SEARCH · Engineering Papers

Results for “diffusion maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

NASA NTRS1979

On the rational design of compressible flow ejectors

A fluid mechanics review of chemical laser ejectors is presented. The characteristics of ejectors with single and multiple driver nozzles are discussed. Methods to compute an optimized performance map in which secondary Mach number and performance are computed versus mass ratio, to compute the flow distortion at each optimized condition, and to determine the thrust area for the design point to match diffuser impedence are examined.

Ortwerth, P. J.↗

NASA NTRS1990

Global color and albedo variations on Triton

Global multispectral mosaics of Triton have been produced from Voyager approach images; six spectral units are defined and mapped. The margin of the south polar cap (SPC) is scalloped and ranges in latitude from + 10 deg to -30 deg. A bright fringe is closely associated with the cap's margin; form it, diffuse bright rays extend north-northeast for hundreds of kilometers. Thus, the rays may consist of fringe materials that were redistributed by northward-going Coriolis-deflected winds. From 1977 to 1989, Triton's full-disk spectrum changed from markedly red and UV-dark to nearly neutral white and UV-bright. This spectral change can be explained by new deposition of nitrogen frost over both the northern hemisphere and parts of a formerly redder SPC. Frost deposition in the southern hemisphere during southern summer is possible over relatively high albedo areas of the cap (Stansberry et al., 1990), which helps to explain the apparent stability of the unexpectedly large SPC and the presence of the bright fringe.

Mcewen, Alfred S.↗

DOE OSTI2025

Porosity, swelling, and composition evolution in high-burnup monolithic U-Mo fuel

The microstructural progression of very high-burnup (>8 × 10 21 fissions/cm 3 ) monolithic uranium-molybdenum (U-10wt.%Mo) was analyzed, providing crucial insights into the behavior of post-recrystallized nuclear fuel, where scant data exists. Three focused ion beam cuboids sourced from a fuel plate with varying local burnups of 8.86 × 10 21 , 9.05 × 10 21 , and 9.36 × 10 21 fissions/cm 3 were characterized. The porosity and composition of the samples were evaluated to characterize the evolution of the microstructure as a function of fission density and different locations on the fuel plate, while simultaneously isolating plate-specific parameters such as Zr diffusion barrier thickness, hot-isostatic-pressing conditions, enrichment, and reactor conditions. The porosity was segmented, and the three-dimensional distribution of the porosity was extrapolated from the two-dimensional segmentation. The composition was assessed and quantified using energy-dispersive X-ray spectroscopy areal mapping. The porosity fraction increased as a function of the burnup from 27.77±0.51, 35.12±1.54, and 37.71±0.44 % for 8.86 × 10 21 , 9.05 × 10 21 , and 9.36 × 10 21 fissions/cm 3 , respectively. When compared to literature, the porosity volume fraction plateaus at burnups greater than 6 × 10 21 fissions/cm 3 , while the pore size grows linearly as a function of fission density. The number of large pores increased in number density as a function of burnup, while the smallest pores (<0.3 µm) increased up to 9.05 × 10 21 fissions/cm 3 , followed by a decrease at 9.36 × 10 21 fissions/cm 3 . The delamination and cracking in the fuel plate propagated through an interconnected porosity sublayer identified ∼5 µm from the diffusion barrier. The local swelling of the specimens was within or near the prediction bounds of the Robinson-Williams model for local swelling. The fission products, strontium, barium, cerium, and cesium, precipitated into the pores, while neodymium accumulated adjacent to the pores. Furthermore, these findings have direct implications for the development of fuel performance codes and the accurate documentation of the microstructure evolution in high burnup U-Mo, thus enhancing the safety and efficiency of nuclear fuel usage.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Connectivity‐based parcellation of normal and anatomically distorted human cerebral cortex

Abstract For over a century, neuroscientists have been working toward parcellating the human cortex into distinct neurobiological regions. Modern technologies offer many parcellation methods for healthy cortices acquired through magnetic resonance imaging. However, these methods are suboptimal for personalized neurosurgical application given that pathology and resection distort the cerebrum. We sought to overcome this problem by developing a novel connectivity‐based parcellation approach that can be applied at the single‐subject level. Utilizing normative diffusion data, we first developed a machine‐learning (ML) classifier to learn the typical structural connectivity patterns of healthy subjects. Specifically, the Glasser HCP atlas was utilized as a prior to calculate the streamline connectivity between each voxel and each parcel of the atlas. Using the resultant feature vector, we determined the parcel identity of each voxel in neurosurgical patients ( n = 40) and thereby iteratively adjusted the prior. This approach enabled us to create patient‐specific maps independent of brain shape and pathological distortion. The supervised ML classifier re‐parcellated an average of 2.65% of cortical voxels across a healthy dataset ( n = 178) and an average of 5.5% in neurosurgical patients. Our patient dataset consisted of subjects with supratentorial infiltrating gliomas operated on by the senior author who then assessed the validity and practical utility of the re‐parcellated diffusion data. We demonstrate a rapid and effective ML parcellation approach to parcellation of the human cortex during anatomical distortion. Our approach overcomes limitations of indiscriminately applying atlas‐based registration from healthy subjects by employing a voxel‐wise connectivity approach based on individual data.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1994

Atomic and molecular gas in interstellar cirrus clouds

The dust, atomic gas, and molecular gas content of a sample of 26 of isolated, degree-sized infrared clouds are compared. Half of the clouds have an infrared excess indicating the presence of H2, and 14 contain compact CO-emitting regions. Complete, high angular resolution H I and CO maps of one cloud, G236+39, resolve the transition between atomic and molecular H, as well as the location of CO formation. Assuming the infrared emission traces the total column density, H2 is inferred to be much more widely distributed than the CO. The CO rotational levels are subthermally excited, and the (2 - 1)/(1 - 0) line ratios suggest a density n(H2) approximately 200/cm(exp 3) where CO was detected. A model of H2 formation on grain surfaces balanced by self-shielded photodissociation fits the variation of infrared brightness with H I column density. Assuming a temperature of 80 K, typical of diffuse H2 (Savage et al. 1977), the H2 chemistry requires an average density n(H + 2H2) approximately 50/cm(exp 3). For G236+39, if the distance is 100 pc, the H I and H2 masses are estimated to be 90 and 70 solar mass, respectively. High-resolution H I and infrared maps of a smaller cloud, G249.0+73.7, reveal no evidence for molecular gas, which is likely due to the low total column density through this cloud. These results suggest the H2 and H I content are comparable for some interstellar cirrus clouds with column densities N(H I) greater than 4 x 10(exp 20)/cm(exp 2), even where CO was not detected.

Reach, William T.↗

NASA NTRS2016

Electron Energization and Structure of the Diffusion Region During Asymmetric Reconnection

Results from particle-in-cell simulations of reconnection with asymmetric upstream conditions are reported to elucidate electron energization and structure of the electron diffusion region (EDR). Acceleration of unmagnetized electrons results in discrete structures in the distribution functions and supports the intense current and perpendicular heating in the EDR. The accelerated electrons are cyclotron turned by the reconnected magnetic field to produce the outflow jets, and as such, the acceleration by the reconnection electric field is limited, leading to resistivity without particle-particle or particle-wave collisions. A map of electron distributions is constructed, and its spatial evolution is compared with quantities previously proposed to be EDR identifiers to enable effective identifications of the EDR in terrestrial magnetopause reconnection.

magnetic reconnection↗

DOE OSTI2021

Core–Shell Gold Nanoparticle-Star Copolymer Composites with Gradient Transfer and Transport Properties: Toward Electro-Optical Sensors and Catalysis

A series of hybrid core–shell nanomaterials was prepared by solvent phase transfer methods with gold (Au) nanoparticles (NPs) as a core and star copolymers (h-PEI-b-PCL-Cbz) as a shell—consisting of hyperbranched polyethyleneimine (h-PEI) with different poly(ε-caprolactone) (PCL) chain lengths and a carbazole-contained terminating agent (Cbz). By varying the PCL chain length, these core–shell nanomaterials exhibited gradient energy transfer properties, surface hydrophobicity, electropolymerizability, and ionic probe transport and diffusion properties. The systematic copolymer formation was verified with quadruple-detector size exclusion chromatography (SEC) and 1H nuclear magnetic resonance (NMR). High-resolution atomic force microscopy-infrared spectroscopy (AFM-IR) chemical mapping verified nanoparticle-substrate adhesion and film formation. The design of these hybrid NPs and elucidation of gradient properties will be useful for future applications of the core–shell systems in electro-optical sensing and catalysis.

36 MATERIALS SCIENCE↗

DOE OSTI2022

A tale of a tail: a tidally disrupting ultra-diffuse galaxy in the M81 group

ABSTRACT We present the discovery of a giant tidal tail of stars associated with F8D1, the closest known example of an ultra-diffuse galaxy (UDG). F8D1 sits in a region of the sky heavily contaminated by Galactic cirrus and has been poorly studied since its discovery two decades ago. The tidal feature was revealed in a deep map of resolved red giant branch stars constructed using data from our Subaru Hyper Suprime-Cam survey of the M81 Group. It has an average surface brightness of μg ∼ 32 mag arcsec−2 and can be traced for over a degree on the sky (60 kpc at the distance of F8D1) with our current imagery. We revisit the main body properties of F8D1 using deep multiband imagery acquired with MegaCam on CFHT and measure effective radii of 1.7–1.9 kpc, central surface brightnesses of 24.7–25.7 mag, and a stellar mass of ∼7 × 107M⊙. Assuming a symmetric feature on the other side of the galaxy, we calculate that 30–36 per cent of F8D1’s present-day luminosity is contained in the tail. We argue that the most likely origin of F8D1’s disruption is a recent close passage to M81, which would have stripped its gas and quenched its star formation. As the only UDG that has so far been studied to such faint surface brightness depths, the unveiling of F8D1’s tidal disruption is important. It leaves open the possibility that many other UDGs could be the result of similar processes, with the most telling signatures of this lurking below current detection limits.

Žemaitis, Rokas (ORCID:0000000285660491)↗

DOE OSTI2025

Phase-field model of alloy solidification far from chemical equilibrium at the solid-liquid interface

We further develop a recently introduced phase-field model of far-from-equilibrium alloy solidification under additive manufacturing conditions [K. Ji et al., Phys. Rev. Lett. 130, 026203 (2023)]. This model utilizes enhanced solute diffusivity within the spatially diffuse interface region to quantitatively capture solute trapping with a larger interface width, thereby making simulations on experimentally relevant length and timescales computationally feasible. The main developments presented here include testing the robustness of different variational formulations, extending the model to concentrated alloys by incorporating solid and liquid free energies from thermodynamic databases, as illustrated for hypoeutectic Al-Ag alloys with CALPHAD, extending convergence tests as a function of interface width to 3D, and carrying out simulations in both 2D and 3D to examine existing theories of microstructure development. Our results indicate that the simplest variational formulation that interpolates the bulk free-energy density between its solid and liquid forms is the most robust. Remarkably, for hypoeutectic Al-Ag alloys, this formulation yields a high-velocity nonequilibrium phase diagram that is independent of interface width, thereby demonstrating that the framework of enhanced solute diffusivity can be nontrivially extended to concentrated alloys. Other variational formulations have restricted ranges of materials or processing parameters that can be reliably modeled. We use 2D simulations to construct high-velocity microstructure selection maps for dilute Al-Cu alloys. The results validate the important role of latent heat rejection at the interface and extend the limited predictions of linear stability analysis [A. Karma and A. Sarkissian, Phys. Rev. E 47, 513 (1993)] and sharp-interface 1D simulations to fully nonlinear regimes. Furthermore, 3D simulations, carried out using a computationally tractable axisymmetric cellular/dendritic interface shape, demonstrate a good convergence similar to that observed in 2D as a function of interface width. Full 3D simulations, in turn, reveal that the standard theory of absolute stability is a good predictor of the upper critical velocity beyond which steady-state growth becomes unstable, despite the different morphological manifestations of this instability in 2D and 3D.

36 MATERIALS SCIENCE↗

NASA NTRS1994

Two-dimensional maps of the infrared-to-radio ratio in spiral galaxies

We have produced two-dimensional maps of the intensity ratio Q(sub 60) of 60 micron infrared to 20 cm radio continuum emission, for a set of 25 nearby galaxies, mostly spirals. The ratio maps were obtained from infrared images made using Infrared Astronomical Satellite (IRAS) data with the Maximum Correlation Method, and radio images made using VLA data. Before taking the ratio, the radio images were processed so as to have the same resolution properties as the infrared images; the final spatial resolution in all cases is approximately 1 min, corresponding to 1-2 kpc for most galaxies. These images allow us to study the variations for the Q(sub 60) ratio with unprecedented spatial resolution, and thus represents a major improvement over earlier work. Our new high-resolution maps confirm the slow decrease of Q(sub 60) with increasing radial distance from the nucleus, but show additional structure which is probably associated with separate sites of active star formation in the spiral arms. The maps show Q(sub 60) to be more closely related to infrared surface brightness than to the radial distance in the galaxy disk. We expect that the results will provide improved constraints on the evolution (diffusion, decay and escape) of cosmic-ray electrons in the magnetic field of the disks.

Marsh, Kenneth A.↗

DOE OSTI2023

A novel design of transitional layer structure between reduced activation ferritic martensitic steels and tungsten for plasma facing materials

Plasma-facing components (PFCs) are among the most critical gaps for fusion energy to establish technical and economic feasibility. Tungsten as a first wall/blanket material in PFCs requires to be integrating with reduced activation ferritic martensitic (RAFM) steels as a structural component. Currently, major drawbacks are the requirement of brazing, the formation of a brittle interface, and a large difference between the coefficients of thermal expansion of tungsten and steel. Here, a novel transitional multilayer structure was designed and investigated to join tungsten and RAFM steels using three interlayers. The composition of each interlayer was selected based on computational thermodynamics and diffusion kinetics to ensure a body-centered cubic (bcc) single-phase structure and prevent the formation of a brittle intermetallic phase region in the temperature range of 600–1150 °C. Although the transitional layer structure was designed for additive manufacturing, spark plasma sintering (SPS) as proof of concept was used to bond the individual layers. Interfaces were investigated using scanning and transmission electron microscopy methods but no layered intermetallic phase was observed. Nanoindentation maps across the interface suggest major hardness differences at the interface between tungsten and the vanadium interlayer, as well as the interface between RAFM steel and the FeCrAl interlayer.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Homoepitaxial growth of 9,10-diphenylanthracene

Organic single crystals are often shown to have significantly improved optoelectronic properties over polycrystalline thin films such as exciton diffusivity and carrier mobility. There is growing interest in incorporating such crystals in organic electronics despite a number of challenges. In this work, the homoepitaxial vapor phase growth modes for 9,10-diphenylanthracene (DPA) homoepitaxy are mapped as a function of growth rate and temperature using in situ ultra-low current reflection high energy electron diffraction (RHEED), X-ray diffraction (XRD), and atomic force microscopy (AFM). Vapor phase deposition was performed on free-standing single crystal DPA substrates, which show clear Kikuchi patterns. At room temperature, a transition from Frank-Van der Merwe layer-by-layer growth to step-flow growth is observed as the deposition rate is decreased, while at lower temperatures a Stranski-Krastanov layer-plus-island growth is observed. This is the first demonstration of true step-flow growth from room temperature vapor phase deposition for organic semiconductors and is reminiscent of traditional semiconductor growth regimes. Accordingly, these results could lead to improved control over growth and doping of organic single crystals, and lead to enhanced single crystal organic optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

GeSn alloys with ∼21% Sn grown by effusion cell molecular beam epitaxy

We report the epitaxial growth of high quality GeSn alloys with Sn compositions up to 21.25 ± 1% by effusion-cell molecular beam epitaxy (MBE). Achieving such a high Sn content with effusion cells is particularly significant, since these sources typically impose stronger radiative heating on the substrate, which is a factor long considered a major obstacle to high-Sn GeSn epitaxy. Contrary to the prevailing assumption that high growth rates are good for suppressing Sn segregation, we demonstrate that carefully controlled low fluxes, combined with stable ultra-low substrate temperatures, enable significant Sn incorporation even under effusion-cell conditions. Structural analyses by high-resolution x-ray diffraction, reciprocal space mapping, atomic force microscopy, and transmission electron microscopy confirm sharp interfaces, high crystallinity, and smooth surfaces at high Sn contents. Furthermore, these findings establish the feasibility of MBE-grown high-Sn GeSn even under diffusion cells, thereby broadening opportunities for Si-compatible photonic and quantum devices.

Alloys↗

NASA NTRS1981

X-ray scanning of overhead aurorae from rockets

Two Nike Tomahawk rocket payloads were launched into energetic auroral events in September, 1976 to investigate the structure of these events, as well as their effects on the atmosphere. X-ray scintillation detectors with energy discrimination in four ranges were used to measure the deposition of bremsstrahlung produced X-rays within the stratosphere and mesosphere. Iterative computer techniques were used to reconstruct X-ray source maps at 100 km, taking atmospheric absorption effects into account. Payload 18.178 was launched on September 21st into an aurora having two distinct azimuthal regions of optical brightness. The X-ray scanner detected the same features, and overlays of the X-ray source maps on all-sky photographs showed spatial coincidence of the X-ray with optical features at the lower energies (below 40 keV). Payload 18.179 was launched September 23rd into an aurora with a more diffuse character. The optical structure did not coincide as well with the measured X-ray structure. There was also an indication of a two-component spectrum for each event, with the hard component originating in the more diffuse, optically faint regions.

Barcus, J. R.↗

NASA NTRS1983

A comparison of high resolution optical and radio observations of W3

High resolution maps of the W3 complex for radio continuum and selected optical emission lines are used to derive the visual extinction A(V), the excitation, and the evolutionary state of the component H II regions. A large diffuse H II region in the east, which is the most highly evolved of this type, is found, together with a southern complex of H II regions and a northern complex of young and compact H II regions still embedded in the W3 molecular core. A comparison of the observed dust distribution with ionized and atomic hydrogen and several other molecules in W3 shows the functional relationship between the C-130 column density and A(V) to be in accord with Strohacker's (1978) result for dark clouds.

Dickel, H. R.↗

NASA NTRS1986

Blazars with arcminute-scale radio halos

About 10-arcsec resolution 20-cm wavelength maps are presented for three nearby BL Lac objects: Mkn 180, whose halo has a linear size of 85 kpc, 2155-304, with a halo about 375 kpc across, and 1727 + 502, whose one-sided diffuse emission extends to a distance of about 145 kpc from its radio core. Little evidence is found for strong radio variability in the cores of the three blazars; these and other results obtained are consistent with the assertion that the three objects should be classified as normal low luminosity double radio galaxies with optically dull nuclei, if seen from other directions.

Ulvestad, J. S.↗

NASA NTRS1994

Cold, warm, and hot gas in the late-stage merger NGC 7252

We present the first observations of the neutral hydrogen distribution and x-ray emission in the prototypical merger remnant NGC 7252, the 'Atoms-for-Peace' galaxy. These data are supplemented by accurate B and R surface photometry, reaching a limit of mu(sub B) = 26.5 mag/sq arcsec, and images taken through a narrow-band H alpha filter. We find all of the 2 x 10(exp 9)/sq h solar mass of atomic gas to be restricted to the outer, tidal regions of this system (H(sub zero) = 100 h km/s/Mpc). By contrast, the molecular gas traced by the (12)CO(1 approaches zero) map of Wang et al. (1992) is confined to an inner rotating disk of radius 7 seconds and has an H alpha counterpart. The gap between the atomic and molecular gas distributions is filled in by diffuse H alpha emission and perhaps by x-ray emission. The velocity field of the atomic gas in the tidal tails indicates that they are swinging through space in the same sense as the rotation of the inner gas disk. The H I at the apparent base of the northwestern tail seems to be falling back toward the main body of the galaxy, yet there is no H I associated with this main stellar body: This suggests ongoing efficient conversion of the atomic gas into other phases in this region. The H alpha velocity anomalies previously found in the remnant body may be produced in part by the combination of tail-related, noncircular motions and the inner gas-disk rotation. Both tidal tails have bluer B-R colors than the main body of the remnant, with the bluest regions coinciding with peaks in the gas column density. Each tail contains one giant H II region near the end of its optical light distribution. These H II regions are associated with large concentrations of gas and stars that approach the sizes and gas contents of dwarf galaxies. The H I extends beyond the end of the optical tails and reaches projected distances of 62/h kpc east and 120/h kpc northwest from the center. We discuss the possible relevance of these data to : (1) the transformation of merged spirals into ellipticls; (2) the generation of ripples by returning tidal material; and (3) the formation of bound stellar systems from tidally torn material.

Hibbard, J. E.↗

NASA NTRS2019

Evidence for C II Diffuse Line Emission at Redshift z∼2.6

C II is one of the brightest emission lines from star-forming galaxies and is an excellent tracer for star formation. Recent work measured the C II emission line amplitude for redshifts 2 < z < 3.2 by cross-correlating Planck High Frequency Instrument emission maps with tracers of overdensity from the Baryon Oscillation Spectroscopic Sky Survey, finding I(CII)=6.6(sup +5.0, sub −4.8×10(exp 4) Jy/sr at 95per cent confidence level. In this paper, we present a refinement of this earlier work by improving the mask weighting in each of the Planck bands and the precision in the covariance matrix. We report a detection of excess emission in the 545 GHz Planck band separate from the cosmic infrared background (CIB) present in the 353–857 GHz Planck bands. This excess is consistent with redshifted C II emission, in which case we report b(CII)I(CII)=2.0(sup +1.2, sub −1.1×10(exp 5) Jy/sr at 95 per cent confidence level, which strongly favours many collisional excitation models of C II emission. Our detection shows strong evidence for a model with a non-zero C II parameter, though line intensity mapping observations at high spectral resolution will be needed to confirm this result.

Shengqi Yang↗