Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “direct drive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Electrically enhanced thermochemical cycles for hydrogen generation

In two-step metal-oxide (MO) solar thermochemical cycles, high temperature solar thermal energy is first converted to chemical energy in the form of a reduced MO. The reduced MO is then reoxidized in a second step with steam (or carbon dioxide) to produce hydrogen (or carbon monoxide) at a lower temperature. Solar thermochemical cycles of this type circumvent heat-to-electrical conversion required for electrochemical water splitting and promise high efficiencies. However, significant challenges remain to implementation. Ultra-high temperatures and efficiency-sapping low per-cycle conversion stand out as particularly difficult hurdles. Hybrid approaches utilizing both thermal and electrical energy provide some of the advantages of each, and can facilitate lower temperature operation and offer better per-pass utilization than thermochemical alone. However, early concepts for implementing the thermo-electrochemical approach introduced substantial new challenges including difficult separations, corrosive environments, and energy losses from large temperature swings and phase changes. We are currently investigating two different options for implementation. In the first, a MO that reduces at lower temperature is selected. As the reduced MO lacks the full thermodynamic driving force to effectively split water, the reaction is driven forward by an electrically-assisted proton-conducting membrane that separates and recovers hydrogen as it is produced. This approach produces a pure hydrogen stream, is mechanically simple, and has unique thermodynamic advantages. The second option seeks to more directly couple the electrical boost to the solid MO to drive either the reduction or oxidation step, or both, through the utilization of layered MO materials and advanced reactors. This approach could be applied to both water and carbon dioxide splitting. The results of process modeling and optimization will be presented, and progress towards demonstrating the concepts at the laboratory scale will be discussed.

08 HYDROGEN↗
DOE OSTI2026

Phosphoserine Charge State Drives Ion Condensation and Spatial Polyamine Presentation in Multirepeat Silaffin

Diatom silaffins direct silica biomineralization through heavily post-translationally modified repeat domains, yet how these modifications reshape the multirepeat conformational ensemble remains unknown. We report all-atom MD simulations of a 195-residue construct spanning repeats R1–R7 of Sil1p from Cylindrotheca fusiformis, carrying the full complement of native PTMs: phosphoserine (pSer), long-chain polyamines (LCPA), dimethyllysine (MLY), and trimethylhydroxylysine phosphate (TPL). We simulated three variants (Native, P1/singly deprotonated phosphate, and P2/doubly deprotonated phosphate) at two NaCl concentrations in triplicate for 500 ns each. All systems disorder from the AlphaFold 3 starting structure. Phosphate charge state, not ionic strength, is the dominant control of ensemble compaction and ion organization. Doubly deprotonated phosphate organizes an extensive Na + condensation shell (∼100 ions, 20% of box Na + ) and a heterogeneous bridging network that integrates both pSer and TPL phosphate groups. The resulting ensemble is compact with LCPA side chains exhibiting above-median solvent accessibility in 84% of simulation frames in P2 at 300 mM. This is higher than any other condition we simulated and indicates that polyamine groups are preferentially surface-presented in the most compact, ion-organized state. A charge-neutralization control confirms that this compact state is a structured intermediate maintained by the bridging network, not a simple collapsed globule. Here, this repeat-scale spatial organization is not captured by single-repeat peptide studies. Understanding the dynamics, mechanism, and spatial organization of PTM-rich silaffin at the repeat scale is a step closer to hierarchical biomimetic materials beyond simple silica morphologies.

Amines↗
DOE OSTI2025

Sliding dynamics of skyrmion molecular crystals

Using both atomistic and particle-based simulations, we investigate the current-driven dynamics of skyrmions on two-dimensional periodic substrates when there are multiple skyrmions per substrate minimum. At zero drive, the system forms pinned skyrmion molecular crystal states consisting of dimers, trimers, or dimer-trimer mixtures that have both positional and orientational order. On a square substrate lattice, the motion above depinning occurs via a running soliton that travels completely transverse to the applied current. This motion is generated by a torque from the Magnus force, which rotates the n-mer states perpendicular to the applied current. At higher drives, the flow becomes disordered while the Hall angle diminishes and gradually approaches the intrinsic value. In some cases, we also find directional locking where the Hall angle becomes locked to certain symmetry directions of the substrate over a range of currents. The transitions into and out of directionally locked states are accompanied by negative differential mobility in which the net velocity decreases as the drive increases. In conclusion, on a triangular substrate, we find no transverse mobility effects, but still observe directionally locked motion.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Investigation of deformation mechanisms in an advanced FeCrAl alloy using in-situ SEM-EBSD testing

The deformation mechanisms associated with uniaxial tensile testing are observed by conducting tensile experiments of an FeCrAl alloy using scanning electron microscopy (SEM) coupled with electron backscattered diffraction (EBSD). Prior to the deformation, investigated alloy was consisting grain and precipitate size of ~63.0 μm and ~6.7 μm, respectively. The recorded SEM micrographs and EBSD data at increasing levels of strains revealed the complex phenomena of slip bands’ formation in the presence of surface grain morphology evolution and their (001), (110) and (111) crystallographic planes distortions. The grains with orientation (110)||tensile direction (TD) shows higher shape change; however, (001)||TD and (111)||TD oriented grains show higher lattice gradient formation. Extracted information from the EBSD indicates that the crystallographic rotations drive towards specific, fiber-like texture in relation to the loading direction. Postmortem analysis of the recorded microstructure during the tensile deformation explains the phenomena of crack formation in the hard-intermetallic particles before the ultimate tensile strength (UTS). However, after the UTS, pores were identified in the neck that resulted from extensive plastic deformation. In-depth analysis was carried out to identify the cause of cracks and pores formation phenomena during the tensile test.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Plasmon-Assisted Direct Interfacial Charge Transfer Enables Molecular Photodissociation on Metal Surfaces

Plasmonic photocatalysis is promising for driving reactions out of equilibrium, leading to enhanced rates and selectivity, but the energy and charge transfer mechanism at the interface remains to be explored. Here, we revisit visible-light plasmon-assisted photodissociation of dimethyl disulfide molecules (S–S bond cleavage) over single-crystalline silver and copper surfaces, using density functional theory calculations and the delta self-consistent field method. We investigate different excitation mechanisms and show that the direct intramolecular excitations, as suggested earlier to explain the experimental findings, cannot address the observed catalytic bond activation. Instead, the calculated excitations mediated by the metal Fermi level agree well with the threshold energy and maximum-yield energy in experiments and suggest that the reaction follows a direct interfacial charge transfer mechanism. Furthermore, we show that the excitation energy and the charge transfer can be modulated by introducing excess charges in the systems. Here, this study thus provides a fundamental understanding of interfacial charge transfer for driving plasmonic photocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrohydrodynamically formed structures of carbonaceous material

A method for the electrohydrodynamic deposition of carbonaceous materials utilizing an electrohydrodynamic cell comprising two electrodes comprised of a conductive material, by first combining a solid phase comprising a carbonaceous material and a suspension medium, placing the suspension between the electrodes, applying an electric field in a first direction, varying the intensity of the electric field sufficiently to drive lateral movement, increasing the electrical field to stop the lateral transport and fix the layers in place, then removing the applied field and removing the electrodes. Among the many different possibilities contemplated, the method may advantageously utilize: varying the spacing between the electrodes; removing the buildup from one or both electrodes; placing the electrodes into different suspensions; adjusting the concentration, pH, or temperature of the suspension(s); and varying the direction, intensity or duration of the electric fields.

Aksay, Ilhan A.↗
DOE OSTI2020

Taxonomic and nutrient controls on phytoplankton iron quotas in the ocean

Abstract Phytoplankton iron contents (i.e., quotas) directly link biogeochemical cycles of iron and carbon and drive patterns of nutrient limitation, recycling, and export. Ocean biogeochemical models typically assume that iron quotas are either static or controlled by dissolved iron availability. We measured iron quotas in phytoplankton communities across nutrient gradients in the Pacific Ocean and found that quotas diverged significantly in taxon‐specific ways from laboratory‐derived predictions. Iron quotas varied 40‐fold across nutrient gradients, and nitrogen‐limitation allowed diatoms to accumulate fivefold more iron than co‐occurring flagellates even under low iron availability. Modeling indicates such “luxury” uptake is common in large regions of the low‐iron Pacific Ocean. Among diatoms, both pennate and centric genera accumulated luxury iron, but the cosmopolitan pennate genus Pseudo‐nitzschia maintained iron quotas 10‐fold higher than co‐occurring centric diatoms, likely due to enhanced iron storage. Biogeochemical models should account for taxonomic and macronutrient controls on phytoplankton iron quotas.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Solar-thermal membrane for dewatering aqueous organic-acid solutions

A thermally conductive porous membrane has been developed to directly absorb solar energy and conduct heat that can effectively evaporate liquid water at the interface between the membrane and the bulk feed solution. Here, black, porous, thermally conductive graphite foam support is employed as an effective photothermal-energy absorber and heat conductor that heats up an aqueous feed solution to produce vapor. Graphite nanoparticle-slurry coating is applied onto the foam surface to reduce the pore size and generate a microporous membrane. Then, application of a dense graphene oxide membrane coating as an active separation layer on the microporous nanoparticle surface of internal foam channels allows vapor permeation of volatile molecules. Acetic acid/water solution was studied as a model feed system to experimentally demonstrate effective separation. This model vapor permeation system demonstrates excellent acetic acid separation, with a separation factor of 8.3, under simulated 0.7 sun irradiation. The membrane hydrophobicity and nanostructure, including pore size and surface chemistry, played a significant role in enabling high permselectivity of water vapor over acetic acid molecules, as well as liquid solution. Pore size reduction from open pores to a nonporous dense layer in the membrane enables effective separation of water vapor from the organic vapor, while it reduces the permeation flux. Also, the hydrophilicity of the membrane surface shows ~3 times higher permeation flux with higher permselectivity, compared with the hydrophobic membrane surface. This work introduces a process of directly using renewable energy instead of conventional heating to drive selective separation of water from organic acids.

14 SOLAR ENERGY↗
DOE OSTI2025

Spin-Vibronic Effect in Photoinduced Electron Transfer

The spin-vibronic effect (SVE) accelerates quantum-mechanically forbidden electronic transitions, but experimental manifestations of this phenomenon remain limited. In this contribution, the role of SVE in photoinduced electron transfer (PET) dynamics is probed by coherent vibrational wavepacket (CVWP) motions in Pt­(II) dimer-naphthalene diimide donor–acceptor complexes. Metal–metal-to-ligand charge-transfer (MMLCT) excitation of the donor triggers ballistic PET, driving the molecule away from equilibrium. The SVE then directs the PET trajectory from the 1 MMLCT excited state to an intermediate ligand-centered triplet state, modulating the CVWP dynamics along the reaction coordinates. Herzberg–Teller type oscillations indicate that the Pt–Pt stretching vibration, arising from the formation of the excited triplet intermediate, serves as the reaction coordinate for charge separation. Finally, our experimental findings advance the understanding of the interplay between electronic, vibrational, and spin degrees of freedom in ultrafast photoactivated processes.

Kim, Pyosang [Argonne National Laboratory (ANL), A↗
DOE OSTI2022

Plethora of tunable Weyl fermions in kagome magnet Fe 3 Sn 2 thin films

Interplay of magnetism and electronic band topology in unconventional magnets enables the creation and fine control of novel electronic phenomena. In this work, we use scanning tunneling microscopy and spectroscopy to study thin films of a prototypical kagome magnet Fe 3 Sn 2 . Our experiments reveal an unusually large number of densely-spaced spectroscopic features straddling the Fermi level. These are consistent with signatures of low-energy Weyl fermions and associated topological Fermi arc surface states predicted by theory. By measuring their response as a function of magnetic field, we discover a pronounced evolution in energy tied to the magnetization direction. Electron scattering and interference imaging further demonstrates the tunable nature of a subset of related electronic states. Our experiments provide a direct visualization of how in-situ spin reorientation drives changes in the electronic density of states of the Weyl fermion band structure. Combined with previous reports of massive Dirac fermions, flat bands, and electronic nematicity, our work establishes Fe 3 Sn 2 as an interesting platform that harbors an extraordinarily wide array of topological and correlated electron phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Resilient Operating Constraints for Power Distribution Systems under Setpoint Attacks

Integration and operation of distributed generation (DG) and energy storage (ES) in power distribution systems are enabled by communication networks and embedded sensor and control devices that increase the vulnerability of the systems to cyber-threats, broadening the attack surface and making adversary actions more unpredictable. This paper proposes a methodology that uses ellipsoidal approximations to quantify the potential damage caused by successful attacks that affect, directly or indirectly, the desired operation setpoints and may drive the power distribution operation to unsafe states by violating the limits of voltage or line flows. More specifically, a new methodology is introduced to find the optimal non-symmetric operating constraints that can be imposed to each DG and ES in order to guarantee that the power distribution system is resilient to any malicious setpoints. The proposed method takes as inputs the system topology, DG and ES capabilities, and load limits to solve a convex optimization problem formulated using linear matrix inequalities (LMIs) and the power flow equations. The proposed solution is agnostic to the attacker's action or load profile and it does not require any assumption about the location or means of the attack. The numerical results on a test distribution feeder with several DG and ES illustrate how the proposed resilient operating constraints guarantee the security of the power distribution system under setpoint attacks.

Giraldo, Jairo↗
DOE OSTI2021

Design of 3He Solenoid Power Supply at BNL

The design of the 3He solenoid power supply at Brookhaven National Laboratory (BNL) has been completed and construction is underway. The power supply is an upgrade of the existing Electron Beam Ion Source (EBIS) solenoid power supply and thus can be used as an operational spare. It is also capable of driving a solenoid magnet that rotates the 3He spin direction. The design is based on the original EBIS solenoid power supply, incorporating bipolar output and short circuit protection features to address the expanded requirements for spin rotation. The output current is a half sine wave of 13ms duration at the repetition rate of 5Hz, with the amplitude of 1900A. This paper will discuss the design and construction status of the 3He solenoid power supply.

Tan, Yugang↗
DOE OSTI2020

TRUST-EABM End-of-Year Report: Release FY20

The Delivery Environments (DE) program work package Testbeds to Reduce Uncertainties in Simulations and Tests (TRUST) is designed to quantify and reduce the uncertainty associated with experimental testing and numerical simulation of large engineering assemblies to support the efficient and responsive development of future systems. Because engineering assemblies contain a large number of uncertainty sources, well-characterized testbeds must be designed to isolate individual uncertainty sources. Once quantified, uncertainty sources can be compared to direct research and development funding towards the largest sources driving behavior of interest. Quantified uncertainty may also be propagated through engineering simulations to determine quantitative confidence in simulation predictions and for comparison against uncertainty in the experimental measurements.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

A Study of Pulse-Doppler Radar Pulse Repetition Frequency

Measurements of both long ranges and high velocities pose a contradiction to a pulse-Doppler radar, driving the desired Pulse Repetition Frequency (PRF) in different directions. Often, making one of the measurements unambiguous will make the other ambiguous. The PRF can be adjusted to trade ambiguities in range and velocity, subject to well-defined limits. Various regions of the radar’s operating characteristics in range-velocity space have come to be termed Low-PRF, Medium-PRF, and High-PRF. Selecting a radar operating point, chiefly its PRF, will not only characterize ambiguities that are generated, but also blind ranges and blind velocities. Techniques to mitigate ambiguities and blind regions do exist, allowing substantial extension of the discernable ranges and velocities to the radar.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Tantalum Suboxide Films with Tunable Composition and Electrical Resistivity Deposited by Reactive Magnetron Sputtering

Tantalum-based films with tailored composition, density, and electrical resistivity are of interest for next generation hohlraums for magnetized indirect-drive inertial confinement fusion. Here, we use reactive direct-current magnetron sputtering to deposit tantalum suboxide films with O content in the range of 46–71 at.%. In contrast to a common approach involving varying reactive gas contents, compositional control is achieved kinetically by changing the total chamber pressure and the deposition rate, while keeping the working gas mix of Ar-5%O2 constant. The resultant films are X-ray amorphous with electrical resistivity varying by over seven orders of magnitude. The dominant conduction mechanism changes from metallic to activated tunneling above ∼55 at.% of O, which is characterized by a sharp increase in resistivity and a decrease in the carrier density at low temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Large Propagation-Direction-Dependent Circularly Polarized Emission and Scattering Anisotropies of a Chiral Organic-Inorganic Semiconductor

Chiral materials are important tools for transducing circularly polarized light within many emerging opto-electronic and spin-based technologies. Here, we demonstrate that thin films of a bismuth iodide-based 0D chiral hybrid organic-inorganic semiconductor (HOIS) exhibit large anisotropy values in circularly polarized light emission (CPLE) that approach 50%, with mirror-image responses from front- and back-side measurements. A comprehensive analysis of light-wave propagation, absorption, emission, and scattering is constructed on the basis of a symmetry-derived exciton fine structure model, which accurately describes the direction and polarization dependence of the observed excitonic circular dichroism and CPLE, including contributions from both photoluminescence and resonant Raman scattering. Our analysis indicates that molecular chirality drives preferential film alignment with respect to the out-of-plane lattice vector direction, producing the observed anisotropies. This first demonstration in an HOIS system provides a unique route for enhancing polarization-dependent emission, and circularly polarized light transduction more broadly, in self-assembled HOIS.

14 SOLAR ENERGY↗
DOE OSTI2024

Analysis of Second Target Station Target Segment Removal Dose Rates

This report documents the analysis of the dose rate fields in two configurations of the target system of the Second Target Station (STS) at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) in support of the remote handling target segment removal operation. The two configurations detailed in this report are both assuming 8 hours since beam was incident on the target. The first configuration assumes all shielding is in place just as it was during operation and allows for confirmation of hands-on maintenance capability of the target drive components. The second configuration assumes that a hatch in the target drive room ceiling has been opened to the high bay, the target segment removable core vessel shield block has been removed, and there is a direct line-of-sight to the target segment some 5 m below the target drive room elevation. Dose rate fields in both configurations are documented in this report along with details of the methods of computation. The dose rate fields included in this report are intended to support the engineering of remote handling special equipment and the planning of remote handing operations. The models and analysis detailed in this report are in support of the preliminary design of the STS and future analysis is needed to support the final design of the STS.

61 RADIATION PROTECTION AND DOSIMETRY↗