Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “detect and avoid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Effects of Unmanned Aircraft Voice Communication Delay on En Route Air Traffic Management Operations

The present study investigated the effects of remotely piloted unmanned aircraft (UA) voice communication delay on air traffic management operations with different background sector traffic-volume levels. Three one-way UA voice delay lengths of 400, 900, and 2,000 milliseconds (ms) were tested, representing the currently estimated transmission delays for terrestrial, satellite communication (SATCOM), and long SATCOM Command and Control Link System, respectively. All delay values exceeded 390 ms, the FAA’s current requirement for the maximum communication latency in the National Airspace System. Eight retired en route air traffic controllers (ATCs) and eight remote pilots (RPs) participated in a human-inthe-loop simulation study, where a simulated UA flight transitioned through an Oakland en route low-altitude sector to a local non-towered airport. The results showed that, when the 2,000-ms voice delay was present, radio transmission step-ons and detect-and-avoid (DAA) alert level elevations increased. In addition, ATC workload, ATC acceptability for the UA, and RP acceptability for the DAA were negatively affected only when the UA had a 2,000-ms voice delay under the high traffic-volume condition, but not in the other conditions.

remotely piloted unmanned aircraft, voice delay, s↗

Effects of Unmanned Aircraft Voice Communication Delay on En Route Air Traffic Management Operations

The present study investigated the effects of remotely piloted unmanned aircraft (UA) voice communication delay on air traffic management operations with different background sector traffic-volume levels. Three one-way UA voice delay lengths of 400, 900, and 2,000 milliseconds (ms) were tested, representing the currently estimated transmission delays for terrestrial, satellite communication (SATCOM), and long SATCOM Command and Control Link System, respectively. All delay values exceeded 390 ms, the FAA’s current requirement for the maximum communication latency in the National Airspace System. Eight retired en route air traffic controllers (ATCs) and eight remote pilots (RPs) participated in a human-in-the-loop simulation study, where a simulated UA flight transitioned through an Oakland en route low-altitude sector to a local non-towered airport. The results showed that, when the 2,000-ms voice delay was present, radio transmission step-ons and detect-and-avoid (DAA) alert level elevations increased. In addition, ATC workload, ATC acceptability for the UA, and RP acceptability for the DAA were negatively affected only when the UA had a 2,000-ms voice delay under the high traffic-volume condition, but not in the other conditions.

remotely piloted unmanned aircraft, voice delay, s↗

Hazard Boresight Relative Navigation for Safe Lunar Landing

Hazard Boresight Relative Navigation greatly simplifies Hazard Detection and Avoidance methodologies by providing a common interface between the Hazard DEM, the Safe Site Selection Algorithm, the size of the landing ellipse, the divert distance and the Guidance targeting algorithm. After the Safe Site is selected from the DEM, Hazard Boresight Relative Navigation will replace the original planet target with the boresight target. The location of the safe site relative to the boresight is sent back to GNC for the divert maneuver.

Stephen R. Steffes↗

DANTi, DAA in the Cockpit

DANTi is a prototype Electronic Flight Bag which incorporates an assistive Detect and Avoid (DAA) capability developed by NASA.

Maria Consiglio↗

Safety Demonstrator Series for an In-Time Aviation Safety Management System

NASA's Advanced Air Mobility Integration Office has coordinated a meeting with the National Research Council Canada (NRC) to have an interchange of technical area activities to evaluate merit for international partnership. Both NASA and NRC will provide a brief overview of their Advanced Air Mobility activities. Additional aeronautics projects will have an opportunity to present a few slides on current activities and plans. Topics include wildfire, vehicle automation technologies and detect and avoid, and national campaign flight initiatives. NASA's System-Wide Safety (SWS) Project will provide a high-level overview of the the safety demonstrator series. The project has scheduled operational demonstrations of an in-time aviation safety management system across a series of disaster-oriented operations. First up is a wildland fire demonstration scheduled for 2025. Opportunities for synergy will be discussed.

system-wide safety↗

m:N Working Group Spring Meeting Summary

On May 9th and 11th, 2023, the NASA-led MultiVehicle (m:N) Working Group and its subgroups [small Unmanned Aircraft Systems (sUAS), Large UAS, High Altitude Pseudo Satellite (HAPS), and Urban Air Mobility (UAM)] met in Denver, CO at XPONENTIAL 2023, co-hosted by the Association for Uncrewed Vehicle Systems International (AUVSI) and Messe Düsseldorf North America (MDNA), for an in-person meeting. The subgroups meet multiple times throughout the year, virtually. Twice a year, however, participants from all the subgroups come together to brief each other on progress, challenges, and path forward ideas for incorporating UAS into the airspace. The m:N working group is co-chaired by Jay Shively (Adaptive Aerospace) and Andy Thurling (Thurling Aero Consulting) and is comprised of members from government, industry, and academia in an effort to identify and reduce barriers to m:N operations. This effort also includes identifying requirements, use cases, and metrics to support organizations and groups, including the FAA and RTCA’s SC-228 Detect and Avoid.

multi-vehicle↗

m:N Working Group

On November 29th and 30th, 2022, the m:N UAS working group and its subgroups [small Unmanned Aircraft Systems (sUAS), Large UAS, High Altitude Platform Systems (HAPS), and Urban Air Mobility (UAM)] met at the NASA Ames Research Center in Mountain View, CA for an in person meeting. The option to dial in remotely and use Conference.IO to engage with questions was offered as well. The subgroups meet multiple times throughout the year, virtually. Twice a year however, participants from all the subgroups come together to brief each other on progress, challenges, and path forward ideas for incorporating UAS into the airspace. The m:N UAS working group is run by Jay Shively (Adaptive Aerospace) and Andy Thurling (Thurling Aero Consulting) and is comprised of members from government, industry, and academia in an effort to identify and reduce barriers to m:N operations. This effort also includes identifying requirements, use cases, and metrics to support organizations and groups including the FAA and RTCA’s SC-228 Detect and Avoid. Each subgroup is run by a government/industry team.

multi-vehicle↗

m:N Working Group Annual Status Report

This document serves as an annual report of m:N Unmanned Aircraft Systems (UAS) subgroup activities, addressed challenges, and roadmaps for the future. The subgroups consist of small Unmanned Aircraft Systems (sUAS), Large UAS, High Altitude Platform Systems (HAPS), and Urban Air Mobility (UAM). Also included in this report are participant lists for each subgroup (Appendix B) and future roadmap and outreach plans.The subgroups meet in a virtual format multiple times throughout the year. Twice a year, participants from all the subgroups come together as part of the m:N working group to brief each other in person on progress, challenges, and path forward ideas for successful incorporation of UAS into the airspace. Recent m:N in person meetings include: - November 29-30, 2022 at the NASA Ames Research Center in Mountain View, CA - May 9 & 11, 2023 at AUVSI’s Xponential conference in Denver, CO - The next in person working group meeting is planned for November 28-30, 2023 at NASA Langley in Hampton, Virginia The m:N UAS working group is run by Jay Shively (Adaptive Aerospace) and Andy Thurling (Thurling Aero Consulting) and is comprised of members from government, industry, and academia in an effort to identify and reduce barriers to m:N operations. This effort also includes identifying requirements, use cases, and metrics to support organizations and groups including the Federal Aviation Administration (FAA) and Radio Technical Commission for Aeronautics (RTCA’s) SC-228 Detect and Avoid committee.

multi-vehicle↗

Formal Methods in the Air

This is an overview of some of the successes of the Formal Methods team at NASA Langley. It includes discussion of the development of the Well-Clear definition for uncrewed aircraft and the subsequent creation of the DAIDALUS Detect and Avoid library, followed by discussion of the team's verification of the Compact Position Reporting algorithm, which led to the development of tools for floating-point analysis.

Formal Methods↗

Robust and cybersecure coordinated unintentional island detection for microgrids

Unintentional islanding (UI) of a circuit of distributed energy resources (DERs) may leave area electrical power systems (EPS), external to the DER circuit, energized. Thus, UI detection methods have been developed to detect unintentional islanding and trigger a UI response. However, individual UI detection methods have various deficiencies. Thus, a consensus-based UI detection process is disclosed that builds a consensus from multiple UI detection sources, optionally implementing different UI detection methods. The redundancy in this consensus-based UI detection process provides robust, sensitive, selective, and cybersecure UI detection for the entire DER circuit. For example, the consensus-based UI detection process may eliminate or reduce non-detection zones, avoid false positives, thwart cyber-attacks, and/or the like.

Brissette, Alex↗

Mutual Detectability: A Targeted SETI Strategy That Avoids the SETI Paradox

As our ability to undertake searches for extraterrestrial intelligence (SETI) grows, so does interest in the controversial endeavor of messaging extraterrestrial intelligence (METI). METI proponents point to the SETI Paradox—if all civilizations refrain from METI then SETI is futile. I introduce mutual detectability as a game-theoretic strategy to increase the success potential of targeted SETI. Mutual detectability comprises four laws that establish how SETI participants can engage each other based on mutual evidence of mutual existence. I argue that the party whom both SETI participants can judge to have better quality evidence, or common denominator information (CDI), has an onus to transmit to avoid the SETI Paradox. Transiting exoplanets within the Earth Transit Zone form a target subset that satisfies mutual detectability requirements. I identify the intrinsic time-integrated transit signal strength, which for Earth is 10{sup 3} L{sub ⊙} ppm hours yr{sup −1}, as suitable CDI. Civilizations on habitable-zone planets of radius R{sub p}/R{sub ⊕}≲(L{sub ∗}/L{sub ⊙}){sup −1/7} have superior CDI on us, and so under the mutual detectability framework have game-theory incentive (onus) to transmit. While the onus to transmit falls on us for habitable planets around L{sub *} > L{sub ⊙} stars, considerations of relative stellar frequency, main-sequence lifetime and planet occurrence rates mean that such systems are likely to be in a small minority. Surveys of the Earth Transit Zone for Earth-analog transiting planets around subsolar luminosity hosts would facilitate targeted SETI programs for civilizations who have game-theory incentive to transmit signals to us. A choice to remain silent, by not engaging in METI toward such systems, does not in this case fuel concerns of a SETI Paradox.

79 ASTRONOMY AND ASTROPHYSICS↗

Object sense and avoid system for autonomous vehicles

A system for determining a travel path for an autonomous vehicle (“AV”) to travel to a target while avoiding objects (i.e., obstacles) without the use of an imaging system is provided. An object sense and avoid (“OSA”) system detects objects in an object field that is adjacent to the AV and dynamically generates, as the AV travels, a travel path to the target to avoid the objects. The OSA system repeatedly uses sensors to collect sensor data of any objects in the object field. An object detection system then detects the objects and determines their locations based on triangulating ranges to an object as indicated by different sensors. The path planner system then plans a next travel direction for the AV to avoid the detected objects while seeking to minimize the distance traveled. The OSA system then instructs the AV to travel in the travel direction.

Beer, N. Reginald↗

Evaluating the Performance of Unmanned Ground Vehicle Water Detection

Water detection is a critical perception requirement for unmanned ground vehicle (UGV) autonomous navigation over cross-country terrain. During the Robotics Collaborative Technology Alliances (RCTA) program, the Jet Propulsion Laboratory (JPL) developed a set of water detection algorithms that are used to detect, localize, and avoid water bodies large enough to be a hazard to a UGV. The JPL water detection software performs the detection and localization stages using a forward-looking stereo pair of color cameras. The 3D coordinates of water body surface points are then output to a UGV's autonomous mobility system, which is responsible for planning and executing safe paths. There are three primary methods for evaluating the performance of the water detection software. Evaluations can be performed in image space on the intermediate detection product, in map space on the final localized product, or during autonomous navigation to characterize the avoidance of a variety of water bodies. This paper describes a methodology for performing the first two types of water detection performance evaluations.

stereo vision↗

MPI Runtime Error Detection with MUST: Advances in Deadlock Detection

The widely used Message Passing Interface (MPI) is complex and rich. As a result, application developers require automated tools to avoid and to detect MPI programming errors. We present the Marmot Umpire Scalable Tool (MUST) that detects such errors with significantly increased scalability. We present improvements to our graph-based deadlock detection approach for MPI, which cover future MPI extensions. Our enhancements also check complex MPI constructs that no previous graph-based detection approach handled correctly. Finally, we present optimizations for the processing of MPI operations that reduce runtime deadlock detection overheads. Existing approaches often require 𝒪( p ) analysis time per MPI operation, for p processes. We empirically observe that our improvements lead to sub-linear or better analysis time per operation for a wide range of real world applications.

Hilbrich, Tobias↗

Effects of Electromagnetic Fields on Fish and Invertebrates: Task 2.1.3: Effects on Aquatic Organisms

This fiscal year (FY) 2011 progress report (Task 2.1.3 Effects on Aquatic Organisms, Subtask 2.3.1.1 Electromagnetic Fields) describes studies conducted by PNNL as part of the DOE Wind and Water Power Program to examine the potential effects of electromagnetic fields (EMF) from marine and hydrokinetic devices on aquatic organisms, including freshwater and marine fish and marine invertebrates. In this report, we provide a description of the methods and results of experiments conducted in FY 2010-FY 2011 to evaluate potential responses of selected aquatic organisms. Preliminary EMF laboratory experiments during FY 2010 and 2011 entailed exposures with representative fish and invertebrate species including juvenile coho salmon (Oncorhynchus kisutch), Atlantic halibut (Hippoglossus hippoglossus), California halibut (Paralicthys californicus), rainbow trout (Oncorhynchus mykiss), and Dungeness crab (Metacarcinus magister). These species were selected for their ecological, commercial, and/or recreational importance, as well as their potential to encounter an MHK device or transmission cable during part or all of their life cycle. Based on previous studies, acute effects such as mortality were not expected to occur from EMF exposures. Therefore, our measurement endpoints focused on behavioral responses (e.g., detection of EMF, interference with feeding behavior, avoidance or attraction to EMF), developmental changes (i.e., growth and survival from egg or larval stage to juvenile), and exposure markers indicative of physiological responses to stress. EMF intensities during the various tests ranged from 0.1 to 3 millitesla, representing a range of upper bounding conditions reported in the literature. Experiments to date have shown there is little evidence to indicate distinct or extreme behavioral responses in the presence of elevated EMF for the species tested. Several developmental and physiological responses were observed in the fish exposures, although most were not statistically significant. Additional species are currently planned for laboratory testing in the next fiscal year (e.g. an elasmobranch, American lobster) to provide a broader assessment of species important to stakeholders. The collective responses of all species will be assessed in terms of life stage, exposure scenarios, and biological relevance, to address current uncertainties related to effects of EMF on aquatic organisms.

54 ENVIRONMENTAL SCIENCES↗

Luminous dark matter

We propose a dark matter model in which the signal in direct detection experiments arises from electromagnetic, not nuclear, energy deposition. This can provide a novel explanation for the DAMA result while avoiding many direct detection constraints. The dark matter state is taken nearly degenerate with another state. These states are naturally connected by a dipole moment operator, which can give both the dominant scattering and decay modes between the two states. The signal at DAMA then arises from dark matter scattering in the Earth into the excited state and decaying back to the ground state through emission of a single photon in the detector. This model has unique signatures in direct detection experiments. The density and chemical composition of the detector is irrelevant - only the total volume affects the event rate. In addition, the spectrum is a monoenergetic line, which can fit the DAMA signal well. This model is readily testable at experiments such as CDMS and XENON100 if they analyze their low-energy, electronic recoil events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Semi autonomous mine detection system

CMMAD is a risk reduction effort for the AMDS program. As part of CMMAD, multiple instances of semi autonomous robotic mine detection systems were created. Each instance consists of a robotic vehicle equipped with sensors required for navigation and marking, a countermine sensors and a number of integrated software packages which provide for real time processing of the countermine sensor data as well as integrated control of the robotic vehicle, the sensor actuator and the sensor. These systems were used to investigate critical interest functions (CIF) related to countermine robotic systems. To address the autonomy CIF, the INL developed RIK was extended to allow for interaction with a mine sensor processing code (MSPC). In limited field testing this system performed well in detecting, marking and avoiding both AT and AP mines. Based on the results of the CMMAD investigation we conclude that autonomous robotic mine detection is feasible. In addition, CMMAD contributed critical technical advances with regard to sensing, data processing and sensor manipulation, which will advance the performance of future fieldable systems. As a result, no substantial technical barriers exist which preclude – from an autonomous robotic perspective – the rapid development and deployment of fieldable systems.

42 ENGINEERING↗