tc across the different structure types, suggesting that the formation and migration energies of Frenkel defects play a more important role in damage recovery in these compounds. We also discuss the role of cation and anion charge/iconicity as determined by DFT. ABO4 compounds with the zircon structure and B = P or V have a distinct advantage over those with B = Si as the damaged regions do not appear to be significantly affected by polymerization of (PO4) 3- or (VO4) 3- groups which might stabilize the amorphous fraction and ultimately lead to phase separation as observed in zircon (ZrSiO4).

amorphization↗
DOE OSTI2023

Advanced Analytical Methodologies Enable Feedstock Screening and Correlation to Pyrolysis Yields and Catalytic Upgrading

Pyrolysis of lignocellulosic biomass can serve as a powerful pathway for the generation of renewable fuels and industrial products. However, procurement of some biomass may be costly, especially when there is competition for alternative uses. Forestry and agricultural byproducts may serve as valuable pyrolysis feedstocks due to their high availability and low cost. Although waste products may fill demand for affordable pyrolysis feedstocks, they are often high in ash and extractives which contribute to unfavorable changes in pyrolysis vapor composition, as well as end products. The work presented here investigates the correlations between various pine anatomical fractions to understand their effect on pyrolysis oil composition for forest residues. Analytical pyrolysis coupled to direct analysis by molecular beam mass spectrometry (MBMS) provides real-time monitoring of pyrolysis vapor composition, even for compounds that are not amenable to gas chromatography. Statistical analysis of MBMS data from the fast pyrolysis (FP) of clean pine, cambium, twigs and branches, needles, bark, and a forest residue samples revealed that bark and needles made the greatest differences in the vapor composition of forest residues during pyrolysis and were enriched in resin acids, furfural derivatives, and ions that have been previously observed from catalysis corresponding to ash content. These results were also compared to catalytic fast pyrolysis (CFP) using a platinum on titania catalyst, and correlations between FP and CFP products were observed for the anatomical fractions. The forest residues and corresponding anatomical fractions from a stand of 23-year-old pine will be converted by fast pyrolysis in a bench-scale 2-inch fluidized-bed reactor, and statistical correlations between the bench-scale products and analytical-scale pyrolysis vapors will be shown. This work highlights the power of advanced analytical methodologies in determining the contributions of vapor components to catalytic pyrolysis outcomes for mixed feedstocks and demonstrates the use of analytical methodologies to better screen feedstocks prior to pyrolysis.

analytical↗
DOE OSTI2022

Power balance analysis at the L-H transition in JET-ILW NBI-heated deuterium plasmas

The understanding of the physics underlying the L-H transition has strong implications for ITER experimental reactor and demonstration power plant (DEMO). In many tokamaks, including JET, it has been observed that, at a particular plasma density, n e,min , the power necessary to access H-mode P L-H is minimum. In the present work, L-H transitions of JET deuterium plasmas heated by neutral beam injection (NBI) are studied for the first time by means of a power balance analysis to characterize the main contributions in the transition, through integrated transport modelling. In the pulses analysed, we do observe a minimum of the L-H power threshold in density, indicating the presence of density branches and of n e,min . Electron and ion heat fluxes at the transition are estimated separately. The electron/ion equipartition power results in favour of the ions, as shown by QuaLiKiz quasilinear gyrokinetic simulations, which predict a larger ion transport that causes T e > T i . The resulting edge ion heat flux also shows a clear change of slope below n e,min , similarly to ASDEX-Upgrade (AUG) NBI pulses (Ryter et al 2014 Nucl. Fusion 54 083003). JET NBI data are compared to radio-frequency heated AUG and Alcator C-mod pulses (Schmidtmayr et al 2018 Nucl. Fusion 58 056003), showing a different trend of the power, coupled to ions at the L-H transition with respect to the linearity observed in the radio-frequency heated plasmas. Finally, the presence of n e,min and the role of the ion heat flux is discussed in the paper, although it seems it is not possible to explain the presence of a P L-H minimum in density by a critical ion heat flux and by the equipartition power for the JET NBI-heated plasmas analysed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Machine Learning Characterization of Alfvénic and Sub-Alfvénic Chirping and Correlation With Fast-Ion Loss at NSTX

Abrupt large events in the Alfvenic and sub-Alfvenic frequency bands in tokamaks are typically correlated with increased fast ion loss. Here, machine learning is used to speed up the laborious process of characterizing the behaviour of magnetic perturbations from corresponding frequency spectrograms that are typically identified by humans. Analysis allows for comparison between different mode character (such as quiescent, fixedfrequency, chirping, avalanching) and plasma parameters obtained from the TRANSP code such as the ratio of the neutral beam injection (NBI) velocity and the Alfven velocity (v inj. /v A ), the q-profile, and the ratio of the neutral beam beta and the total plasma beta (β beam,i /β). In agreement with previous work by Fredrickson et al., in this work, we find correlation between β beam,i and mode character. In addition, previously unknown correlations are found between moments of the spectrograms and mode character. Character transition from quiescent to non-quiescent behaviour for magnetic fluctuations in the 50 - 200 kHz frequency band is observed along the boundary v Φ ≲ (1/4) (v inj. - 3v A ) where v Φ is the rotation

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2018

Novel Applications of Focused Ion Beam Technique for Planetary Sample Analyses

We are using innovative FIB techniques to prepare samples of planetary materials for different types of coordinated analyses using ion microprobes, synchrotron beamlines, and specialized transmission electron microscopy (TEM) techniques. In these cases, the FIB sample preparation is the critical step in enabling these specialized analyses. We discuss several examples below utilizing the FEI Quanta3D instrument at the NASA Johnson Space Center. Trace element analyses utilizing synchrotron x-ray fluorescence. The trace element content of mineral grains in comet dust provides important clues on their formation and processing in the early solar system. We preformed coordinated analyses of a comet dust particle that had been prepared using ultramicrotomy for TEM analysis. Following the TEM analyses, we extracted a 70 nm thick section from a region of the carbon (C) film of the TEM grid, for additional analyses. A carbon ring ~2-3 μm thick was deposited on top of the C film using the FIB. The C film on the outer rim of the ring was milled away using various patterns to uniformly release the stresses on the film, preventing rupture and collapse, and was attached to the micromanipulator needle. We then isolated the ring completely and transferred the section to a silicon sample holder for analysis using the HXN (hard X-ray nanoprobe) beamline at NSLSII at Brookhaven National Lab. Coordinated Analyses of Presolar Grains. Rare sub-m presolar grains that originate in evolved stars and supernovae, occur in primitive astromaterials and are identified by their exotic isotopic compositions. Coordinated analyses of these grains using NanoSIMS, TEM, and other techniques on the same grain is enabled by innovative FIB sample preparation. In order to obtain subsequent isotopic analyses of Mg and Fe, contributions from surrounding grains were minimized. We precisely deposited a protective cap of Pt on top of the grain to preserve the grain of interest and then milled away about 5 μm diameter of the surrounding material. Following the isotopic analyses, the spindle was extracted and thinned to electron transparency for TEM microstructural analyses. In situ heating TEM experiments on lunar samples. We extracted a FIB thin section from Apollo 17 lunar rock 76015. To avoid ion-beam damage, e-beam deposition was used to deposit the first 500 nm of the C strap, followed by ion beam-assisted deposition of ~3 μm carbon. We performed an ex situ lift-out of the section and placed the section on one of the elements of a microelectromechanical systems (MEMS) - specialized heating substrate and attached the section to the substrate by depositing small C straps with the FIB. The heating chips utilize silicon nitride windows to support the samples and provide uniform heating while enabling TEM imaging. The heating chip was loaded into a Hitachi “Blaze” heating holder and analyzed using a Hitachi HF5000 at the University of Arizona.

Rahman, Z.↗
DOE OSTI2023

Rapid screening of secondary aromatic metabolites in Populus trichocarpa leaves

Abstract Background High-throughput metabolomics analytical methodology is needed for population-scale studies of bioenergy-relevant feedstocks such as poplar ( Populus sp.). Here, the authors report the relative abundance of extractable aromatic metabolites in Populus trichocarpa leaves rapidly estimated using pyrolysis-molecular beam mass spectrometry (py-MBMS). Poplar leaves were analyzed in conjunction with and validated by GC/MS analysis of extracts to determine key spectral features used to build PLS models to predict the relative composition of extractable aromatic metabolites in whole poplar leaves. Results The Pearson correlation coefficient for the relative abundance of extractable aromatic metabolites based on ranking between GC/MS analysis and py-MBMS analysis of the Boardman leaf set was 0.86 with R 2 = 0.76 using a simplified prediction approach from select ions in MBMS spectra. Metabolites most influential to py-MBMS spectral features in the Clatskanie set included the following compounds: catechol, salicortin, salicyloyl-coumaroyl-glucoside conjugates, α-salicyloylsalicin, tremulacin, as well as other salicylates, trichocarpin, salicylic acid, and various tremuloidin conjugates. Ions in py-MBMS spectra with the highest correlation to the abundance of extractable aromatic metabolites as determined by GC/MS analysis of extracts, included m/z 68, 71, 77, 91, 94, 105, 107, 108, and 122, and were used to develop the simplified prediction approach without PLS models or a priori measurements. Conclusions The simplified py-MBMS method is capable of rapidly screening leaf tissue for relative abundance of extractable aromatic secondary metabolites to enable prioritization of samples in large populations requiring comprehensive metabolomics that will ultimately inform plant systems biology models and advance the development of optimized biomass feedstocks for renewable fuels and chemicals.

09 BIOMASS FUELS↗
NASA NTRS1995

Nature and location of the source of plasma sheet boundary layer ion beams

Onsager et al. (1991) have put forward a model of the formation of the plasma sheet boundary layer (PSBL) which relies on a steady source of plasma from a spatially extended plasma sheet, together with steady equatorward and earthward ExB convection of field lines due to reconnection at a downtail neutral line. This model is a synthesis of earlier proposals and it explains such features as an electron layer exterior to the ion boundary layer, ion velocity dispersion, counter streaming beams, low-speed cutoffs in the beams. It also explains the apparent evolution of the ion beams through 'kidney bean' shaped velocity-space distributions toward quasi-isotropic shells without invoking pitch angle scattering or energy diffusion. In this paper we explore two ramifications of the model. In principle we can map, as a function of time, the downtail neutral line distance and establish whether or not it is retreating during substorm recovery. We can also reconstruct the plasma distribution function near the neutral line to see if it is most consistent with mantle or plasma sheet plasma. We perform this analysis using International Sun Earth Explorer (ISEE) Fast Plasma Experiment (FPE) data for two plasma sheet recovery events, one on March 1, 1978, and the other on April 18, 1978. On March 1, 1978, we find evidence for an initial retreat from around 110 to 160 R(sub E) in the first 15 min; little further retreat occurs thereafter. On April 18, 1978, the neutral line location ranges from as little as 40 R(sub E) tailward of the satellite to as much as 200 R(sub E), but there is no evidence for a systematic retreat. The reconstructed ion distributions for these events are most consistent with a plasma sheet origin for the March 1 case and possibly plasma mantle or low-latitude boundary layer for the April 18 case.

Elphic, R. C.↗
DOE OSTI2023

Kinetic modeling of solitary wave dynamics in a neutralizing ion beam

In this work, we characterize the formation and evolution of electrostatic solitary waves (ESWs) in the space-charge neutralization of ion beams using particle-in-cell simulations. These waves become excited when the electrons emitted from an external filament source initiate a two-stream instability in the beam. We show that such electrostatic waves become excited in both two-dimensional (2D) and three-dimensional (3D) beams with different shapes and sizes. Through a 1D Bernstein–Greene–Kruskal (BGK) analysis of the 2D beam, we find that the non-Maxwellian nature of the beam electrons gives rise to large-sized ESWs that are not predicted by BGK theory since it assumes a Maxwellian electron velocity distribution in the beam. Finally, we show that a 1D BGK theory is inadequate to describe ESWs in 3D beams because of complex electron trajectories.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1985

Real-time measurement of sodium chloride in individual aerosol particles by mass spectrometry

The method of particle analysis by mass spectrometry has been applied to the quantitative measurement of sodium chloride in individual particles on a real-time basis. Particles of known masses are individually introduced, in the form of a beam, into a miniature Knudsen cell oven (1600 K). The oven is fabricated from rhenium metal sheet (0.018 mm thick) and is situated in the ion source of a quadrupole mass spectrometer. A particle once inside the oven is trapped and completely volatilized; this overcomes the problem of partial volatilization due to particles bouncing from the filament surface. Individual particles are thermally volatilized and ionized inside the rhenium oven, and produce discrete sodium ion pulses whose intensities are measured with the quadrupole mass spectrometer. An ion pulse width of several milliseconds (4-12 ms) is found for particles in the mass range 1.3 x 10 to the -13th to 5.4 x 10 to the -11th g. The sodium ion intensity is found to be proportional to the particle mass to the 0.86-power. The intensity distribution for monodisperse aerosol particles possesses a geometric standard deviation of 1.09, showing that the method can be used for the determination of the mass distribution function with good resolution in a polydisperse aerosol.

Sinha, M. P.↗