Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Understanding non-stochiometric deposition of multi-principal elemental NiCoCr thin films

Multi-principal elemental NiCoCr thin films with compositional flexibility have potential applications as a thermal barrier, corrosion-resistant coatings, and functional energy materials. In this study, the non-stochiometric multi-principal element alloy thin film formation behavior from an equiatomic ablation target of NiCoCr using pulsed laser deposition has been reported. Here, the effect of varying laser fluence on compositions of constituent elements in the NiCoCr thin films is systematically investigated. The increase in laser fluence typically increases the likelihood of acquiring undesirable particulates in thin films. Therefore, to maintain the film quality the laser fluences are adjusted within the range of 1.3–3.3 J·cm -2 , while the film thicknesses are kept constant at ~30 nm. Results show that the constituent elements are well-distributed in the formed NiCoCr thin films, however, having average atomic percentages of Ni and Cr twice as high as Co irrespective of the equiatomic composition of individual elements in the ablation target. This stochiometric alteration in the as-deposited thin films is governed by the rate of ablation and subsequent evaporation of each element, which is facilitated by the optical properties and vapor pressure of individual constituent elements. Additionally, electron energy-loss spectroscopy and x-ray absorption spectroscopy analysis reveal that the thin films have partially oxidized, with the Cr oxidation contributing the most to the O-K edge in comparison to Ni and Co. Finally, this study presents a laser-assisted pathway for fabricating compositionally flexible NiCoCr thin films and develops an understanding of the non-equilibrium laser-material interactions and how the intrinsic properties of constituent elements affect the stoichiometric flow of materials from the target to the final film deposition.

36 MATERIALS SCIENCE↗

Environmentally significant shifts in trace element emissions from coal plants complying with the 1990 Clean Air Act Amendments

The Clean Air Act Amendments of 1990 (CAAAs) reduced criteria air pollution from coal-fired power plants (CFPPs) in the United States, but compliance strategies additionally altered the magnitude and phase of environmentally significant trace element emissions. This report quantitatively assesses changes in trace element emissions stemming from CAAAs compliance, attributes these changes to specific CAAAs compliance strategies, and discusses implications for future environmental regulatory design. We combine plant-level coal purchase and installed air pollution control device data with a trace element partitioning model to approximate changes in trace element mass entering and exiting CFPPs in the solid, liquid, and gas phase between 1993 and 2017. Though US coal combustion decreased by 2% during this period, the vast majority of trace element emissions reductions stem from the 18-64% reductions in the fleet-wide average concentrations of arsenic, bromine, chloride, lead, mercury, and selenium in the combusted coal. Combined with the installation of air pollution control technologies, these shifts concluded in nationwide reductions of gas phase trace element emissions by between 49 and 68% for the elements included in this study. In contrast, installation of flue gas desulfurization devices increased the mass of trace elements discharged in wastewater. This work reinforces the value of multi-phase emissions regulations in ensuring that contaminants are not shunted from regulated to unregulated phases.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Investigations of element spatial correlation in Mn-promoted Co-based Fischer–Tropsch synthesis catalysts

Making connections between performance and structure in bimetallic catalysts requires knowledge of how the two elements are spatially associated. Elemental maps obtained by analytical TEM methods are an invaluable tool for identifying the location of different elements, but for many samples, visual inspection of elemental maps is insufficient for assessing the degree of element spatial correlation. This is particularly true for beam-sensitive materials where short mapping acquisition times lead to images with high noise and low color depth. In these situations, statistical analysis of elemental maps can be used to identify spatial correlations among the elements in a sample. In this work, the relationship between catalyst performance and bimetallic spatial association was explored using Mn-promoted Co-based Fischer-Tropsch synthesis catalysts prepared by different pretreatment methods. Mn was used as a catalyst additive to suppress methane formation. Catalysts that underwent calcination before reduction produced more methane and fewer long-chain hydrocarbons than catalysts that were directly reduced. The extent to which Co and Mn were spatially associated was assessed using correlation metrics, colocation plots, and histograms generated using data from STEM-EDS maps. Although both catalysts yielded visually similar elemental maps, the results of statistical analysis suggested that the calcined catalyst exhibited greater spatial segregation between the Co and Mn. These findings support the hypothesis that having Mn in close proximity to the Co is essential for the manifestation of Mn promotion effects in Co-based FTS catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trace Elements in Hair from Tanzanian Children: Effect of Dietary Factor

Trace elements in certain amounts are essential for childrens' health, because they are present in tissues participating in metabolic reactions of organisms. Deficiency of the essential elements may result in malnutrition, impaired body immunity, and poor resistance to disease. These conditions might be enhanced against a background of additional adverse environmental factors such as toxic elements. The analysis of elements in childrens' hair will give information on the deficiency of essential elements and excess of toxic elements in relation to their diet. In this study, 141 hair samples from children (girls and boys) living in two regions of Tanzanian mainland (Dar es Salaam and Moshi) and the island of Zanzibar have been analysed for trace elements in relation to food consumption habits. The analysis was carried out using long and short irradiation instrumental neutron activation analysis (INAA) of the Nuclear Physics Institute at Rez, Czech Republic. Arithmetic and geometric means with their respective standard deviations are presented for 19 elements. Subgroups were formed according to age, gender, and geographic regions from which the samples were collected. Differences in concentrations for the groups and with other childhood populations were explored and discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lumping Techniques for Mixed Finite Element Diffusion Discretizations

We are interested in positivity preserving spatial discretizations applicable to arbitrary order mixed finite element spatial discretizations of the radiative diffusion equations. Though not guaranteed to yield strict positivity, matrix lumping is appealing as a method of increasing solution positivity because unlike ad hoc fixups or strictly non-negative, non-linear solution representations, matrix lumping keeps the mixed finite element diffusion equations as a linear system of equations. Self-lumping schemes have previously been shown to be a generalization of more traditional matrix lumping techniques. Self-lumping schemes restrict integration quadrature points to the interpolation points used to define interpolatory finite element basis functions. As shown previously, the positivity and order of accuracy of self-lumping schemes are directly related to the choice of finite element interpolation point. Here, we develop self-lumping schemes for arbitrary order, mixed finite element spatial discretizations of the diffusion equation in Cartesian geometry. After introducing several possible self-lumping schemes appropriate for mixed finite elements, we test the ability of each scheme to increase solution positivity relative to an unlumped discretization using a simple test problem designed to induce negative solutions, evaluating efficacy as a function of finite element order and finite element interpolation point type. The method of manufactured solutions is then used to evaluate order of convergence for promising self-lumping schemes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Transferring elements of a density matrix

We study restrictions imposed by quantum mechanics on the process of matrix-element transfer. This problem is at the core of quantum measurements and state transfer. Given two systems A and B with initial density matrices lambda and r, respectively, we consider interactions that lead to transferring certain matrix elements of unknown lambda into those of the final state r-tilde of B. We find that this process eliminates the memory on the transferred (or certain other) matrix elements from the final state of A. If one diagonal matrix element is transferred, r(tilde sign){sub aa}=lambda{sub aa}, the memory on each nondiagonal element lambda{sub an}ot ={sub b} is completely eliminated from the final density operator of A. Consider the following three quantities, Relambda{sub an}ot ={sub b}, Imlambda{sub an}ot ={sub b}, and lambda{sub aa}-lambda{sub bb} (the real and imaginary part of a nondiagonal element and the corresponding difference between diagonal elements). Transferring one of them, e.g., Rer(tilde sign){sub an}ot ={sub b}=Relambda{sub an}ot ={sub b}, erases the memory on two others from the final state of A. Generalization of these setups to a finite-accuracy transfer brings in a trade-off between the accuracy and the amount of preserved memory. This trade-off is expressed via system-independent uncertainty relations that account for local aspects of the accuracy-disturbance trade-off in quantum measurements. Thus, the general aspect of state disturbance in quantum measurements is elimination of memory on non-diagonal elements, rather than diagonalization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Condensed Constrained Nonconforming Mortar-Based Approach for Preconditioning Finite Element Discretization Problems

This paper presents and studies an approach for constructing auxiliary space preconditioners for finite element problems using a constrained nonconforming reformulation that is based on a proposed modified version of the mortar method. The well-known mortar finite element discretization method is modified to admit a local structure, providing an element-by-element or subdomain-by-subdomain assembly property. This is achieved via the introduction of additional trace finite element spaces and degrees of freedom (unknowns) associated with the interfaces between adjacent elements or subdomains. The resulting nonconforming formulation and a reduced-via-static-condensation Schur complement form on the interfaces are used in the construction of auxiliary space preconditioners for a given conforming finite element discretization problem. Overall, the properties of these preconditioners are studied and their performance is illustrated on model second order scalar elliptic problems utilizing high order elements.

97 MATHEMATICS AND COMPUTING↗

Studies of Flerovium and Element 115 Homologs with Macrocyclic Extractants

Study of the chemistry of the heaviest elements, Z ≥ 104, poses a unique challenge due to their low production cross-sections and short half-lives. Chemistry also must be studied on the one-atom-at-a-time scale, requiring automated, fast, and very efficient chemical schemes. Recent studies of the chemical behavior of copernicium (Cn, element 112) and flerovium (Fl, element 114) together with the discovery of isotopes of these elements with half-lives suitable for chemical studies have spurred a renewed interest in the development of rapid systems designed to study the chemical properties of elements with Z ≥ 114. This dissertation explores both extraction chromatography and solvent extraction as methods for development of a rapid chemical separation scheme for the homologs of flerovium (Pb, Sn, Hg) and element 115 (Bi, Sb), with the goal of developing a chemical scheme that, in the future, can be applied to on-line chemistry of both Fl and element 115. Carrier-free radionuclides, used in these studies, of the homologs of Fl and element 115 were obtained by proton activation of high-purity metal foils at the Lawrence Livermore National Laboratory (LLNL) Center for Accelerator Mass Spectrometry (CAMS): nat In(p,n) 113 Sn, nat Sn(p,n) 124 Sb, and Au(p,n) 197m,g Hg. The carrier-free activity was separated from the foils by novel separation schemes based on ion exchange and extraction chromatography techniques. Carrier-free Pb and Bi isotopes were obtained from development of a novel generator based on cation exchange chromatography using the 232 U parent to generate 212 Pb and 212 Bi. Macrocyclic extractants, specifically crown ethers and their derivatives, were chosen for these studies; crown ethers show high selectivity for metal ions. Finally. a potential chemical system for Fl was established based on the Eichrom Pb resin, and insight to an improved system based on thiacrown ethers is presented.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Iron Bonding with Light Elements: Implications for Planetary Cores Beyond the Binary System

Light element alloying in iron is required to explain density deficit and seismic wave velocities in Earth’s core. However, the light element composition of the Earth’s core seems hard to constrain as nearly all light element alloying would reduce the density and sound velocity (elastic moduli). The alloying light elements include oxidizing elements like oxygen and sulfur and reducing elements like hydrogen and carbon, yet their chemical effects in the alloy system are less discussed. Moreover, Fe-X-ray Absorption Near Edge Structure (Fe-XANES) fingerprints have been studied for silicate materials with ferrous and ferric ions, while not many X-ray absorption spectroscopy (XAS) studies have focused on iron alloys, especially at high pressures. To investigate the bonding nature of iron alloys in planetary interiors, we presented X-ray absorption spectroscopy of iron–nitrogen and iron–carbon alloys at high pressures up to 50 GPa. Together with existing literature on iron–carbon, –hydrogen alloys, we analyzed their edge positions and found no significant difference in the degree of oxidation among these alloys. Pressure effects on edge positions were also found negligible. Our theoretical simulation of the valence state of iron, alloyed with S, C, O, N, and P also showed nearly unchanged behavior under pressures up to 300 GPa. This finding indicates that the high pressure bonding of iron alloyed with light elements closely resembles bonding at the ambient conditions. We suggest that the chemical properties of light elements constrain which ones can coexist within iron alloys.

Advanced Photon Source↗

Diversity of Abundance Patterns of Light Neutron-capture Elements in Very-metal-poor Stars

We determine the abundances of neutron-capture elements from Sr to Eu for five very-metal-poor stars (−3 < [Fe/H] < −2) in the Milky Way halo to reveal the origin of light neutron-capture elements. Previous spectroscopic studies have shown evidence of at least two components in the r-process; one referred to as the “main r-process” and the other as the “weak r-process,” which is mainly responsible for producing heavy and light neutron-capture elements, respectively. Observational studies of metal-poor stars suggest that there is a universal pattern in the main r-process, similar to the abundance pattern of the r-process component of solar-system material. Still, it is uncertain whether the abundance pattern of the weak r-process shows universality or diversity, due to the sparseness of measured light neutron-capture elements. We have detected the key elements, Mo, Ru, and Pd, in five target stars to give an answer to this question. The abundance patterns of light neutron-capture elements from Sr to Pd suggest a diversity in the weak r-process. In particular, scatter in the abundance ratio between Ru and Pd is significant when the abundance patterns are normalized at Zr. Our results are compared with the elemental abundances predicted by nucleosynthesis models of supernovae with parameters such as electron fraction or proto-neutron-star mass, to investigate sources of such diversity in the abundance patterns of light neutron-capture elements. This paper presents that the variation in the abundances of observed stars can be explained with a small range of parameters, which can serve as constraints on future modeling of supernova models.

79 ASTRONOMY AND ASTROPHYSICS↗

Complexity and Productivity Differentiation Models of Metallogenic Indicator Elements in Rocks and Supergene Media Around Daijiazhuang Pb-Zn Deposit in Dangchang County, Gansu Province

With the help of complexity indices, we quantitatively studied multifractals, frequency distributions, and linear and nonlinear characteristics of geochemical data for exploration of the Daijiazhuang Pb-Zn deposit. Furthermore, we derived productivity differentiation models of elements from thermodynamics and self-organized criticality of metallogenic systems. With respect to frequency distributions and multifractals, only Zn in rocks and most elements except Sb in secondary media, which had been derived mainly from weathering and alluviation, exhibit nonlinear distributions. The relations of productivity to concentrations of metallogenic elements and paragenic elements in rocks and those of elements strongly leached in secondary media can be seen as linear addition of exponential functions with a characteristic weak chaos. The relations of associated elements such as Mo, Sb, and Hg in rocks and other elements in secondary media can be expressed as an exponential function, and the relations of one-phase self-organized geological or metallogenic processes can be represented by a power function, each representing secondary chaos or strong chaos. For secondary media, exploration data of most elements should be processed using nonlinear mathematical methods or should be transformed to linear distributions before processing using linear mathematical methods.

58 GEOSCIENCES↗

Dis3- and exosome subunit-responsive 3 Prime mRNA instability elements

Highlights: Black-Right-Pointing-Pointer Successful use of a novel RNA-specific bioinformatic tool, RNA SCOPE. Black-Right-Pointing-Pointer Identified novel 3 Prime UTR cis-acting element that destabilizes a reporter mRNA. Black-Right-Pointing-Pointer Show exosome subunits are required for cis-acting element-mediated mRNA instability. Black-Right-Pointing-Pointer Define precise sequence requirements of novel cis-acting element. Black-Right-Pointing-Pointer Show that microarray-defined exosome subunit-regulated mRNAs have novel element. -- Abstract: Eukaryotic RNA turnover is regulated in part by the exosome, a nuclear and cytoplasmic complex of ribonucleases (RNases) and RNA-binding proteins. The major RNase of the complex is thought to be Dis3, a multi-functional 3 Prime -5 Prime exoribonuclease and endoribonuclease. Although it is known that Dis3 and core exosome subunits are recruited to transcriptionally active genes and to messenger RNA (mRNA) substrates, this recruitment is thought to occur indirectly. We sought to discover cis-acting elements that recruit Dis3 or other exosome subunits. Using a bioinformatic tool called RNA SCOPE to screen the 3 Prime untranslated regions of up-regulated transcripts from our published Dis3 depletion-derived transcriptomic data set, we identified several motifs as candidate instability elements. Secondary screening using a luciferase reporter system revealed that one cassette-harboring four elements-destabilized the reporter transcript. RNAi-based depletion of Dis3, Rrp6, Rrp4, Rrp40, or Rrp46 diminished the efficacy of cassette-mediated destabilization. Truncation analysis of the cassette showed that two exosome subunit-sensitive elements (ESSEs) destabilized the reporter. Point-directed mutagenesis of ESSE abrogated the destabilization effect. An examination of the transcriptomic data from exosome subunit depletion-based microarrays revealed that mRNAs with ESSEs are found in every up-regulated mRNA data set but are underrepresented or missing from the down-regulated data sets. Taken together, our findings imply a potentially novel mechanism of mRNA turnover that involves direct Dis3 and other exosome subunit recruitment to and/or regulation on mRNA substrates.

60 APPLIED LIFE SCIENCES↗

The formation mechanisms of sedimentary pyrite nodules determined by trace element and sulfur isotope microanalysis

Redox sensitive trace elements in pyrite, including nodules, are increasingly used to infer the chemical conditions of ancient oceans—but considerable uncertainty remains regarding the mechanism and timing of nodule formation. Resolving these uncertainties is important because pyrite nodules must form in connection with the overlying water column, rather than during late diagenesis, to reflect the composition of the global ocean. Existing models for pyrite nodule formation have been specific to pyrite textures from individual sites, and we lack a unified model that can explain the compositional and textural diversity observed in nodules from different localities. In this study we examine ten pyrite nodules from several geological periods (Neoarchean to Carboniferous) using in situ LA-ICP-MS and SHRIMP-SI analyses. We present transects of spot analyses of trace elements (As, Ag, Cu, Co, Ni, Sb and Se) and S isotope ratios for each nodule. The pyrite nodules can be classified according to three main categories: those with (1) little to no trace element or isotopic zonation of the nodule from core to margin, (2) strong zonation from core to margin, and (3) minor zonation near the core but more significant zonation near the margin of the nodule. We further illustrate this zonation with a NanoSIMS element map from an additional pyrite nodule. These results are interpreted to indicate nodule formation along a spectrum between two end-member mechanisms. We suggest that the absence of trace element or isotopic zonation reflects nodule growth by a pathway that is analogous to the pervasive growth mechanism for carbonate nodules. This model involves the production of many nucleation sites that are evenly distributed within the volume that the nodule eventually occupies. Consequently, this mechanism results in a chemically homogenous nodule. Pyrites formed this way are suitable for paleoceanographic reconstruction. The other end-member mechanism is analogous to the concentric growth model for carbonate concretions. In this scenario, the core of the nodule forms first and is followed by the addition of concentric layers—each with a progressively different trace element content and δ 34 S signature as diagenesis progresses. Despite having limited utility for econstructing ancient seawater, these late forming nodules may track the evolving availability of bioessential trace elements for the subsurface biosphere with important implications for global biogeochemical cycles. Finally, spatial trends in trace elements and S isotopes thus speak to the mechanisms of pyrite nodule formation and provide a framework for evaluating nodule suitability for a range of paleoenvironmental studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Minimal multi-element stochastic collocation for uncertainty quantification of discontinuous functions

We propose a multi-element stochastic collocation method that can be applied in high-dimensional parameter space for functions with discontinuities lying along manifolds of general geometries. The key feature of the method is that the parameter space is decomposed into multiple elements defined by the discontinuities and thus only the minimal number of elements are utilized. On each of the resulting elements the function is smooth and can be approximated using high-order methods with fast convergence properties. The decomposition strategy is in direct contrast to the traditional multi-element approaches which define the sub-domains by repeated splitting of the axes in the parameter space. Such methods are more prone to the curse-of-dimensionality because of the fast growth of the number of elements caused by the axis based splitting. The present method is a two-step approach. Firstly a discontinuity detector is used to partition parameter space into disjoint elements in each of which the function is smooth. The detector uses an efficient combination of the high-order polynomial annihilation technique along with adaptive sparse grids, and this allows resolution of general discontinuities with a smaller number of points when the discontinuity manifold is low-dimensional. After partitioning, an adaptive technique based on the least orthogonal interpolant is used to construct a generalized Polynomial Chaos surrogate on each element. The adaptive technique reuses all information from the partitioning and is variance-suppressing. We present numerous numerical examples that illustrate the accuracy, efficiency, and generality of the method. When compared against standard locally-adaptive sparse grid methods, the present method uses many fewer number of collocation samples and is more accurate.

97 MATHEMATICS AND COMPUTING↗

Understanding the effect of minor alloying elements on helium bubble formation in ferritic-martensitic steels

Ferritic-martensitic steels are promising structural materials for advanced nuclear reactors. To minimize long-term radioactivity, reduced-activation ferritic-martensitic steels have been developed by substituting high-activation elements like Ni and Mo with low-activation elements such as W. However, the impact of these alloying modifications on helium bubble formation, which plays a key role in material swelling, remains unclear. Here, in this study, we compared helium bubble formation in ferritic-martensitic steel T91 and reduced-activation ferritic-martensitic steel F82H. Both materials were irradiated with sequential 100 keV, 150 keV, and 200 keV helium ions to a dose of 0.5 dpa and a helium concentration of 9,000 appm at 500°C. The helium bubbles in F82H exhibited a larger average size and a lower density than those in T91, suggesting differences in minor alloying elements may influence the bubble growth. Here, to investigate the effects of these alloying elements, we characterized radiation-induced segregation near bubbles and grain boundaries. Prominent Ni-Mn-Si enriched clusters were found near bubbles in T91, while only Mn-Si enriched clusters were found near bubbles in F82H. In addition, the obvious Cr enrichment near grain boundaries was absent around bubbles in both steels. The different segregation trends among elements revealed the variations in element diffusion mechanisms and the different sink biases between bubbles and grain boundaries. Cr enrichment near grain boundaries is mostly driven by interstitial-mediated diffusion. However, since bubble growth relies on net vacancy flux, vacancy-mediated diffusion plays a dominant role in controlling element segregation near bubbles. Therefore, Cr enrichment was not found near bubbles. Because of preferential vacancy-drag diffusion for Ni, Si and Mn, these elements were enriched near bubbles. Due to the strong binding energies of vacancies with these solute atoms, the vacancy diffusivity can be reduced near these solutes. Therefore, the more prominent Ni-Si-Mn clustered near helium bubbles in T91 lead to stronger suppression of helium bubble growth compared to F82H.

36 MATERIALS SCIENCE↗

Correlating laser-induced breakdown spectroscopy with neutron activation analysis to determine the elemental concentration in the ionome of the Populus trichocarpa leaf

The black cottonwood poplar (Populus trichocarpa) leaf ionome (inorganic trace elements and mineral nutrients) is an important aspect for determining the physiological and developmental processes contributing to biomass production. A number of techniques are used to measure the ionome, yet characterizing the leaf spatial heterogeneity remains a challenge, especially in solid samples. Laser-induced breakdown spectroscopy (LIBS) has been used to determine the elemental composition of leaves and is able to raster across solid matrixes at 10 μm resolution. Here, we evaluate the use of LIBS for solid sample leaf elemental characterization in relation to neutron activation. In fact, neutron activation analysis is a laboratory-based technique which is used by the National Institute of Standards and Technology (NIST) to certify trace elements in candidate reference materials including plant leaf matrices. Introduction to the techniques used in this research has been presented in this manuscript. Neutron activation analysis (NAA) data has been correlated to the LIBS spectra to achieve quantification of the elements or ions present within poplar leaves. The regression coefficients of calibration and validation using multivariate analysis (MVA) methodology for six out of seven elements have been determined and vary between 0.810 and 0.998. LIBS and NAA data has been presented for the elements such as, calcium, magnesium, manganese, aluminum, copper, and potassium. Chlorine was also detected but it did not show good correlation between the LIBS and NAA techniques. This research shows that LIBS can be used as a fast, high-spatial resolution technique to quantify elements as part of large-scale field phenotyping projects.

59 BASIC BIOLOGICAL SCIENCES↗

Removal of low levels of Cu from ongoing sources in the presence of other elements – Implications for remediated contaminated sediments

Mesocosms were used to research the effects of Cu influx, alone and in the presence of other elements, on sediments remediated by active caps, passive caps, and in situ treatment. Competitive interactions between Cu and other elements were investigated because contaminants often co-occur. Elements in surface water remained at significantly lower concentrations in mesocosms with apatite and mixed amendment caps than in mesocosms with passive sand caps or uncapped sediment. Element concentrations in Lumbriculus variegatus were significantly higher in untreated sediment than in active caps and significantly related to element concentrations in sediment measured by DGT probes. The cumulative toxicity of Cu mixed with other elements was greater than the toxicity of Cu alone in treatments without active caps, but the ability of active caps to control Cu was not affected by the presence of other elements. Active caps can protect remediated sediments by reducing bioavailable elements in ongoing contamination.

54 ENVIRONMENTAL SCIENCES↗

Trace element partitioning in ashes from boilers firing pure wood or mixtures of solid waste with respect to fuel composition, chlorine content and temperature

Highlights: • Different solids waste incineration is discussed in grate fired and fluidized bed boilers. • We explained waste composition, temperature and chlorine effects on metal partitioning. • Excessive chlorine content can change oxide to chloride equilibrium partitioning the trace elements in fly ash. • Volatility increases with temperature due to increase in vapor pressure of metals and compounds. • In Fluidized bed boiler, most metals find themselves in fly ash, especially for wood incineration. - Abstract: Trace element partitioning in solid waste (household waste, industrial waste, waste wood chips and waste mixtures) incineration residues was investigated. Samples of fly ash and bottom ash were collected from six incineration facilities across Sweden including two grate fired and four fluidized bed incinerators, to have a variation in the input fuel composition (from pure biofuel to mixture of waste) and different temperature boiler conditions. As trace element concentrations in the input waste at the same facilities have already been analyzed, the present study focuses on the concentration of trace elements in the waste fuel, their distribution in the incineration residues with respect to chlorine content of waste and combustion temperature. Results indicate that Zn, Cu and Pb are dominating trace elements in the waste fuel. Highly volatile elements mercury and cadmium are mainly found in fly ash in all cases; 2/3 of lead also end up in fly ash while Zn, As and Sb show a large variation in distribution with most of them residing in the fly ash. Lithophilic elements such as copper and chromium are mainly found in bottom ash from grate fired facilities while partition mostly into fly ash from fluidized bed incinerators, especially for plants fuelled by waste wood or ordinary wood chips. There is no specific correlation between input concentration of an element in the waste fuel and fraction partitioned to fly ash. Temperature and chlorine content have significant effects on partitioning characteristics by increasing the formation and vaporization of highly volatile metal chlorides. Zinc and cadmium concentrations in fly ash increase with the incineration temperature.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗