Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “edge effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Longitudinal aerodynamic characteristics of a vectored-engine-over-wing configuration at subsonic speeds

The Langley V/STOL tunnel was used to determine the effects of vectoring exhaust flow on the longitudinal aerodynamic characteristics of a vectored-engine-over-wing configuration. Vectoring was accomplished by blowing from over-wing-mounted engines over a variable trailing-edge flap. Effects of varying canard geometry and wing leading-edge geometry were investigated. Wind-tunnel data were obtained at a Mach number of 0.186 for an angle-of-attack range from -20 deg to 24 deg and engine nozzle pressure ratios from 1.0 (jet off) to approximately 3.75.

Leavitt, L. D.↗
NASA NTRS1992

Distortion of a flat-plate boundary layer by free-stream vorticity normal to the plate

A nominally uniform flow over a semiinfinite flat plate is considered. The analysis shows how a small streamwise disturbance in the otherwise uniform flow ahead of the plate is amplified by leading-edge bluntness effects and eventually leads to a small-amplitude but nonlinear spanwise motion far downstream from the leading edge of the plate. This spanwise motion is then imposed on the viscous boundary-layer flow at the surface of the plate - causing an order-one change in its profile shape. This ultimately reduces the wall shear stress to zero, causing the boundary layer to undergo a localized separation, which may be characterized as a kind of bursting phenomenon that could be related to the turbulent bursts observed in some flat-plate boundary-layer experiments.

Goldstein, M. E.↗
NASA NTRS2013

Method for Processing Lunar Regolith Using Microwaves

A paper describes a method of using microwave heating experiments on lunar simulants to determine the mechanism that causes lunar regolith to be such an excellent microwave absorber. The experiments initially compared the effects of sharp particle edges to round particle edges on the heating curves. For most compositions, sharp particle edged samples were more effective in being heated by microwaves than round particle edged materials. However, the experiments also showed an unexpected effect for both types of particles. Upon heating the sample surface above 400 C, the sample experienced some sort of internal structure change that caused it to heat much more efficiently. This enhancement may be associated with the unique microwave volumetric heating that can produce a large temperature gradient within the sample leading to melting of some components at the center of the sample. This new effect that may also be happening in lunar regolith samples is probably the cause of the previously observed enhanced heating of a sample of lunar regolith. Properly designed microwave applicators could heat and solidify the lunar regolith to form roads and building blocks for structures needed on the Moon

Barmatz, Martin B.↗
NASA NTRS1992

Effect of airfoil (trailing-edge) thickness on the numerical solution of panel methods based on the Dirichlet boundary condition

The practical limit of airfoil thickness ratio for which acceptable engineering results are obtainable with the Dirichlet boundary-condition-based numerical methods is investigated. This is done by studying the effect of thickness on the calculated pressure distribution near the trailing edge and by comparing the aerodynamic coefficients with available exact solutions. The first objective of this study, owing to the wide use of such computational methods, is to demonstrate the numerical symptoms that occur when the body or wing thickness approaches zero and to increase the awareness of potential users of these methods. Additionally, an effort is made to obtain the practical limits of the trailing-edge thickness where such problems will appear in the flow solution, and to propose some possible cures for very thin airfoils or those with cusped trailing edges.

Yon, Steven↗
NASA NTRS1990

The effect of small streamwise velocity distortion on the boundary layer flow over a thin flat plate with application to boundary layer stability theory

Researchers show how an initially linear spanwise disturbance in the free stream velocity field is amplified by leading edge bluntness effects and ultimately leads to a small amplitude but linear spanwise motion far downstream from the edge. This spanwise motion is imposed on the boundary layer flow and ultimately causes an order-one change in its profile shape. The modified profiles are highly unstable and can support Tollmein-Schlichting wave growth well upstream of the theoretical lower branch of the neutral stability curve for a Blasius boundary layer.

Goldstein, M. E.↗
NASA NTRS2009

Longitudinal Proximity Effects in Superconducting Transition-Edge Sensors

We have found experimentally that the critical current of a square superconducting transition-edge sensor (TES) depends exponentially upon the side length L and the square root of the temperature T. As a consequence, the effective transition temperature T(sub c) of the TES is current-dependent and at fixed current scales as 1/L(sup 2). We also have found that the critical current can show clear Fraunhofer-like oscillations in an applied magnetic field, similar to those found in Josephson junctions. The observed behavior has a natural theoretical explanation in terms of longitudinal proximity effects if the TES is regarded as a weak link between superconducting leads. We have observed the proximity effect in these devices over extraordinarily long lengths exceeding 100 microns.

Sadleir, John E.↗
NASA NTRS1976

Effects of nozzle exit location and shape propulsion-induced aerodynamic characteristics due to vectoring twin nozzles at Mach numbers from 0.40 to 1.2

An investigation was conducted in the Langley 16-foot transonic tunnel to determine the induced lift characteristics of a vectored-thrust concept in which jet-exhaust nozzles were located in the fuselage at or near the wing trailing edge. The effects of moving twin rectangular nozzles rearward from the wing trailing edge and of round nozzles at the trailing edge only were studied at Mach numbers from 0.4 to 1.2, angles of attack up to 14 deg, and thrust coefficients up to 0.35. Nozzle deflection angle varied from 0 deg to 45 deg. Separate force balances were used to determine both total aerodynamic and thrust forces and thrust forces alone which allowed for a direct measurement of jet turning angle at forward speeds. The Reynolds number per meter varied from 8.20 x 1 million to 13.12 x 1 million.

Capone, F. J.↗
DOE OSTI2021

Quantum Size Effects, Multiple Dirac Cones, and Edge States in Ultrathin Bi(110) Films

The presence of inherently strong spin–orbit coupling in bismuth, its unique layer-dependent band topology and high carrier mobility make it an interesting system for both fundamental studies and applications. Theoretically, it has been suggested that strong quantum size effects should be present in the Bi(110) films, with the possibility of Dirac Fermion states in the odd-bilayer (BL) films, originating from dangling p z orbitals and quantum-spin hall (QSH) states in the even-bilayer films. However, the experimental verification of these claims has been lacking. Here, we study the electronic structure of Bi(110) films grown on a high-T c superconductor, Bi 2 Sr 2 CaCu 2 O 8+δ (Bi2212) using angle-resolved photoemission spectroscopy (ARPES). We observe an oscillatory behavior of electronic structure with the film thickness and identify the Dirac-states in the odd-bilayer films, consistent with the theoretical predictions. In the even-bilayer films, we find another Dirac state that was predicted to play a crucial role in the QSH effect. In the low thickness limit, we observe several extremely one-dimensional states, probably originating from the edge-states of Bi(110) islands. Our results provide a much needed experimental insight into the electronic and structural properties of Bi(110) films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1991

The effect of a red leaf pigment on the relationship between red edge and chlorophyll concentration

The effect of a leaf pigment - red amaranthin - on red edge and chlorophyll concentration is investigated in amaranth leaves by means of treatments with nitrate and salts. A near-linear relationship between red edge and chlorophyll concentration is observed for leaves with low amaranthin concentration, and no relationship is noted at high concentrations. The study demonstrates the limitation inherent in estimating chlorophyll concentration by using remotely sensed red edge.

Curran, Paul J.↗
NASA NTRS1975

Analysis of the effects on life of leading-edge holes in an airfoil subjected to arbitrary spanwise and chordwise temperature distributions

The effects of temperature gradients, cooling-hole rim and bulk metal temperatures, and mechanical stress were investigated by using a finite-element structural analysis of a symmetrical airfoil with and without leading-edge holes. The results indicate that leading-edge film cooling is beneficial when large chordwise temperature gradients exist and if the cooling-hole rim temperatures are above the bulk metal temperature. The effects of film cooling at other locations on the airfoil were not considered, and the relative merits of convection or film cooling at the leading edge, in terms of allowable turbine inlet temperature or coolant flow requirements, were not evaluated.

Kaufman, A.↗
DOE OSTI2024

The formation of an radial edge electric field due to finite ion orbit width effects is the possible root cause of the H-mode edge

Abstract Full orbit-following simulations of thermal ions show that finite ion-orbit width effects create charge separation near the last closed flux surface (LCFS) which generates a localized radial electric field. Experimentally, edge electric fields are observed in H-mode plasmas and they are necessary for the edge turbulence suppression via the E × B flow shear mechanism. Confined trapped (and to a lesser extent co-passing) ions near the plasma edge form a positive charge distribution outside the LCFS, while thermal electrons are tied more tightly to field lines owing to their small mass and are poorly confined outside the LCFS, hence charge neutrality is violated outside the LCFS. A large number of reported observations from spherical and conventional tokamaks support the results from the simulations although the simulations were not performed fully self consistently. The results suggest ways to lower the H-mode power threshold and optimize the H-mode plasma edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2004

Modeling the Nonlinear, Strain Rate Dependent Deformation of Shuttle Leading Edge Materials with Hydrostatic Stress Effects Included

An analysis method based on a deformation (as opposed to damage) approach has been developed to model the strain rate dependent, nonlinear deformation of woven ceramic matrix composites, such as the Reinforced Carbon Carbon (RCC) material used on the leading edges of the Space Shuttle. In the developed model, the differences in the tension and compression deformation behaviors have also been accounted for. State variable viscoplastic equations originally developed for metals have been modified to analyze the ceramic matrix composites. To account for the tension/compression asymmetry in the material, the effective stress and effective inelastic strain definitions have been modified. The equations have also been modified to account for the fact that in an orthotropic composite the in-plane shear response is independent of the stiffness in the normal directions. The developed equations have been implemented into LS-DYNA through the use of user defined subroutines (UMATs). Several sample qualitative calculations have been conducted, which demonstrate the ability of the model to qualitatively capture the features of the deformation response present in woven ceramic matrix composites.

Goldberg, Robert K.↗
DOE OSTI2025

Investigation of radiated-power for low aspect ratio fusion plasmas

Investigating radiated power in fusion plasmas is of utmost importance to understand the effect of undesired impurities, such as metals, in present devices, or also desired impurities, such as noble gasses, to purposefully radiate a large fraction of power in future devices. These studies are especially important for high Z impurities which will play a crucial role in future generation fusion pilot plants. In this work, we have developed a power radiation analysis module, which is used to investigate 2D distributions of impurity densities and radiated power asymmetries caused due to both plasma rotation and the cooling rate dependence on temperature profile for the cases of experimental NSTX plasmas and designed scenarios for the spherical tokamak advanced reactor (STAR), both being low aspect ratio tokamaks. Two different atomic databases have been tested during this work to study their impact on the radiated power distribution, especially for high Z impurities. Also in PRAM, self-consistent calculations of two-dimensional electron, main ion, and impurity ion densities are carried out using one-dimensional input density, temperature, and rotation profiles. In the case of NSTX, discharges with high rotation of ∼ 170 km s, measured with charge exchange recombination spectroscopy, have been investigated. Rotation-induced charge separation, leading to an electrostatic potential, is calculated iteratively to a self-consistent solution while testing high Z impurities to observe any 2D asymmetry in the core radiated power due to centrifugal forces. The STAR design, being much larger (R = 4 m), is projected to have a much lower rotation, and is shown to have low rotation-induced asymmetries, on the order of ten percent or less, between the low field and high field sides. However, another effect not due to rotation but to the dependence of impurity cooling rates on temperature can lead to radiation peaking off-axis, near the plasma edge. This effect is noticeable for argon in NSTX, for example, but can also be enhanced for certain impurities at much higher temperatures projected for STAR (T e0 ~ 32 keV), for example for undesired tungsten or possibly desired xenon.

NSTX↗
NASA NTRS1980

Optical considerations in infrared heterodyne spectrometer design

The optical design considerations for optimization of sensitivity, tunability, and versatility of an infrared heterodyne spectrometer are discussed using the GSFC CO2 laser heterodyne spectrometer optical front end as an example. Problems related to the coherent nature of the laser local oscillator beam (e.g., interference effects at edges of optical elements and at the beam combining beamsplitter) are described and proper beamsplitter design discussed. Optimum matching to the telescope is discussed. The severe effects of large central obscuration on the coherent telescope efficiency are described and steps to partially recover the lost system sensitivity are proposed. Measurements made with the GSFC 48 inch telescope (linear obscuration rate = 0.5) and the KPNO McMathe telescope (no obscuration) are given as examples.

Kostiuk, T.↗
NASA NTRS1985

Turbulent flow around a wing-fuselage type juncture

The flow over a 58-mm-thick uniform-thickness winglike body having a 1.5:1 elliptical leading edge and joined to a large flat plate (representing an aircraft fuselage) is characterized experimentally at freestream velocity 15 m/s, corresponding to Reynolds number 940,000/m, using hot-wire anemometry. The results are presented graphically, and it is found that the horseshoe vortex formed by the separation of the fuselage boundary layer ahead of the wing leading edge is effective in transporting turbulence and modifying the mean-flow characteristics and the turbulent-stress distribution. It is suggested that the slenderness ratio of the leading edge is the dominant factor affecting the strength and location of the vortex.

Kubendran, L. R.↗
DOE OSTI2021

Propagation of radio frequency waves through turbulent plasmas

The practical and economic viability of tokamak fusion reactors depends, in a significant way, on the efficiency of radio frequency (RF) waves to deliver energy and momentum to the plasma in the core of the reactor. The RF electromagnetic waves, excited by antenna structures placed near the wall of a tokamak, have to propagate through the turbulent edge plasma along their path to the core of the fusion device. In present day experiments, the radial width of the edge region and scrape-off layer is of the order of a few centimeters. In ITER, and in future fusion reactors, this width will be of the order of tens of centimeters. Any effects on RF waves due to plasma turbulence have to be properly understood in order to optimize the delivery of RF energy and momentum into the core. This paper is on a multi-pronged, theoretical and computational, approach that is being pursued to quantify the effect of edge plasma turbulence on the propagation of RF waves. The theoretical and analytical models are based on solutions of the Faraday-Ampere equation in a magnetized plasma and on the Kirchhoff tangent plane approximation. An effective medium approach has been developed so as to approximate the permittivity of a turbulent plasma by analytical expressions. The computations are being carried out with a newly developed code ScaRF that is based on the finite difference finite domain technique for solving Maxwell's equations. The plasma permittivity can be assigned as desired. The code is being used to validate the analytical and theoretical models and to evaluate their limitations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

Electron distributions in the plasma sheet boundary layer - Time-of-flight effects

The electron edge of the plasma sheet boundary layer lies lobeward of the ion edge. Measurements obtained near the electron edge of the boundary layer reveal low-speed cutoffs for earthward and tailward-flowing electrons. These cutoffs progress to lower speeds with deeper penetration into the boundary layer, and are consistently lower for the earthward-directed electrons than for the tailward-direction electrons. The cutoffs and their variation with distance from the edge of the boundary layer can be consistently interpreted in terms of a time-of-flight effect on recently reconnected magnetic field lines. The observed cutoff speeds are used to estimate the downtail location of the reconnection site.

Onsager, T. G.↗