Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hardware and software”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Development of a FELIX based readout system for ITk strip hybrid module demonstrator for ATLAS Phase-II Upgrade

The Large Hadron Collider (LHC) will undergo a major upgrade around 2024 with a roughly tenfold increase in luminosity. It results in corresponding increases in particle rates and radiation doses that the current ATLAS Inner Tracking Detector cannot cope with. Therefore the ATLAS experiment will build a new all-silicon tracking system called the ITk (Inner Tracker) that includes an inside pixel detector close to the beam line and a strip detector in outside layer. Meanwhile the ATLAS experiment will adopt the Front-End Link eXchange (FELIX) system as the interface between the data acquisition and front-end electronics for all sub-detectors in the Phase II Upgrade. In this contribution, we present a prototype of FELIX based readout system for the strip hybrid module. Its hardware, firmware and software GUI application will be discussed, as well as integration test results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Hardware-based Advanced Electromagnetic Transient Simulation for A Large-Scale PV Plant in Real Time Digital Simulator

Power electronics-based resources, such as high-voltage direct current (HVdc) substations, photovoltaic (PV) plants, wind plants, electric vehicle charging stations, and energy storage systems, are increasingly being integrated within the power grid. Recently, multiple reports have emphasized the necessity for high-fidelity electromagnetic transient (EMT) simulations of these large-scale power electronics-based resources to accurately understand their behavior in power grids. However, performing hardware-based EMT simulations with high-fidelity models for such large power electronics systems is challenging due to the small time-step requirements and the involvement of a large number of states. This paper presents the implementation of hardware-based high-fidelity EMT dynamic model of a large-scale PV plant, accomplished through custom model development using the specific-C language in real-time digital simulator hardware (RTDS) and software (RSCAD).

Choi, Jongchan↗
DOE OSTI2024

Switching-cycle-based Startup for Grid-connected Inverters

Conventional inverter startups, or grid synchronization, are hindered by slow dynamics and inrush current issues, which impede the integration of more renewable energy resources into the power grid. This paper overcomes the barriers by introducing a novel switching cycle-based startup approach for grid-connected inverters, eliminating the need for voltage sensors and phase-locked loops (PLLs). The proposed method surpasses the bandwidth constraints of traditional PLL-based techniques and achieves grid synchronization in just two switching cycles. Relying solely on sensed three-phase currents, synchronization is accomplished without inrush currents or the need for additional hardware or increased software complexity, resulting in a faster inverter startup. The paper also presents a sensitivity analysis to discuss the impact of critical parameters on the method's accuracy. As a result, the effectiveness of the proposed technique is demonstrated through simulation and experimental results.

14 SOLAR ENERGY↗
DOE OSTI2021

Segmented Energy Routing for a Modular AC/DC Hybrid System

This article presents a modular ac/dc system with both distributed and centralized power ports for energy router (ER) applications. In each module of the described system, photovoltaic (PV) power generation units, battery-type energy storage (ES) units, and critical loads are connected to the cascaded H-bridge (CHB)-organized medium-voltage (MV) dc links, with fully distributed low-voltage (LV) dc power ports. Copies of modules share the centralized load bus and interact with an MV ac grid in parallel. Hybrid power port (HPO) assigns flexibility to the system but makes energy routings a necessity for stable operation. In this article, a segmented energy management strategy for the HPO-ER is proposed. In terms of the grid-side power transferring, the system ratings are intentionally designed to match significant power imbalance. Focally, a segmented energy management strategy is proposed to realize fully autonomous energy routing involving MV ac grid, distributed PV generations, distributed battery storages, and LV load. The system is proven to be stable using the derived impedance-based model considering the interaction between power blocks. The feasibility of the topology and control strategy is also verified through software simulation, laboratorial hardware prototype experiment, and hardware-in-the-loop (HIL) emulation.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Performance Portability in the Exascale Computing Project: Exploration Through a Panel Series

Performance portability is a critical issue for the Exascale Computing Project (ECP) because of nontrivial architectural differences between machines available today and those expected at exascale. Many ECP project teams are working toward performance portability, and would expect to benefit from sharing lessons learned, identifying gaps, and discovering opportunities for partnerships. To facilitate this communication, the IDEAS-ECP project partnered with the three focus areas of ECP (application development, software technology, and hardware and integration), and Department of Energy computing facilities, to lead a series of panel discussions on performance portability. The panels were organized around broadly common themes of algorithmic and data locality challenges. In this article, we describe the panel series, its objectives, and perspectives from the various areas of the project. Finally, we also discuss use cases that are distinctive, as well as conclusions drawn from the collective experience of the participants.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

WfBench: Automated Generation of Scientific Workflow Benchmarks

The prevalence of scientific workflows with high computational demands calls for their execution on various distributed computing platforms, including large-scale leadership-class high-performance computing (HPC) clusters. To handle the deployment, monitoring, and optimization of workflow executions, many workflow systems have been developed over the past decade. There is a need for workflow benchmarks that can be used to evaluate the performance of workflow systems on current and future software stacks and hardware platforms.We present a generator of realistic workflow benchmark specifications that can be translated into benchmark code to be executed with current workflow systems. Our approach generates workflow tasks with arbitrary performance characteristics (CPU, memory, and I/O usage) and with realistic task dependency structures based on those seen in production workflows. We present experimental results that show that our approach generates benchmarks that are representative of production workflows, and conduct a case study to demonstrate the use and usefulness of our generated benchmarks to evaluate the performance of workflow systems under different configuration scenarios.

Coleman, Taina↗
DOE OSTI2021

Scalable Comparative Visualization of Ensembles of Call Graphs

Optimizing the performance of large-scale parallel codes is critical for efficient utilization of computing resources. Code developers often explore various execution parameters, such as hardware configurations, system software choices, and application parameters, and are interested in detecting and understanding bottlenecks in different executions. They often collect hierarchical performance profiles represented as call graphs, which combine performance metrics with their execution contexts. The crucial task of exploring multiple call graphs together is tedious and challenging because of the many structural differences in the execution contexts and significant variability in the collected performance metrics (e.g., execution runtime). In this paper, we present Ensemble CallFlow to support the exploration of ensembles of call graphs using new types of visualizations, analysis, graph operations, and features. We introduce ensemble-Sankey , a new visual design that combines the strengths of resource-flow (Sankey) and box-plot visualization techniques. Whereas the resource-flow visualization can easily and intuitively describe the graphical nature of the call graph, the box plots overlaid on the nodes of Sankey convey the performance variability within the ensemble. Our interactive visual interface provides linked views to help explore ensembles of call graphs, e.g., by facilitating the analysis of structural differences, and identifying similar or distinct call graphs. Finally, we demonstrate the effectiveness and usefulness of our design through case studies on large-scale parallel codes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Reliability Analysis for Unreliable FSM Computations

Finite State Machines (FSMs) are fundamental in both hardware design and software development. However, the reliability of FSM computations remains poorly understood. This becomes increasingly critical as the technology scaling becomes more aggressive. Existing reliability analyses are mainly designed for generic computations and are unaware of the special error tolerance characteristics in FSM computations. In this work, we introduce RelyFSM – a state-level reliability analysis framework for FSM computations. By qualitatively reasoning about the transition structures in FSM computations, RelyFSM can precisely capture their inherent error tolerance. Basically, RelyFSM takes an FSM specification as input and analyzes its reliability for a specific execution. At the core of the analysis is a set of mathematical models that accurately define the behaviors of unreliable FSM executions. Our evaluation with a spectrum of FSM benchmarks confirms the accuracy and efficiency of RelyFSM in analyzing the reliability of real-world FSM computations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

OPET Firmware (Open PV Electrical Tool Firmware) [SWR-25-43]

The main application of OPET is long term performance measurements of PV devices in field or under controlled environmental conditions. This repository contains everything relating to the firmware of the OPET device including source code. If you are looking for the hardware or control software repositories, links are below: https://github.com/NREL/opet-hardware https://github.com/NREL/opet-control

McDanold, Byron [National Renewable Energy Laborat↗
DOE OSTI2020

OpenK: An Open Infrastructure for the Accumulation, Sharing and Reuse of High Performance Computing Knowledge

In high performance computing (HPC), often a wide range of knowledge about the particular domains, software applications, and hardware architectures are necessary for applying the right optimizations in the appropriate contexts. In today’s practice, however, such knowledge has been expressed and managed in an ad-hoc manner by each individual. Systematic accumulation, sharing and reuse of the knowledge across a broad community has been difficult. This paper introduces OpenK, an ontology-based open infrastructure for solving the problem. By centering around ontology – a generic knowledge representation – and extensible designs, it offers a promising support for lowering the barriers.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

TEMPI: An Interposed MPI Library with Canonical Representation of MPI Datatypes [Poster]

TEMPI provides a transparent non-contiguous data-handling layer compatible with various MPIs. MPI Datatypes are a powerful abstraction for allowing an MPI implementation to operate on non-contiguous data. CUDA-aware MPI implementations must also manage transfer of such data between the host system and GPU. The non-unique and recursive nature of MPI datatypes mean that providing fast GPU handling is a challenge. The same noncontiguous pattern may be described in a variety of ways, all of which should be treated equivalently by an implementation. This work introduces a novel technique to do this for strided datatypes. Methods for transferring non-contiguous data between the CPU and GPU depends on the properties of the data layout. This work shows that a simple performance model can accurately select the fastest method. Unfortunately, the combination of MPI software and system hardware available may not provide sufficient performance. The contributions of this work are deployed on OLCF Summit through an interposer library which does not require privileged access to the system to use

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Moore Machine Motion Controls Refurbishment Statement of Work and Specification

Diamond Turning Machines known as “Moore” machines are used in the production of Potassium diHydrogen Phosphate (KDP) optics required for the National Ignition Facility (NIF). These machines are owned by the Department of Energy, as provided by Lawrence Livermore National Security LLC (LLNS). Moore Machines 1 and 2 are located at the Gooch & Housego (G&H) facility in Highland Heights, OH. The existing Aerotech motion controllers, motor drivers/amplifiers, input/output (I/O) hardware, control computer, software user interface, human machine interface (HMI), cabling, and encoders are beyond service life and require replacement. This Statement of Work (SoW) defines the motion control system refurbishment requirements for the Moore diamond turning machines designated Moore 1 and Moore 2. The motion controls system design shall include a motion control computer, control software, motor drive amplifiers and controllers, linear scale encoders, rotary encoders, HMI, power distribution, emergency stop (E-Stop) and interlocks, cabling, switches, solenoids, transducers, sensors, actuators, ancillary system interfaces, and related components necessary for a complete machine tool control system. The Subcontractor shall include effort to standardize systems between the two machines if reasonably possible.

42 ENGINEERING↗
DOE OSTI2024

Assessment and Coordination of EVSE Cybersecurity Standards

Cybersecurity certification programs for Electric Vehicle Supply Equipment (EVSE) are fragmented due to no single certification covering all aspects of the device and additionally the existence of multiple programs and under different levels of regulation. These devices are also confronted by the intricate assembly of product software, firmware, and hardware. Devices contain both logical and physical interfaces. These multifaceted devices have vulnerabilities at many levels and interconnect with other potentially vulnerable systems including the electric vehicle, the cloud where data and payment information are stored, and the electric grid and electric grid equipment including utilities. Of the EVSE certification programs that are found, none are directly for the cybersecurity of EVSE. Many standards are for safety, specifically battery safety, some are cybersecurity standards for other types of equipment and can be modeled for EVSE. In specific, ISA/IEC 62443 is found to be significantly in line with EVSE security needs and will be used in future testing to certify EVSE and help guide the project to demonstrate where gaps exist, where strengths lie in the standard and how this can be used to lead the certification efforts in harmonizing EVSE cybersecurity standards. In addition, there are multiple efforts that are currently seeking to build EVSE standards or revise existing standards to address gaps. This effort is seeking to establish a cybersecurity program for EVSE that will inform customers and help increase the level of security across products and state EVSE procurements to achieve consistency across different jurisdictions.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Designing FAIR Workflows at OLCF: Building Scalable and Reusable Ecosystems for HPC Science

High Performance Computing (HPC) centers, such as the Oak Ridge Leadership Computing Facility (OLCF), provide advanced infrastructure that enables scientific research at extreme scale. These centers operate with unique hardware configurations, specialized software environments, and elevated security re quirements that differ substantially from what most users encounter on their local systems. As a result, users often develop customized digital artifacts that are tightly coupled to the specific configuration of a given HPC center. Although necessary, this practice can lead to significant duplication of effort as multiple users independently create similar solutions to common problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Graph Neural Networks for Charged Particle Tracking on FPGAs

The determination of charged particle trajectories in collisions at the CERN Large Hadron Collider (LHC) is an important but challenging problem, especially in the high interaction density conditions expected during the future high-luminosity phase of the LHC (HL-LHC). Graph neural networks (GNNs) are a type of geometric deep learning algorithm that has successfully been applied to this task by embedding tracker data as a graph—nodes represent hits, while edges represent possible track segments—and classifying the edges as true or fake track segments. However, their study in hardware- or software-based trigger applications has been limited due to their large computational cost. In this paper, we introduce an automated translation workflow, integrated into a broader tool called hls4ml , for converting GNNs into firmware for field-programmable gate arrays (FPGAs). We use this translation tool to implement GNNs for charged particle tracking, trained using the TrackML challenge dataset, on FPGAs with designs targeting different graph sizes, task complexites, and latency/throughput requirements. This work could enable the inclusion of charged particle tracking GNNs at the trigger level for HL-LHC experiments.

Elabd, Abdelrahman↗
DOE OSTI2023

Enabling control co-design of the next generation of wind power plants

Abstract. Layout design and wake steering through wind plant control are important and complex components in the design and operation of modern wind power plants. They are currently optimized separately, but with more and more computational and experimental studies demonstrating the gains possible through wake steering, there is a growing need from industry and regulating bodies to combine the layout and control optimization in a co-design process. However, combining these two optimization problems is currently infeasible due to the excessive number of design variables and large solution space. In this article, we present a method that enables the coupled optimization of wind power plant layout and wake steering with no additional computational expense than a traditional layout optimization. We developed a geometric relationship between wind turbines to find an approximate optimal yaw angle, bypassing the need for either a nested or coupled wind plant control optimization. It also provides a significant and immediate improvement to wind power plant design by enabling the co-design of turbine layout and yaw control for wake steering. A small co-designed plant shown in this article produces 0.8 % more energy than its sequentially designed counterpart. This additional energy production comes with no additional infrastructure, turbine hardware, or control software; it is simply the outcome of optimizing the turbine layout and yaw control together, resulting in millions of dollars of additional revenue for the wind power plants of the future.

17 WIND ENERGY↗
DOE OSTI2024

Daily Arctic Lightning Strokes

In recent decades, lightning activity at high latitudes has increased. Tall thunderstorm clouds affect radiation balance directly, as well as indirectly through lightning-initiated fires and the resulting smoke. One can remotely sense lightning strokes over the globe through their VLF radio emission, and, with multiple receivers, it is possible to precisely locate lightning strokes. This technique makes it possible to continuously monitor arctic lightning--a capability not possible by other means. In this research effort, a World-Wide Lightning Location Network station, consisting of a VLF receiver, signal processing hardware, and analysis software, were installed at the North Slope of Alaska (NSA) facility and planned to operate for several years. This far north location is expected to improve the network's high-latitude detection efficiency.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Towards Generic Parallel Programming in Computer Science Education with Kokkos

Parallel patterns, views, and spaces are promising abstractions to capture the programmer's intent as well as the contextual information that can be used by an underlying runtime to efficiently map software to parallel hardware. These abstractions can be valuable in cases where an algorithm must accommodate requirements of code and performance portability across hardware architectures and vendor programming models. Kokkos is a parallel programming model for host- and accelerator architectures that relies on these abstractions and targets these requirements. It consists of a pure C++ interface, a specification, and a programming library. The programming library exposes patterns and types and maps them to an underlying abstract machine model. The abstract machine model offers a generic view of parallel hardware. While Kokkos is gaining popularity in large-scale HPC applications at some DOE laboratories, we believe that the implemented concepts are of interest to a broader audience including academia as they may contribute to a generic, vendor, and architecture-independent education of parallel programming. In this work, we give an insight into the design considerations of this programming model and list important abstractions. Further, we document best practices obtained from giving virtual classes on Kokkos and give pointers to resources that the reader may consider valuable for a lecture on generic parallel programming for students with preexisting knowledge on this matter.

Ciesko, Jan↗