Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic structure factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Structural Design and Aeromechanical Analysis of Unconventional Blades for Future Mars Rotorcraft

The structural design for rotor blades with thin, unconventional airfoils for Earth-based testing is obtained using three-Dimensional (3D) aeromechanical analysis in support of the NASA ROAMX project. The outer mold line was provided by NASA, but the internal structural design was developed at the University of Maryland and is presented here along with a thorough aeromechanical analysis. The main objectives are to verify the structural integrity of the design and understand the unique aeroelastic behavior of the non-conventional airfoils designed for low-Reynolds number and high subsonic Mach number. Four different blade models are considered, with the pitch axis varied from quarter-chord to mid-chord to determine the effect of C.G. offset on natural frequencies, blade deformations, root loads, and 3D stresses. First, torsional stability is calculated for each of the designs – especially important due to the low Lock number on Mars. All four blade designs are studied under rotation in vacuum, and significant reductions in root loads and 3D stresses are achieved by moving the pitch axis closer to mid-chord to reduce the C.G. offset. Based on the vacuum analysis, the blade design with the pitch axis at 40% chord is selected for aeromechanical analysis. The blade control load, airloads, deformations, and 3D stresses are studied for steady hover. Dynamic control load and dynamic 3D stresses are studied for unsteady hover achieved using cyclic. Significant elastic twist is observed due to the trapeze effect and propeller moment, affecting the spanwise distribution of aerodynamic loads on the blades. The dynamic control load is found to increase significantly due to inertial coupling from the C.G. offset. The dynamic stresses also increase, although still have factors of safety greater than two for both tensile and compressive stress.

Structural Design↗
DOE OSTI2025

Dynamically Chiral Expanded Helicenes

Expanded helicenes are a class of chiral nanographenes with a screw-shaped skeleton and a larger diameter than their classical ortho-fused counterparts. The flexibility of this internal cavity results in helicenes that are often difficult to isolate as single enantiomers. Expanded helicenes are therefore an intriguing target for exploration of dynamic chirality, a phenomenon resulting from introduction of chiral auxiliaries to control structure in a racemic system. This contribution describes installation of chiral amine substituents into the cavity of a diformyl expanded [11]-helicene by mild, efficient, and reversible imine condensations. The resulting helicenes display strong molar circular dichroism up to |Δε| = 300 M -1 cm -1 and absorption dissymmetry factors of |g abs | = 0.010. The magnitude of circular dichroism can be varied by using different chiral amine substituents, which is correlated to the diastereomeric ratios of the helicenes. In conclusion, this is the first instance of dynamic chirality being used to observe a chiroptic response in expanded helicenes and is a significant synthetic improvement over methods which require conventional enantiomer resolution.

Rothenberger, August J. [University of California,↗
NASA NTRSDate not supplied

Structural Design and Aeromechanical Analysis of Unconventional Blades for Future Mars Rotorcraft

The structural design for rotor blades with thin, unconventional airfoils for Earth-based testing is obtained using three-Dimensional (3D) aeromechanical analysis. This analysis is in support of the NASA ROAMX project. The outer mold was provided by NASA, but the internal structural design was developed at the University of Maryland and is presented here, along with a thorough aeromechanical analysis. The main objectives are to verify the structural integrity of the design and understand the unique aeroelastic behavior of the non-conventional airfoils designed for low-Reynolds number and high-Mach number flow. Six different blade models are considered, with the pitch axis varied from quarter-chord to mid-chord to determine the effect of C.G. offset on natural frequencies, blade deformations, root loads, and 3D stresses. All six blade designs are first studied under rotation in pure vacuum, and significant reductions in root loads and 3D stresses are achieved by moving the pitch axis closer to mid-chord to reduce the C.G. offset. Based on the vacuum analysis, the blade design with the pitch axis at 40% chord is selected for aerodynamic analysis. The blade control load, airloads, deformations, and 3D stresses are studied for steady hover. Dynamic control load and dynamic 3D stresses are studied for unsteady hover achieved using cyclic. Significant elastic twist is observed due to the trapeze effect and propeller moment, affecting the spanwise distribution of aerodynamic loads on the blades. However, the effect of aerodynamic loads on 3D stresses and the blade control load is found to be minimum. The dynamic control load is found to increase significantly due to inertial coupling from the C.G. offset. The dynamic stresses also increase, although still have factors of safety greater than two for both tensile and compressive stress.

Structural Design↗
NASA NTRS1983

Structural considerations for a software life cycle dynamic simulation model

This paper presents the results of a preliminary study into the prospects for simulating the software implementation and maintenance life cycle process, with the aim of producing a computerized tool for use by management and software engineering personnel in project planning, tradeoff studies involving product, environmental, situational, and technological factors, and training. The approach taken is the modular application of a 'flow of resource' concept to the systems dynamics simulation modeling technique. The software life cycle process is represented as a number of stochastic, time-varying, interacting work tasks that each achieves one of the project milestones. Each task is characterized by the item produced, the personnel applied, and the budgetary profile.

Tausworthe, R. C.↗
DOE OSTI2025

Characterization of wind conditions and impact on wind loading at an operational parabolic trough concentrating solar power plant using LiDAR observations

Wind loading is a major factor influencing the structural design costs of Concentrating Solar Power (CSP) collector systems, including heliostats and parabolic troughs. Traditionally, these designs have been based on wind-tunnel data, which often fail to accurately represent the dynamic effects experienced at full scale. This study presents a first-of-its-kind experimental characterization of wind conditions within an operational parabolic-trough CSP power plant focusing specifically on using lidar observations. The lidar observations give a unique opportunity to provide insights into wind flow conditions deep within the trough arrays. Our results suggest that (1) after being blocked by the first few rows, the wind speed above the troughs recovers to 73% of its inflow magnitude as it flows further over the trough field due to enhanced turbulent mixing and (2) due to the wind speed recovery, troughs in the interior field will likely experience higher shear-induced turning moments compared those at the front. The conclusions from this work stress the importance of better understanding the wind patterns and interior wind loads when designing solar collectors and highlights the need for more interior load measurements in the future field campaigns.

17 WIND ENERGY↗
DOE OSTI2021

Interfacial and Confinement-Mediated Organization of Gas Hydrates, Water, Organic Fluids, and Nanoparticles for the Utilization of Subsurface Energy and Geological Resources

Harnessing the subsurface geologic environments in an efficient and environmentally sustainable manner is challenged by uncertainties associated with predicting the fate of fluids and sustaining porosity and permeability in subsurface geologic environments. Some of these uncertainties arise from confined and interfacially induced structures of fluids in subsurface geologic environments. The formation of gas hydrates, phase transitions of confined fluids, assembly and deposition of heavy hydrocarbons, and the agglomeration and fate of nanoparticles in confined environments are summarized in this review. Nanoscale confinement contributes to anisotropic structures and dynamics of fluids, which is the basis for anomalous phase transition thermodynamics, reactivity, transport, and geomechanical behavior. In this review, we discuss the structures of confined fluids and deviation in observed properties from bulk fluids. The factors influencing the structures of confined fluids can be generally divided into two groups: (a) pore characteristics including pore size, pore surface chemistry, and pore geometry and (b) confined fluid/solid characteristics such as molecular structure, concentrations, charges, pore filling, and presence of additives. Scientific advancements and knowledge gaps in our understanding of the structures of confined fluids and the associated differences in observed properties compared to bulk fluids are discussed. Here, the phenomena discussed in this review are of particular relevance to our efforts in harnessing the subsurface environments for a low carbon future by increasing the utilization of geothermal energy, using CO 2 as a working fluid, and storing CO 2 in subsurface geologic environments.

42 ENGINEERING↗
DOE OSTI2020

Determination of latent dimensionality in international trade flow

Currently, high-dimensional data is ubiquitous in data science, which necessitates the development of techniques to decompose and interpret such multidimensional (aka tensor) datasets. Finding a low dimensional representation of the data, that is, its inherent structure, is one of the approaches that can serve to understand the dynamics of low dimensional latent features hidden in the data. Moreover, decomposition methods with non-negative constraints are shown to extract more insightful factors. Nonnegative RESCAL is one such technique, particularly well suited to analyze self-relational data, such as dynamic networks found in international trade flows. Particularly, non-negative RESCAL computes a low dimensional tensor representation by finding the latent space containing multiple modalities. Furthermore, estimating the dimensionality of this latent space is crucial for extracting meaningful latent features. Here, to determine the dimensionality of the latent space with non-negative RESCAL, we propose a latent dimension determination method which is based on clustering of the solutions of multiple realizations of non-negative RESCAL decompositions. We demonstrate the performance of our model selection method on synthetic data. We then apply our method to decompose a network of international trade flows data from International Monetary Fund and shows that with a correct latent dimension determination, the resulting features are able to capture relevant empirical facts from economic literature.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Physical, resource supply, and biological controls on nutrient processing along the river continuum

Nutrient impairment has led to damages to US surface and groundwater systems in excess of 100 billion dollars per year. Therefore, there is a strong need to develop methods to predict the transport, uptake, and export of nutrients along fluvial networks. We present results that are based on a data-driven mechanistic understanding of three factors that largely control nutrient uptake and export: 1) interactions between transport-related processes (mass transfer to metabolically active zones), 2) resource supply dynamics (nutrient concentration, stoichiometric constraints, etc.), and 3) biological controls (microbial community structure and function). Our results were generated from column experiments conducted along the Jemez River-Rio Grande continuum, which spans four orders of magnitude in mean annual discharge, more than 2000 m in altitude, and more than 500 km of stream longitude. Two resource supply injections were performed on each of the columns, i.e., a nitrate only addition, followed by a stoichiometrically ‘balanced’ 106Carbon:16Nitrogen:1Phosphorus addition. We quantified NO3-N uptake kinetics while constraining three variables: stream order, sediment type and type of injection (N vs stoichiometrically ‘balanced’ C:N:P). Following the laboratory nutrient uptake experiments, the columns were destructively sampled and the contents were homogenized to collect subsamples for DNA sequencing. Amplicon analysis was carried out as described by the Earth Microbiome Protocol for 16s and ITS sequencing.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2002

Probabilistic Study of Fluid Structure Interaction

A combustor liner was computationally simulated and probabilistically evaluated in view of the several uncertainties in the aerodynamic, structural, material and thermal variables that govern the combustor liner. The interconnection between the computational fluid dynamics code and the finite element structural analysis codes was necessary to couple the thermal profiles with structural design. The stresses and their variations were evaluated at critical points on the liner. Cumulative distribution functions and sensitivity factors were computed for stress responses due to the aerodynamic, mechanical and thermal random variables. It was observed that the inlet and exit temperatures have a lot of influence on the hoop stress. For prescribed values of inlet and exit temperatures, the Reynolds number of the flow, coefficient of thermal expansion, gas emissivity and absorptivity and thermal conductivity of the material have about the same impact on the hoop stress. These results can be used to quickly identify the most critical design variables in order to optimize the design and make it cost effective.

Gorla, Rama S. R.↗
NASA NTRS1998

Current Grid Generation Strategies and Future Requirements in Hypersonic Vehicle Design, Analysis and Testing

Recent advances in computational power enable computational fluid dynamic modeling of increasingly complex configurations. A review of grid generation methodologies implemented in support of the computational work performed for the X-38 and X-33 are presented. In strategizing topological constructs and blocking structures factors considered are the geometric configuration, optimal grid size, numerical algorithms, accuracy requirements, physics of the problem at hand, computational expense, and the available computer hardware. Also addressed are grid refinement strategies, the effects of wall spacing, and convergence. The significance of grid is demonstrated through a comparison of computational and experimental results of the aeroheating environment experienced by the X-38 vehicle. Special topics on grid generation strategies are also addressed to model control surface deflections, and material mapping.

Papadopoulos, Periklis↗
NASA NTRS2007

Astronaut Risk Levels During Crew Module (CM) Land Landing

The NASA Engineering Safety Center (NESC) is investigating the merits of water and land landings for the crew exploration vehicle (CEV). The merits of these two options are being studied in terms of cost and risk to the astronauts, vehicle, support personnel, and general public. The objective of the present work is to determine the astronaut dynamic response index (DRI), which measures injury risks. Risks are determined for a range of vertical and horizontal landing velocities. A structural model of the crew module (CM) is developed and computational simulations are performed using a transient dynamic simulation analysis code (LS-DYNA) to determine acceleration profiles. Landing acceleration profiles are input in a human factors model that determines astronaut risk levels. Details of the modeling approach, the resulting accelerations, and astronaut risk levels are provided.

Lawrence, Charles↗
NASA NTRSDate not supplied

Global Landslide Hazard Assessment for Situational Awareness (LHASA) Version 2: New Activities and Future Plans

A remote sensing-based system has been developed to characterize the potential for rainfall-triggered landslides across the globe in near real-time. The Landslide Hazard Assessment for Situational Awareness (LHASA) model uses a decision tree framework to combine a static susceptibility map derived from information on slope, rock characteristics, forest loss, distance to fault zones and distance to road networks with satellite precipitation estimates from the Global Precipitation Measurement (GPM) mission. Since 2016, the LHASA model has been providing near real-time and retrospective estimates of potential landslide activity. Results of this work are available at https://landslides.nasa.gov. In order to advance LHASA’s capabilities to characterize landslide hazards and impacts dynamically, we have implemented a new approach that leverages machine learning, new parameters, and new inventories. LHASA 2.0 uses the XGBoost machine learning model to bring in dynamic variables as well as additional static variables to better represent landslide hazard globally. Global rainfall forecasts are also being evaluated to provide a 1-3 day forecast of potential landslide activity. Additional factors such as recent seismicity and burned areas are also being considered to represent the preconditioning or changing interactions with subsequent rainfall over affected areas. A series of parameters are being tested within this structure using NASA’s Global Landslide Catalog as well as many other event-based and multi-temporal inventories mapped by the project team or provided by project partners. In addition to estimates of landslide hazard, LHASA Version 2 will incorporate dynamic estimates of exposure including population, roads and infrastructure to highlight the potential impacts that rainfall-triggered landslides. The ultimate goal of LHASA Version 2.0 is to approximate the relative probabilities of landslide hazard and exposure across different space and time scales to inform hazard assessment retrospectively over the past 20 years, in near real-time, and in the future. In addition to the hazard. This presentation will outline the new activities for LHASA Version 2.0 and present some next steps for this system.

Dalia Kirschbaum↗
DOE OSTI2024

Forest structural complexity and ignition pattern influence simulated prescribed fire effects

Background: Forest structural characteristics, the burning environment, and the choice of ignition pattern each influence prescribed fire behaviors and resulting fire effects; however, few studies examine the influences and interactions of these factors. Understanding how interactions among these drivers can influence prescribed fire behavior and effects is crucial for executing prescribed fires that can safely and effectively meet management objectives. To analyze the interactions between the fuels complex and ignition patterns, we used FIRETEC, a three-dimensional computational fluid dynamics fire behavior model, to simulate fire behavior and effects across a range of horizontal and vertical forest structural complexities. For each forest structure, we then simulated three different prescribed fires each with a unique ignition pattern: strip-head, dot, and alternating dot. Results: Forest structural complexity and ignition pattern affected the proportions of simulated crown scorch, consumption, and damage for prescribed fires in a dry, fire-prone ecosystem. Prescribed fires in forests with complex canopy structures resulted in increased crown consumption, scorch, and damage compared to less spatially complex forests. The choice of using a strip-head ignition pattern over either a dot or alternating-dot pattern increased the degree of crown foliage scorched and damaged, though did not affect the proportion of crown consumed. We found no evidence of an interaction between forest structural complexity and ignition pattern on canopy fuel consumption, scorch, or damage. Conclusions: We found that forest structure and ignition pattern, two powerful drivers of fire behavior that forest managers can readily account for or even manipulate, can be leveraged to influence fire behavior and the resultant fire effects of prescribed fire. These simulation findings have critical implications for how managers can plan and perform forest thinning and prescribed burn treatments to meet risk management or ecological objectives.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2011

Multiple-Event, Single-Photon Counting Imaging Sensor

The single-photon counting imaging sensor is typically an array of silicon Geiger-mode avalanche photodiodes that are monolithically integrated with CMOS (complementary metal oxide semiconductor) readout, signal processing, and addressing circuits located in each pixel and the peripheral area of the chip. The major problem is its single-event method for photon count number registration. A single-event single-photon counting imaging array only allows registration of up to one photon count in each of its pixels during a frame time, i.e., the interval between two successive pixel reset operations. Since the frame time can t be too short, this will lead to very low dynamic range and make the sensor merely useful for very low flux environments. The second problem of the prior technique is a limited fill factor resulting from consumption of chip area by the monolithically integrated CMOS readout in pixels. The resulting low photon collection efficiency will substantially ruin any benefit gained from the very sensitive single-photon counting detection. The single-photon counting imaging sensor developed in this work has a novel multiple-event architecture, which allows each of its pixels to register as more than one million (or more) photon-counting events during a frame time. Because of a consequently boosted dynamic range, the imaging array of the invention is capable of performing single-photon counting under ultra-low light through high-flux environments. On the other hand, since the multiple-event architecture is implemented in a hybrid structure, back-illumination and close-to-unity fill factor can be realized, and maximized quantum efficiency can also be achieved in the detector array.

Zheng, Xinyu↗
DOE OSTI2021

Exacerbated drought impacts on global ecosystems due to structural overshoot

Vegetation dynamics are affected not only by the concurrent climate but also by memory-induced lagged responses. For example, favourable climate in the past could stimulate vegetation growth to surpass the ecosystem carrying capacity, leaving an ecosystem vulnerable to climate stresses. This phenomenon, known as structural overshoot, could potentially contribute to worldwide drought stress and forest mortality but the magnitude of the impact is poorly known due to the dynamic nature of overshoot and complex influencing timescales. Here, we use a dynamic statistical learning approach to identify and characterize ecosystem structural overshoot globally and quantify the associated drought impacts. We find that structural overshoot contributed to around 11% of drought events during 1981-2015 and is often associated with compound extreme drought and heat, causing faster vegetation declines and greater drought impacts compared to non-overshoot related droughts. The fraction of droughts related to overshoot is strongly related to mean annual temperature, with biodiversity, aridity and land cover as secondary factors. These results highlight the large role vegetation dynamics play in drought development and suggest that soil water depletion due to warming-induced future increases in vegetation could cause more frequent and stronger overshoot droughts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Insight into the autoproteolysis mechanism of the RsgI9 anti‐σ factor from Clostridium thermocellum

Abstract Clostridium thermocellum is a potential microbial platform to convert abundant plant biomass to biofuels and other renewable chemicals. It efficiently degrades lignocellulosic biomass using a surface displayed cellulosome, a megadalton sized multienzyme containing complex. The enzymatic composition and architecture of the cellulosome is controlled by several transmembrane biomass‐sensing RsgI‐type anti‐σ factors. Recent studies suggest that these factors transduce signals from the cell surface via a conserved RsgI extracellular (CRE) domain (also called a periplasmic domain) that undergoes autoproteolysis through an incompletely understood mechanism. Here we report the structure of the autoproteolyzed CRE domain from the C. thermocellum RsgI9 anti‐σ factor, revealing that the cleaved fragments forming this domain associate to form a stable α/β/α sandwich fold. Based on AlphaFold2 modeling, molecular dynamics simulations, and tandem mass spectrometry, we propose that a conserved Asn‐Pro bond in RsgI9 autoproteolyzes via a succinimide intermediate whose formation is promoted by a conserved hydrogen bond network holding the scissile peptide bond in a strained conformation. As other RsgI anti‐σ factors share sequence homology to RsgI9, they likely autoproteolyze through a similar mechanism.

Takayesu, Allen↗
DOE OSTI2021

A structured RNA motif locks Argonaute2:miR-122 onto the 5’ end of the HCV genome

microRNAs (miRNAs) form regulatory networks in metazoans. Viruses engage miRNA networks in numerous ways, with Flaviviridae members exploiting direct interactions of their RNA genomes with host miRNAs. For hepatitis C virus (HCV), binding of liver-abundant miR-122 stabilizes the viral RNA and regulates viral translation. Here, we investigate the structural basis for these activities, taking into consideration that miRNAs function in complex with Argonaute (Ago) proteins. The crystal structure of the Ago2:miR-122:HCV complex reveals a structured RNA motif that traps Ago2 on the viral RNA, masking its 5’ end from enzymatic attack. The trapped Ago2 can recruit host factor PCBP2, implicated in viral translation, while binding of a second Ago2:miR-122 competes with PCBP2, creating a potential molecular switch for translational control. Combined results reveal a viral RNA structure that modulates Ago2:miR-122 dynamics and repurposes host proteins to generate a functional analog of the mRNA cap-binding complex.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1973

Analysis of propellant feedline dynamics

An analytical model and corresponding computer program for studying disturbances of liquid propellants in typical engine feedline systems were developed. The model includes the effects of steady turbulent mean flow, the influence of distributed compliances, the effects of local compliances, and various factors causing structural-hydraulic coupling. The computer program was set up such that the amplitude and phase of the terminal pressure/input excitation is calculated over any desired frequency range for an arbitrary assembly of various feedline components. A user's manual is included.

Holster, J. L.↗