Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuum modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

The mathematical modeling of rapid solidification processing

The detailed formulation of and the results obtained from a continuum mechanics-based mathematical model of the planar flow melt spinning (PFMS) rapid solidification system are presented and discussed. The numerical algorithm proposed is capable of computing the cooling and freezing rates as well as the fluid flow and capillary phenomena which take place inside the molten puddle formed in the PFMS process. The FORTRAN listings of some of the most useful computer programs and a collection of appendices describing the basic equations used for the modeling are included.

Gutierrez-Miravete, E.↗

Literature Reviews on Modeling Internal Geometry of Textile Composites and Rate-Independent Continuum Damage

Textile composite materials have good potential for constructing composite structures where the effects of three-dimensional stresses are critical or geometric complexity is a manufacturing concern. There is a recent interest in advancing competence within Langley Research Center for modeling the degradation of mechanical properties of textile composites. In an initial effort, two critical areas are identified to pursue: (1) Construction of internal geometry of textile composites, and (2) Rate-independent continuum damage mechanics. This report documents reviews on the two subjects. Various reviewed approaches are categorized, their assumptions, methods, and progress are briefed, and then critiques are presented. Each review ends with recommended research.

Su-Yuen, Hsu↗

The effects of the diffuse radiation fields due to multiple scattering and thermal reradiation by dust on the dynamics and thermodynamics of a dusty cometary atmosphere

A self-consistent model of a dirty, clathrate cometary nucleus is extended to account for diffuse radiation fields caused by multiple scattering and thermal reradiation of the solar continuum by dust. The model is configured to fit conditions expected for the various spacecraft which will encounter Halley's comet at 0.89 AU. The atmosphere is assumed a chemically reactive dust-gas mixture in quasi-steady spherically symmetric expansion. The effect of electron-neutral ion collisions is accounted for, along with rate constants of the various species of clathrate ice particles and radiative transfer of the solar input in the UV, visible and near-IR intervals. The opacity of the circumnuclear dust is projected to be an order of magnitude greater than previous estimates, which severely impacts the potential visibility of the nucleus to the cameras of the flyby satellites.

Marconi, M. L.↗

500-3200 A observations of the interacting binary stars V356 Sgr and Beta Lyr

Results on VG356 Sgr and Beta Lyr are presented from the Voyager UV spectrometers and the IUE. The observations of V356 Sgr cover two eclipses in which the total strength of the UV emission lines were invariant. At wavelengths shorter than 1600 A, an uneclipsed UV continuum was found. A model for the origin of the circumstellar matter in V356 Sgr is given. The UV observations of Beta Lyr show a strong far-UV continuum down to 912 A. The spectral shape fo the far-UV continuum closely resembles that of a UX Uma-type cataclysmic variable. Analysis of the Beta Lyr data indicates that the central object is small, with a radius on the order of 1 solar radius or less.

Polidan, R. S.↗

GRIS instrument continuum results from SN1987A

Results on the continuum emission from SN1987A from two balloon flights of gamma-ray imaging spectrometer over Alice Springs, Australia, in the spring and fall of 1988 are presented. The durations of the two observations were 11.2 and 11.7 hours, respectively. The measured continuum spectra (95-2560 keV for the spring and 55-2560 keV for the fall) are consistent with Compton scattering of the Co-56 decay lines. The 10HMM model agrees well with continuum data in the energy dependence of the continuum both in the slope of the spectra and the step increases below the 2599, 1238, and 847 keV Co-56 decay lines.

Barthelmy, S.↗

Porous Media Approach for Modeling Closed Cell Foam

In order to minimize boil off of the liquid oxygen and liquid hydrogen and to prevent the formation of ice on its exterior surface, the Space Shuttle External Tank (ET) is insulated using various low-density, closed-cell polymeric foams. Improved analysis methods for these foam materials are needed to predict the foam structural response and to help identify the foam fracture behavior in order to help minimize foam shedding occurrences. This presentation describes a continuum based approach to modeling the foam thermo-mechanical behavior that accounts for the cellular nature of the material and explicitly addresses the effect of the internal cell gas pressure. A porous media approach is implemented in a finite element frame work to model the mechanical behavior of the closed cell foam. The ABAQUS general purpose finite element program is used to simulate the continuum behavior of the foam. The soil mechanics element is implemented to account for the cell internal pressure and its effect on the stress and strain fields. The pressure variation inside the closed cells is calculated using the ideal gas laws. The soil mechanics element is compatible with an orthotropic materials model to capture the different behavior between the rise and in-plane directions of the foam. The porous media approach is applied to model the foam thermal strain and calculate the foam effective coefficient of thermal expansion. The calculated foam coefficients of thermal expansion were able to simulate the measured thermal strain during heat up from cryogenic temperature to room temperature in vacuum. The porous media approach was applied to an insulated substrate with one inch foam and compared to a simple elastic solution without pore pressure. The porous media approach is also applied to model the foam mechanical behavior during subscale laboratory experiments. In this test, a foam layer sprayed on a metal substrate is subjected to a temperature variation while the metal substrate is stretched to simulate the structural response of the tank during operation. The thermal expansion mismatch between the foam and the metal substrate and the thermal gradient in the foam layer causes high tensile stresses near the metal/foam interface that can lead to delamination.

Ghosn, Louis J.↗

On the polarization of Alpha Orionis

Much of the complex behavior of the polarization observed in the M2 supergiant Alpha Ori can be explained in terms of the combined effects of Rayleigh scattering in the photosphere and scattering by circumstellar dust in the presence of one or more photospheric hot spots. The ad hoc scattering layer of electrons which Schwarz and Clarke employed in their models reported in 1984 can be avoided, eliminating the conflict with the much lower column densities found in other studies of the extended chromosphere of this star. The transfer of polarized continuum radiation in cool model atmospheres has been treated fully. Under conditions of optimal spot area and location on the disk and large temperature differences (up to 1000 K) between the spot and normal photosphere, it is possible to get a net polarization up to about 0.3 percent in the blue in the direct starlight. The effects of spot limb darkening on the polarization of scattered spot light have been evaluated. Narrow-band observations that include molecular bands are encouraged for their diagnostic value.

Doherty, L. R.↗

On the accretion disk model of QSOs

The accretion-disk model for the optical continuum of QSOs has been investigated using the standard viscous-stress ('alpha-P') formalism. It is found that with a maximum allowable mass of 10 billion solar masses, the standard model with sub-Eddington flow falls a factor of 10 short of the luminosity of the brightest QSOs. Models with the higher mass-flow rates required to reach the maximum luminosities produce most of their energy in an optically thin region which has not yet been self-consistently treated. The disk model with sub-Eddington flow has difficulty in producing a power law of the correct slope over the optical band. It is suggested that nonthermal processes may be needed to explain the optical properties of QSOs.

Callahan, P. S.↗

Weak bump quasars

Research into the optical, ultraviolet and infrared continuum emission from quasars and their host galaxies was carried out. The main results were the discovery of quasars with unusually weak infrared emission and the construction of a quantitative estimate of the dispersion in quasar continuum properties. One of the major uncertainties in the measurement of quasar continuum strength is the contribution to the continuum of the quasar host galaxy as a function of wavelength. Continuum templates were constructed for different types of host galaxy and individual estimates made of the decomposed quasar and host continua based on existing observations of the target quasars. The results are that host galaxy contamination is worse than previously suspected, and some apparent weak bump quasars are really normal quasars with strong host galaxies. However, the existence of true weak bump quasars such as PHL 909 was confirmed. The study of the link between the bump strength and other wavebands was continued by comparing with IRAS data. There is evidence that excess far infrared radiation is correlated with weaker ultraviolet bumps. This argues against an orientation effect and implies a probable link with the host galaxy environment, for instance the presence of a luminous starburst. However, the evidence still favors the idea that reddening is not important in those objects with ultraviolet weak bumps. The same work has led to the discovery of a class of infrared weak quasars. Pushing another part of the envelope of quasar continuum parameter space, the IR-weak quasars have implications for understanding the effects of reddening internal to the quasars, the reality of ultraviolet turnovers, and may allow further tests of the Phinney dust model for the IR continuum. They will also be important objects for studying the claimed IR to x-ray continuum correlation.

Wilkes, B. J.↗

Thermal and Nonthermal X-ray Emission from the Forward Shock in Tycho's Supernova Remnant

We present Chandra CCD images of Tycho's supernova remnant that delineate its outer shock, seen as a thin, smooth rim along the straight northeastern edge and most of the circular western half. The images also show that the Si and S ejecta are highly clumpy, and have reached the forward shock at numerous locations. Most of the X-ray spectra that we examine along the rim show line emission from Si and S, which in some cases must come from ejecta; the continuum is well represented by either thermal or nonthermal models. In the case that the continuum is assumed to be thermal, the temperatures at the rim are all similar at about 2 keV, and the ionization ages are very low because of the overall weakness of the line emission. Assuming shock velocities inferred from radio and X-ray expansion measurements, these temperatures are substantially below those expected for equilibration of the electron and ion temperatures; electron to mean temperature ratios of approximately less than 0.1 - 0.2 indicate at most modest collisionless heating of the electrons at the shock. The nonthermal contribution to these spectra may be important, however, and may account for as many as half of the counts in the 4-6 keV energy range, based on an extrapolation of the hard X-ray spectrum above 10 keV.

Hwang, Una↗

Computation of atmospheric cooling rates by exact and approximate methods

Infrared fluxes and cooling rates for several standard model atmospheres, with and without water vapor, carbon dioxide, and ozone, have been calculated using a line-by-line method at 0.01/cm resolution. The sensitivity of the results to the vertical integration scheme and to the model for water vapor continuum absorption is shown. Comparison with similar calculations performed at NOAA/GFDL shows agreement to within 0.5 W/sq m in fluxes at various levels and 0.05 K/d in cooling rates. Comparison with a fast, parameterized radiation code used in climate models reveals a worst case difference, when all gases are included, of 3.7 W/sq m in flux; cooling rate differences are 0.1 K/d or less when integrated over a substantial layer with point differences as large as 0.3 K/d.

Ridgway, William L.↗

Extreme ultraviolet spectroscopy of PKS 2155-304

We present the extreme ultraviolet (75-110 A) spectrum of the BL Lac object PKS 2155-304, the first spectrum of an extragalactic source obtained with the Extreme Ultraviolet Explorer (EUVE). The spectrum shows a generally smooth continuum, which can be modeled by a single power law plus interstellar absorption, and possibly an absorption feature at approximately 80 A. The best fit to the data suggests that the EUV spectrum can be interpreted as a simple extrapolation of the X-ray continuum, with an energy index alpha is approximately = 1.6; however, shallower or steeper power laws with indices between -0.4 and 2.7 cannot be ruled out by the existing EUV data alone. The data provide strong constraints on the interstellar neutral H and He along the line of sight. Using a column density of 1.36 x 10(exp 20)/sq cm for the Galactic neutral hydrogen along the PKS 2155-304 line of sight, the neutral helium column density is constrained to be 9%-10% of the hydrogen amount.

Fruscione, Antonella↗

Performance of continuum gas viscoseals.

Viscoseals performance as predicted by three different analytical models is compared with experimental data for air as the continuum gas sealant. An experimental investigation has been conducted on two multiple-grooved two-inch diameter viscoseals up to shaft speeds of 35,000 rpm. The two seal geometries considered differ significantly insofar as groove aspect ratio is concerned. The results of this continuum investigation of sealing coefficient for the gas viscoseals suggest that the Boon and Tal model is a good design tool for the laminar continuum regime provided it is restricted to high aspect ratio groove applications.

Wilkerson, H. J.↗

Validation of a Mesoscale Fiber Kinking Model Through Test and Analysis of Double Edge Notch Compression Specimens

Tests and analyses were conducted on a series of geometrically-scaled double edge notch compression specimens to validate the capability of the fiber-kinking model in the NASA continuum damage mechanics code for progressive damage analysis, CompDam. The tests and analyses focused on the fiber-kinking damage mechanism, which is of critical importance for predicting accurately longitudinal compression failure in carbon fiber reinforced polymer laminates. The fiber-kinking model in CompDam was augmented with a new capability to represent a hardening response once a kink band has fully formed, enabling prediction of band broadening. Correlation of the test and analysis results showed agreement in stiffness and strength with less than 10% error. The analysis predicts the same sequence of events leading to ultimate failure that was found in the test. The overall excellent correlation in terms of stiffness, strength, and failure process validates the capability of the model for predicting longitudinal compression failure in notched laminates with cross-ply layups.

Bergan, Andrew C.↗

Magnetohydrodynamic model of Crab nebula radiation

The properties of the synchrotron continuum are calculated on the basis of a steady spherically symmetric MHD model of the flow in the Crab nebula. The model accounts for the spectral distribution of the continuum from the optical to gamma-rays, and semiquantitatively for its observed spatial distribution. The model does not account for the radio portion of the Crab nebula's spectrum.

Kennel, C. F.↗