Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamical model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Analytical and Experimental Determination of the Coupled Natural Frequencies and Mode Shapes of a Dynamic Model of a Single-Rotor Helicopter

A combined analytical and experimental determination is made of the coupled natural frequencies and mode shapes in the longitudinal plane of symmetry for a dynamic model of a single-rotor helicopter. The analytical phase is worked out on the basis of a seven-degree-of-freedom system combining elastic deflections of the rotor blades, rotor shaft, pylon, and fuselage. The calculated coupled frequencies are first compared with calculated uncoupled frequencies to show the general effects of coupling and then with measured coupled frequencies to determine the extent to which the coupled frequencies can be calculated. The coupled mode shapes are also calculated and were observed visually with stroboscopic lights during the tests. A comparison of the coupled and uncoupled natural frequencies shows that significant differences exist between these frequencies for some of the modes. Good agreement is obtained between the measured and calculated values for the coupled natural frequencies and mode shapes. The results show that the coupled natural frequencies and mode shapes can be determined by the analytical procedure presented herein with sufficient accuracy if the mass and stiffness distributions of the various components of the helicopter are known.

Silveira, Milton A.↗

Developing an ELM Ecosystem Dynamics Model on GPU with OpenACC

Porting a complex scientific code, such as the E3SM land model (ELM), onto a new computing architecture is challenging. The paper presents design strategies and technical approaches to develop an ELM ecosystem dynamics model with compiler directives (OpenACC) on NVIDIA GPUs. The code has been refactored with advanced OpenACC features (such as deepcopy and routine directives) to reduce memory consumption and to increase the levels of parallelism through parallel loop reconstruction and new data structures. As a result, the optimized parallel implementation achieved more than a 140-time speedup (50 ms vs 7600 ms), compared to a naive implementation that uses OpenACC routine directive and parallelizes the code across existing loops on a single NVIDIA V100. On a fully loaded computing node with 44 CPUs and 6 GPUs, the code achieved over a 3.0-times speedup, compared to the original code on the CPU. Furthermore, the memory footprint of the optimized parallel implementation is 300 MB, which is around 15% of the 2.15 GB of memory consumed by a naive implementation. This study is the first effort to develop the ELM component on GPUs efficiently to support ultra-high-resolution land simulations at continental scales.

Schwartz, Peter↗

Embedded Sensors and Controls to Improve Component Performance and Reliability - System Dynamics Modeling and Control System Design

This report documents the current status of the modeling, control design, and embedded control research for the magnetic bearing canned rotor pump being used as a demonstration platform for deeply integrating instrumentation and controls (I&C) into nuclear power plant components. This pump is a highly inter-connected thermo/electro/mechanical system that requires an active control system to operate. Magnetic bearings are inherently unstable system and without active, moment by moment control, the rotor would contact fixed surfaces in the pump causing physical damage. This report details the modeling of the pump rotordynamics, fluid forces, electromagnetic properties of the protective cans, active magnetic bearings, power electronics, and interactions between different dynamical models. The system stability of the unforced and controlled rotor are investigated analytically. Additionally, controllers are designed using proportional derivative (PD) control, proportional integral derivative (PID) control, voltage control, and linear quadratic regulator (LQR) control. Finally, a design optimization problem that joins the electrical, mechanical, magnetic, and control system design into one problem to balance the opposing needs of various design criteria using the embedded system approach is presented.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Assessment of aerodynamic and dynamic models in a comprehensive analysis

The history, status, and lessons of a comprehensive analysis for rotorcraft are reviewed. The development, features, and capabilities of the analysis are summarized, including the aerodynamic and dynamic models that were used. Examples of correlation of the computational results with experimental data are given, extensions of the analysis for research in several topics of helicopter technology are discussed, and the experiences of outside users are summarized. Finally, the required capabilities and approach for the next comprehensive analysis are described.

Johnson, W.↗

Empirical Dynamic Modeling Reveals Complexity of Methane Fluxes in a Temperate Salt Marsh

Abstract Methane dynamics within salt marshes are complex because vegetation types, temperature, oscillating water levels, and changes in salinity and redox conditions influence CH 4 production, consumption, oxidation, and emissions. These non‐linear and complex interactions among variables affect the traditionally expected functional relationships and present challenges for interpreting and developing process‐based models. We employed empirical dynamic modeling (EDM) and convergent cross mapping (CCM) as a novel approach for characterizing seasonal/multiday and diurnal CH 4 dynamics by inferring causal variables, lags, and interconnections among multiple biophysical variables within a temperate salt marsh using 5 years of eddy covariance data. EDM/CCM is a nonparametric approach capable of quantifying the coupling between variables while determining time scales where variable interactions are the most relevant. We found that gross primary productivity, tidal creek dissolved oxygen, and temperature were important for seasonal/multiday dynamics (rho = 0.73–0.80), while water level was most important for diurnal dynamics during both the growing and dormancy phenoperiods (rho = 0.72 and 0.56, respectively). Lags for the top‐ranked variables (i.e., gross primary productivity, dissolved oxygen, temperature, water level) occurred between 1 and 5 weeks at the seasonal scale and 1–24 hr at the diurnal scale. The EDM had high prediction capabilities for intra‐/inter‐seasonal patterns and annual CH 4 sums but had limitations in representing large, infrequent fluxes. Results highlight the importance of non‐linearity, drivers, lag times, and interconnections among multiple biophysical variables that regulate CH 4 fluxes in tidal wetlands. This research introduces a novel approach to examining CH 4 fluxes, which will aid in evaluating current paradigms in wetlands and other ecosystems.

Environmental Sciences & Ecology↗

The dynamic modelling of a slotted test section

A mathematical model of the wind tunnel dynamics was developed. The modelling techniques were restricted to the use of one dimensional unsteady flow. The dynamic characteristics of slotted test section incorporated into the model are presented.

Gumas, G.↗

Dynamic modeling and transient studies of a solid-sorbent adsorber for CO{sub 2} capture

The U.S. Department of Energy’s Carbon Capture Simulation Initiative (CCSI) is dedicated to accelerating the commercialization of carbon capture technologies from discovery to development, demonstration, and ultimately the widespread deployment to hundreds of power plants. In this multi-lab initiative in partnership with academic and industrial institutions, the National Energy Technology Laboratory (NETL) leads the development of a multi-scale modeling and simulation toolset for rapid evaluation and deployment of carbon capture systems. One element of the CCSI is focused on optimizing the operation and control of carbon capture systems since this can have a significant impact on the extent and the rate at which commercial-scale capture processes will be scaled-up, deployed, and used in the years to come. Capture processes must be capable of operating over a wide range of transient events, malfunctions, and disturbances, as well as under uncertainties. As part of this work, dynamic simulation and control models, methods, and tools are being developed for CO{sub 2} capture and compression processes and their integration with a baseline commercial-scale supercritical pulverized coal (SCPC) power plant. Solid-sorbent-based post-combustion capture technology was chosen as the first industry challenge problem for CCSI because significant work remains to define and optimize the reactors and processes needed for successful sorbent capture systems. Sorbents offer an advantage because they can reduce the regeneration energy associated with CO{sub 2} capture, thus reducing the parasitic load. In view of this, the current paper focuses on development of a dynamic model of a solid-sorbent CO{sub 2} adsorber-reactor and an analysis of its transient performance with respect to several typical process disturbances. A one-dimensional, non-isothermal, pressure-driven dynamic model of a two-stage bubbling fluidized bed (BFB) adsorber-reactor is developed in Aspen Custom Modeler (ACM). The BFB stages are of overflow-type configuration where the solids leave the stage by flowing over the overflow-weir. Each bed is divided into three regions, namely emulsion, bubble, and cloud-wake regions. In all three regions, the model considers mass and energy balances. Along with the models of the BFB stages, models of other associated hardware are developed and integrated in a single flowsheet. A valid pressure-flow network is developed and a lower-level control system is designed so that the overall CO{sub 2} capture can be maintained at a desired level in face of the typical disturbances. The dynamic model is used for studying the transient responses of a number of important process variables as a result of the disturbances that are typical of post-combustion CO{sub 2} capture processes.

20 FOSSIL-FUELED POWER PLANTS↗

A dynamic model of stress and sustained attention

Arguments are presented that an integrated view of stress and performance must consider the task demanding a sustained attention as a primary source of cognitive stress. A dynamic model is developed on the basis of the concept of adaptability in both physiological and psychological terms, that addresses the effects of stress on vigilance and, potentially, a wide variety of attention-demanding performance tasks. The model provides an insight into the failure of an operator under the driving influences of stress and opens a number of potential avenues through which solutions to the complex challenge of stress and performance might be posed.

Hancock, P. A.↗

Kinetic-fluid dynamics modeling of I{sub 2} dissociation in supersonic chemical oxygen-iodine lasers

The mechanism of I{sub 2} dissociation in supersonic chemical oxygen-iodine lasers (COILs) is studied applying kinetic-fluid dynamics modeling, where pathways involving the excited species I{sub 2}(X {sup 1}SIGMA{sub g}{sup +},10<=v<25), I{sub 2}(X {sup 1}SIGMA{sub g}{sup +},25<=v<=47), I{sub 2}(A{sup '} {sup 3}PI{sub 2u}), I{sub 2}(A {sup 3}PI{sub 1u}), O{sub 2}(X {sup 3}SIGMA{sub g}{sup -},v), O{sub 2}(a {sup 1}DELTA{sub g},v), O{sub 2}(b {sup 1}SIGMA{sub g}{sup +},v), and I({sup 2}P{sub 1/2}) as intermediate reactants are included. The gist of the model is adding the first reactant and reducing the contribution of the second as compared to previous models. These changes, recently suggested by Azyazov, et al. [J. Chem. Phys. 130, 104306 (2009)], significantly improve the agreement with the measurements of the gain in a low pressure supersonic COIL for all I{sub 2} flow rates that have been tested in the experiments. In particular, the lack of agreement for high I{sub 2} flow rates, which was encountered in previous models, has been eliminated in the present model. It is suggested that future modeling of the COIL operation should take into account the proposed contribution of the above mentioned reactants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Modeling of Process Technologies for Closed-Loop Water Recovery Systems

Detailed chemical process simulations are a useful tool in designing and optimizing complex systems and architectures for human life support. Dynamic and steady-state models of these systems help contrast the interactions of various operating parameters and hardware designs, which become extremely useful in trade-study analyses. NASA s Exploration Life Support technology development project recently made use of such models to compliment a series of tests on different waste water distillation systems. This paper presents dynamic simulations of chemical process for primary processor technologies including: the Cascade Distillation System (CDS), the Vapor Compression Distillation (VCD) system, the Wiped-Film Rotating Disk (WFRD), and post-distillation water polishing processes such as the Volatiles Removal Assembly (VRA). These dynamic models were developed using the Aspen Custom Modeler (Registered TradeMark) and Aspen Plus(Registered TradeMark) process simulation tools. The results expand upon previous work for water recovery technology models and emphasize dynamic process modeling and results. The paper discusses system design, modeling details, and model results for each technology and presents some comparisons between the model results and available test data. Following these initial comparisons, some general conclusions and forward work are discussed.

Allada, Rama Kumar↗

Dynamic modeling of structures from measured complex modes

A technique is presented to use a set of identified complex modes together with an analytical mathematical model of a structure under test to compute improved mass, stiffness and damping matrices. A set of identified normal modes, computed from the measured complex modes, is used in the mass orthogonality equation to compute an improved mass matrix. This eliminates possible errors that may result from using approximated complex modes as normal modes. The improved mass matrix, the measured complex modes and the higher analytical modes are then used to compute the improved stiffness and damping matrices. The number of degrees-of-freedom of the improved model is limited to equal the number of elements in the measured modal vectors. A simulated experiment shows considerable improvements, in the system's analytical dynamic model, over the frequency range of the given measured modal information.

Ibrahim, s. R.↗

Dynamic Modeling of Structures from Measured Complex Modes

A technique is presented to use a set of identified complex modes together with an analytical mathematical model of a structure under test to compute improved mass, stiffness and damping matrices. A set of identified normal modes, computed from the measured complex modes, is used in the mass orthogonality equation to compute an improved mass matrix. This eliminates possible errors that may result from using approximated complex modes as normal modes. The improved mass matrix, the measured complex modes and the higher analytical modes are then used to compute the improved stiffness and damping matrices. The number of degrees-of-freedom of the improved model is limited to equal the number of elements in the measured modal vectors. A simulated experiment shows considerable improvements, in the system's analytical dynamic model, over the frequency range of the given measured modal information.

Ibrahim, S. R.↗

NEW LIMITS ON AN INTERMEDIATE-MASS BLACK HOLE IN OMEGA CENTAURI. II. DYNAMICAL MODELS

We present a detailed dynamical analysis of the projected density and kinematical data available for the globular cluster omega Centauri. We solve the spherical anisotropic Jeans equation for a given density profile to predict the projected profiles of the rms velocity sigma-bar(R), in each of the three orthogonal coordinate directions (line of sight, proper motion radial, and proper motion tangential). The models allow for the presence of a central dark mass, such as a possible intermediate-mass black hole (IMBH). We fit the models to new Hubble Space Telescope star count and proper motion data near the cluster center presented in the companion paper, which is Paper I in this series, combined with existing ground-based measurements at larger radii. The projected density profile is consistent with being flat near the center, with an upper limit gamma {approx}< 0.07 on the central logarithmic slope. The rms proper motion profile is also consistent with being flat near the center. The velocity anisotropy profile, distance, and stellar mass-to-light ratio are all tightly constrained by the data and found to be in good agreement with previous determinations by van de Ven et al. To fit the kinematics, we consider anisotropic models with either a flat core (gamma = 0) or a shallow cusp (gamma = 0.05). Core models provide a good fit to the data with M{sub BH} = 0; cusp models require a dark mass. If the dark mass in cusp models is an IMBH, then M{sub BH} = (8.7 +- 2.9) x 10{sup 3} M{sub sun}; if it is a dark cluster, then its extent must be {approx}<0.16 pc. Isotropic models do not fit the observed proper motion anisotropy and yield spuriously high values for any central dark mass. These models do provide a good fit to the Gauss-Hermite moments of the observed proper motion distributions (h{sub 4} = -0.023 +- 0.004, h{sub 6} = 0.001 +- 0.004). There are no unusually fast-moving stars observed in the wings of the proper motion distribution, but we show that this does not strongly constrain the mass of any possible IMBH. The overall end result of the modeling is an upper limit to the mass of any possible IMBH in omega Centauri: M{sub BH} {approx}< 1.2 x 10{sup 4} M{sub sun} at {approx}1sigma confidence (or {approx}<1.8 x 10{sup 4} M{sub sun} at {approx}3sigma confidence). The 1sigma limit corresponds to M{sub BH}/M{sub tot} {approx}< 0.43%. We combine this with results for other clusters and discuss the implications for globular cluster IMBH demographics. Tighter limits will be needed to rule out or establish whether globular clusters follow the same black hole demographics correlations as galaxies. The arguments put forward by Noyola et al. to suspect an IMBH in omega Centauri are not confirmed by our study; the value of M{sub BH} they suggested is firmly ruled out.

79 ASTRONOMY AND ASTROPHYSICS↗

Development of a two-dimensional zonally averaged statistical-dynamical model. II - The role of eddy momentum fluxes in the general circulation and their parameterization

The role of eddy momentum fluxes in the general circulation was investigated using a two-dimensional zonally averaged statistical-dynamical model described by Yao and Stone (1987), which is almost two orders of magnitude faster than the three-dimensional climate model of Hansen et al. (1983). Results show that the vertical structure of the meridional eddy flux has relatively little impact on the general circulation, presumably because the vertical structure is strongly constrained by the thermal wind relation and surface friction. On the other hand, it was found that, in order to simulate accurately the general circulation and its response to climate changes, parameterization of the vertically integrated meridional eddy flux of angular momentum is necessary. A new parameterization of this eddy momentum transport was carried out, which is intended to represent the transport due to large-scale transient eddies arising from baroclinic instability.

Stone, Peter H.↗

Correlation of the Trim Limits of Stability Obtained for a PB2Y-3 Flying Boat and a 1/8-Size Powered Dynamic Model

Tests of a PB2Y-3 flying boat were made at the U.S> Naval Air Station, Patuxent River, Md., to determine its hydrodynamic trim limits of stability. Corresponding tests were also made of a 1/8-size powered dynamic model of the same flying boat in Langley tank no. 1. During the tank tests, the full-size testing procedure was reproduced as closely as possible in order to obtain data for a direct correlation of the results. As a nominal gross load of 66,000 pounds, the lower trim limits of the full-size and model were in good agreement above a speed of 80 feet per second. As the speed decreased below 80 feet per second, the difference between the model trim limits and full-scale trim limits gradually became larger. The upper trim limit of the model with flaps deflected 0 deg was higher than that of the full-size, but the difference was small over the speed range compared. At flap deflections greater than 0 deg, it was not possible to trim either the model of the airplane to the upper limit with the center of gravity at 28 percent of the mean aerodynamic chord. The decrease in the lower trim limits with increase in flap deflection showed good agreement for the airplane and model. The lower trim limits obtained at different gross loads for the full-size airplane were reduced to approximately a single curve by plotting trim against the square root of C(sub delta (sub o)) divided by C(sub V).

Garrison, Charlie C.↗

Spatially dependent cluster dynamics model of He plasma surface interaction in tungsten for fusion relevant conditions

In fusion reactors, plasma facing components (PFC) and, in particular, the divertor will be irradiated with high fluxes of low-energy (similar to 100 eV) helium and hydrogen ions. Tungsten is one of the leading candidate divertor materials for ITER and DEMO fusion reactors. However, the behaviour of tungsten under high dose, coupled helium/hydrogen exposure remains to be fully understood. The PFC response and performance changes are intimately related to microstructural changes, such as the formation of point defect clusters, helium and hydrogen bubbles or dislocation loops. Computational materials' modelling results are described here that investigate the mechanisms controlling microstructural evolution in tungsten. The aim of this study is to understand and predict sub-surface helium bubble growth under high flux helium ion implantation (similar to 10 22 m -2 s -1 ) at high temperatures (>1000 K). Here, we report results from a spatially dependent cluster dynamics model based on reaction-diffusion rate theory to describe the evolution of the microstructure under these conditions. The key input parameters to the model (diffusion coefficients, migration and binding energies, initial defect production) are determined from a combination of atomistic modelling and available experimental data. The results are in good agreement with results of an analytical model that is presented in a separate paper. In particular, it is found that the sub-surface evolution with respect to bubble size and concentration of the helium bubbles strongly depends on the flux and temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamic Model Investigation of the Rough-Water Landing Characteristics of a Spacecraft

The investigation was made to study the rough-water landing characteristics of a Gemini type of spacecraft. The investigations were made with a 1/6-scale dynamic model in a simulated sea state 4 rough water. Parachute letdown landings were simulated with the model at various yaw angles and horizontal velocities. The vertical velocity and landing attitude remained constant. The range of maximum lateral and longitudinal acceleration was from about 3-1/2g to 16g while that for the maximum normal acceleration was from lg to 15g. The range of maximum angular acceleration was from about 0 to 190 radians per second(exp 2). The smoothest behavior and the lowest angular acceleration occurred at the 90 degree yaw angle. The normal acceleration was near minimum at this condition.

[Division] Imp. Str↗