Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “defect chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Arylammonium-Assisted Reduction of the Open-Circuit Voltage Deficit in Wide-Bandgap Perovskite Solar Cells: The Role of Suppressed Ion Migration

Surface treatment using large alkyl/aryl ammonium cations has demonstrated reduced open-circuit voltage (V OC ) deficits in perovskite solar cells (PSCs), but the origin of the improvements has been vaguely attributed to defect passivation. Here, we combine the microscopic probing of the local electrical properties, thermal admittance spectroscopic analysis, and first principles calculations to elucidate the critical role of arylammonium interface layers on suppressing the ion migration in wide-bandgap (WBG) PSCs. Our results reveal that arylammonium surface treatment using phenethylammonium iodide increases the activation energy barrier for ion migration on the surface, which suppresses the accumulation of charge defects at surface and grain boundaries (GBs), leading to reduced dark saturation current density in WBG PSCs. Furthermore, with device optimization, our champion 1.73-eV PSC delivers a power conversion efficiency of 19.07% with a V OC of 1.25 V, achieving a V OC -deficit of 0.48 V.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The Radical Atom: Mechanosynthetic 3D Printing of an Atomically Precise SPM Tip

This research effort sought to overcome current limitations in scanning probe-based atomic manipulation to enable atomically precise manufacturing (APM). Previous theoretical and experimental works on atom by atom and molecule by molecule fabrication of precise structures are limited to essentially to two-dimensions. APM will enable a paradigm shift in 21st century manufacturing practices in which every single atom in a electronic chip, device or machine can be placed in an exact and predefined position in three-dimensions. By providing a general method for generating reproducible SPM tip structure, this project will drive forward the entire field of atomically precise scanning probe microscopy, opening the door to positional control of nearly arbitrary covalent chemistry. Such control could, for example, be used in applications such as novel 2.5 or 3D microchip fabrication. The creation of a unique manufacturing method through APM has the potential to impact technologies at the theoretical limits of performance, weight, and utility including: solid-state quantum and spintronic computing systems, high efficiency optical antenna, solar power systems, defect engineered materials and extremely efficient catalysts. Although this experiment focused on pick-and-place non-scalable APM, the better understanding of the chemistry is crucial to the eventual goal of scalable APM. To place individual atoms into a specified location is a seminal aspiration of researchers and engineers in the many fields and may have early premium applications in medical devices and microelectronics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

First-Principles Study on the Role of Cu and Cl-Based Dopants in NiO

Utilization of wide band gap oxide-based materials in thin-film solar energy technologies has increased in recent years. Among the numerous candidate oxide materials, NiO has shown many desirable optoelectronic properties that are applicable to thin-film PV technologies such as cadmium telluride PV. However, one critical factor requiring further investigation is the p-type doping behavior of NiO, specifically when the cadmium telluride solar cell undergoes conventional processes such as copper doping and chlorine-based activation treatment. The previous literature has shown a large degree of variability in hole concentrations in NiO when copper is used as the primary dopant. This study uses first-principles computational modeling based on density functional theory coupled with defect equilibria calculations to quantitatively explore the role of copper and chlorine-based extrinsic dopants in the p-type doping activity of NiO. The study reveals the importance of extrinsic dopants and their binding interactions with nickel vacancies to effectively p-dope NiO. It is suggested that both the formation of V Ni + Cu Ni and V Ni + Cl O defect pairs under a supersaturated state of NiO are potential mechanisms for increasing hole densities. On the other hand, the production of 2Cu Ni severely limits the effectiveness of p-doping in NiO, even in the presence of the aforementioned defect pairs. Furthermore, the study provides a guideline for experimentalists interested in using copper or chlorine species to understand how to controllably p-dope NiO during thin-film synthesis.

chlorine↗
DOE OSTI2025

Influence of surface chemistry on Li nucleation energetics on graphene-based surfaces

Lithium metal is a promising high-capacity anode material for solid-state batteries, but it typically suffers from poor cyclability. Carbon scaffold hosts have the potential to improve this performance due to their high electronic conductivity and large surface area, which facilitates lithium-ion adsorption and desorption. Scaffold surface chemistry is known to significantly influence performance outcomes, but the details of these interactions are not fully understood. Here, this study employs first-principles simulations to explore lithium transport and nucleation on graphene anodes with various surface chemistries. Using enhanced sampling techniques, ab initio molecular dynamics, and density functional theory calculations, we find that although surface chemistry has a minimal impact on lithium interfacial transport, it influences surface nucleation significantly. Both heteroatom dopants and intrinsic defects lower the nucleation barrier, creating a more favorable environment for lithium nucleation compared to pristine graphene. In addition, our results reveal a complex interplay between surface lithium concentration, lithium transport, and nucleation kinetics. These findings highlight the potential of surface modifications to precisely control nucleation processes on carbon-based anodes and provide design guidance for reducing dendrite formation and improving the cycle life of solid-state batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The structures of ordered defects in thiocyanate analogues of Prussian Blue

We report the structures of six new divalent transition metal hexathiocyanatobismuthate frameworks with the generic formula $\Big\{ M[Bi(SCN)_6]_\frac{2+x}{3} \Big\}$ $\{guest\}^{x+}$, M = Mn, Co, Ni and Zn. These frameworks are defective analogues of the perovskite-derived trivalent transition metal hexathiocyanatobismuthates M III [Bi(SCN) 6 ]. The defects in these new thiocyanate frameworks order and produce complex superstructures due to the low symmetry of the parent structure, in contrast to the related and more well-studied cyanide Prussian Blue analogues. Despite the close similarities in the chemistries of these four transition metal cations, we find that each framework contains a different mechanism for accommodating the lowered transition metal charge, making use of some combination of Bi(SCN) 6 3- vacancies, M Bi antisite defects, water substitution for thiocyanate, adventitious extra-framework cations and reduced metal coordination number. These materials provide an unusually clear view of defects in molecular framework materials and their variety suggests that similar richness may be waiting to be uncovered in other hybrid perovskite frameworks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

CO adsorption on MnO(100): Experimental benchmarks compared to DFT

In this study, CO adsorption on the MnO(100) surface was studied using temperature programmed desorption (TPD) and density functional theory (DFT). TPD results show that CO is weakly-bound on MnO(100), with an experimental adsorption energy of -35.6 ± 2.1 kJ/mol at terrace sites in the low coverage limit. PBE simulations suggest that CO adsorption causes an implausible (2 × 2) surface reconstruction. PBE+U simulations show no signs of surface reconstruction, and provide an accurate estimate of the adsorption energy (-36.4 kJ/mol) when combined with the DFT-D3 method with Becke-Jonson damping to correct for van der Waals interactions. This simulation also shows that CO adsorbs C-down onto the Mn 2+ terrace site in a tilted geometry, which is also observed experimentally and computationally on the similarly-structured NiO(100) transition metal oxide surface. TPD results for large doses show a plateauing of the coverage at about 0.4 monolayers of CO at 85 K, with a defect coverage equivalent to 0.08 monolayers. Adsorption associated with defect sites is indicated by a high-temperature desorption tail which is not satisfactorily explained by DFT simulations of simple step or oxygen vacancy defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Evolution of lithium ordering with (de)-lithiation in β-LiVOPO 4 : insights through solid-state NMR and first principles DFT calculations

The lithium-ion battery cathode material β-VOPO 4 is capable of intercalating more than one Li ion per transition metal ion due to the accessibility of both the V 5+ /V 4+ and V 4+ /V 3+ redox couples at ~4.5 V and ~2.3 V vs. Li, respectively, giving a theoretical capacity greater than ~300 mA h g -1 . The ability to perform full and reversible two Li-ion intercalation in this material, however, has been a matter of debate and the poor crystallinity of the fully lithiated phase has thus far precluded its complete structural characterisation by conventional diffraction-based methods. In this work, 7 Li and 31 P NMR spectroscopy, in combination with first principles DFT calculations, indicate that chemical lithiation results in a single phase β-Li 2 VOPO 4 exhibiting a complex Li ordering scheme with lithium ions occupying multiple disordered environments. 2D NMR 7 Li correlation experiments were used to deduce the most likely Li ordering for the β-Li 2 VOPO 4 phase from amongst several DFT optimised structures. In contrast, electrochemically lithiated β-Li 2- x VOPO 4 discharged to 1.6 V exhibits, in addition to β-Li 2 VOPO 4 , a β-Li 1.5 VOPO 4 phase. Additionally, the existence of β-Li 1.5 VOPO 4 is not reflected in the flat galvanostatic charge and discharge curves nor is evident from diffraction-based methods due to the very close structural similarity between the β-Li 1.5 VOPO 4 phase and β-Li 2 VOPO 4 phases. We demonstrate that solid state NMR spectroscopy, in combination with DFT results, provides a powerful tool for identifying intermediate states formed during charge/discharge of these complex phosphates as these phases can be distinguished from the end member phases primarily by the nature of the lithium ordering.

25 ENERGY STORAGE↗
DOE OSTI2020

Role of shell composition and morphology in achieving single-emitter photostability for green-emitting “giant” quantum dots

The use of the varied chemical reactivity of precursors to drive the production of a desired nanocrystal architecture has become a common method to grow thick-shell graded alloy quantum dots (QDs) with robust optical properties. Conclusions on their behavior assume the ideal chemical gradation and uniform particle composition. In this work, advanced analytical electron microscopy (high-resolution scanning transmission electron microscopy coupled with energy dispersive spectroscopy) is used to confirm the nature and extent of compositional gradation and these data are compared with performance behavior obtained from single-nanocrystal spectroscopy to elucidate structure, chemical-composition, and optical-property correlations. In particular, the evolution of the chemical structure and single-nanocrystal luminescence was determined for a time-series of graded-alloy “CdZnSSe/ZnS” core/shell QDs prepared in a single-pot reaction. In a separate step, thick (~6 monolayers) to giant (>14 monolayers) shells of ZnS were added to the alloyed QDs via a successive ionic layer adsorption and reaction (SILAR) process, and the impact of this shell on the optical performance was also assessed. By determining the degree of alloying for each component element on a per-particle basis, we observe that the actual product from the single-pot reaction is less “graded” in Cd and more so in Se than anticipated, with Se extending throughout the structure. The latter suggests much slower Se reaction kinetics than expected or an ability of Se to diffuse away from the initially nucleated core. It was also found that the subsequent growth of thick phase-pure ZnS shells by the SILAR method was required to significantly reduce blinking and photobleaching. However, correlated single-nanocrystal optical characterization and electron microscopy further revealed that these beneficial properties are only achieved if the thick ZnS shell is complete and without large lattice discontinuities. Thus, we identify the necessary structural design features that are required for ideal light emission properties in these green-visible emitting QDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

SU(3) Topology of Magnon-Phonon Hybridization in 2D Antiferromagnets

Magnon-phonon hybrid excitations are studied theoretically in a two-dimensional antiferromagnet with an easy axis normal to the plane. In this work, we show that two magnon bands and one phonon band are intertwined by the magnetoelastic coupling through a nontrivial SU(3) topology, which can be intuitively perceived by identifying a skyrmion structure in the momentum space. Our results are insensitive to lattice details and generally applicable to two-dimensional antiferromagnets. We show this by developing a continuum theory as the long-wavelength approximation to the tight-binding model. The theoretical results can be probed by measuring the thermal Hall conductance as a function of the temperature and the magnetic field. We envision that the magnetoelastic coupling in antiferromagnets can be a promising venue in search of various topological excitations, which cannot be found in magnetic or elastic models alone.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1984

Plasma variables and tribological properties of coatings in low pressure (0.1 - 10.0 torr) plasma systems

A detailed treatment is presented of the dialog known as plasma surface interactions (PSI) with respect to the coating process and its tribological behavior. Adsorption, morphological changes, defect formation, sputtering, chemical etching, and secondary electron emission are all discussed as promoting and enhancing the surface chemistry, thus influencing the tribological properties of the deposited flux. Phenomenological correlations of rate of deposition, flux composition, microhardness, and wear with the plasma layer variables give an insight to the formation of chemical bonding between the deposited flux and the substrate surface.

Avni, R.↗
DOE OSTI2023

Correlating chemistry and mass transport in sustainable iron production

Steelmaking contributes 8% to the total CO 2 emissions globally, primarily due to coal-based iron ore reduction. Clean hydrogen-based ironmaking has variable performance because the dominant gas–solid reduction mechanism is set by the defects and pores inside the mm- to nm-sized oxide particles that change significantly as the reaction progresses. While these governing dynamics are essential to establish continuous flow of iron and its ores through reactors, the direct link between agglomeration and chemistry is still contested due to missing measurements. In this work, we directly measure the connection between chemistry and agglomeration in the smallest iron oxides relevant to magnetite ores. Using synthesized spherical 10-nm magnetite particles reacting in H 2 , we resolve the formation and consumption of wüstite (Fe 1-x O)—the step most commonly attributed to whiskering. Using X-ray diffraction, we resolve crystallographic anisotropy in the rate of the initial reaction. Complementary imaging demonstrated how the particles self-assemble, subsequently react, and grow into elongated “whisker” structures. Our insights into how morphologically uniform iron oxide particles react and agglomerate in H 2 reduction enable future size-dependent models to effectively describe the multiscale aspects of iron ore reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High-Temperature Nucleation of GaP on V-Grooved Si

The use of nanopatterned {111}-faceted v-grooves has recently shown promise for growing high-quality III–V material on Si. Here, we study the effect of reactor conditions and surface pretreatments on the nucleation of GaP on v-grooved Si in a high-temperature regime, which offers the promise of a defect-free GaP/Si interface favorable for Si passivation and dislocation glide in the GaP. X-ray photoelectron spectroscopy was used to understand the Si surface chemistry prior to nucleation, and transmission electron microscopy was used to probe material quality of the nuclei. Temperature and V/III ratio were found to control the facet selectivity of nucleation. We demonstrate a condition of high temperature and high V–III ratio that leads to uniform nucleation at the bottom of the trenches, with initial material free of nucleation-related interfacial defects. This optimized condition was then shown to coalesce into a thin film after additional growth.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tutorial: Defects in topological semimetals

Three-dimensional topological semimetals are a class of electronic materials in which their bulk and surface states contain linear band touching nodes near the Fermi level. Like semiconductors, their properties will be affected by point and extended defects in their crystal structures, although the extent to which defects and disorders influence topological semimetals may differ in key ways due to their unique electronic structures. In this Tutorial, we provide an overview of the defects in topological semimetals, covering both computational and experimental methods for exploring defect-property relationships. We also include a discussion on open questions that still need to be explored further.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Scalable Bottom-Up Synthesis of Nanoporous Hexagonal Boron Nitride ( h -BN) for Large-Area Atomically Thin Ceramic Membranes

Nanopores embedded within monolayer hexagonal boron nitride (h-BN) offer possibilities of creating atomically thin ceramic membranes with unique combinations of high permeance (atomic thinness), high selectivity (via molecular sieving), increased thermal stability, and superior chemical resistance. However, fabricating size-selective nanopores in monolayer h-BN via scalable top-down processes remains nontrivial due to its chemical inertness, and characterizing nanopore size distribution over a large area remains extremely challenging. Here, we demonstrate a facile and scalable approach of exploiting the chemical vapor deposition (CVD) process temperature to enable direct incorporation of subnanometer/nanoscale pores into the monolayer h-BN lattice, in combination with manufacturing compatible polymer casting to fabricate centimeter-scale nanoporous atomically thin ceramic membranes. We leverage diffusive transport of analytes including size-selective Ficoll sieving to characterize subnanometer-scale and nanoscale defects that manifest as pores in centimeter-scale h-BN membranes, overcoming previous limitations in large-area characterization of nanoscale defects in h-BN. Our approach opens a new frontier to advance atomically thin membranes to 2D ceramic materials, such as h-BN via facile and direct formation of nanopores, for size-selective separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRSDate not supplied

Implementation of Active Sites in DSMC to Capture Pitting of Oxidizing Carbon Materials

In this work we demonstrate a newly developed capability to capture pitting of carbon fibers in DSMC simulations, specifically using the Stochastic PArallel Rarefied-gas Time-accurate Analyzer (SPARTA) code. State-of-the-art reactive surface models in DSMC compute collision dependent carbon consumption rates (usually through desorption of CO) based on a set of surface reactions that has been derived from molecular beam experiments. The reactivity on each carbon surface element is constant in those models, such that the carbon surface recedes uniformly as a result of ablation. However, it is well known that in reality the carbon surface has locally different reaction rates due to the presence of defects at the atomic scale. These defective sites have a much higher reactivity than the average sites (2-3 orders of magnitude) and are first to react during ablation leading to its removal. This causes all the neighboring atoms to be defective and increase their reactivity, thus leading to the localized carbon removal around these ”active” sites. In this manner, these highly reactive defective sites serve as nucleation sites for the formation and growth of etch pits with potentially detrimental effects on the structural integrity. Recently a detailed surface chemistry framework was developed in SPARTA, capable of incorporating various reaction mechanisms such as adsorption, desorption, Eley-Rideal (ER) and Langmuir-Hinshelwood (LH) mechanisms. Within this framework, we have implemented the capability of a single surface having multiple site sets with different reactivities. Using this feature, we can simulate the presence of active sites on carbon surfaces, whose reactivity is much greater than an average site as a result of defects. We have implemented the active site fraction as a property of surface elements within SPARTA, which is directly proportional to the local reactivity of each surface element. By introducing an initial distribution of the active site fraction across the carbon surface, and propagating it in a manner that mimics the evolution of real reacting carbon surfaces, we are able to capture the formation and growth of etch pits as a result of surface consumption reactions such as oxidation.

DSMC↗
NASA NTRSDate not supplied

Implementation of active sites to capture pitting of oxidizing carbon materials in DSMC.

In this work we demonstrate a newly developed capability to capture pitting of carbon fibers in DSMC simulations, specifically using the Stochastic PArallel Rarefied-gas Time-accurate Analyzer (SPARTA) code [1]. State-of-the-art reactive surface models in DSMC compute collision dependent carbon consumption rates (usually through desorption of CO) based on a set of surface reactions that has been derived from molecular beam experiments [2]. The reactivity on each carbon surface element is constant in those models, such that the carbon surface recedes uniformly as a result of ablation. However, it is well known that in reality the carbon surface has locally different reaction rates due to the presence of defects at the atomic scale [3]. These defective sites have a much higher reactivity than the average sites (2-3 orders of magnitude) and are first to react during ablation leading to its removal. This causes all the neighboring atoms to be defective and increase their reactivity, thus leading to the localized carbon removal around these ”active” sites (as shown in Fig. 1). In this manner, these highly reactive defective sites serve as nucleation sites for the formation and growth of etch pits with potentially detrimental effects on the structural integrity. Recently a detailed surface chemistry framework was developed in SPARTA, capable of incorporating various reaction mechanisms such as adsorption, desorption, Eley-Rideal (ER) and Langmuir-Hinshelwood (LH) mechanisms [4]. Within this framework, we have implemented the capability of a single surface having multiple site sets with different reactivities. Using this feature, we can simulate the presence of active sites on carbon surfaces, whose reactivity is much greater than an average site as a result of defects. We have implemented the active site fraction as a property of surface elements within SPARTA, which is directly proportional to the local reactivity of each surface element. By introducing an initial distribution of the active site fraction across the carbon surface, and propagating it in a manner that mimics the evolution of real reacting carbon surfaces, we are able to capture the formation and growth of etch pits as a result of surface consumption reactions such as oxidation.

DSMC↗