Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrical safety”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

SUbsonic Single Aft eNgine (SUSAN) Power/Propulsion System Control Architecture Updates

The development of hybrid-electric propulsion technology for transport aircraft presents opportunities for new designs that can reduce fuel consumption and greenhouse gas emissions from commercial aviation and improve on safety and reliability when compared to modern aircraft. The SUbsonic Single Aft eNgine (SUSAN) Electrofan is a conceptual design for a transport aircraft with a series/parallel partial hybrid-electric propulsion system that is being developed by NASA as a reference design for a regional transport aircraft with a high degree of electrification. The SUSAN concept incorporates multiple tightly coupled power, propulsion, and flight control systems that introduce new challenges to the control design process, requiring a hierarchical and more coordinated control architecture. This paper summarizes updates to the SUSAN Power/Propulsion System (PPS) model and control architecture made in preparation for planned flight simulator and hardware-in-the-loop testing at NASA Glenn Research Center (GRC). These updates include a new electrical power system (EPS) model based on the NASA-developed Electrical Modeling and Thermal Analysis Toolbox (EMTAT), and a new PPS control architecture that improves the operational flexibility and responsiveness of the propulsion system. The performance of the upgraded control system is also demonstrated and discussed.

SUSAN↗
DOE OSTI2023

Survey of Aging and Monitoring Concerns for Cables and Splices Due to Cable Repair and Replacement

The purpose of this report is to survey aging and monitoring concerns for electrical cable splices in nuclear power plants (NPPs) in long term operation. As portions of existing electrical cable runs in nuclear are replaced over time due to localized events, the total number of splices in NPPs is expected to increase. Relative to cables, the body of knowledge regarding aging of splices and splices in combination with aging cables in nuclear service environments in long-term operations is low. A few reports have considered the aging of cable system components other than cables (Jacobus 1990; Nelson 1998; Villaran and Lofaro 2002), but the nuclear industry has two decades of operating experience since these were published to further enlighten this issue. Herein we discuss electrical cables and splices commonly found in U.S. nuclear power plants, their qualification in safety-related application, and methods for monitoring their health condition. Common environmental stresses that can give rise to cable and splice failure are discussed. The Nuclear Regulatory Commission (NRC) Licensee Event Reports (LER) database was used to identify documented issues of cable and splice failure. The trend in the resultant data over time is considered to see if failures are increasing as plants age. Observations and conclusions of this work include: 1. Cables and splices are highly reliable components. Occurrence rates for events of interest were low and nearly constant over the last 20 years. 2. Common-cause failure for evaluated cable events of interest was observed to primarily be associated with loose connections, which may manifest associated with workmanship issues, thermal cycling, and/or vibration. 3. Replacement of cables is more common than repair, leading to an increase in proportion of new generation cables in the plant over time. 4. Splices on degraded cables have been observed to be problematic. Due to aging NPP infrastructure, including electrical cables, it is expected that such issues will continue to increase. 5. Condition monitoring approaches, while shown to be fruitful for cables, have been shown to be insensitive to degradation of splice sleeves, which are critical to the continued performance of splices. Additional condition monitoring (CM) work is needed to evaluate methods which are sensitive to the degradation of splice components. 6. Extended Material Degradation Assessment (EMDA) knowledge gaps for electrical cables (Bernstein et al. 2014) have not been investigated for splices but may represent similar concerns such as for the accelerated aging process historically used in environmental qualification.

42 ENGINEERING↗
DOE OSTI2025

Gas-solid reaction-based selective lithium leaching strategy for efficient LiFePO 4 recycling

As the electric-vehicle market continues to expand, LiFePO 4 (LFP) batteries, valued for their intrinsic safety and cost-effectiveness, are being increasingly utilized. However, this widespread adoption highlights the urgent need for innovative and environmentally friendly recycling methods for spent LFP batteries due to their relatively low material value and the environmental challenges associated with traditional recycling processes. Here, in this study, we present a novel selective lithium leaching technique that involves a gas–solid reaction with chlorine gas. This method achieves a remarkable leaching efficiency of 99.8 % and a selectivity of 98.8 % at 200 °C within just 10 min, without generating acidic wastewater. The resulting LiCl solution was successfully converted into Li 2 CO 3 with an excellent purity of 99.5 %, while producing NaCl solution as the only byproduct. Notably, the olivine structure of the LFP was preserved as FePO 4 after lithium leaching. The regenerated LFP demonstrated excellent performance, retaining 94.1 % of its capacity after 150 cycles, while the lithium-leached FePO 4 delivered a reversible capacity exceeding 150 mAh/g. This approach not only enhances the efficiency of LFP recycling but also paves the way for more sustainable battery technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nondestructive Analysis of Commercial Batteries

Electrochemical batteries play a crucial role for powering portable electronics, electric vehicles, large-scale electric grids, and future electric aircraft. However, key performance metrics such as energy density, charging speed, lifespan, and safety raise significant consumer concerns. Enhancing battery performance hinges on a deep understanding of their operational and degradation mechanisms, from material composition and electrode structure to large-scale pack integration, necessitating advanced characterization methods. These methods not only enable improved battery performance but also facilitate early detection of substandard or potentially hazardous batteries before they cause serious incidents. Here, this review comprehensively examines the operational principles, applications, challenges, and prospects of cutting-edge characterization techniques for commercial batteries, with a specific focus on in situ and operando methodologies. Furthermore, it explores how these powerful tools have elucidated the operational and degradation mechanisms of commercial batteries. By bridging the gap between advanced characterization techniques and commercial battery technologies, this review aims to guide the design of more sophisticated experiments and models for studying battery degradation and enhancement.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Analysis of AP1000 Small-Break Loss-of-Coolant Accident Using Reactor Transient Simulator

The Westinghouse Electric Company’s Advanced Passive Reactor (AP1000) is characterized by the incorporation of passive safety systems (PSSs) designed to ensure core cooling during transient events. The assessment of PSSs requires evaluation of their performance through a combination of experiments and simulations employing various thermal-hydraulic codes. In addition, detailed evaluation of PSSs for a specific reactor system transient analysis such as loss-of-coolant-accident analysis supports understanding representative integral effects test facility development and the further evolution model development and assessment process. Developing a reactor system code is a complex and time-consuming process that requires significant engineering expertise and effort. It can take several months to even years to complete in the early stages of reactor system design and analysis. However, this process can be expedited through the use of transient simulator models for similar reactor systems, which can be used for lesson learning and training purposes. This study uses the Personal Computer Transient Analyzer (PCTRAN) code. The main advantage of PCTRAN is its ease of use and ability to run faster than real time. This study presents the results obtained for a small-break loss-of-coolant accident (SBLOCA) for two breaks using the full version (licensed) of PCTRAN. The purpose of this investigation is to evaluate the overall system behavior during the postulated SBLOCA event as well as assess the capability of the PCTRAN code to reproduce the system response during transient events. The obtained results were compared with the Westinghouse NOTRUMP system code. The PCTRAN code proved to be reliable in predicting the qualitative behavior of the system in both transient cases. As for the system response, it was found that it is contingent on the activation time of the PSSs. The differences in reactor coolant system pressure between the two codes were attributed to the critical flow model and simplification of mass and energy balance. Despite PCTRAN’s limitations, it can still provide a reasonable prediction of various reactor parameters such as pressure, mass flow rate, and void fraction during a SBLOCA scenario. It is worth noting that PCTRAN currently employs a bulk approach similar to that of the Modular Accident Analysis Program (MAAP) and MELCOR codes. However, the upcoming version of PCTRAN will include an artificial intelligence–based detection and accident prevention system, as well as different models for different reactor components. Consequently, PCTRAN has the potential to be upgraded to match the system thermal-hydraulic codes of the U.S. Nuclear Regulatory Commission and become more widely used in cybersecurity to safeguard nuclear power plants from cyberattacks.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1977

SCAR arrow-wing active flutter suppression system

The potential performance and direct operating cost benefits of an active flutter suppression system (FSS) for the NASA arrow-wing supersonic cruise configuration were determined. A FSS designed to increase the flutter speed of the baseline airplane 20 percent. A comparison was made of the performance and direct operating cost between the FSS equipped aircraft and a previously defined configuration with structural modifications to provide the same flutter speed. Control system synthesis and evaluation indicated that a FSS could provide the increase in flutter speed without degrading airplane reliability, safety, handling qualities, or ride quality, and without increasing repeated loads or hydraulic and electrical power capacity requirements.

Gordon, C. K.↗
NASA NTRS1977

Applications of thermal infrared imagery for energy conservation and environmental surveys

The survey procedures, developed during the winter and summer of 1976, employ color and color infrared aerial photography, thermal infrared imagery, and a handheld infrared imaging device. The resulting imagery was used to detect building heat losses, deteriorated insulation in built-up type building roofs, and defective underground steam lines. The handheld thermal infrared device, used in conjunction with the aerial thermal infrared imagery, provided a method for detecting and locating those roof areas that were underlain with wet insulation. In addition, the handheld infrared device was employed to conduct a survey of a U.S. Army installation's electrical distribution system under full operating loads. This survey proved to be cost effective procedure for detecting faulty electrical insulators and connections that if allowed to persist could have resulted in both safety hazards and loss in production.

Carney, J. R.↗
NASA NTRS1979

Phase 1 of the near team hybrid passenger vehicle development program. Appendix C: Preliminary design data package. Volume 2: Appendices

The design, development, efficiency, manufacturability, production costs, life cycle cost, and safety of sodium-sulfur, nickel-zinc, and lead-acid batteries for electric hybrid vehicles are discussed. Models are given for simulating the vehicle handling quality, and for finding the value of: (1) the various magnetic quantities in the different sections in which the magnetic circuit of the DC electric machine is divided; (2) flux distribution in the air gap and the magnetization curve under load conditions; and (3) the mechanical power curves versus motor speed at different values of armature current.

Piccolo, R.↗
NASA NTRS1980

Health and safety: Preliminary comparative assessment of the Satellite Power System (SPS) and other energy alternatives

Data readily available from the literature were used to make an initial comparison of the health and safety risks of a fission power system with fuel reprocessing; a combined-cycle coal power system with a low-Btu gasifier and open-cycle gas turbine; a central-station, terrestrial, solar photovoltaic power system; the satellite power system; and a first-generation fusion system. The assessment approach consists of the identification of health and safety issues in each phase of the energy cycle from raw material extraction through electrical generation, waste disposal, and system deactivation; quantitative or qualitative evaluation of impact severity; and the rating of each issue with regard to known or potential impact level and level of uncertainty.

Habegger, L. J.↗
NASA NTRS1982

Design description of the Tangaye Village photovoltaic power system

The engineering design of a stand alone photovoltaic (PV) powered grain mill and water pump for the village of Tangaye, Upper Volta is described. The socioeconomic effects of reducing the time required by women in rural areas for drawing water and grinding grain were studied. The suitability of photovoltaic technology for use in rural areas by people of limited technical training was demonstrated. The PV system consists of a 1.8-kW (peak) solar cell array, 540 ampere hours of battery storage, instrumentation, automatic controls, and a data collection and storage system. The PV system is situated near an improved village well and supplies d.c. power to a grain mill and a water pump. The array is located in a fenced area and the mill, battery, instruments, controls, and data system are in a mill building. A water storage tank is located near the well. The system employs automatic controls which provide battery charge regulation and system over and under voltage protection. This report includes descriptions of the engineering design of the system and of the load that it serves; a discussion of PV array and battery sizing methodology; descriptions of the mechanical and electrical designs including the array, battery, controls, and instrumentation; and a discussion of the safety features. The system became operational on March 1, 1979.

Martz, J. E.↗
NASA NTRS1987

The results of application studies for space nuclear power

The results are summarized of the studies over the last several years to identify and characterize potential applications for the SP-100 space nuclear reactor power system in powering spacecraft. SP-100 is a space power system based on a fast spectrum nuclear reactor with thermoelectric power conversion and liquid metal and heat pipe thermal transport. SP-100 reactor systems are designed to provide electric power with user designated characteristics at levels in the range from 10 to 1000 kWe. The use of nuclear reactors such as SP-100 as a power source provides a potential means of providing uninterrupted electrical power as required for many of todays space missions within acceptable cost and safety constraints.

Isenberg, L.↗
NASA NTRS1987

Past, present, and future activities in space power technology in the United States of America

Space power technology research in the U.S. is examined. The objectives for advanced power systems are long life, safety, flexibility, modularity, growth capability, and autonomy. Research in the areas of photovoltaic arrays, electrical energy storage, and the development of solar dynamic power systems and radio thermal generators is described. The applications of advances in power generation, energy storage, and power management and distribution to the Space Station are discussed.

Ambrus, Judith H.↗
NASA NTRS1995

Improved Spline Coupling For Robotic Docking

Robotic docking mechanism like one described in "Self-Aligning Mechanical and Electrical Coupling" (GSC-13430) improved. Spline coupling redesigned to reduce stresses, enchancing performance and safety of mechanism. Does not involve significant increase in size. Convex spherical surfaces on spline driver mate with concave spherical surfaces on undersides on splines in receptacle. Spherical surfaces distribute load stresses better and tolerate misalignments better than flat and otherwise shaped surfaces.

Vranish, John M.↗
NASA NTRS2003

A Brighter Choice for Safety

Emergency exit signs can be lifesavers, but only if they remain visible when people need them. All too often, power losses or poor visibility can render the signs ineffective. Luna Technologies International, Inc., of Kent, Washington, is shining new light on this safety issue. The company s LUNAplast(trademark) product line illuminates without the need for electricity, maintenance, or a power connection. LUNAplast, which benefited from tests conducted at Johnson Space Center, is so successful that NASA engineers selected it for the emergency exit pathway indicators on the International Space Station (ISS).

Source record↗
NASA NTRS2021

NASA Engineering and Safety Center Technical Bulletin No. 19-01-1: Mitigating Risks of Single-Event Effects in Space Applications

Since most Electrical, Electronic, and Electromechanical (EEE) parts are intended for terrestrial applications, they are susceptible to a range of radiation threats in the space environment if the resulting effects are not properly characterized and mitigated. Even specially designed radiation-hardened parts may not be tolerant to all types of radiation effects. Radiation hardness is a multi-dimensional property of any part that describes intrinsic abilities to tolerate various radiation environments [1,2]. Effects to be concerned with include total ionizing dose, total non-ionizing dose, and single-event effects (SEE) – all of which depend on the mission, environment, application, and lifetime. Radiation effects concerns may be the same whether a EEE part is Commercial-Off-The-Shelf (COTS), MIL-SPEC, or some other variant, all of which are susceptible to the same radiation threats [3]. SEE consequences range from recoverable faults to catastrophic failure. Like other random faults, SEE can be mitigated with informed circuit design practices at the device, card, and/or system level.

Single-event effects↗
DOE OSTI2026

Playa de Ponce's Advancements in Energy Affordability and Reliability

Un Nuevo Amanecer Inc. (UNA), a community-based nonprofit organization, partnered with the U.S. Department of Energy's Energy Technology Innovation Partnership Project (ETIPP) to develop a Strategic Energy Plan (SEP) for the community of Playa de Ponce on the southern coast of Puerto Rico. The SEP provides a community-driven roadmap to improve local energy systems by identifying shared priorities, strategies, and actions that support a more reliable, affordable, and resilient energy future. Over a seven-month period, researchers from the National Laboratory of the Rockies (NLR) worked with UNA, the Puerto Rico Hispanic Federation, community leaders, and residents to gather input through engagement workshops held in March and June 2025. These discussions helped define the community's energy vision and identify key challenges, including high electricity costs, unreliable service during extreme weather events, and risks to public health and safety - particularly for the community's aging population. This fact sheet summarizes the key elements of the Strategic Energy Plan, including four priority strategies organized around three focus areas identified by the community: energy reliability, safety and security, and stakeholder participation, education, and capacity building. Together, these strategies outline actionable pathways to strengthen Playa de Ponce's energy resilience and support long-term community goals. The plan serves as a shared reference for community members, local organizations, and government partners working to advance energy solutions in Playa de Ponce and complements broader municipal and island-wide planning efforts.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Playa de Ponce's Advancements in Energy Affordability and Reliability (Spanish Translation)

Un Nuevo Amanecer Inc. (UNA), a community-based nonprofit organization, partnered with the U.S. Department of Energy's Energy Technology Innovation Partnership Project (ETIPP) to develop a Strategic Energy Plan (SEP) for the community of Playa de Ponce on the southern coast of Puerto Rico. The SEP provides a community-driven roadmap to improve local energy systems by identifying shared priorities, strategies, and actions that support a more reliable, affordable, and resilient energy future. Over a seven-month period, researchers from the National Laboratory of the Rockies (NLR) worked with UNA, the Puerto Rico Hispanic Federation, community leaders, and residents to gather input through engagement workshops held in March and June 2025. These discussions helped define the community's energy vision and identify key challenges, including high electricity costs, unreliable service during extreme weather events, and risks to public health and safety - particularly for the community's aging population. This fact sheet summarizes the key elements of the Strategic Energy Plan, including four priority strategies organized around three focus areas identified by the community: energy reliability, safety and security, and stakeholder participation, education, and capacity building. Together, these strategies outline actionable pathways to strengthen Playa de Ponce's energy resilience and support long-term community goals. The plan serves as a shared reference for community members, local organizations, and government partners working to advance energy solutions in Playa de Ponce and complements broader municipal and island-wide planning efforts. This is the Spanish translation of NLR/FS-7A40-99609.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗