Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “depth profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Orbital velocities induced by surface waves

During the third intensive observational period of the Surface Wave Dynamics Experiment (SWADE), an aircraft-based experiment was conducted on 5 March 1991 by deploying slow-fall airborne expendable current profilers (AXCPs) and airborne expendable bathythermographs (AXBTs) during a scanning radar altimeter (SRA) flight on the NASA NP-3A research aircraft. As the Gulf Stream (GS) moved into the SWADE domain in late February, maximum upper-layer currents of 1.98 m/s were observed in the core of the baroclinic jet where the vertical current shears were O(10(exp -2)/s). The SRA concurrently measured the sea surface topography, which was transformed into two-dimensional directional wave spectra at 5-6-km intervals along the flight tracks. The wave spectra indicated a local wave field with wavelengths of 40-60 m propagating southward between 120 deg and 180 deg, and a northward-moving swell field from 300 deg to 70 deg associated with significant wave heights of 2-4 m. As the AXCP descended through the upper ocean, the profiler sensed orbital velocity amplitudes of 0.2-0.5 m/s due to low-frequency surface waves. These orbital velocities were isolated by fitting the observed current profiles to the three-layer model based on a monochromatic surface wave, including the steady and current shear terms within each layer. The depth-integrated differences between the observed and modeled velocity profiles were typically less than 3 cm/s. For 17 of the 21 AXCP drop sites, the rms orbital velocity amplitudes, estimated by integrating the wave spectra over direction and frequency, were correlated at a level of 0.61 with those derived from the current profiles. The direction of wave propagation inferred from the AXCP-derived orbital velocities was in the same direction observed by the SRA. These mean wave directions were highly correlated (0.87) and differed only by about 5 deg.

Shay, Lynn K.↗

Lidar Observations of Tropospheric Aerosols Over Northeastern South Africa During the ARREX and SAFARI-2000 Dry Season Experiments

During the ARREX-1999 and SAFARI-2000 Dry Season experiments a micropulse lidar (523 nm) instrument was operated at the Skukuza Airport in northeastern South Africa. The Mar was collocated with a diverse array of passive radiometric equipment. For SAFARI-2000 the processed Mar data yields a daytime time-series of layer mean/derived aerosol optical properties, including extinction-to-backscatter ratios and vertical extinction cross-section profile. Combined with 523 run aerosol optical depth and spectral Angstrom exponent calculations from available CIMEL sun-photometer data and normalized broadband flux measurements the temporal evolution of the near surface aerosol layer optical properties is analyzed for climatological trends. For the densest smoke/haze events the extinction-to-backscatter ratio is found to be between 60-80/sr, and corresponding Angstrom exponent calculations near and above 1.75. The optical characteristics of an evolving smoke event from SAFARI-2000 are extensively detailed. The advecting smoke was embedded within two distinct stratified thermodynamic layers, causing the particulate mass to advect over the instrument array in an incoherent manner on the afternoon of its occurrence. Surface broadband flux forcing due to the smoke is calculated, as is the evolution in the vertical aerosol extinction profile as measured by the Han Finally, observations of persistent elevated aerosol during ARREX-1999 are presented and discussed. The lack of corroborating observations the following year makes these observation; both unique and noteworthy in the scope of regional aerosol transport over southern Africa.

Campbell, James R.↗

Modelling CLPX IOP3 Radiometric Data by Means of the Dense Media Theory: Preliminary Results for the LSOS Test Site

The capabilities of the Dense Media Radiative Transfer model using the Quasi Crystalline Approximation with Coherent Potential (QCA-CP) to reproduce measured radiometric data were tested using the University of Tokyo Ground Based Microwave Radiometer (GBMR-7) during the third Intensive Observation Period (IOP3) of the NASA Cold-land Processes Field Experiment (CLPX). The data were collected at the Local-Scale Observation Site (LSOS), a 0.8-ha study site consisting of two open meadows separated by trees. Intensive measurements were also made of snow depth and temperature, density, and grain size profiles. A DMRT model is needed to describe radiative transfer in a medium such as snow because the assumption of independent scattering used in classical radiative transfer theory (CRT) is not valid. Validation of the DMRT approach requires a relationship between measured snow grain size and the DMRT approximation of snow grain radius as spherical particles with a mean radius of the log-normal particle-size distribution. This relationship is very important for a better understanding of snow modelling and for practical applications. DMRT simulations were compared with observations of microwave brightnesses at 18.7, 36.5 and 89-GHz (V and H polarizations) collected on February-1 9-25, 2003. Observation angles ranged from 30\deg to 70\deg. Model inputs included measured snow parameters except mean grain size. The average snow temperature, fractional volume and depth were held constant, together with the ice and soil permittivities. The minimum and maximum measured mean grain sizes were used to test the capabilities of the DMRT to reproduce the brightnesses as upper and lower limits. The sensitivity to the largest and smallest measured grain size in the three classes of minimum, medium and maximum observed grain sizes was also investigated. DMRT particle sizes yielding a best-fit to the experimental data for each date were computed. Results show that the measured brightnesses fall within the range of simulated brightnesses using the smallest and largest measured grain size values. The DMRT best-fit radii are comparable to the average radii for the medium observed grain sizes.

Tedesco, Marco↗

Post-Pinatubo optical depth spectra vs. latitude and vortex structure: Airborne tracking sunphotometer measurements in AASE 2

In January and March 1992, DC-8-measured stratospheric particle optical depth spectra, tau(sub P)(lambda), peaked broadly at midvisible or longer wavelenghts. At mid-to-high northern latitudes outside the vortex, tau(sub p)(526 nm) above about 11 km was as large as 0.22 in both January and March, reflecting continued Pinatubo volcanic influence. In both months, in-vortex tau(sub p)(lambda) above 11 km was smaller than outside-vortex values by a factor of two or more, and in January a strong anticorrelation was observed between tau(sub p)(lambda) and HF column content (an indicator of vortex penetration). In late January at 18-20S, near the edge of the southern subtropical jet, tau(sub p)(526 nm) above 12 km was only about 0.07-0.09, with a flatter spectral shape than northern mid- to high-latitude measurements in both January and March. Occasional high-latitude vertical profiles indicate 6-11-km slab optical depths, Delta tau(sub p)(526 nm), of 0.05 to 0.1, which should be added to the above-11-km values to yield values above 6 km.

Russell, P. B.↗

Post-Pinatubo Optical Depth Spectra VS. Latitude and Vortex Structure: Airborne Tracking Sunphotometer Measurements in AASE 2

In January and March 1992, DC-8-measured stratospheric particle optical depth spectra, (tau)(sub p)(lambda), peaked broadly at midvisible or longer wavelengths. At mid-to-high northern latitudes outside the vortex, tau(sub p)(526 microns) above about 11 km was as large as 0.22 in both January and March, reflecting continued Pinatubo volcanic influence. In both months, in-vortex tau(sub p) above 11 km was smaller than outside-vortex values by a factor of two or more, and in January a strong anticorrelation was observed between tau(sub p)(lambda) and HF column content (an indicator of vortex penetration). In late January at 18-20S, near the edge of the southern subtropical jet, tau(sub p)(526 microns) above 12 km was only about 0.07- 0.09, with a flatter spectral shape than northern mid-to high-latitude measurements in both January and March. Occasional high-latitude vertical profiles indicate 6-1 km slab optical depths, delta(tau)(sub p)(526 micron), of 0.05 to 0.1, which should be added to the above-11-km values to yield values above 6 km.

Russell, P. B.↗

Post-Pinatubo Optical Depth Spectra vs Latitude and Vortex Structure: Airborne Tracking Sunphotometer Measurements in AASE 2

In January and March 1992, DC-8-measured stratospheric particle optical depth spectra, tau(sub p)(lambda), peaked broadly at midvisible or longer wavelengths. At mid-to-high northern latitudes outside the vortex, tau(sub p)(526 nm) nm) above about 11 km was as large as 0.22 in both January and March, reflecting continued Pinatubo volcanic influence. In both months, in-vortex tau(sub p)(lambda) above 11 km was smaller than outside-vortex values by a factor of two or more, and in January a strong anticorrelation was observed between tau(sub p)(lambda) and HF column content (an indicator of vortex penetration). In late January at 18-20S, near the edge of the southern subtropical jet, tau(sub p)(526 nm) above 12 km was only about 0.07-0.09, with a flatter spectral shape than northern mid- to high-latitude measurements in both January and March. Occasional high-latitude vertical profiles indicate 6-11-km slab optical depths, Delta tau(sub p)(526 nm), of 0.05 to 0.1, which should be added to the above-11-km values to yield values above 6 km.

Russell, P. B.↗

Topological reaction rate measurements related to scoffing

A ball-on-plate (both consisting of hardened M-50 steel) sliding elastohydrodynamic contact was run with trimethylolpropane triheptanoate (TMPTH) with and without tricresyl phosphate (TCP). The contact area of the plate was optically profiled with a phase-locked interference microscope (PLIM) both before and after exposure to alcoholic hydrochloric acid. As scuffing was approached, the profile within the contact region changed more rapidly after the acid treatment; after scuffing, it assumed a constant high value. A metallurgical phase found in the scuff mark was apparently responsible for the high reactivity. The microscopic profile changes (sensitivity, + or - 3 nm (+ or - A) in depth) involved primarily the small asperities (radius, 3 microns); the larger ones were unaffected. Soaking the steel in TCP smoothed the fine structure of the surface profile but increased its reactivity toward alcoholic hydrochloric acid before sliding was started. Thus it would appear that PLIM examination could be used for screening potentially scuff-resistant materials.

Lauer, J. L.↗

Topological reaction rate measurements related to scuffing

A ball-on-plate (both consisting of hardened M-50 steel) sliding elastohydrodynamic contact was run with trimethylolpropane triheptanoate (TMPTH) with and without tricresyl phosphate (TCP). The contact area of the plate was optically profiled with a phase-locked interference microscope (PLIM) both before and after exposure to alcoholic hydrochloric acid. As scuffing was approached, the profile within the contact region changed more rapidly after the acid treatment; after scuffing, it assumed a constant high value. A metallurgical phase found in the scuff mark was apparently responsible for the high reactivity. The microscopic profile changes (sensitivity, + or - 3 nm (+ or - A) in depth) involved primarily the small asperities (radius, 3 microns); the larger ones were unaffected. Soaking the steel in TCP smoothed the fine structure of the surface profile but increased its reactivity toward alcoholic hydrochloric acid before sliding was started. Thus it would appear that PLIM examination could be used for screening potentially scuff-resistant materials.

Lauer, J. L.↗

Molecular indicators for palaeoenvironmental change in a Messinian evaporitic sequence (Vena del Gesso, Italy). II: High-resolution variations in abundances and 13C contents of free and sulphur-bound carbon skeletons in a single marl bed

The extractable organic matter of 10 immature samples from a marl bed of one evaporitic cycle of the Vena del Gesso sediments (Gessoso-solfifera Fm., Messinian, Italy) was analyzed quantitatively for free hydrocarbons and organic sulphur compounds. Nickel boride was used as a desulphurizing agent to recover sulphur-bound lipids from the polar and asphaltene fractions. Carbon isotopic compositions (delta vs PDB) of free hydrocarbons and of S-bound hydrocarbons were also measured. Relationships between these carbon skeletons, precursor biolipids, and the organisms producing them could then be examined. Concentrations of S-bound lipids and free hydrocarbons and their delta values were plotted vs depth in the marl bed and the profiles were interpreted in terms of variations in source organisms, 13 C contents of the carbon source, and environmentally induced changes in isotopic fractionation. The overall range of delta values measured was 24.7%, from -11.6% for a component derived from green sulphur bacteria (Chlorobiaceae) to -36.3% for a lipid derived from purple sulphur bacteria (Chromatiaceae). Deconvolution of mixtures of components deriving from multiple sources (green and purple sulphur bacteria, coccolithophorids, microalgae and higher plants) was sometimes possible because both quantitative and isotopic data were available and because either the free or S-bound pool sometimes appeared to contain material from a single source. Several free n-alkanes and S-bound lipids appeared to be specific products of upper-water-column primary producers (i.e. algae and cyanobacteria). Others derived from anaerobic photoautotrophs and from heterotrophic protozoa (ciliates), which apparently fed partly on Chlorobiaceae. Four groups of n-alkanes produced by algae or cyanobacteria were also recognized based on systematic variations of abundance and isotopic composition with depth. For hydrocarbons probably derived from microalgae, isotopic variations are well correlated with those of total organic carbon. A resistant aliphatic biomacromolecule produced by microalgae is, therefore, probably an important component of the kerogen. These variations reflect changes in the depositional environment and early diagenetic transformations. Changes in the concentrations of S-bound lipids induced by variations in conditions favourable for sulphurization were discriminated from those related to variations in primary producer assemblages. The water column of the lagoonal basin was stratified and photic zone anoxia occurred during the early and middle stages of marl deposition. During the last stage of the marl deposition the stratification collapsed due to a significant shallowing of the water column. Contributions from anaerobic photoautotrophs were apparently associated with variations in depth of the chemocline.

Non-NASA Center↗

Vertical Structure of Ice Cloud Layers From CloudSat and CALIPSO Measurements and Comparison to NICAM Simulations

The shape of the vertical profile of ice cloud layers is examined using 4 months of CloudSat and Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) global measurements taken on January, April, July, and October 2007. Ice clouds are selected using temperature profiles when the cloud base is located above the 253K temperature level. The obtained ice water content (IWC), effective radius, or extinction coefficient profiles are normalized by their layer mean values and are expressed in the normalized vertical coordinate, which is defined as 0 and 1 at the cloud base and top heights, respectively. Both CloudSat and CALIPSO observations show that the maximum in the IWC and extinction profiles shifts toward the cloud bottom, as the cloud depth increases. In addition, clouds with a base reaching the surface in a high-latitude region show that the maximum peak of the IWC and extinction profiles occurs near the surface, which is presumably due to snow precipitation. CloudSat measurements show that the seasonal difference in normalized cloud vertical profiles is not significant, whereas the normalized cloud vertical profile significantly varies depending on the cloud type and the presence of precipitation. It is further examined if the 7 day Nonhydrostatic Icosahedral Atmospheric Model (NICAM) simulation results from 25 December 2006 to 1 January 2007 generate similar cloud profile shapes. NICAM IWC profiles also show maximum peaks near the cloud bottom for thick cloud layers and maximum peaks at the cloud bottom for low-level clouds near the surface. It is inferred that oversized snow particles in the NICAM cloud scheme produce a more vertically inhomogeneous IWC profile than observations due to quick sedimentation.

Ham, Seung-Hee↗

Mud Volcanoes - Analogs to Martian Cones and Domes (by the Thousands!)

Mud volcanoes are mounds formed by low temperature slurries of gas, liquid, sediments and rock that erupt to the surface from depths of meters to kilometers. They are common on Earth, with estimates of thousands onshore and tens of thousands offshore. Mud volcanoes occur in basins with rapidly-deposited accumulations of fine-grained sediments. Such settings are ideal for concentration and preservation of organic materials, and mud volcanoes typically occur in sedimentary basins that are rich in organic biosignatures. Domes and cones, cited as possible mud volcanoes by previous authors, are common on the northern plains of Mars. Our analysis of selected regions in southern Acidalia Planitia has revealed over 18,000 such features, and we estimate that more than 40,000 occur across the area. These domes and cones strongly resemble terrestrial mud volcanoes in size, shape, morphology, associated flow structures and geologic setting. Geologic and mineralogic arguments rule out alternative formation mechanisms involving lava, ice and impacts. We are studying terrestrial mud volcanoes from onshore and submarine locations. The largest concentration of onshore features is in Azerbaijan, near the western edge of the Caspian Sea. These features are typically hundreds of meters to several kilometers in diameter, and tens to hundreds of meters in height. Satellite images show spatial densities of 20 to 40 eruptive centers per 1000 square km. Many of the features remain active, and fresh mud flows as long as several kilometers are common. A large field of submarine mud volcanoes is located in the Gulf of Cadiz, off the Atlantic coasts of Morocco and Spain. High-resolution sonar bathymetry reveals numerous km-scale mud volcanoes, hundreds of meters in height. Seismic profiles demonstrate that the mud erupts from depths of several hundred meters. These submarine mud volcanoes are the closest morphologic analogs yet found to the features in Acidalia Planitia. We are also conducting laboratory analyses of surface samples collected from mud volcanoes in Azerbaijan, Taiwan and Japan. X-ray diffraction, visible / near infrared reflectance spectroscopy and Raman spectroscopy show that the samples are dominated by mixed-layer smectite clays, along with quartz, calcite and pyrite. Thin section analysis by optical and scanning electron microscopy confirms the mineral identifications. These samples also contain chemical and morphological biosignatures, including common microfossils, with evidence of partial replacement by pyrite. The bulk samples contain approximately 1 wt% total organic carbon and 0.4 mg / gm volatile hydrocarbons. The thousands of features in Acidalia Planitia cited as analogous to terrestrial mud volcanoes clearly represent an important element in the sedimentary record of Mars. Their location, in the distal depocenter for massive Hesperian-age floods, suggests that they contain fine-grained sediments from a large catchment area in the martian highlands. We have proposed these features as a new class of exploration target that can provide access to minimally-altered material from significant depth. By analogy to terrestrial mud volcanoes, these features may also be excellent sites for the sampling martian organics and subsurface microbial life, if such exist or ever existed.

Allen, Carlton C.↗

Using Polarimetric SAR Data to Infer Soil Moisture from Surfaces with Varying Subsurface Moisture Profiles

A time-series approach is used to estimate the moisture content-based on polarimetric SAR data. It is found that under the assumption of constant soil moisture, empirically observed relationships between radar backscatter and moisture are only half as sensitive to moisture as compared to actual radar data. A numerical finite element method is used to calculate the radar backscatter for rough soils with arbitrarily varying soil moisture as a function of depth. Several instance of drying and wetting moisture profiles are considered and the radar backscatter is calculated in each case. Radar backscatter is found to crucially depend on the soil moisture variation in the top half wavelength of soil.

subsurface sensing↗

Evaluation of Variable-Depth Liner Configurations for Increased Broadband Noise Reduction

This paper explores the effects of variable-depth geometry on the amount of noise reduction that can be achieved with acoustic liners. Results for two variable-depth liners tested in the NASA Langley Grazing Flow Impedance Tube demonstrate significant broadband noise reduction. An impedance prediction model is combined with two propagation codes to predict corresponding sound pressure level profiles over the length of the Grazing Flow Impedance Tube. The comparison of measured and predicted sound pressure level profiles is sufficiently favorable to support use of these tools for investigation of a number of proposed variable-depth liner configurations. Predicted sound pressure level profiles for these proposed configurations reveal a number of interesting features. Liner orientation clearly affects the sound pressure level profile over the length of the liner, but the effect on the total attenuation is less pronounced. The axial extent of attenuation at an individual frequency continues well beyond the location where the liner depth is optimally tuned to the quarter-wavelength of that frequency. The sound pressure level profile is significantly affected by the way in which variable-depth segments are distributed over the length of the liner. Given the broadband noise reduction capability for these liner configurations, further development of impedance prediction models and propagation codes specifically tuned for this application is warranted.

Jones, M. G.↗

The Impact of Neglecting Ice Phase on Cloud Optical Depth Retrievals from AERONET Cloud Mode Observations

Clouds present many challenges to climate modelling. To develop and verify the parameterisations needed to allow climate models to represent cloud structure and processes, there is a need for high-quality observations of cloud optical depth from locations around the world. Retrievals of cloud optical depth are obtainable from radiances measured by Aerosol Robotic Network (AERONET) radiometers in “cloud mode” using a two-wavelength retrieval method. However, the method is unable to detect cloud phase, and hence assumes that all of the cloud in a profile is liquid. This assumption has the potential to introduce errors into long term statistics of retrieved optical depth for clouds that also contain ice. Using a set of idealized cloud profiles we find that, for optical depths above 20, the fractional error in retrieved optical depth is a linear function of the fraction of the optical depth that is due to the presence of ice cloud (“ice fraction”). Clouds that are entirely ice have positive errors with magnitudes of the order of 55% to 70 %. We derive a simple linear equation that can be used as a correction at AERONET sites where ice fraction can be independently estimated. Using this linear equation, we estimate the magnitude of the error for a set of cloud profiles from five sites of the Atmospheric Radiation Measurement programme. The dataset contains separate retrievals of ice and liquid retrievals; hence ice fraction can be estimated. The magnitude of the error at each location was related to the relative frequencies of occurrence in thick frontal cloud at the mid-latitude sites and of deep convection at the tropical sites – that is, of deep cloud containing both ice and liquid particles. The long-term mean optical depth error at the five locations spans the range 2– 4, which we show to be small enough to allow calculation of top-of-atmosphere flux to within 10% and surface flux to about 15 %.

Shonk, Jonathan K. P.↗

Local lunar topography from the Apollo 17 ALSE radar imagery and altimetry

The Apollo 17 ALSE (Apollo Lunar Sounder Experiment) VHF radar provided imagery and continuous profiling data around the moon during two revolutions. The imagery data are used to derive depth and diameter measurements of small craters (diameters less than 30 km). The profiling data are used to study the topography of a few large craters: the bulged floors in Hevelius, Neper, and Aitken; central peaks in Neper and Buisson; and the depressed floor of Maraldi. The same data provided accurate (better than 25 m) profiles of Mare Crisium and Mare Serenitatis.

Elachi, C.↗

Mass ejection from the O4f star Zeta Puppis

Profiles of P Cygni lines and displaced absorption lines observed in high-resolution Copernicus UV scans of Zeta Pup from 907 to 1738 A are compared with profile calculations to derive an optical-depth scale of the lines as a function of height or velocity in the expanding envelope. The degrees of ionization of the elements C, N, O, Si, and S under equilibrium conditions at electron temperatures of 20,000 to 1 million K, radiation temperatures of 20,000 to 50,000 K, and electron number densities of 100 million to 1 trillion per cu cm are computed with a dilution factor of 0.1, taking into account collisional ionization by electrons, radiative ionization from the ground state, radiative recombination, and dielectric recombination. Observed and predicted relative ionization fractions are then compared to determine the electron and radiation temperatures. Crude and refined estimates of the mass-loss rate and velocity law are made, and radiative acceleration in the expanding envelope is analyzed. The derived model for Zeta Pup is found to have a mass-loss rate of about 7.2 millionths of a solar mass per year, a wind velocity that increases slowly outward and reaches 700 km/s about 28 solar masses, and a nearly isothermal envelope with an electron temperature of approximately 200,000 K.

Lamers, H. J. G. L. M.↗

Mn-53 in the Apollo 15 and 16 drill stems - Evidence for surface mixing

The activity of cosmic ray produced Mn-53 has been measured in a series of samples from the upper 10 cm of the Apollo 15 and 16 drill stems. The activity profiles for both cores indicate disturbance to depths of about 3 g/sq cm within the last 6 m.y. In at least one case (Apollo 16) the soil has been gardened to at least 14 g/sq cm within the last 10 m.y., and material from the upper less than 2 g/sq cm has been buried to 14 g/sq cm by this gardening. The results for the Apollo 15 core are compatible with a wide variety of possible histories including loss or gain of material.

Nishiizumi, K.↗

Curves of growth for van der Waals broadened spectral lines

Curves of growth are evaluated for a spectral line broadened by the van der Waals interactions during collisions. The growth of the equivalent widths of such lines is shown to be dependent on the product of the perturber density and the 6/10 power of the van der Waals potential coefficient. When the parameter is small, the widths grow as the 1/2 power of the optical depth as they do for the Voigt profile: but when the parameter is large, they grow as 2/3 power and, hence, faster than the Voigt profile. An approximate analytical expression for the computed growth characteristics is given.

Park, C.↗