Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “drying methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

ADVANCED TECHNIQUES FOR ENERGY INPUT REDUCTION IN GYPSUM WALLBOARD DRYING

Gypsum has been used for thousands of years in building and construction applications, starting with the pyramids in ancient Egypt, to “Plaster of Paris” in the midcenturies, and to the now-ubiquitous drywall in modern-day houses. Production of gypsum drywall boards takes several steps with high energy and water consumption. The current state of the art in industry is a process that begins by mining gypsum and reducing its particle size by milling. These gypsum particles undergo calcination to convert the gypsum (calcium sulfate dihydrate) into stucco (calcium sulfate hemihydrate). The stucco is mixed with additives and enough water to form a slurry that can be poured onto a conveyor belt and molded into the desired geometry. The stucco reacts with the water, converting back into gypsum. The remaining water is then dried from the board to form the final product. While only ~20 wt. % of water is needed for the conversion of stucco to gypsum, significant excess water is needed to ensure sufficient fluidity of the slurry for processibility. This is due to the low quality of the stucco particles produced in high throughput calcination units, which disintegrate upon mixing with water, thereby reducing the fluidity and processability of the slurry. This project aims to produce high-quality stucco particles by dielectric calcination. In doing so, particle integrity can be maintained through the slurry formulation step, and particle size distribution of the stucco can be adjusted to increase fluidity with less excess water. With less water remaining unreacted in the board, significant energy can be saved in drying the product. The project aims to 1) develop a dielectric calcination method to TRL 3, 2) determine optimal and practical particle size distributions to minimize excess water in the slurry, and 3) reduce the energy consumption of the drying process.

Conforti, Kameron↗

Optimizing Transmission of Acoustic Signals to Monitor Internal Conditions of Canisters for Dry Storage of Commercial Spent Nuclear Fuel

Safe storage of spent nuclear fuel (SNF) is critical to the nuclear fuel cycle and the future of nuclear energy. In the United States, SNF is stored primarily via two methods regulated by the U.S. Nuclear Regulatory Commission: wet storage in SNF pools and dry storage in dry cask storage systems (DCSSs). After about five years of cooling in spent fuel pools, the fuel assemblies are transferred into DCSSs, and the systems are filled with helium and sealed by welding. Deterioration of conditions inside of a DCSS is reflected in changes in the internal gas properties; this motivates the development of acoustic techniques to monitor internal gas properties, over extended storage periods, using sensors mounted on the exterior of the storage packages. However, a major challenge in collecting acoustic signals is the impedance mismatch between the steel canister shell and the gas. Only a small fraction of the ultrasonic signal can be transmitted through the gas medium. This paper documents experimental studies conducted on a full-scale canister mock-up to capture the gas-borne signals. Damping materials were pasted on the outside, and blocking and unblocking tests were conducted to identify the gas-borne signal. The results show that the excitation frequency plays an important role in maximizing the gas-borne signals. The gas-borne signal was successfully detected at around the theoretical time-of-flight. A high signal-to-noise ratio was achieved in the measurements. Next, the acoustic impedance matching layers were introduced, and the gas signal was drastically improved compared with that using no AIM layers.

Spent nuclear fuel (SNF), Canisters, Internal cond↗

Isoconversional Kinetic Analysis of Oxygen Desorption for Sr 0.75 Ca 0.25 FeO 3-δ Perovskite in Dry and Steam-Based Environments

The desorption kinetics of Sr 0.75 Ca 0.25 FeO 3-δ perovskite material are examined in both dry and steam-based environments using redox gaseous products of a laboratory-scale fixed bed. First, desorption kinetics associated with the dry environment are proposed based on Friedman’s isoconversional method. It is found from the reconstructed reaction model that the desorption kinetics of this perovskite are controlled by a three-step mechanism, where hypothetically, the phase-boundary reaction rapidly prevails first, followed by diffusion and/or nucleation, and finally, unimolecular decay or random nucleation-controlled reaction. Subsequent analyses of the Arrhenius parameters indicated that both the early and later desorption stages, respectively, controlled by the phase boundary and unimolecular/random nucleation reactions, are associated with low energetic demand. In contrast, a high energetic penalty is required for the diffusion/nucleation reaction. Further, a satisfactory a priori verification of the proposed kinetics suggested that the three-step reaction mechanism reasonably describes the desorption of this perovskite in a dry environment. With the presence of steam in the desorption environment, oxygen production is substantially inhibited, but the hypothetical three-step mechanism is still found to control the desorption. Meanwhile, the primary effects of the steam on these mechanisms include the widening of the conversion extent associated with the diffusion/nucleation reaction, along with a higher energetic demand compared to the dry environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Contact Drying of Printed Sinterable-Silver Paste

We report that drying of stencil-, screen-, or dispense-printed paste is a crucial, yet taken-for-granted, presintering step for sinterable-silver (SS) interconnect processing and ultimately its reliability. If the paste’s solvent is not sufficiently removed during drying, then entrapped gas can result, and that leads to the formation of thermal-, strength-, and reliability-limiting defects in the later-sintered interconnect layer. Presently advocated drying strategies for wet silver paste cause either a limit of associated size or area or require pressure assistance during subsequent sintering. Alternatively, open-face contact drying (OContDry) from contact heating or conductive heating (a method used in industrial processes) offers the potential to overcome those limitations with SS paste. However, satisfactory strength of its final sintered structure must be proven prior to any potential adoption. In this paper, the achievement of a combination of relatively large shear failure stress with low scatter for OContDry SS was demonstrated. Lastly, this is significant because OContDry enables greater processing versatility with SS interconnects and several other advantages too.

36 MATERIALS SCIENCE↗

THE USE OF DI WATER TO MITIGATE DUSTING FOR ADDITION OF DWPF FRIT TO THE SLURRY MIX EVAPORATOR

The Defense Waste Processing Facility (DPWF) presently is in the process to determine means to reduce water utilization in the Slurry Mix Evaporator (SME) process, thus reducing effluent and processing times. The frit slurry addition system mixes the dry frit with water, yielding approximately a 50 weight percent slurry containing frit and the other fraction water. This slurry is discharged into the SME and excess water is removed via boiling. To reduce this water load to the SME, DWPF has proposed using a pneumatic system in conveying the frit to the SME, in essence a dry delivery system. The problem associated with utilizing a dry delivery system with the existing frit is the generation of dust when discharged into the SME. The use of water has been shown to be effective in the mining industry as well in the DOE complex to mitigate dusting. The method employed by SRNL to determine the quantity of water to mitigate dusting in dry powders was effective, between a lab and bench scale tests. In those tests, it was shown that as high as five weight percent (wt%) of water addition was required to mitigate dust from batches of glass forming minerals used by the Waste Treatment Plant at Hanford, Washington. The same method used to determine the quantity of water to mitigate dusting was used in this task to determine the quantity of water to mitigate this dusting using as-received frit. The ability for water to mitigate dusting is due to its adhesive properties as shown in Figure 1-1. Wetting the frit particles allows for the smaller frit particles (including dust) to adhere to the larger frit particles or to agglomerate into large particles. Fluids other than water can also be used, but their adhesive properties are different than water and the quantity required to mitigate dusting is different, as was observed in reference 1. Excessive water, a few weight percentages greater than that required to mitigate dusting can cause the resulting material not to flow. The primary objective of this task is to perform bench scale testing on various frits that have been used at DWPF or in test programs at SRNL to determine the quantity of de-ionized (DI) water required to mitigate dusting per mass basis of frit. The quantity of DI water required was determined visually by observing the effluent port of the mixer, and DI water addition was made to the point where no visible dust was observed leaving the effluent port. A total of eight different frits were selected for testing. Secondary objectives in this task include the following: (1) Video taping of the de-dusting procedure, (2) Particle size distribution analyses of the dry and wetted frits at the weight fraction of water required for de-dusting, (3) Plate flow tests to determine angle of flow and quantity of material remaining on plate at 90 degrees, (4) Microscopy of dry and wetted frit, and (5) Effect of excess water for selected frits on plate flow. The above analyses were performed within one hour of water addition, to minimize the effect of evaporative water losses. To better understand the size of dust particles, perform settling tests on selected frits and capture the fines. Analyze the fines for particle size distribution. Finally, it is expected that the surface area of frit is an important parameter in the quantity of water required for dust mitigation. An analysis of particle size distribution (PSD) data of as-received frit analyzed by SRNL over the past two to three years will be performed to determine the variation in the distribution of as-received frit. The following objectives were stated in the Technical Task Request4 as objectives that given adequate time would provide insight in helping DWPF in assessing equipment or processes for de-dusting and processing of dry frit. Due to time constraints, commercial methods for dedusting are provided. These results are detailed in section 3.7. Obtain design information from Hanford with respective to equipment used for dedusting. Suggestions on enhanced design features, such as flush water, pipe air purges, humidified compressed air, options for agitation, and other base (SRNL) knowledge.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Large scale synthesis of nanostructured zirconia-based compounds from freeze-dried precursors

Nanocrystalline zirconia powders have been obtained at the multigram scale by thermal decomposition of precursors resulting from the freeze-drying of aqueous acetic solutions. This technique has equally made possible to synthesize a variety of nanostructured yttria or scandia doped zirconia compositions. SEM images, as well as the analysis of the XRD patterns, show the nanoparticulated character of those solids obtained at low temperature, with typical particle size in the 10-15 nm range when prepared at 673 K. The presence of the monoclinic, the tetragonal or both phases depends on the temperature of the thermal treatment, the doping concentration and the nature of the dopant. In addition, Rietveld refinement of the XRD profiles of selected samples allows detecting the coexistence of the tetragonal and the cubic phases for high doping concentration and high thermal treatment temperatures. Raman experiments suggest the presence of both phases also at relatively low treatment temperatures. - Graphical abstract: Zr{sub 1-x}A{sub x}O{sub 2-x/2} (A=Y, Sc; 0{<=}x{<=}0.12) solid solutions have been prepared as nanostructured powders by thermal decomposition of precursors obtained by freeze-drying, and this synthetic procedure has been scaled up to the 100 g scale. Highlights: Black-Right-Pointing-Pointer Zr{sub 1-x}A{sub x}O{sub 2-x/2} (A=Y, Sc; 0{<=}x{<=}0.12) solid solutions have been prepared as nanostructured powders. Black-Right-Pointing-Pointer The synthetic method involves the thermal decomposition of precursors obtained by freeze-drying. Black-Right-Pointing-Pointer The temperature of the thermal treatment controls particle sizes. Black-Right-Pointing-Pointer The preparation procedure has been scaled up to the 100 g scale. Black-Right-Pointing-Pointer This method is appropriate for the large-scale industrial preparation of multimetallic systems.

36 MATERIALS SCIENCE↗

High-Precision Calculation of Nanoparticle (Nanocrystal) Potentials of Mean Force and Internal Energies

Thermodynamic stability assessment of nanocrystal systems requires precise free energy calculations. This study highlights the importance of meticulous control over various factors, including the thermostat, time step, potential cutoff, initial configuration, sampling method, and overall simulation duration. Free energy computations in dry (solvent-free) systems are on the order of several hundred $k_BT$ but can be obtained with consistent accuracy. However, calculation of internal energies becomes challenging, as they are typically much larger in magnitude than free energies and exhibit significant noise and reduced reliability. To address this limitation, we propose a new internal energy estimate that drastically reduces the noise. Here, we also present formulas that enable the optimization of the parameters of the harmonic bias potential for optimal convergence. Finally, we discuss the implications of these findings for the computation of free energies in nanocrystal clusters and superlattices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Three-dimensional multiphase segmentation of X-ray CT data of porous materials using a Bayesian Markov random field framework

Advancements in noninvasive imaging methods such as X-ray computed tomography (CT) have led to a recent surge of applications in porous media research with objectives ranging from theoretical aspects of pore-scale fluid and interfacial dynamics to practical applications such as enhanced oil recovery and advanced contaminant remediation. While substantial efforts and resources have been devoted to advance CT technology, microscale analysis, and fluid dynamics simulations, the development of efficient and stable three-dimensional multiphase image segmentation methods applicable to large data sets is lacking. To eliminate the need for wet-dry or dual-energy scans, image alignment, and subtraction analysis, commonly applied in X-ray micro-CT, a segmentation method based on a Bayesian Markov random field (MRF) framework amenable to true three-dimensional multiphase processing was developed and evaluated. Furthermore, several heuristic and deterministic combinatorial optimization schemes required to solve the labeling problem of the MRF image model were implemented and tested for computational efficiency and their impact on segmentation results. Test results for three grayscale data sets consisting of dry glass beads, partially saturated glass beads, and partially saturated crushed tuff obtained with synchrotron X-ray micro-CT demonstrate great potential of the MRF image model for three-dimensional multiphase segmentation. While our results are promising and the developed algorithm is stable and computationally more efficient than other commonly applied porous media segmentation models, further potential improvements exist for fully automated operation.

42 ENGINEERING↗

Detection of Landmines by Neutron Backscattering: Effects of Soil Moisture on the Detection System

Detection of buried land mines by using neutron backscattering technique (NBS) is a well established method. It depends on detecting a hydrogen anomaly in dry soil. Since a landmine and its plastic casing contain much more hydrogen atoms than the dry soil, this anomaly can be detected by observing a rise in the number of neutrons moderated to thermal or epithermal energy. But, the presence of moisture in the soil limits the effectiveness of the measurements. In this work, a landmine detection system using the NBS technique was designed. A series of Monte Carlo calculations was carried out to determine the limits of the system due to the moisture content of the soil. In the simulations, an isotropic fast neutron source ({sup 252}Cf, 100 mug) and a neutron detection system which consists of five {sup 3}He detectors were used in a practicable geometry. In order to see the effects of soil moisture on the efficiency of the detection system, soils with different water contents were tested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of vanadium carbide on dry sliding wear behavior of powder metallurgy AISI M2 high speed steel processed by concentrated solar energy

Mixtures of AISI M2 high speed steel and vanadium carbide (3, 6 or 10 wt.%) were prepared by powder metallurgy and sintered by concentrated solar energy (CSE). Two different powerful solar furnaces were employed to sinter the parts and the results were compared with those obtained by conventional powder metallurgy using a tubular electric furnace. CSE allowed significant reduction of processing times and high heating rates. The wear resistance of compacts was studied by using rotating pin-on-disk and linearly reciprocating ball-on-flat methods. Wear mechanisms were investigated by means of scanning electron microscopy (SEM) observations and chemical inspections of the microstructures of the samples. Better wear properties than those obtained by conventional powder metallurgy were achieved. The refinement of the microstructure and the formation of carbonitrides were the reasons for this. - Highlights: •Powder metallurgy of mixtures of M2 high speed steel and VC are studied. •Some sintering is done by concentrated solar energy. •Rotating pin-on-disk and linearly reciprocating ball-on-flat methods are used. •The tribological properties and wear mechanisms, under dry sliding, are studied.

36 MATERIALS SCIENCE↗

Solvent-Free Manufacturing of Lithium-Ion Battery Electrodes via Cold Plasma

Slurry casting has been used to fabricate lithium-ion battery electrodes for decades, which involves toxic and expensive organic solvents followed by high-cost vacuum drying and electrode calendering. This work presents a new manufacturing method using a nonthermal plasma to create inter-particle binding without using any polymeric binding materials, enabling solvent-free manufacturing electrodes with any electrochemistry of choice. The cold-plasma-coating technique enables fabricating electrodes with thickness (>200 μm), high mass loading (>30 mg cm -2 ), high peel strength, and the ability to print lithium-ion batteries in an arbitrary geometry. This crosscutting, chemistry agnostic, platform technology would increase energy density, eliminate the use of solvents, vacuum drying, and calendering processes during production, and reduce manufacturing cost for current and future cell designs. Here, lithium iron phosphate and lithium cobalt oxide were used as examples to demonstrate the efficacy of the cold-plasma-coating technique. It is found that the mechanical peel strength of cold-plasma-coating-manufactured lithium iron phosphate is over an order of magnitude higher than that of slurry-casted lithium iron phosphate electrodes. Full cells assembled with a graphite anode and the cold-plasma-coating-lithium iron phosphate cathode offer highly reversible cycling performance with a capacity retention of 81.6% over 500 cycles. For the highly conductive cathode material lithium cobalt oxide, an areal capacity of 4.2 mAh cm -2 at 0.2 C is attained. We anticipate that this new, highly scalable manufacturing technique will redefine global lithium-ion battery manufacturing providing significantly reduced plant footprints and material costs.

25 ENERGY STORAGE↗

Photo-acoustic spectroscopy and quantum efficiency of Yb{sup 3+} doped alumino silicate glasses

In this contribution, we analyze the effect of several preparation methods of Yb{sup 3+} doped alumino silicate glasses on their quantum efficiency by using photo-acoustic measurements in comparison to standard measurement methods including the determination via the fluorescence lifetime and an integrating sphere setup. The preparation methods focused on decreasing the OH concentration by means of fluorine-substitution and/or applying dry melting atmospheres, which led to an increase in the measured fluorescence lifetime. However, it was found that the influence of these methods on radiative properties such as the measured fluorescence lifetime alone does not per se give exact information about the actual quantum efficiency of the sample. The determination of the quantum efficiency by means of fluorescence lifetime shows inaccuracies when refractive index changing elements such as fluorine are incorporated into the glass. Since fluorine not only eliminates OH from the glass but also increases the “intrinsic” radiative fluorescence lifetime, which is needed to calculate the quantum efficiency, it is difficult to separate lifetime quenching from purely radiative effects. The approach used in this contribution offers a possibility to disentangle radiative from non-radiative properties which is not possible by using fluorescence lifetime measurements alone and allows an accurate determination of the quantum efficiency of a given sample. The comparative determination by an integrating sphere setup leads to the well-known problem of reabsorption which embodies itself in the measurement of too low quantum efficiencies, especially for samples with small quantum efficiencies.

36 MATERIALS SCIENCE↗

Solid state synthesis of metal borohydrides

A method for obtaining solid-state metal borohydrides without toxic precursors and expensive solvents includes dry mixing of metal hydrides and metal polyhydro-closo-borate starting materials. High pressure and heating is also used in the method. These materials can be used for hydrogen storage, general reducing agents, organic synthesis, wastewater treatment, and paper pulp bleaching.

Stavila, Vitalie↗

Methods of forming densified biomass

A method includes densifying a biomass feedstock having a moisture content of at least about 30% by weight and drying the biomass feedstock to form a densified biomass having a moisture content of less than about 10% by weight. Some methods include comminuting a biomass feedstock, pressing the biomass feedstock to form a plurality of pellets, heating the plurality of pellets to remove water therefrom, and cooling the plurality of dried pellets. The plurality of pellets exhibits a moisture content of at least about 20% by weight after pressing. The plurality of dried pellets exhibits a moisture content of less than about 10% by weight. A system for forming densified biomass may include a preheater, a press, and a dryer.

09 BIOMASS FUELS↗

Tribological Behavior of Pulsed Electrodeposited Ni-W/SiC Nanocomposites

Ni-14 at.% W/SiC nanocomposite coatings containing 0-6 vol.% of submicron size (0.35 μm) SiC particles were obtained using pulsed electrodeposition technique on mild steel substrate. The coatings were subsequently characterized for uniformity of SiC distribution, grain size and mechanical properties (hardness and elastic modulus) using SEM, XRD and nanoindentation techniques, respectively. It was observed that the SiC particulates were uniformly distributed within the coating. The coating matrix (Ni-W) also exhibited nanograin size. Tribological behavior of Ni-14 W/SiC nanocomposite was analyzed under dry sliding wear test conditions using pin on disk method. The interrelationship between SiC content, interparticle spacing, mechanical properties and wear behavior was analyzed. The results suggest that whereas hardness and modulus of nanocomposite coatings varied with SiC content as per Rule of Mixtures, wear mechanism can be best explained on the basis of Inverse Rule of Mixtures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tribological properties of PDA + PTFE coating in oil-lubricated condition

In this work the tribological properties of 45 ± 2 μm-thick polytetrafluoroethylene (PTFE) and polydopamine (PDA) + PTFE coatings in oil-lubricated conditions were investigated under a normal load of 10 N and a linear reciprocating speed of 0.1 m/s. Both the PTFE and the PDA + PTFE coatings were deposited using an in-house spray-coating method. The PDA + PTFE coating was five times more durable compared to the PTFE coating in oil-lubricated conditions. Both PTFE and PDA + PTFE coatings showed lower COF in oil-lubricated conditions than in dry conditions. The nanomechanical properties measured by PeakForce Quantitative Nanomechanical (PFQNM) characterization method showed an increase in Young’s modulus and adhesion force for the PDA + PTFE coatings compared to the PTFE coatings. Chemical analysis showed that the cross-linking between PDA and PTFE polymer chains occurred during the high-temperature sintering procedure. Finally, the higher adhesion of PDA + PTFE coating to the cast iron substrate and the stronger cohesion due to the cross-linking between PDA and PTFE contributed to the higher durability of the PDA + PTFE composite coatings.

36 MATERIALS SCIENCE↗

The impact of residual solvent on catholyte performance in solid-state batteries

All-solid-state batteries (ASSBs) are attractive due to their safety, use of the Li metal anode, high energy density, and innovative processing routes. However, high interfacial resistance, especially on the cathode side, is one of the major challenges for commercialization of ASSBs. Catholyte, either a liquid or solid, is added to lower the cathode/electrolyte interfacial resistance. In this study, we find that residual N-methylpyrrolidone solvent remaining in a PVDF/LiTFSI solid polymer catholyte after incomplete drying can dramatically lower the interfacial resistance between the Li 6.25 Al 0.25 La 3 Zr 2 O 12 electrolyte and LiNi 1/3 Mn 1/3 Co 1/3 O 2 cathode-active material. Cells with varying amounts of residual solvent are compared to optimize the residual solvent loading. With moderate residual solvent, the discharge capacity reaches 142 mA h g -1 when cycled at 25 °C and 0.5 C and the capacity retention is 60.5% after 125 cycles. Discharge capacity retention is improved at -10 °C. The conductivity of the free-standing PVDF/LiTFSI film, mimicking the PVDF/LiTFSI catholyte, verifies the role of residual NMP in the cathode. Finally, this study demonstrates the possibility of widely differing results for ASSBs when the cathode is not completely dried. Also, it provides a hint for a potential method to lower the cathode/electrolyte interfacial resistance.

25 ENERGY STORAGE↗

Probing graphene defects and estimating graphene quality with optical microscopy

We report a simple and accurate method for detecting graphene defects that utilizes the mild, dry annealing of graphene/Cu films in air. In contrast to previously reported techniques, our simple approach with optical microscopy can determine the density and degree of dislocation of defects in a graphene film without inducing water-related damage or functionalization. Scanning electron microscopy, confocal Raman and atomic force microscopy, and X-ray photoelectron spectroscopy analysis were performed to demonstrate that our nondestructive approach to characterizing graphene defects with optimized thermal annealing provides rapid and comprehensive determinations of graphene quality.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗