SEARCH · Engineering Papers

Results for “discrete element modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Establishment of a rotor model basis

Radial-dimension computations in the RSRA's blade-element model are modified for both the acquisition of extensive baseline data and for real-time simulation use. The baseline data, which are for the evaluation of model changes, use very small increments and are of high quality. The modifications to the real-time simulation model are for accuracy improvement, especially when a minimal number of blade segments is required for real-time synchronization. An accurate technique for handling tip loss in discrete blade models is developed. The mathematical consistency and convergence properties of summation algorithms for blade forces and moments are examined and generalized integration coefficients are applied to equal-annuli midpoint spacing. Rotor conditions identified as 'constrained' and 'balanced' are used and the propagation of error is analyzed.

Mcfarland, R. E.↗

NASA NTRS1981

Stability of a diffuse linear pinch with axial boundaries

A formulation of the stability behavior of a finite-length pinch is presented. A general initial perturbation is expressed as a uniformly convergent sum over a complete discrete k set. A variational calculation is then performed, based on the energy principle, in which the end-boundary conditions appear as constraints. The requisite Lagrange multipliers mutually couple the elemental periodic excitations. The resulting extended form of delta-W still admits a proper second-variation treatment so that the minimization and stability considerations of Newcomb remain applicable. Comparison theorems are discussed as is the relevance of this end-effect model to the stability of solar coronal loops.

Einaudi, G.↗

NASA NTRS2022

Multi-Scale Modelling of the Bound Metal Deposition Manufacturing of Ti6Al4V

Nonlinear shrinkage of the metal part during manufacturing by bound metal deposition, both on the ground and under microgravity, is considered. A multi-scale physics-based approach is developed to address the problem. It spans timescales from atomistic dynamics on the order of nanoseconds to full-part shrinkage on the order of hours. This approach enables estimation of the key parameters of the problem, including the widths of grain boundaries, the coefficient of surface diffusion, the initial redistribution of particles during the debinding stage, the evolution of the microstructure from round particles to densely-packed grains, the corresponding changes in the total and chemical free energies, and the sintering stress. The method has been used to predict shrinkage at the levels of two particles, of the filament cross-section, of the sub-model, and of the whole green, brown, and metal parts.

Nonlinear shrinkage↗

NASA NTRS1995

Slot spiral antenna modeling using hybrid/mixed FE-BI technique

This report is concerned with the numerical simulation of the printed slot spiral antenna (SSA) using the finite element - boundary integral (FE-BI) analysis. It has been reported that the FE-BI technique is suited for modeling microstrip patch antennas of any shape, printed on layered planar structure or cylindrical platform and fed with a coaxial cable or a microstripline network underneath the radiating elements. However, direct application of the hybrid FE-BI technique to thin slot spirals requires excessive sampling rates to accurately simulate the geometry. To alleviate the meshing/modeling difficulties encountered with cavity-backed slot antennas, we describe a mixed finite element-boundary integral formulation. As in the past, the boundary integral is used to describe the radiation of the slot above the cavity. However the cavity is now modeled using a suitable mix of edge and node elements. The latter are used only at the aperture of the thin slot so that the nodes follow the center line of the slot. In this manner, regular size elements can be used regardless of the slot's width and any meshing restrictions are substantially relaxed. The proposed mixed element FE-BI formulation introduces three different computational regions and as expected this complicates the generation of the discrete system.

Gong, Jian↗

NASA NTRS2001

Equivalent-Continuum Modeling of Nano-Structured Materials

A method has been developed for modeling structure-property relationships of nano-structured materials. This method serves as a link between computational chemistry and solid mechanics by substituting discrete molecular structures with an equivalent-continuum model. It has been shown that this substitution may be accomplished by equating the vibrational potential energy of a nano-structured material with the strain energy of representative truss and continuum models. As an important example with direct application to the development and characterization of single-walled carbon nanotubes, the model has been applied to determine the effective continuum geometry of a graphene sheet. A representative volume element of the equivalent-continuum model has been developed with an effective thickness. This effective thickness has been shown to be similar to, but slightly smaller than, the interatomic spacing of graphite.

Odegard, Gregory M.↗

NASA NTRS1983

Stable feedback control of distributed parameter systems: Time and frequency domain conditions

Large space structures, or any mechanically flexible structures, are inherently distributed parameter systems (DPS) whose dynamics are modeled by partial, rather than ordinary, differential equations. Such DPS are described by operator equations on an infinite-dimensional Hilbert (or Banach) space. However, any feedback controller for such a DPS must be a finite-dimensional (and discrete-time) system in order to be implemented with on-line digital computers and a finite (small) number of actuators and sensors. There are many ways to synthesize such controllers; the Galerkin or finite-element approach is emphasized.

Balas, M. J.↗

NASA NTRS1991

Solution of geometrically nonlinear statics problems by the p-version of the finite element method

This project is concerned with the possibility of using computers for the simulation of structural systems with the same degree of reliability as full scale physical experiments. Reliable numerical simulation will make it possible to reduce the costs of engineering and improve the quality of engineering decisions based on computed information. An error of idealization is an error between the actual physical quantities on which engineering decisions are based (e.g., maximum principal stress, first natural frequency, etc.) and the same data corresponding to the exact solution of the mathematical model. An error of discretization is an error between the quantities of interest corresponding to the exact and approximate solutions of a mathematical model. A high degree of reliability can be achieved in numerical simulation only if both the errors of idealization and errors of discretization can be shown to be small.

Szabo, Barna A.↗

NASA NTRS1985

Geometric-optical Modeling of a Conifer Forest Canopy

The objective of this research is to explore how the geometry of trees in forest stands influences the reflectance of the forest as imaged from space. Most plant canopy modeling has viewed the canopy as an assemblage of plane-parallel layers on top of a soil surface. For these models, leaf angle distribution, leaf area index, and the angular transmittance and reflectance of leaves are the primary optical and geometric parameters. Such models are now sufficiently well developed to explain most of the variance in angular reflectance measurements observed from homogeneous plant canopies. However, forest canopies as imaged by airborne and spaceborne scanners exhibit considerable variance at quite a different scale. Brightness values vary strongly from one pixel to the next primarily as a function of the number of trees they contain. At this scale, the forest canopy is nonuniform and discontinuous. This research focuses on a discrete-element, geometric-optical view of the forest canopy.

Strahler, A. H.↗

NASA NTRS1992

Comparison of radiated noise from shrouded and unshrouded propellers

The ducted propeller in a free field is modeled using the finite element method. The generation, propagation, and radiation of sound from a ducted fan is described by the convened wave equation with volumetric body forces. Body forces are used to introduce the blade loading for rotating blades and stationary exit guide vanes. For an axisymmetric nacelle or shroud, the problem is formulated in cylindrical coordinates. For a specified angular harmonic, the angular coordinate is eliminated, resulting in a two-dimensional representation. A finite element discretization based on nine-node quadratic isoparametric elements is used.

Eversman, Walter↗

NASA NTRS1995

Resolution of the buoyancy in the 8-foot high temperature tunnel combustor

Currently, the 8-Foot High Temperature Tunnel (8-Ft. HTT) combustor produces a good profile at only one point (2000 psia and 3650 R with oxygen enrichment). Air is enriched with oxygen (liquid) so that the combustor product gas will contain the volumetric amount of oxygen normally found in air. The oxygen enriched air has a large fraction that is not reacted and flows through the outer periphery of the fuel injector. This ring of cold air in addition to the relatively cold walls of the combustor set up buoyancy forces that produce a segregation of relatively cool gases at the bottom of the combustor exit. The basic problem is to produce a test gas that has uniform properties at all combustor conditions. The combustor temperature may be as high as 3700 R or as low as 2000 R. Combustor pressures can be as high as 3500 psia (no oxygen enrichment) and as low as 600 psia. The segregation is most severe with oxygen enriched air, since its temperature is lower and its density is high. The combustor is lined with nickel 201 and can be operated at about 1600 R maximum. A global mixing process is desired that produces an acceptable profile of temperature, species, and velocity at the exit of the combustor. The ultimate goal is a temperature profile with about 100 R variance and about 2 percent variance in oxygen. The exit total temperature must not be lowered significantly by the mixing apparatus or mechanisms employed. If immersed bodies are used, they must also be kept very hot. All combustor wall modifications must be able to survive the heat and structural conditions of the varied operating conditions. Our approach to resolving this issue is being conducted in three stages: (1) Consider mixing exclusively, (2) Resolve the heat transfer concerns resulting from the chosen mixing strategy, and (3) Solve the material and structural problems resulting from stages (1) and (2). Since the 8-Ft. HTT is unavailable for experimentation, the study is conducted exclusively with computational fluid dynamic (CPD) codes (Fluent/Uns and Rampant 3.1) using unstructured grid through body fitted coordinates. Both CFD codes are general purpose Navier-Stokes solution packages that can solve integral conservation equations for conservation of mass, momentum and energy. The governing equations are discretized using a control-volume finite-element method on unstructured triangular 2-D grids. In the interest of time, a 3-D tetrahedral grid was used to check the 2-D results on one mixing strategy and the 2-D results were confirmed. Preliminary results indicate that excellent mixing can be achieved with a body placed in the center of the flowing hot fluid with a minor modification to the combustor wall similar to a model positioned in the test section of a wind tunnel. The concept here, is to create longitudinal vortices strong enough to bring both fluids into intimate contact with each other near the wall where the cold fluid resides. However, there may be a trade-off in the choice of mixing strategy, heat transfer and structural requirements. Currently, we are examining the more promising geometries for heat transfer concerns and developing strategies for the material of construction of the center body.

Loney, Norman W.↗

NASA NTRS2007

Modeling Malaria Transmission in Thailand and Indonesia

Malaria Modeling and Surveillance is a project in the NASA Applied Sciences Public Health Applications Program. The main objectives of this project are: 1) identification of the potential breeding sites for major vector species: 2) implementation of a malaria transmission model to identify they key factors that sustain or intensify malaria transmission; and 3) implementation of a risk algorithm to predict the occurrence of malaria and its transmission intensity. Remote sensing and GIs are the essential elements of this project. The NASA Earth science data sets used in this project include AVHRR Pathfinder, TRMM, MODIS, NSIPP and SIESIP. Textural-contextual classifications are used to identify small larval habitats. Neural network methods are used to model malaria cases as a function of precipitation, temperatures, humidity and vegetation. Hindcastings based on these environmental parameters have shown good agreement to epidemiological records. Examples for spatio-temporal modeling of malaria transmissions in Southeast Asia are given. Discrete event simulations were used for modeling the detailed interactions among the vector life cycle, sporogonic cycle and human infection cycle, under the explicit influences of selected extrinsic and intrinsic factors. The output of the model includes the individual infection status and the quantities normally observed in field studies, such as mosquito biting rates, sporozoite infection rates, gametocyte prevalence and incidence. Results are in good agreement with mosquito vector and human malaria data acquired by Coleman et al. over 4.5 years in Kong Mong Tha, a remote village in western Thailand. Application of our models is not restricted to Southeast Asia. The model and techniques are equally applicable to other regions of the world, when appropriate epidemiological and vector ecological parameters are used as input.

Kiang, Richard↗

NASA NTRS1996

Development of a Higher Order Laminate Theory for Modeling Composites with Induced Strain Actuators

A refined higher order plate theory is developed to investigate the actuation mechanism of piezoelectric materials surface bonded or embedded in composite laminates. The current analysis uses a displacement field which accurately accounts for transverse shear stresses. Some higher order terms are identified by using the conditions that shear stresses vanish at all free surfaces. Therefore, all boundary conditions for displacements and stresses are satisfied in the present theory. The analysis is implemented using the finite element method which provides a convenient means to construct a numerical solution due to the discrete nature of the actuators. The higher order theory is computationally less expensive than a full three dimensional analysis. The theory is also shown to agree well with published experimental results. Numerical examples are presented for composite plates with thicknesses ranging from thin to very thick.

Chattopadhyay, Aditi↗

NASA NTRS1975

MTF and point-spread function for a large-area CCD imager

The MTF degradation due to lateral diffusion is calculated for a back illuminated CCD imager for typical device parameters. The discrete nature of the CCD and finite size of the photosensitive elements result in an additional MTF degradation. The Fourier transform approach is utilized to calculate the effective point spread function for these processes in the time domain. Experimental data are presented on the point spread function for a three phase, double level anodized aluminum 160 x 100 thinned and back illuminated CCD imager and compared with the theoretical results. A simple modification of the Crowell and Labuda model suggested by these results is presented.

Ando, K. J.↗

NASA NTRS1990

A comparison of internal energy calculation methods for diatomic molecules

Various methods of calculating the internal energy of diatomic molecules are studied. An accurate and efficient method for computing the eigenvalues of the vibrational Schroedinger equation for an arbitrary potential is developed. The method is based on a finite-element discretization using the cubic Lobatto element. A combination of spectrum slicing and the Laguerre algorithm is used to solve for the eigenvalues. A simple method to compute the quasi-bound states is presented. For N2 molecules, all vibrational-rotational states of eleven available electronic potentials are computed, and summed to obtain the exact internal energy function with temperature. The total computation required 314 seconds of CPU-time on NASA's Cray 2 computer. Various approximate models are discussed and compared with the exact numerical simulation. It is shown that the splitting of the macroscopic internal energy into separate electronic, rotational, and vibrational energies is not justified at high temperatures.

Liu, Yen↗

NASA NTRS1992

Development of 3D electromagnetic modeling tools for airborne vehicles

The main goal of this project is to develop methodologies for scattering by airborne composite vehicles. Although our primary focus continues to be the development of a general purpose code for analyzing the entire structure as a single unit, a number of other tasks are also pursued in parallel with this effort. These tasks are important in testing the overall approach and in developing suitable models for materials coatings, junctions and, more generally, in assessing the effectiveness of the various parts comprising the final code. Here, we briefly discuss our progress on the five different tasks which were pursued during this period. Our progress on each of these tasks is described in the detailed reports (listed at the end of this report) and the memoranda included. The first task described below is, of course, the core of this project and deals with the development of the overall code. Undoubtedly, it is the outcome of the research which was funded by NASA-Ames and the Navy over the past three years. During this year we developed the first finite element code for scattering by structures of arbitrary shape and composition. The code employs a new absorbing boundary condition which allows termination of the finite element mesh only 0.3 lambda from the outer surface of the target. This leads to a remarkable reduction of the mesh size and is a unique feature of the code. Other unique features of this code include capabilities to model resistive sheets, impedance sheets and anisotropic materials. This last capability is the latest feature of the code and is still under development. The code has been extensively validated for a number of composite geometries and some examples are given. The validation of the code is still in progress for anisotropic and larger non-metallic geometries and cavities. The developed finite element code is based on a Galerkin's formulation and employs edge-based tetrahedral elements for discretizing the dielectric sections and the region between the target and the outer mesh termination boundary (ATB). This boundary is placed in conformity with the target's outer surface, thus resulting in additional reduction of the unknown count.

Volakis, John L.↗

NASA NTRS2020

An Algorithm for Characterization of Fiber Aggregation in Composite Microstructures

Composite structures are susceptible to localized flaws, or variability, that drive global failure. To capture this variance, a multiscale model needs to be introduced that not only accurately represents the statistical nature of the composite microstructure but is also efficient. At the microscale, fiber aggregation creates local stress concentrations, where failure is likely to occur sooner than expected. A method of rapid microstructure generation, in conjunction with cluster characterization, is examined to develop accurate reproductions of 2D composite cross-sections. Parameterization of shape and size of fiber clusters is used to characterize representative volume elements. The discrete element method is used to generate pseudo-microstructures. The clustering parameters from the pseudo- and actual microstructure arrangements (obtained from micrographs) can be compared to determine the validity of the representative volume element generated with the discrete element method. Results show a promising approach to evaluating randomness of fiber distributions and how to accurately recreate microstructures for strength analysis.

Carbon fiber↗

NASA NTRS1994

Modeling composite and fluffy grains: The effects of porosity

Recent studies of interplanetary and interstellar dust provide evidence that cosmic dust grains are fluffy, composite objects, highlighting the need for models of the electromagnetic scattering by these grains. Effective medium theory (EMT) with Mie-type series solutions has been used to explore the effects of porosity which would be important in composite dust particles. While this indirect approach is both flexible and computationally efficient, it is not necessarily a good approximation. The need for EMT and its rather restrictive assumptions may be circumvented through a direct computation of the scattering properties via finite element methods, such as the discrete dipole approximation (DDA). Recently, the utility of the DDA method has been advanced significantly through improvements in theory, in numerical algorithms, and in computer hardware. Extensive calculations with the DDA method are used here to examine more directly the effects of porosity. A particular emphasis is placed upon developing a valid methodology. For both solid and porous targets we establish both numerical and physical convergence properties over the range of size parameter that is required for our study. DDA cross sections for grains with a range of porosity are compared to those computed by the EMT/series expansion technique to examine the applicability of several mixing rules, including two extensions of the Bruggeman rule. We show that for particles with Rayleigh vacuum inclusions, the extension proposed by Rouleau & Martin is quite successful. We also investigate the effects of larger, non-Rayleigh vacuum inclusions for various levels of porosity and find that they can be significant.

Wolff, Michael J.↗

NASA NTRS1992

Apollo 15 green glass - Relationships between texture and composition

A suite of 365 Apollo 15 green-glass particles was analyzed by INAA and then described petrographically so that comparisons between composition and physical characteristics could be made. Nonuniform compositional distributions of crystalline and elongate particles were evident, although differences in the distribution of volatile-element coatings and extent of particle breakage were not as striking. A binomial evaluation of these textures on an intergroup basis supports the previously proposed hypothesis that the green-glass groups formed during discrete eruptive events because the groups that were defined compositionally also show significant differences in the average texture and structure of particles. Furthermore, in at least one case (Group D), intragroup differences in the distribution of vitrophyric and vitric particles were apparent. An extension of previous models for pyroclastic volcanism suggests that this feature may indicate that a systematic change in the composition of ejecta occurred as eruption progressed.

Steele, Alison M.↗