Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Direct Alpha Spectrometry of Nuclear Fallout

Advanced instruments and methods are under development to allow direct alpha spectrometry of nuclear fallout debris near the point of collection, to support nuclear forensics (NF). New approaches are needed to support NF in order to accelerate the process for data generation and reduce the overall timeline for decision making. Fallout debris at short time periods following detonation can be difficult to work with for alpha spectrometry, due to the presence of intense beta radiation originating from significant quantities of high-activity fission products. Intense beta radiation can challenge traditional silicon-based high-resolution alpha spectrometers. Addressing this, single-crystal (sc) chemical vapor deposition (CVD) produced diamond semiconductors have been studied for use for alpha spectrometry for assaying nuclear fallout debris. Tests have been performed using scCVD sensors to assay a variety of actinide-bearing samples. Sample preparation, when done, has been limited to pulverization using a mechanical ball mill. To reduce measurement times, multi-chip arrays of scCVD diamond semiconductor have been developed in form factors suitable for field deployment in support of NF objectives. These arrays have been tested using high-beta-activity sol gel surrogate nuclear explosive debris (SNED) containing varying concentrations of uranium and plutonium. Results from the use of scCVD detectors with sol gel SNED will be presented.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
DOE OSTI2020

Influence of TMAO as co-solvent on the gelation of silica-PNIPAm core-shell nanogels at intermediate volume fractions

We study the structure and dynamics of poly(N-isopropylacrylamide) (PNIPAm) core-shell nanogels dispersed in aqueous trimethylamine N-oxide (TMAO) solutions by means of smallangle X-ray scattering and X-ray photon correlation spectroscopy (XPCS). Upon increasing the temperature above the lower critical solution temperature of PNIPAm at 33°C, a colloidal gel is formed as identified by an increase of I(q) at small q as well as a slowing down of sample dynamics by various orders of magnitude. With increasing TMAO concentration the gelation transition shifts linearly to lower temperatures. Above a TMAO concentration of approximately 0.40 mol/L corresponding to a 1:1 ratio of TMAO and NIPAm groups, collapsed PNIPAm states are found for all temperatures without any gelation transition. This suggests that reduction of PNIPAm-water hydrogen bonds due to the presence of TMAO results in a stabilisation of the collapsed PNIPAm state and suppresses gelation of the nanogel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Oxides and Nitrides with Asymmetric Pore Structure from Block Copolymer Co–Assembly and Non–Solvent Induced Phase Separation

Materials combining an asymmetric pore structure with mesopores everywhere enable high surface area accessibility and fast transport, making them attractive for e.g., energy conversion and storage applications. Block copolymer (BCP)/inorganic precursor co-assembly combined with non-solvent induced phase separation (NIPS) provides a route to materials in which a mesoporous top surface layer merges into an asymmetric support with graded porosity along the film normal and mesopores throughout. Here, the co-assembly and non-solvent-induced phase separation (CNIPS) of poly(isoprene)-b-poly(styrene)-b-poly(4-vinylpyridine) (ISV) triblock terpolymer and titanium dioxide (TiO 2 ) sol-gel nanoparticlesare reported. Heat-treatment in air results in free-standing asymmetric porous TiO 2 . Further thermal processing in ammonia results in free-standing asymmetric porous titanium nitride (TiN). processing changes alter structural membrane characteristics is demonstrated. Changing the CNIPS evaporation time results in various membrane cross-sections ( finger-like to sponge-like). Further, oxide and nitride material composition, crystallinity, and porosity are tuned by varying thermal processing conditions. Finally, thermal processing condition effects are probed on phase-pure asymmetric nitride membrane behavior using cyclic voltammetry to elucidate their influence, e.g., on specific capacitance. Results provide further insights into improving asymmetric and porous materials for applications including energy conversion and storage, separation, and catalysis and motivate a further expansion of CNIPS to other (in)organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Photocatalytic Hydrogen Evolution Using Mesoporous Honeycomb Iron Titanate

Mesoporous honeycomb iron titanate using a sol-gel, evaporation-induced self-assembly method is synthesized. A triblock copolymer, F127, serves as a structure-directing agents, with iron chloride and titanium (IV) isopropoxide as inorganic precursors. The strong intermolecular force of attraction among urea, metal precursors, and polymer led to the formation of the mesoporous honeycomb structure. The study of physicochemical properties using different techniques reveals the formation of microstructures with a remarkable degree of porosity. The amorphous iron titanate outperforms the photochemical generation of H 2 due to its disorderly structural arrangement and incomplete crystal formation. The randomness on the structure provides more area for catalytic reaction by providing more contact with the reactant and superior light absorption capability. The high amount of hydrogen gas, 40.66 mmolg -1 h -1 , is observed in the investigation over 3 h of activity for the iron titanate honeycomb sample. This yield is a more significant amount compared to the obtained for the commercially available TiO 2 (23.78 mmolg -1 h -1 ). The iron titanate materials synthesized with low-cost materials and methods are very effective and have the potential for hydrogen generation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Direct Ink Writing of 3D Zn Structures as High‐Capacity Anodes for Rechargeable Alkaline Batteries

The relationship between structure and performance in alkaline Zn batteries is undeniable, where anode utilization, dendrite formation, shape change, and passivation issues are all addressable through anode morphology. While tailoring 3D hosts can improve the electrode performance, these practices are inherently limited by scaffolds that increase the mass or volume. Herein, a direct write strategy for producing template‐free metallic 3D Zn electrode architectures is discussed. Concentrated inks are customized to build designs with low electrical resistivity (5 × 10 −4 Ω cm), submillimeter sizes (200 μm filaments), and high mechanical stability (Young's modulus of 0.1–0.5 GPa at relative densities of 0.28–0.46). A printed Zn lattice anode versus NiOOH cathode with an alkaline polymer gel electrolyte is then demonstrated. This Zn||NiOOH cell operates for over 650 cycles at high rates of 25 mA cm −2 with an average areal capacity of 11.89 mAh cm −2 , a cumulative capacity of 7.8 Ah cm −2 , and a volumetric capacity of 23.78 mAh cm −3 . A thicker Zn anode achieves an ultrahigh areal capacity of 85.45 mAh cm −2 and a volumetric capacity of 81.45 mAh cm −3 without significant microstructural changes after 50 cycles.

25 ENERGY STORAGE↗
DOE OSTI2024

1,4-cineole: a bio-derived solvent for highly stable graphene nanoplatelet suspensions and well-dispersed UHMWPE nanocomposite fibers

The exceptional properties of carbon nanoparticles, such as graphene, promise to expand the performance and functionality of many materials. The reinforcement of polymers is of keen interest due to their low density and flexible manufacturing methods. However, dispersing graphene in them has proven to be an enduring challenge due to the particles’ propensity to form performance degrading agglomerations. Furthermore, effective solvents for nanoparticle dispersion are commonly harmful, non-renewable, petrochemicals. In this work, a bio-derived solvent, 1,4-cineole, is demonstrated as a renewable alternative to these solvents that can be used to form highly stable graphene nanoplatelet (GnP) suspensions and used to gel spin well-dispersed UHMWPE/GnP nanocomposite fibers. The GnP concentration in the fibers was varied across three orders of magnitude, 0.01 wt% to 1 wt%, to examine its effect on fiber microstructure and properties. At low concentrations the particles act as point defects without affecting the fiber microstructure, and poor particle/matrix interfacial adhesion results in significantly reduced mechanical properties. At 1 wt% GnPs, a network effect takes hold thereby reinforcing the fibers, but the particles also impede the growth and orientation of crucial load-carrying crystalline structures in the fiber. Furthermore, unveiling the microstructural effects of GnPs on highly oriented and crystalline polymers in this study provides crucial insights for future work developing high-performance polymer nanocomposite fibers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Investigations on the electronic properties and effect of chitosan capping on the structural and optical properties of zinc aluminate quantum dots

Quantum confined uncapped and chitosan capped nanoparticles of ZnAl 2 O 4 synthesized by microwave-assisted sol–gel method were investigated by structural analysis and optical techniques. X-ray diffraction studies confirmed the formation of cubic spinels with crystallite size 4.5 nm and 3.4 nm, respectively for uncapped and chitosan capped ZnAl 2 O 4 nanoparticles. Chitosan capping produced a blue shift in bandgap energy (3.84 to 3.94 eV) agreeing with size effects according to the Brus equation. A blue shift in emission peak and enhancement in photoluminescence intensity was also observed upon chitosan capping. The electronic band structure and the density of states of the bulk spinel were also calculated using density functional theory. The effective masses of electrons and holes estimated based on the band structure were used to extract the excitonic Bohr radius.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of chloride ingress on self-healing recovery of smart cementitious composite incorporating crystalline admixture and MgO expansive agent

Highlights: • Crack closure under wet/dry cycles in chloride solution is higher than the one in distilled water. • Element analysis shows that calcium is vital for crack healing either in water or chloride solution. • AFm is consumed by chloride ion to form Fs, and Fs were decomposed to AH{sub 3} by carbonation. • Soluble reactive silica reacts with calcium hydrate to form C-S-H gel to heal concrete cracks. • Expansion of magnesium hydroxide facilitates crack self-healing by interconnected network. In this study, the effect of chloride environment containing various concentrations of chloride ion (Cl{sup −}) on self-healing performance of pre-cracked cementitious composite containing crystalline admixture (CA) and MgO expansive agent (MEA) was investigated under wet-dry cycles in chloride solutions. The results revealed that the Cl{sup −} changed the mineralogy of self-healing products, and consequently, affected the crack closure ratio and mechanical strength recovery. When self-healing occurred in distilled water, a large amount of ettringite (AFt) were detected, whereas in Cl{sup −} solution, monosulfate (AFm) was consumed by Cl{sup −} to form Friedel's salt (Fs), and then the Fs was decomposed to Al(OH){sub 3}(AH{sub 3}) due to carbonation. During the multiphase conversion process, hydroxide (OH{sup −}) was released into crack solution, therefore the dissolved carbon dioxide (CO{sub 2}) concentration was increased. The carbonation of the crystals formed in cracks was accelerated with the volume expansion, which achieved rapid crack sealing but contributed little to the mechanical performance recovery.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hydration of potassium citrate-activated BOF slag

Basic Oxygen Furnace (BOF) slag is currently utilized with low-grade applications or landfilled. Here, we investigate a novel route to upgrade BOF slag to a high-performance binder by chemical activation with tri-potassium citrate. The impact of tri-potassium citrate on hydration and phase assemblage of BOF slag is analyzed with a multi-technique approach. Results reveal that the addition of tri-potassium citrate considerably enhances the reactivity of brownmillerite and accelerates the hydration of belite at early ages. The majority of brownmillerite hydrates within 24 h, and the reaction kinetics is controlled by the activator dosage. The main products of BOF slag hydration are siliceous hydrogarnet and C-S-H gel. Acting as a strong water reducer, tri-potassium citrate enables the manufacture of slag pastes with high compressive strength (up to 75 MPa at 28 days) and low porosity. Leaching of heavy metals from the slag pastes fulfills the Dutch Soil Quality Decree limits.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cs retention and diffusion in C-S-H at different Ca/Si ratio

Cement and concrete are commonly used in the construction of repository sites for radioactive wastes. The correct isolation of those contaminants requires good adsorption and low diffusion rates. Both parameters are highly affected by many factors, such as pH, temperature or composition. The large variability of experimental conditions and formulations makes it extraordinarily difficult to tackle the influence of each of them independently in experimental samples. To this effect, molecular dynamics simulations have been employed in this study to investigate the role of the composition in the capacity to retain Cs and diffusivity of these ions in calcium silicate hydrate (C-S-H) gel pores. The results indicate that the adsorption of Cs ions is worsened at high Ca/Si ratios due to a lower interaction of the cations with the C-S-H surface, while hydrophilicity of the C-S-H nanopore rises, resulting in higher long-range ordering and lower diffusion coefficients of Cs ions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Lattice Boltzmann simulation of the dissolution of slag in alkaline solution using real-shape particles

Highlights: • A dissolution numerical model was proposed to capture the real dissolution kinetics of slag in alkaline solution. • The log forward dissolution rate of Si was described as a function of NBO/T and solution pH. • A threshold solid volume fraction of 0.688 was found for a voxel in 3D, 63.8% larger than that for a pixel in 2D. • The proposed dissolution numerical model provides a reliable alternative to study the dissolution kinetics of slag. A dissolution numerical model was proposed in this study to capture the real dissolution kinetics of slag in alkaline solution. It consists of three modules, i.e. (i) simulation of the initial particle parking structure of slag in alkaline solution using real-shape particles of slag, (ii) simulation of the chemical reactions between slag and solution based on the transition state theory, and (iii) simulation of the physical transport of aqueous ions using the lattice Boltzmann method. This dissolution numerical model was verified using experimental results, showing reasonable accuracy. After verification, the dissolution numerical model was implemented to study the influences of temperature and particle shape using a proper recipe of slag in alkaline solution. This recipe was designed to avoid solid phase precipitation or gel formation via thermodynamic analysis. The simulation results showed faster dissolution kinetics of slag when using higher temperatures and more irregular particle shapes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

On the retardation mechanisms of citric acid in ettringite-based binders

This study aims to obtain insights into the retardation mechanism of citric acid in an ettringite-based binder from ladle slag and gypsum. The hydration kinetics and phase assemblage of the binder were experimentally investigated and thermodynamically modelled. Additionally, the effects of citric acid on synthetic ettringite were studied to obtain further understanding of the interaction between this organic ligand and the crystal. Experimental results reveal that citric acid works as an inhibitor of ettringite's formation leading to the precipitation of monosulfate and gypsum; the ettringite surface blockage by citrate ligand effectively prevents precipitation of this crystal. This leads to an overestimation in the precipitation of ettringite in the thermodynamic model due to this kinetic barrier imposed by the ligand. Thermodynamic modelling suggests ettringite, monosulfate, aluminum hydroxide, and strätlingite as main hydrates in this binder, whereas an intermixed C–(A–)S–H gel was observed experimentally instead of strätlingite.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Belite cements and their activation

Belite cements, BCs, containing mainly belite, alite and calcium aluminates, are currently used as low heat cements. These binders produce high amounts of C–S–H gel and have very good durability properties which are reviewed. Additional advantages include: (i) lower limestone demand, with lower associated CO{sub 2} emissions; (ii) lower energy demand; (iii) lower kiln operating temperature, which means lowering CO{sub 2} and NO{sub x} emissions from fuel burning; and (iv) lower temperature increase at early hydration age. However, early-age strength developments are not competitive with those of Portland cements. Hence, to improve their early-age strength developments is a research priority known as activation. This enhancement can be attained by three compatible approaches: (i) chemical, (ii) physical; and (iii) admixture activations. The current research status for BCs activation is reviewed including: cost-effective element substitutions to stabilize high-temperature forms; fast cooling, milling and mild temperature hydration as physical activation; and the use of C–S–H seeds as admixture activation. After discussion of the resulting microstructures, a research outlook is exercised.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Preferred orientation of calcium aluminosilicate hydrate compacts: Implications for creep and indentation

Nano/micro-indentation has been extensively used to examine elastic properties and creep of cement-based materials. However, there have been inconsistencies in the measured elastic moduli and debate on the creep mechanism of calcium (alumino) silicate hydrates (C-(A-)S-H). To bring new insights, we examined the deviatoric stress-induced preferred orientation of calcium aluminosilicate hydrate (C-A-S-H), portlandite, and ettringite compacts, using synchrotron-based X-ray diffraction. Intense preferred orientations were observed in C-A-S-H compacts, and the c-axis of unit cells is highly aligned with the compression direction; weaker c-axis related fiber-type texture formed in portlandite and ettringite. Higher humidity, greater compacting pressure, and/or increased duration of the pressure intensified the C-A-S-H preferred orientation, which is facilitated by gel-pore water lubrication. This pressure-induced time-dependent preferential re-orientation of crystallites can contribute to the creep of cement-based materials, and it may cause overrepresentation of the soft c-axis of C-(A-)S-H unit-cell in nanoindentation experiments and underestimation of Young's modulus.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Deterioration mechanism of alkali-activated materials in sulfuric acid and the influence of Cu: A micro-to-nano structural, elemental and stable isotopic multi-proxy study

In this study, a multi-proxy approach combining {sup 29}Si, {sup 27}Al and {sup 1}H MAS-NMR, FEG-EPMA, XANES at the Cu K-edge and XRD analytics with hydrochemical tools such as ICP-OES analyses, oxygen-isotope signatures, and thermodynamic modelling was applied to K-silicate-activated metakaolin specimens - with and without CuSO{sub 4}·5H{sub 2}O addition - exposed to sulfuric acid at pH = 2 for 35 days. The results revealed a multistage deterioration mechanism governed by (i) acid diffusion, (ii) leaching of K-A-S-H, (iii) microstructural damage related to precipitation of expansive (K,Ca,Al)-sulfate-hydrate phases (iv) complete dissolution of the K-A-S-H framework, (v) and formation of silica gel in the outermost corroded regions. Copper ions were mainly located in layered spertiniite-chrysocolla-like phases in the as-cured materials. The results demonstrate an overall negative effect of Cu addition on chemical material durability, implying that the reported higher durability of Cu-doped AAM in biocorrosion environments can be best explained by bacteriostatic effects.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Coordination environment of Si in calcium silicate hydrates, silicate minerals, and blast furnace slags: A XANES database

Understanding the silicate polymerization of calcium silicate hydrate (C-S-H) gel and its crystalline polymorphs is important in cement science. NMR can determine Si environments, but the measurement can be time-consuming and provides no spatial information. X-ray absorption near-edge structure (XANES) spectroscopy is a fast tool for probing Si coordination, possibly with spatial information. However, there lacks an understanding of Si K-edge XANES spectra of cement-related silicate phases. Here, a Si K-edge XANES spectral database of nanocrystalline C-S-H, C-S-H minerals, blast-furnace slags, and metakaolin is provided. Si K-edge of C-S-H minerals shifts to higher energies with higher polymerized Si and lower CaSi connectivity in the Si second nearest neighbor shell. Si K-edge energy shows weak correlations with Ca/Si ratio, average SiO bond length, and SiO{sub 4} distortion due to the structural complexity of silicates. The substitution of Al for Si shifts the Si K-edge of tobermorite and slags to higher energies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effects of anionic and nonionic surfactants on the dispersion and stability of nanoSiO2 in aqueous and cement pore solutions

It has been well recognized that the benefits and effectiveness of nanoparticles in cement-based materials could not be maximized if these are not well dispersed. To address this issue, in this study, different anionic (SDS and PCE) and nonionic surfactants (Tweens and Tritons) were used to disperse nanosilica (NS) in aqueous solution and cement pore solution. The results show that the dispersibility of NS in cement pore solution was improved, and the compressive strength of the cement-NS pastes increased linearly with critical micelle concentration (CMC) of nonionic surfactants. Among all surfactants studied, Triton X-405 led the paste to the highest increase in strength (33% at 1-day and 41% at 3-days) since it had the highest CMC. TEM and EDS analysis evidenced that this strength increase might be attributed to the nucleation of outer product CSH gel and its densification with calcite nanocrystals, attributed to Triton X-405 addition.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strategies for control and mitigation of efflorescence in metakaolin-based geopolymers

Efflorescence can be harmful to material performance as a consequence of microstructural changes due to leaching and carbonation of alkalis. This article identifies mechanisms of efflorescence in metakaolin-based geopolymers, and approaches to reduce free/mobile alkali cations and pore network connectivity, and hence reduce efflorescence. Mechanical, mass transport and microstructural properties are assessed in metakaolin-based geopolymer cements produced using different alkali concentrations in the alkali activator and substitution/addition of blast furnace slag, silica fume, calcium aluminate cement, silicone oil and a dispersive admixture. The most effective strategy to reduce efflorescence results from increasing Si/Al in the geopolymer gel by addition of soluble silicate, silica fume or silicone oil. Addition of calcium aluminate cement or a dispersive admixture also reduce efflorescence, but are less effective. These results confirm that efflorescence may be reduced by controlling the amount of soluble silicates and reducing free alkali cations in geopolymers, providing enhanced performance and durability.

36 MATERIALS SCIENCE↗