Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hot wire”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Fluctuating disturbances in a Mach 5 wind tunnel

An experimental investigation has been conducted to determine the source and nature of disturbances in the settling chamber and test section of a Mach 5 wind tunnel. Various changes in the air supply piping to the wind tunnel are shown to influence the disturbance levels in the settling chamber. These levels were reduced by the use of an acoustic muffler section in the settling chamber. Three nozzles were tested with the same settling chamber and hot-wire measurements indicated that the test section disturbances were entirely acoustic. Significant reductions in the test section noise levels were obtained with an electroplated nozzle utilizing boundary-layer removal upstream of the throat. The source of test section noise is shown to be different for laminar and turbulent nozzle-wall boundary layers.

Anders, J. B.↗
NASA NTRS1976

Turbulence measurement in transonic flow

The paper examines the response of a hot-wire anemometer in transonic flow in a variable-density closed-circuit wind tunnel and presents measurements obtained in a transonic turbulent boundary layer. Typical calibration curves are shown which indicate that, in contrast to previous work, the wire can be operated in a condition that will allow a single sensitivity to the velocity-density product rather than to density and velocity independently. Using these calibrations, measurements of fluctuating density and velocity obtained in a 0.8 M turbulent boundary layer are obtained. Agreement with independently obtained velocity fluctuations justifies both the calibration and data reduction procedures.

Rose, W. C.↗
NASA NTRS1976

Sound generated in the vicinity of the trailing edge of an upper surface blown flap

Far-field noise data indicated that for practical upper surface blown flap configurations, the noise radiated below the flap is dominated by the noise generated in the vicinity of the trailing edge. Sound field by turbulent mixing in the trailing edge wake is investigated experimentally and theoretically. Hot-wire measurements were made downstream of the trailing edge to determine the gross turbulence mixing characteristics of the flow. This information is used as input to a theoretical analysis of the sound field. Favorable agreement is found between predicted and measured far-field noise directivities at various frequencies and noise power spectra at various directions.

Tam, C. K. W.↗
NASA NTRS1976

An experimental and computational investigation of the flow field about a transonic airfoil in supercritical flow with turbulent boundary-layer separation

A combined experimental and computational research program for testing and guiding turbulence modeling within regions of separation induced by shock waves incident on turbulent boundary layers is described. Specifically, studies are made of the separated flow over the rear portion of an 18%-thick circular-arc airfoil at zero angle of attack in high Reynolds number supercritical flow. The measurements include distributions of surface static pressure and local skin friction. The instruments employed include high-frequency response pressure cells and a large array of surface hot-wire skin-friction gages. Computations at the experimental flow conditions are made using time-dependent solutions of ensemble-averaged Navier-Stokes equations, plus additional equations for the turbulence modeling.

Rubesin, M. W.↗
NASA NTRS1976

Evaluation of mean and turbulent velocity measurements in subsonic accelerated boundary layers

Exploratory measurements of the mean and turbulent flow in the wall boundary layer of a 15.2- by 10.2-cm channel were obtained as part of an instrumentation development program for measurements in compressible flow. Mean surface and flow field surveys were obtained at channel Mach numbers ranging from 0.2 to 0.9. The mean velocity distributions were obtained with total pressure probes and a laser velocimeter. At a channel Mach number of 0.2, several types of hot-wire probes were used to obtain both velocity fluctuations and Reynolds shear-stress results.

Sandborn, V. A.↗
NASA NTRS1976

An experimental study of a self-confined flow with ring-vorticity distribution

A new form of self-confined flow was investigated in which a recirculation zone forms away from any solid boundary. An inviscid flow analysis indicated that in a purely meridional axisymmetric flow a stationary, spherical, self-confined region should occur in the center of a streamlined divergent-convergent enlargement zone. The spherical confinement region would be at rest and at constant pressure. Experimental investigations were carried out in a specially built test apparatus to establish the desired confined flow. The streamlined divergent-convergent interior shape of the test section was fabricated according to the theoretical calculation for a particular streamline. The required inlet vorticity distribution was generated by producing a velocity profile with a shaped gauze screen in the straight pipe upstream of the test section. Fluid speed and turbulence intensity were measured with a constant-temperature hot-wire anemometer system. The measured results indicated a very orderly and stable flow field.

Lin, K. M.↗
NASA NTRS1976

Measurements in the mixing region of a turbulent jet in a coflowing airstream

The mixing region of a turbulent jet is an important example of an intermittent turbulent shear flow. There are a great deal of interest in this region because of interest in jet noise and STOL aircraft which use upper surface blowing or externally blown flap configurations to increase lift. A detailed study of the one point statistical properties of a smoke laden jet was made using a combination of a laser velocimeter and a light scattering system. The jet, with a 14 to 1 contraction, was placed inside a wind tunnel where the ratio of the jet exit velocity to free stream was 5.1 to 1. All measurements are made for a jet Reynolds number of 22,600. Among the quantities measured are mean axial and radial velocities, axial and radial intensities, power spectra, mean smoke concentration, concentration intensities, concentration spectra, intermittencies and velocity-concentration correlations. The results are compared with hot-wire data where available.

Morton, J. B.↗
NASA NTRS1977

Merging of aircraft trailing vortices

A merging-distance criterion for equal-strength corotational vortices is derived from low-turbulence wind-tunnel flow-visualization data. The vortex separation distance is normalized by defining a vortex core diameter based on circulation defect and angular-momentum defect. Merging may take place for larger separation distances than predicted from earlier two-dimensional inviscid calculations, which indicates that viscosity and possibly three-dimensional effects are important factors in the merging phenomenon. Hot-wire velocity distributions and rolling-moment measurements show that attenuation of the vortex hazard is associated with vortex merging.

Brandt, S. A.↗
NASA NTRS1977

Turbulence measurements in axisymmetric supersonic boundary layer flow in adverse pressure gradients

Mean flow and turbulence measurements are presented for adiabatic compressible turbulent boundary layer flow in adverse pressure gradients. The gradients were induced on the wall of an axially symmetric wind tunnel by contoured centerbodies mounted on the wind tunnel centerline. The boundary layer turbulence downstream of a boundary layer bleed section in a zero pressure gradient was also examined. The measurements were obtained using a constant temperature hot-wire anemometer. The adverse pressure gradients were found to significantly alter the turbulence properties of the boundary layer. With flow through the bleed holes there was a measureable decrease in the rms longitudinal velocity fluctuations near the wall and the turbulent shear stress in the boundary layer was reduced.

Gootzait, E.↗
NASA NTRS1977

Jet noise source modification due to forward flight

The effects of forward flight on the turbulence characteristics of a jet in a co-flowing stream have been determined for a 2.22 inch circular jet in a 36 inch free jet wind tunnel. The nozzle exit velocity was 400 ft/sec, and the tunnel velocity was set at 0, 40, 120 and 200 ft/sec. Measurements of flow properties including mean velocity, turbulence intensity and spectra, convection velocity, integral length scale, and convected integral time scale were carried out using two linearized hot wires. Results were used to predict changes due to flight in the jet acoustic sources. The noise reductions for a cold jet with a velocity of 1000 ft/sec, due to the change in acoustic sources in flight, agreed well at all angles with measured noise reductions.

Larson, R. S.↗
NASA NTRS1977

Vortices induced in a stagnation region by wakes - Their incipient formation and effects on heat transfer from cylinders

Horseshoe-like vortices, induced by wakes in the stagnation region of bluff bodies, are proposed as an efficient mechanism for augmentation of convective heat transfer. The vortex 'flow module' induced by single or multiple wakes, which had not been observed previously, was first documented and the resulting flow field was studied using various visualization techniques and hot-wire anemometry. In an attempt to understand the driving force behind this flow module, the conditions at which incipient formation of the vortices occurs were investigated. Existence of such a threshold is essential and was hitherto an open question in analytical studies of stability of flow in stagnation region. Finally, effects of the flow module on heat transfer from a cylinder were measured.

Nagib, H. M.↗
NASA NTRS1977

Measurements in the turbulent boundary layer with slot injection of helium

Hot-wire anemometry and digital techniques are used to develop time series for the streamwise and transverse velocity components and for the mass fraction of helium in the low-speed turbulent boundary layer of air involving the slot injection of helium. Profiles are developed at several streamwise stations. In the present contribution the data are presented principally in terms of conventional, unconditioned averages. It is found that the mean velocity and concentration profiles develop in the downstream direction in the expected fashion but that the intensities of the velocity, concentration, and density fluctuations increase sharply downstream of the slot and peak in the region where the mixing region from the splitter plate impinges on the wall. Close to the wall where the helium concentration is relatively high counterfluxes of helium are found.

Larue, J. C.↗
NASA NTRS1977

Active control of spacecraft charging on ATS-5 and ATS-6

Effects on spacecraft ground potential of active emission of charged particles are being investigated through experiments using the ATS-5 and ATS-6 spacecraft. Each spacecraft is equipped with ion engine neutralizers which emit low energy charged particles. Despite great differences in design between the two spacecraft, they attain similar potentials in similar environments. Therefore, effects on spacecraft potential of neutralizer operations can be used to compare the effects of operating the two different neutralizers (hot wire filament and plasma bridge). The neutralizers on both spacecraft were operated in eclipse. Results of these operations are presented and spacecraft responses compared.

Purvis, C. K.↗
NASA NTRS1977

Acoustics-turbulence interaction

An investigation of the instability frequency was undertaken. Measurements revealed that the hot wire probe induces and sustains stable upstream oscillation of the free shear layer. The characteristics of the free shear layer tone are found to be different from the slit jet wedge edgetone phenomenon. The shear tone induced by a plane wedge in a plane free shear layer was then examined in order to further document the phenomenon. The eigenvalues and eigenfunctions of the tone fundamental show agreement with the spatial stability theory. A comprehensive summary of the results is also included.

Hussain, A. K. M. F.↗
NASA NTRS1977

Experimental clean combustor program: Turbulence characteristics of compressor discharge flows

The results of turbulence measurements at the entrance to the diffuser duct of a large gas turbine are presented. Hot film and hot wire measurements were conducted over a compressor discharge temperature range of 450K to 608K. It was found that the turbulent intensity at the I.D. and midspan locations increases gradually from 6 + or - 1 percent at idle to 7 + or - 1 percent at approach; the turbulent intensity at the O.D. location increases from 7.5 + or - 0.5 percent at idle to 15 + or - 0.5 percent at approach. The energy in the velocity waves is uniformly distributed over a 0.1 to 5 kHz bandwidth, and the cut-off frequency is not a strong function of the engine operation. The axial length of the Fourier components within this bandwidth varies from 0.021 to 1.05m. The turbulence near the diffuser O.D. is of sufficient amplitude and scale to affect the flow to the front end sections of the burner.

Follansbee, P. S.↗
NASA NTRS1978

Dynamic stall experiments on the NACA 0012 airfoil

The flow over a NACA 0012 airfoil undergoing large oscillations in pitch was experimentally studied at a Reynolds number of and over a range of frequencies and amplitudes. Hot-wire probes and surface-pressure transducers were used to clarify the role of the laminar separation bubble, to delineate the growth and shedding of the stall vortex, and to quantify the resultant aerodynamic loads. In addition to the pressure distributions and normal force and pitching moment data that have often been obtained in previous investigations, estimates of the unsteady drag force during dynamic stall have been derived from the surface pressure measurements. Special characteristics of the pressure response, which are symptomatic of the occurrence and relative severity of moment stall, have also been examined.

Mcalister, K. W.↗
NASA NTRS1977

Mean Velocity, Turbulence Intensity and Turbulence Convection Velocity Measurements for a Convergent Nozzle in a Free Jet Wind Tunnel. Comprehensive Data Report

The effect of flight on the mean flow and turbulence properties of a 0.056m circular jet were determined in a free jet wind tunnel. The nozzle exit velocity was 122 m/sec, and the wind tunnel velocity was set at 0, 12, 37, and 61 m/sec. Measurements of flow properties including mean velocity, turbulence intensity and spectra, and eddy convection velocity were carried out using two linearized hot wire anemometers. This report contains the raw data and graphical presentations. The final technical report includes a description of the test facilities, test hardware, along with significant test results and conclusions.

Mccolgan, C. J.↗
NASA NTRS1978

Mean velocity, turbulence intensity and turbulence convection velocity measurements for a convergent nozzle in a free jet wind tunnel

The effect of light on the mean flow and turbulence properties of a 0.056 m circular jet were determined in a free jet wind tunnel. The nozzle exit velocity was 122 m/sec, and the wind tunnel velocity was set at 0, 12, 37, and 61 m/sec. Measurements of flow properties including mean velocity, turbulence intensity and spectra, and eddy convection velocity were carried out using two linearized hot wire anemometers. Normalization factors were determined for the mean velocity and turbulence convection velocity.

Mccolgan, C. J.↗