Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “insertion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Targeted synthesis and reaction mechanism discussion of Mo 2 C based insertion-type electrodes for advanced pseudocapacitors

Mo 2 C is one of the few compounds that possess good electronic conductivity. Meanwhile, it possesses a natural 1D zigzag tunnel structure that is ideally suited for fast ion diffusion. Here, an effective approach is demonstrated for fabrication of structurally stable N-doped Mo 2 C/C nanobelts. They demonstrate high and fast energy storage ability with initial capacitances of 1139 C g -1 at 1 mV s-1, 151 C g -1 at an extremely high scan rate of 2000 mV s -1 and 208 C g -1 at a discharge current density of 200 A g -1 . After electrochemical activation of cycling, the capacity is continuously enhanced and much higher capacitances of 2523 C g -1 at 1 mV s -1 and 1403 C g -1 at 50 A g -1 are achieved after 15,000 cycles at 50 mV s -1 . Using the power law, it is evaluated that a surface-controlled capacitive process makes the main contribution to the capacity, which is over 90% when the scan rates are higher than 10 mV s -1 and still high as 73% at 1 mV s -1 . From in situ synchrotron XRD, it is found that there is a negligible change in the crystal structure and volume during charging/discharging, reflecting an insertion-type charge storage mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing borafluorene B–C bond insertion with gold acetylide and azide

In this study, the reaction of Ph 3 PAuN 3 with 9-Ph-9-borafluorene resulted in complexation of the azide to boron while a gold acetylide reacted with 9-Ph-9-borafluorene to insert the acetylide carbon to access a six-membered boracycle with an exocyclic double bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation Of Plasma Discharges Within Maja-PF Device Operated With Tungsten Inserts In The Central Electrode

The paper presents results of recent experimental studies with a MAJA-PF plasma-focus facility, as carried out for two different configurations of the end-plate of the central electrode. The main aim was to investigate an influence of the shape and material of the electrode end-plate on the formation and structure of the plasma column as well as to record and identify spectral lines of tungsten. The first version of the end-plate was made of Cu, while the second one had an insert made of a Cu-W alloy. Optical spectra were recorded by means of a Mechelle 900 spectrometer, operated with some delay in relation to a current peculiarity and with exposition times varied from 200 ns to 10 {mu}s. For shots with the Cu electrode spectral lines of deuterium (working gas) and carbon ions were recorded, but tungsten lines were not identified. It was estimated that the electron concentration changed from (8 divide 10)x10{sup 17} cm{sup -3} to about 2x10{sup 17} cm{sup -3} in 5 {mu}s after the current dip. In experiments with the second electrode version, among numerous spectral lines there were identified distinct WI and WII lines. Estimates of the tungsten ion concentration were impossible because of close positions of other lines. Diagrams of changes in the electron density are of importance for applications of DPM streams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An Algorithm for the Optimization of Insertion Devices to Increase Useful Flux and to Decrease Useless Radiation Power

A continuous spectrum of synchrotron radiation in the hard x-ray region, 5-20 keV, is necessary for the special demand of users, but the high radiation power in that continuous spectrum adversely affects the design of optical components in the beam line. A compromise between photon flux and radiation power of insertion devices should hence be considered. An algorithm and code for spectrum optimization was hence developed using program Mathematica. A wiggler-like undulator with a continuous spectrum was investigated with this code. An optimization algorithm for continuous spectra in the energy range 5-20 keV is presented, and features of the wiggler-like undulator with a continuous spectrum are discussed herein.

43 PARTICLE ACCELERATORS↗

Characterizations and Applications of the Insertion Device of the SPring-8 Diagnostics Beamline II

An insertion device (ID05) of the SPring-8 diagnostics beamline II (BL05SS) was characterized from the aspects of both the magnetic field performance and the spectral performance as a high K wiggler, which was confirmed to have the field performance with the rms phase error less than 2 degree. Meanwhile, the spectral performance of ID05 as an undulator with small K was also investigated by the energy spectrum measurements. The rms phase error less than 2degree leads us to apply the wiggler radiation on the higher harmonics to the beam diagnostics. We successfully demonstrated an application to the energy-spread diagnostics of electron beam using the 19th harmonics.

43 PARTICLE ACCELERATORS↗

Magnetostructural Influences of Thin Mg Insert Layers in Crystalline CoFe(B)/MgO/CoFe(B) Magnetic Tunnel Junctions

It is common to find a thin ({approx}0.5 nm) layer of Mg deposited prior to the MgO tunnel barrier in crystalline CoFe(B)/MgO/CoFe(B) magnetic tunnel junctions, due to the improved device performance that results. However, despite their common usage, the reasons why such layers are effective are unclear. We use structures that model the lower electrode of such devices to show that a suitably thick Mg insert layer enhances the crystal quality of both MgO and CoFe(B), permits interfacial oxides to reduce back to a metallic ferromagnetic state, and hence improves magnetic switching of the CoFe(B) electrode, properties which are inextricably linked to device performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fully epitaxial Fe/MgO/Fe(001) junctions with nonmagnetic metal layer insertion

Fully epitaxial Fe/Ag-wedge/MgO/Fe(001) magnetic tunnel junctions (MTJs) were prepared by using a combination of magnetron sputtering and molecular beam epitaxy, and their magneto-transport properties were investigated for the Ag thickness range of 0-9 monolayer (ML). The large tunneling magnetoresistance (TMR) ratios of up to 160% at room temperature were obtained in the Fe/MgO/Fe region (Ag: 0 ML) after the optimization of the preparation conditions. The finite TMR ratio was observed until the Ag thickness reached 4 ML, although no significant oscillation due to quantum well states (QWS) was seen. This is the first demonstration of TMR in the fully epitaxial MTJs with nonmagnetic metal layer insertion which can potentially create spin-dependent QWS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical investigation of InAs quantum dots inserted in AlGaAs/GaAs modulation doped heterostructure

Optical properties of InAs quantum dots (QDs) inserted in AlGaAs/GaAs modulation doped heterostructure are investigated. To study the effect of carrier transfer behavior on the luminescence of self-assembled quantum dots, a series of sample has been prepared using molecular beam epitaxy (Riber 32 system) in which we have varied the thickness separating the delta dopage and the InAs quantum dots layer. Photoluminescence spectra show the existence of two peaks that can be attributed to transition energies from the ground state (E{sub 1}-HH{sub 1}) and the first excited state (E{sub 2}-HH{sub 2}). Two antagonist effects have been observed, a blue shift of the emission energies result from electron transferred from the AlGaAs/GaAs heterojunction to the InAs quantum dots and a red shift caused by the quantum confined Stark effect due to the internal electric field existing In the AlGaAs/GaAs heterojunction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Realization of compressively strained GaN films grown on Si(110) substrates by inserting a thin AlN/GaN superlattice interlayer

We investigate the strain properties of GaN films grown by plasma-assisted molecular beam epitaxy on Si(110) substrates. It is found that the strain of the GaN film can be converted from a tensile to a compressive state simply by inserting a thin AlN/GaN superlattice structure (SLs) within the GaN film. The GaN layers seperated by the SLs can have different strain states, which indicates that the SLs plays a key role in the strain modulation during the growth and the cooling down processes. Using this simple technique, we grow a crack-free GaN film exceeding 2-{mu}m-thick. The realization of the compressively strained GaN film makes it possible to grow thick GaN films without crack generation on Si substrates for optic and electronic device applications.

36 MATERIALS SCIENCE↗

Theoretical prediction of rare gas inserted hydronium ions: HRgOH{sub 2}{sup +}

A possibility of existence of new species through insertion of a rare gas atom in hydronium ion resulting into HRgOH{sub 2}{sup +} cation (Rg = He, Ar, Kr, and Xe) has been explored by using various ab initio quantum chemical techniques. Structure, harmonic vibrational frequencies, stability, and charge distribution of HRgOH{sub 2}{sup +} species as obtained using density functional theory, second order Moller-Plesset perturbation theory, and coupled-cluster theory based methods are reported in this work. All the calculated results suggest that the HRgOH{sub 2}{sup +} species are stable enough with respect to all the dissociation channels, except the 2-body dissociation path (H{sub 3}O{sup +}+ Rg). Nevertheless, this 2-body dissociation channel connected through the relevant transition state is associated with a finite barrier, which in turn would prevent the metastable species in transforming to global minimum products. The calculated values of topological properties within the framework of quantum theory of atoms-in-molecules are found to be consistent with the bond length values. Structural and energetic parameters clearly suggest that it might be possible to prepare and characterize the HRgOH{sub 2}{sup +} species (except HHeOH{sub 2}{sup +}) using electron bombardment matrix isolation technique in a way similar to that of the preparation of (Rg{sub 2}H){sup +} or mixed (RgHRg{sup Prime }){sup +} cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗