Autonomous flight control for a Titan exploration aerobot
In this paper, we discuss steps towards the development of an autonomy architecture, and concentrate on the autonomous flight control subsystem.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In this paper, we discuss steps towards the development of an autonomy architecture, and concentrate on the autonomous flight control subsystem.
A comprehensive description of the design and performance of the Advanced Thermal Control Flight Experiment (ATFE) is presented. The ATFE studied in a space environment for five years the steady state, transient ground and flight performance of (1) a thermal diode heat pipe, (2) a phase change material, and (3) a feedback controlled variable conductance heat pipe. It was found that all were flight worthy and highly reliable.
Pilot dynamic response to sudden flight control system failures
Model performance index /PI/ providing criterion for approximating one dynamic flight control system by another based on geometrical representation of linear autonomous systems
Model performance index /Pi/ providing criterion for approximating one dynamic flight control system by another based on geometrical representation of linear autonomous systems
Computer programs for the design of analog and digital flight control systems are documented. The program DIGADAPT uses linear-quadratic-gaussian synthesis algorithms in the design of command response controllers and state estimators, and it applies covariance propagation analysis to the selection of sampling intervals for digital systems. Program SCHED executes correlation and regression analyses for the development of gain and trim schedules to be used in open-loop explicit-adaptive control laws. A linear-time-varying simulation of aircraft motions is provided by the program TVHIS, which includes guidance and control logic, as well as models for control actuator dynamics. The programs are coded in FORTRAN and are compiled and executed on both IBM and CDC computers.
Unlike their synchronized counterparts, redundant channels in an asynchronous flight system can, under no-fault conditions, exhibit cross-channel data disparities. Sources of these errors are examined in terms of the general, individual functions of the flight control and navigation application in the asynchronous digital environment. The effects of asynchronism on trajectory programmers, dynamic control algorithms and data reconstruction processes are examined in terms of data skews, data latencies, and clock rate uncertainties. An example is presented in which time corrections are applied to reduce the data disparities. Practical limitations of the approach of the example are discussed.
Report reviews program of testing and evaluation of digital flight-control system for X-29A airplane, with emphasis on operation during tests. Topics include design of system, special electronic testing equipment designed to aid in daily operations, and aspects of testing, including detection of faults.
This paper presents an informal quantitative analysis of the F18 flight control system (FCS). The analysis technique combines a coverage model with a fault tree model. To demonstrate the method's extensive capabilities, we replace the fault tree with a digraph model of the F18 FCS, the only model available to us. The substitution shows that while digraphs have primarily been used for qualitative analysis, they can also be used for quantitative analysis. Based on our assumptions and the particular failure rates assigned to the F18 FCS components, we show that coverage does have a significant effect on the system's reliability and thus it is important to include coverage in the reliability analysis.
A method is presented for the analysis of separate surface automatic flight control systems. The feasibility of such systems is demonstrated by the analysis of an example system, a separate surface wing-leveler for a Cessna 172. This example system employs a separate surface aileron with 15% of the basic airplane roll control power. A 90% reduction in bank-angle gust response can be obtained when compared with the basic airplane. The system does not feed back to the pilot's wheel. When failed (even hardover) the pilot retains more than adequate control of the airplane.
The need for the application of software fault tolerance techniques in digital flight control systems is argued to follow from the requirements derivable from the safety constraints of such systems, requirements which can be stated in terms of minimum acceptable system reliability levels and, moreover, stated quantitatively. It is argued further that, while fault tolerance appears to be a viable mechanism in general, individual fault tolerance schemes need to be analyzed to ensure that they are adequate to the task and being properly utilized, that such analysis is essentially an exercise in software 'reliability' estimation involving software characteristics not currently included in software 'reliability' modeling (most especially, the degree of correlation of malfunctions among redundant, dissimilar software modules), and that, consequently, further research and studies in the characterization of software behavior and malfunctions is required.
A partial requirement specification for an Advanced Subsonic Civil Transport (ASCT) Flight Control System is described. The example was adopted from requirements given in a NASA Contractor report. The language used to describe the requirements, Requirements Specification Language (RSL), is described in a companion document.
The theory of transformations of nonlinear systems to linear ones is applied to the design of an automatic flight controller for the UH-1H helicopter. The helicopter mathematical model is described and it is shown to satisfy the necessary and sufficient conditions for transformability. The mapping is constructed, taking the nonlinear model to canonical form. The performance of the automatic control system in a detailed simulation on the flight computer is summarized.
The results are presented of application of the methodology of Singular Perturbations and Time Scales (SPATS) to the control of digital flight systems. A block diagonalization method is described to decouple a full order, two time (slow and fast) scale, discrete control system into reduced order slow and fast subsystems. Basic properties and numerical aspects of the method are discussed. A composite, closed-loop, suboptimal control system is constructed as the sum of the slow and fast optimal feedback controls. The application of this technique to an aircraft model shows close agreement between the exact solutions and the decoupled (or composite) solutions. The main advantage of the method is the considerable reduction in the overall computational requirements for the evaluation of optimal guidance and control laws. The significance of the results is that it can be used for real time, onboard simulation. A brief survey is also presented of digital flight systems.
Systems performance/design requirements specifications for CH-46C helicopter digital flight control and landing system
A brief description of a SIFT (Software Implemented Fault Tolerance) Flight Control Computer with emphasis on implementation is presented. A multiprocessor system that relies on software-implemented fault detection and reconfiguration algorithms is described. A high level reliability and fault tolerance is achieved by the replication of computing tasks among processing units.
Qualification considerations for assuring the safety of a life-critical digital flight control system include four major areas: systems interactions, verification, validation, and configuration control. The AFTI/F-16 design, development, and qualification illustrate these considerations. In this paper, qualification concepts, procedures, and methodologies are discussed and illustrated through specific examples.
An integrated environment for specifying, prototyping, and implementing a self-repairing flight-control (SRFC) strategy is described. At an interactive workstation, the user can select paradigms such as rule-based expert systems, state-transition diagrams, and signal-flow graphs and hierarchically nest them, assign timing and priority attributes, establish blackboard-type communication, and specify concurrent execution on single or multiple processors. High-fidelity nonlinear simulations of aircraft and SRFC systems can be performed off-line, with the possibility of changing SRFC rules, inference strategies, and other heuristics to correct for control deficiencies. Finally, the off-line-generated SRFC can be transformed into highly optimized application-specific real-time C-language code. An application of this environment to the design of aircraft fault detection, isolation, and accommodation algorithms is presented in detail.