Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fluorination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Tailoring the Redox Reactions for High-Capacity Cycling of Cation-Disordered Rocksalt Cathodes

Cation-disordered rocksalts (DRXs) have emerged as a new class of high-capacity Li-ion cathode materials. One unique advantage of the DRX chemistry is the structural flexibility that substantially lessens the elemental constraints in the crystal lattice, such as Li content, choice of transition metal redox center paired with appropriate d 0 metal, and incorporation of F anion, which allows optimization of the key redox reactions. Herein, a series of the DRX oxyfluorides based on the Mn redox have been designed and synthesized. By tailoring the stoichiometry of the DRX compositions, high-capacity cycling by promoting the cationic Mn 2+ /Mn 4+ redox reactions while suppressing those from anionic O is successfully demonstrated. A highly fluorinated DRX compound, Li 1.2 Mn 0.625 Nb 0.175 O 1.325 F 0.675 (M 0.625 F 0.675 ), delivers a capacity of ≈170 mAh g -1 at C/3 for 100 cycles. Furthermore, this work showcases the concept of balancing the cationic and anionic redox reactions in the DRX cathodes for improved electrochemical performance through the rational composition design.

25 ENERGY STORAGE↗
DOE OSTI2022

Effect of the Selective Halogenation of Small Molecule Acceptors on the Blend Morphology and Voltage Loss of High-Performance Solar Cells

Herein, the impacts of the selective halogenation at two different positions of dicyanomethylene-3-indanone (IC) end groups and inner side chains of small molecular acceptors (SMAs) on the P D :SMA interfacial interactions, blend morphology, and resulting photovoltaic properties are described. In this study, four different SMAs (A1, A2, A3, and A4) with the same molecular backbone, but with different degrees of halogenation, are synthesized. The IC end groups on the backbones of the A1 and A3, and A2 and A4 SMAs are chlorinated and fluorinated, respectively; in addition, 6-phenoxyhexyl inner side chains of the A3 and A4 are chlorinated. The SMAs are paired with a chlorinated PBDT-Cl PD to construct organic solar cells (OSCs). The PBDT-Cl:A4-based OSC exhibits the highest power conversion efficiency of 17.2%, outperforming the PBDT-Cl:A1-(13.3%), PBDT-Cl:A2-(15.6%), and PBDT-Cl:A3-based OSC (16.5%). The Cl atoms on the side chains in the A3 and A4 SMAs enhance the molecular/energetic interactions at the P D :SMA interfaces and improve the blend morphology in terms of domain purity and spacing. These effects lead to the improved fill factors and reduced voltage loss of the PBDT-Cl:A3- and PBDT-Cl:A4-based OSCs. This study demonstrates the importance of appropriate halogenation of SMAs in optimizing the blend morphology, reducing voltage loss, and improving OSC performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Exceptional Alignment in a Donor–Acceptor Conjugated Polymer via a Previously Unobserved Liquid Crystal Mesophase

Abstract Orienting polymer semiconductors is desirable to optimize device characteristics, provide insight into microstructure, and magnify subtle phase behavior. Here, a combination of uniaxial strain and subsequent heating of the donor–acceptor (DA) polymer PBnDT‐FTAZ is discovered to lead to exceptional optical dichroic ratios of up to 38 (and close to 50 near the polymer's absorption edge). This alignment is achieved due to the existence of a previously undetected thermotropic liquid crystal (LC) mesophase. The LC transition, not discernable through calorimetry, is uncovered through a combination of in situ UV–vis spectroscopy, X‐ray scattering, and dynamic mechanical analysis (DMA). Comparing PBnDT‐FTAZ to the non‐fluorinated PBnDT‐HTAZ and the homo polymer PBnDT, all of which show similar thermal transitions, reveals that exceptional alignment is only found in PBnDT‐FTAZ. This is attributed to the PBnDT‐FTAZ film having two distinct liquid crystal populations, and the polymer templating to a highly aligned, high‐clearing temperature population when heated. The DMA thermal relaxation behavior observed here is also seen in other DA conjugated polymers suggesting that such thermotropic LC mesophases may be common in these materials. These findings demonstrate a polymer semiconductor with remarkable alignment and uncover phase behavior with broad implications for process‐structure‐property relationships in polymer semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultrafast Exciton Transport with a Long Diffusion Length in Layered Perovskites with Organic Cation Functionalization

Abstract Layered perovskites have been employed for various optoelectronic devices including solar cells and light‐emitting diodes for improved stability, which need exciton transport along both the in‐plane and the out‐of‐plane directions. However, it is not clear yet what determines the exciton transport along the in‐plane direction, which is important to understand its impact toward electronic devices. Here, by employing both steady‐state and transient photoluminescence mapping, it is found that in‐plane exciton diffusivities in layered perovskites are sensitive to both the number of layers and organic cations. Apart from exciton–phonon coupling, the octahedral distortion is revealed to significantly affect the exciton diffusion process, determined by temperature‐dependent photoluminescence, light‐intensity‐dependent time‐resolved photoluminescence, and density function theory calculations. A simple fluorine substitution to phenethylammonium for the organic cations to tune the structural rigidity and octahedral distortion yields a record exciton diffusivity of 1.91 cm 2 s −1 and a diffusion length of 405 nm along the in‐plane direction. This study provides guidance to manipulate exciton diffusion by modifying organic cations in layered perovskites.

Xiao, Xun↗
DOE OSTI2023

Benzo[d]thiazole Based Wide Bandgap Donor Polymers Enable 19.54% Efficiency Organic Solar Cells Along with Desirable Batch-to-Batch Reproducibility and General Applicability

The limited selection pool of high-performance wide bandgap (WBG) polymer donors is a bottleneck problem of the nonfullerene acceptor (NFA) based organic solar cells (OSCs) that impedes the further improvement of their photovoltaic performances. In this work, a series of new WBG polymers, namely PH-BTz, PS-BTz, PF-BTz, and PCl-BTz, are developed by using the bicyclic difluoro-benzo[d]thiazole (BTz) as the acceptor block and benzo[1,2-b:4,5-b']dithiophene (BDT) derivatives as the donor units. By introducing S, F, and Cl atoms to the alkylthienyl sidechains on BDT, the resulting polymers exhibit lowered energy levels and enhanced aggregation properties. The fluorinated PBTz-F not only exhibits a low-lying HOMO level, but also has stronger face-on packing order and results in more uniform fibril-like interpenetrating networks in the related PF-BTz:L8-BO blend. A high-power conversion efficiency (PCE) of 18.57% is achieved. Moreover, PBTz-F also exhibits a good batch-to-batch reproducibility and general applicability. In addition, ternary blend OSCs based on the host PBTz-F:L8-BO blend and PM6 guest donor exhibits a further enhanced PCE of 19.54%, which is among the highest values of OSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Surface Modification of a MXene by an Aminosilane Coupling Agent

MXenes, two–dimensional (2D) transition metal carbides and/or nitrides, possess surface termination groups such as hydroxyl, oxygen, and fluorine, which are available for surface functionalization. Their surface chemistry is critical in many applications. This article reports amine functionalization of Ti 3 C 2 T x MXene surface with [3–(2–aminoethylamino)–propyl]trimethoxysilane (AEAPTMS). Characterization techniques such as X–ray photoelectron spectroscopy verify the success of the surface functionalization and confirm that the silane coupling agent bonds to Ti 3 C 2 T x surface both physically and chemically. The functionalization changes the MXene surface charge from –35 to +25 mV at neutral pH, which allows for in situ preparation of self–assembled films. Further, surface charge measurements of the functionalized MXene at different pH values show that the functionalized MXene has an isoelectric point at a pH around 10.7, and the highest reported positive surface charge of +62 mV at a pH of 2.58. Furthermore, the existence of a mixture of different orientations of AEAPTMS and the simultaneous presence of protonated and free amine groups on the surface of Ti 3 C 2 T x are demonstrated. As a result, the availability of free amine groups on the surface potentially permits the fabrication of crosslinked electrically conductive MXene/epoxy composites, dye adsorbents, high–performance membranes, and drug carriers. Surface modifications of this type are applicable to many other MXenes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Multiscale and Multimodal Characterization of 2D Titanium Carbonitride MXene

Here, a comprehensive study on the prototype solid solution phase carbonitride MXene Ti 3 CN is conducted using nuclear magnetic resonance, electron spin resonance, total and quasi-elastic neutron scattering, combined with density functional theory-based electronic structure and molecular dynamic calculations. The combination of experiment and theory lead toward rational atomic structural models of Ti 3 CN. The remnant Al ions from the etching process significantly tune the interlayer spacing, distinct from the more typical MXene, Ti 3 C 2 , prepared similarly. Neutron scattering indicates the surface terminations of Ti 3 CN display high oxygen and fluorine concentrations and rather low hydroxyl and hydrogen concentrations. Calculations show that the structure including both the residual Al ions and mixed surface terminations give the best agreement with the measurements. The water molecules in Ti 3 CN are highly immobile, in strong contrast to those in Ti 3 C 2 . The analysis of the electronic structure suggests that the nitride MXene displays higher conductivity than the carbides. Finally, the absence of hydroxyl groups in terminations, the solid-solution in the anion sites, the remnants within layers, and immobile water altogether make the carbonitrides a unique series in the MXene family, implying a further exploration of their exotic properties and applications in energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Free-Charge Carrier Generation in Homojunction Non-Polymeric Organic Semiconductor Films - The Role of the Optical Frequency Dielectric Constant

Engineering the dielectric constant (..epsilon..) to lower the exciton binding energy of the light-absorbing semiconductor can improve organic photovoltaic (OPV) device performance. Here, a series of materials are reported with 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (INCN) acceptor end groups and a central glycolated bis(4H-cyclopenta[2,1-b:3,4-b']dithiophene) unit with large low-frequency (..epsilon..lf = 7.4-7.9 at 0.1-0.2 MHz) and optical-frequency (..epsilon..opt up to 6.6 at 2 x 1014 Hz) dielectric constants. The INCN end groups differed in whether they were protonated, chlorinated, or fluorinated, with the latter having the highest ..epsilon..opt. An ..epsilon..opt of 6.6 is predicted to lead to a low exciton binding energy of ~0.04 eV. Time-resolved microwave conductivity measurements showed a temperature-dependent yield-mobility product, with it increasing linearly from 340 K. The onset temperature was near that required to overcome the calculated exciton binding energy and indicates increased free charge generation in a homojunction film. Room temperature transient absorption spectroscopy revealed that photoexcitation rapidly converted to a lower energy state that was consistent with the formation of polarons or a charge transfer state. This work provides experimental evidence of the importance of ..epsilon..opt for the generation of free charges, and a strategy for development of efficient single chromophore homojunction OPV devices.

charge generation↗
DOE OSTI2023

Sodium Rich Vanadium Oxy‐Fluorophosphate – Na 3.2 Ni 0.2 V 1.8 (PO 4 ) 2 F 2 O – as Advanced Cathode for Sodium Ion Batteries

Abstract Conventional sodium‐based layered oxide cathodes are extremely air sensitive and possess poor electrochemical performance along with safety concerns when operating at high voltage. The polyanion phosphate, Na 3 V 2 (PO 4 ) 3 stands out as an excellent candidate due to its high nominal voltage, ambient air stability, and long cycle life. The caveat is that Na 3 V 2 (PO 4 ) 3 can only exhibit reversible capacities in the range of 100 mAh g −1 , 20% below its theoretical capacity. Here, the synthesis and characterizations are reported for the first time of the sodium‐rich vanadium oxyfluorophosphate, Na 3.2 Ni 0.2 V 1.8 (PO 4 ) 2 F 2 O, a tailored derivative compound of Na 3 V 2 (PO 4 ) 3 , with extensive electrochemical and structural analyses. Na 3.2 Ni 0.2 V 1.8 (PO 4 ) 2 F 2 O delivers an initial reversible capacity of 117 mAh g −1 between 2.5 and 4.5 V under the 1C rate at room temperature, with 85% capacity retention after 900 cycles. The cycling stability is further improved when the material is cycled at 50 °C within 2.8–4.3 V for 100 cycles. When paired with a presodiated hard carbon, Na 3.2 Ni 0.2 V 1.8 (PO 4 ) 2 F 2 O cycled with a capacity retention of 85% after 500 cycles. Cosubstitution of the transition metal and fluorine in Na 3.2 Ni 0.2 V 1.8 (PO 4 ) 2 F 2 O as well as the sodium‐rich structure are the major factors behind the improvement of specific capacity and cycling stability, which paves the way for this cathode in sodium‐ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Green Electrode Processing Enabled by Fluoro-Free Multifunctional Binders for Lithium-Ion Batteries

The eco-friendly processing of conjugated polymer binder for lithium-ion batteries demands improved polymer solubility by introducing functional moieties, while this strategy will concurrently sacrifice polymer conductivity. Employing the polyfluorene-based binder poly(2,7-9,9 (di(oxy-2,5,8-trioxadecane))fluorene) (PFO), soluble in water-ethanol mixtures, a novel approach is presented to solve this trade-off, which features integration of aqueous solution processing with subsequent controlled thermal-induced cleavage of solubilizing side chains, to produce hierarchically ordered structures (HOS). The thermal processing can enhance the intermolecular π–π stacking of polyfluorene backbone for better electrochemical performance. Notably, HOS-PFO demonstrated a substantial 6–7 orders of magnitude enhancement in electronic conductivity, showcasing its potential as a functional binder for lithium-ion batteries. As an illustration, HOS-PFO protected SiOx anodes, utilizing in situ side chain decomposition of PFO surrounding SiOx particles after aqueous processing are fabricated. HOS-PFO contributed to the stable cycling and high-capacity retention of practical SiOx anodes (3.0 mAh cm -2 ), without the use of any conducting carbon additives or fluorinated electrolyte additives. It is proposed that this technique represents a universal approach for fabricating electrodes with conjugated polymer binders from aqueous solutions without compromising conductivity.

25 ENERGY STORAGE↗
DOE OSTI2025

Hydrocyclization/Defluorination of CF 3 ‐Substituted Acrylamides: Insights from Kinetics of Hydrogen Atom Transfer

Abstract The introduction of F‐containing groups into organic molecules can significantly alter their physical and chemical properties. Particularly, gem ‐difluoroalkenes serve as versatile precursors for a broad variety of organofluorine compounds, commonly used in agrochemicals, pharmaceuticals, and materials science. Based on the kinetics of H• transfer to acrylamide ( k H = 2.28 × 10 −4 M −1 s −1 at 300 K in toluene), the study describes a nickel‐hydride‐(or Li[BEt 3 H]) initiated hydrocyclization/defluorination of CF 3 ‐substituted acrylamides, offering alternative access to 4‐fluorovinyl‐substituted 2‐pyrrolidones (Seletracetam derivatives that are antiepileptic drug candidates). This process proceeds with high yields and remarkable chemo‐ and regioselectivity. The hydrocyclization/defluorination can be initiated by either H• or H – transfer, followed by a 5‐exo‐trig cyclization and subsequent fluorine elimination. The strategy has been applied in the late‐stage functionalization of drug molecules, providing a valuable tool in the synthesis of pharmaceutical compounds.

Wan, Yanjun [College of Pharmaceutical Sciences Zh↗
DOE OSTI2020

Significantly Improved Cyclability of Conversion-Type Transition Metal Oxyfluoride Cathodes by Homologous Passivation Layer Reconstruction

Electrode stabilization by surface passivation has been explored as the most crucial step to develop long-cycle lithium-ion batteries (LIBs). In this work, functionally graded materials consisting of “conversion-type” iron-doped nickel oxyfluoride (NiFeOF) cathode covered with a homologous passivation layer (HPL) are rationally designed for long-cycle LIBs. The compact and fluorine-rich HPL plays dual roles in suppressing the volume change of NiFeOF porous cathode and minimizing the dissolution of transition metals during LIBs cycling by forming a structure/composition gradient. The structure and composition of HPL reconstructs during lithiation/delithiation, buffering the volume change and trapping the dissolved transition metals. As a result, a high capacity of 175 mAh g -1 (equal to an outstanding volumetric capacity of 936 Ah L -1 ) with a greatly reduced capacity decay rate of 0.012% per cycle for 1000 cycles is achieved, which is superior to the NiFeOF porous film without HPL and commercially available NiF 2 -FeF 3 powders. Finally, the proposed chemical and structure reconstruction mechanism of HPL opens a new avenue for the novel materials development for long-cycle LIBs.

25 ENERGY STORAGE↗
DOE OSTI2020

Near Neutral pH Redox Flow Battery with Low Permeability and Long-Lifetime Phosphonated Viologen Active Species

A highly stable phosphonate-functionalized viologen is introduced in this work as the redox-active material in a negative potential electrolyte for aqueous redox flow batteries (ARFBs) operating at nearly neutral pH. The solubility is 1.23 m and the reduction potential is the lowest of any substituted viologen utilized in a flow battery, reaching –0.462 V versus SHE at pH = 9. The negative charges in both the oxidized and the reduced states of 1,1'-bis(3-phosphonopropyl)-[4,4'-bipyridine]-1,1'-diium dibromide ( BPP–Vi ) effect low permeability in cation exchange membranes and suppress a bimolecular mechanism of viologen decomposition. A flow battery pairing BPP–Vi with a ferrocyanide-based positive potential electrolyte across an inexpensive, non-fluorinated cation exchange membrane at pH = 9 exhibits an open-circuit voltage of 0.9 V and a capacity fade rate of 0.016% per day or 0.00069% per cycle. Overcharging leads to viologen decomposition, causing irreversible capacity fade. Our research introduces extremely stable, extremely low-permeating and low reduction potential redox active materials into near neutral ARFBs.

25 ENERGY STORAGE↗
DOE OSTI2020

Precise Control of Phase Separation Enables 12% Efficiency in All Small Molecule Solar Cells

Abstract Compared to conjugated polymers, small‐molecule organic semiconductors present negligible batch‐to‐batch variations, but presently provide comparatively low power conversion efficiencies (PCEs) in small‐molecular organic solar cells (SM‐OSCs), mainly due to suboptimal nanomorphology. Achieving precise control of the nanomorphology remains challenging. Here, two new small‐molecular donors H13 and H14 , created by fluorine and chlorine substitution of the original donor molecule H11 , are presented that exhibit a similar or higher degree of crystallinity/aggregation and improved open‐circuit voltage with IDIC‐4F as acceptor. Due to kinetic and thermodynamic reasons, H13 ‐based blend films possess relatively unfavorable molecular packing and morphology. In contrast, annealed H14 ‐based blends exhibit favorable characteristics, i.e., the highest degree of aggregation with the smallest paracrystalline π–π distortions and a nanomorphology with relatively pure domains, all of which enable generating and collecting charges more efficiently. As a result, blends with H13 give a similar PCE (10.3%) as those made with H11 (10.4%), while annealed H14 ‐based SM‐OSCs have a significantly higher PCE (12.1%). Presently this represents the highest efficiency for SM‐OSCs using IDIC‐4F as acceptor. The results demonstrate that precise control of phase separation can be achieved by fine‐tuning the molecular structure and film formation conditions, improving PCE and providing guidance for morphology design.

Bin, Haijun↗
DOE OSTI2021

Multifunctional Utilization of Pitch-Coated Carbon Fibers in Lithium-Based Rechargeable Batteries

This work reports carbon fibers as an electrode material and current collector for dual-carbon and lithium-ion batteries. Here, fully graphitic and semigraphitic carbon fibers undergo anion intercalation beyond 4.5 V versus Li/Li + . Symmetric dual-carbon full cells using a pitch-coated fully graphitic carbon fiber mat as both cathode and anode delivers an energy-density of 276 and 322 Wh kg -1 at 342 W kg -1 power density in the voltage range of 3.0–5.0 and 3.0–5.2 V, respectively. On the other hand, nongraphitic carbon fibers do not exhibit anion intercalation up to 5.2 V and can be used as a current collector. They also possess a larger number of Li + storage sites in their randomly oriented microstructure when used as an anode. A lithium-ion full cell with double carbon-coated C-LiFePO 4 loaded on nongraphitic carbon fiber as a cathode and pitch-coated nongraphitic carbon fiber as an anode exhibits 202.6 and 75.2 Wh kg -1 energy density at power densities of 46.75 W kg -1 and 11.7 kW kg -1 , respectively in 2.0–3.5 V range. This pitch-coated carbon fiber-based battery configuration eliminates the need for metal foils and costly fluorinated binders, lowers overall weight of the cell, and is capable of sustaining mechanical stress and thermal shock.

PF6− intercalation↗