Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuous variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Verification of Adaptive Protection in Hardware in the Loop for Coordination with Solar Variability

As inverter-based resources continue to be installed at all levels of the electric grid, the fixed protection schemes used at the distribution level will continue to be stressed until they no longer ensure the protection of the grid. Adaptive protection has been proposed as a solution with the ability to update the protection schemes in near real-time to ensure reliability and increase the resilience of the grid. However, weather variability poses a significant challenge to the ability of these methods to keep the selectivity and reliability of these schemes coordinated. If the ramp rates, due to solar variability, of the inverter-based resources change faster than the adaptive protection can issue new settings, the protection system could be uncoordinated, with the wrong device responding to a system fault. The proposed adaptive protection method ensures that due to solar variability, communication, and protection calculation latency, it can issu e coordinated protection settings promptly, in one minute or less. The hardware-in-the-loop results show the protection settings being issued and maintaining system coordination in under a minute.

Summers, Adam↗
NASA NTRSDate not supplied

Machine Learning Applications to Metal-Silicate Equilibria and their Insights into Core Formation

An extensive number of studies have experimentally investigated how elements distribute between metal and silicate phases, to better constrain core-mantle chemical equilibrium. Here, we present a new database compiling all (to our knowledge) experimental data on liquid metal-silicate partitioning from 118 peer-reviewed publications. We applied various machine learning techniques to gain further insights into these partitioning equilibria and their dependencies. We performed a network analysis to investigate the relationship between experiments and partition coefficients, which enables visualizing gaps in the experimental dataset and biases related to varying experimental conditions and analytical setup. In addition, semi-empirical thermodynamic models are commonly used to extrapolate these chemical reactions to the wide range of pressure, temperature and compositional conditions of planetary differentiation. These models are based on linear regressions that assume continuous relationship between partition coefficients and experimental variables. Here, we considered random forest regressions, which are algorithms based on ensembles of decision trees and does not consider continuous effects of each variable. The application of this regression significantly improves the prediction of metal-silicate partitioning for several elements including Ni, Si and Cr. We will show how this new approach improves our understanding of elemental exchange between metal and silicate and their implications for the Earth’s core formation.

siderophile element↗
NASA NTRS2014

Seasonal Evolution of Saturn's Polar Temperatures and Composition

The seasonal evolution of Saturn's polar atmospheric temperatures and hydrocarbon composition is derived from a decade of Cassini Composite Infrared Spectrometer (CIRS) 7-16 micrometers thermal infrared spectroscopy. We construct a near-continuous record of atmospheric variability poleward of 60 deg from northern winter/southern summer (2004, Ls = 293 deg) through the equinox (2009, Ls= 0 deg) to northern spring/southern autumn (2014, Ls = 56 deg). The hot tropospheric polar cyclones that are entrained by pro-grade jets within 2-3 deg of each pole, and the hexagonal shape of the north polar belt, are both persistent features throughout the decade of observations. The hexagon vertices rotated westward by approx. equal to 30 deg longitude between March 2007 and April 2013, confirming that they are not stationary in the Voyager-defined System III longitude system as previously thought. Tropospheric temperature contrasts between the cool polar zones (near 80-85 deg) and warm polar belts (near 75-80 deg) have varied in both hemispheres, resulting in changes to the vertical wind shear on the zonal jets in the upper troposphere and lower stratosphere. The extended region of south polar stratospheric emission has cooled dramatically poleward of the sharp temperature gradient near 75 deg S (by approximately -5 K/yr), coinciding with a depletion in the abundances of acetylene (0030 +/- 0.005 ppm/yr) and ethane (0.35 +/- 0.1 ppm/yr), and suggestive of stratospheric upwelling with vertical wind speeds of w approx. equal to +0.1 mm/s. The upwelling appears most intense within 5 deg latitude of the south pole. This is mirrored by a general warming of the northern polar stratosphere (+5 K/yr) and an enhancement in acetylene (0.030 +/- 0.003 ppm/yr) and ethane (0.45 +/- 0.1 ppm/yr) abundances that appears to be most intense poleward of 75 deg N, suggesting subsidence at w approx. equal to -0.15 mm/ s. However, the sharp gradient in stratospheric emission expected to form near 75 deg N by northern summer solstice (2017, Ls = 90 deg) has not yet been observed, so we continue to await the development of a northern summer stratospheric vortex. The peak stratospheric warming in the north occurs at lower pressure levels (p less than 1 mbar) than the peak stratospheric cooling in the south (p greater than 1 mbar). Vertical motions are derived from both the temperature field (using the measured rates of temperature change and the deviations from the expectations of radiative equilibrium models) and hydrocarbon distributions (solving the continuity equation). Vertical velocities tend towards zero in the upper troposphere where seasonal temperature contrasts are smaller, except within the tropospheric polar cyclones where w approx. equal to +0.02 mm/s. North polar minima in tropospheric and stratospheric temperatures were detected in 2008-2010 (lagging one season, or 6-8 years, behind winter solstice); south polar maxima appear to have occurred before the start of the Cassini observations (1-2 years after summer solstice), consistent with the expectations of radiative climate models. The influence of dynamics implies that the coldest winter temperatures occur in the 75-80 deg region in the stratosphere, and in the cool polar zones in the troposphere, rather than at the poles themselves. In addition to vertical motions, we propose that the UV-absorbent polar stratospheric aerosols entrained within Saturn's vortices contribute significantly to the radiative budget at the poles, adding to the localized enhancement in the south polar cooling and north polar warming poleward of +/-75 deg.

polar temperatures↗
DOE OSTI2025

Advanced Method Optimization with Categorical and Constrained Continuous Parameters

Traditional approaches to analytical method optimization (e.g., univariate and “guess-and-check”) can be time-consuming, costly, and often fail to identify true optima within the parameter space. Previous work defined and implemented a generalized technique for method optimization for continuous method parameters, but a knowledge gap remains for the incorporation of categorical variables into these advanced method optimization schemes. This work presents and validates a generalized optimization approach that incorporates both continuous and categorical variables while also utilizing a multivariate, multiobjective optimization scheme with Karush–Kuhn–Tucker conditions to bound the optimization space to solutions within the physical limitations of the parameter space. Method optimization from a case study using GC–MS for the analysis of 11 analytical standards with objectives to minimize peak width and maximize peak height resulted in a 3 orders of magnitude improvement in the average peak height and a 2 orders of magnitude improvement in the average peak width compared to the least optimal (but reasonable) instrumental parameters utilized in this study. This approach to optimization allows for a customizable method optimization in which users can include both continuous and categorical variables to achieve objectives specific to their analytical goals. This approach significantly reduces the labor and cost associated with traditional method development approaches and can be applied in a variety of scientific fields across a range of laboratory techniques (e.g., instrument method development, sample preparation, and extraction techniques).

Amorphous materials↗
DOE OSTI2023

A framework for understanding efficient diurnal CO 2 reduction using Si and GaAs photocathodes

Integrated solar fuels and photoelectrochemical (PEC) CO 2 reduction (CO 2 R) are promising pathways toward producing value-added chemicals from CO 2 . However, improvements are needed in activity and selectivity as well as in fundamental understanding of device behavior to engender wide deployment. Here, we report two single-junction, integrated photocathodes for PEC CO 2 R based on TOPCon Si and GaAs substrates, which achieve -10 mA cm -2 at -0.33 V vs. RHE with 41% selectivity to C 2+ products and at -0.03 V vs. RHE with 27% selectivity to C 2+ products, respectively. We investigated the viability of a light-mediated strategy to direct selectivity in buried-junction PEC devices and confirmed that these devices could be optimized independently and described by the physics-based models of the individual components. Finally, we designed a framework to assess operational modes for PEC CO 2 R devices and demonstrated this framework under continuous galvanostatic control and variable illumination conditions.

14 SOLAR ENERGY↗
DOE OSTI2022

A reinforcement learning approach to long-horizon operations, health, and maintenance supervisory control of advanced energy systems

In this work, we develop a Reinforcement Learning (RL) approach to the supervisory control problem for advanced energy systems, such as novel nuclear reactors and other demand-driven, mission-critical, and component-health-sensitive energy plants. The inclusive problem landscape considered captures the stochastic confluence of plant performance, component health evolution, power demand from the grid, diverse maintenance actions, and operator-defined goals and constraints, all considered over meaningfully long-enough reasoning horizons. Key aspects of the proposed approach are a receding horizon control-inspired technique dictating time- or event-triggered supervisory policy (re-)constructions, as well as additional capability-enabling contributions such as timescale compression, to handle long reasoning horizons and uncertainty in parts of the problem, and practical yet demonstrably-effective handling of hybrid action spaces with continuous and discrete decision variables. The resulting algorithm consists of a simulation-based RL agent constructing stochastic supervisory control policies over nontrivial action spaces and for long horizons, applying the learned policy to the system for a much shorter interval, and perpetually repeating, to construct the next long-horizon policy. That next policy will only be applied, again, for a short interval, yet originally far-in-time events move progressively closer, their associated uncertainty decreases, and new events and aspects enter the reasoning horizon. The proposed methodology bridges fundamental receding horizon concepts with the unequivocally stronger and more scalable reasoning of contemporary RL. Numerical examples using Soft Actor–Critic Deep RL illustrate the operation and efficacy of the proposed technique for a power plant tasked with health-aware load following missions in a dynamic electricity market landscape.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Calibration and field deployment of low-cost sensor network to monitor underground pipeline leakage

Recent technological advances in methane detection have improved leak detection and repair. However, current methods to reliably measure methane concentrations rely on expensive instruments or demand significant labor input. There is interest in using affordable methane sensors that are responsive to ppmv level changes in methane concentrations in both urban and rural environments for monitoring underground natural gas pipeline leaks. This is especially relevant for situations where potentially significant leaks cannot be repaired immediately or smaller leaks that require long-term monitoring and further evaluation. In this work, a low-cost sensor unit, equipped with a metal oxide sensor, was designed, built, and calibrated over a wide range of methane concentrations and environmental conditions in preparation for field application. A network of these sensors was then installed at the test site and used to measure methane concentrations at ground level above known sub-surface natural gas emissions which emulated underground gas pipeline leaks. This low-cost sensor network measured over 4 days total for the two different known leakage rates. Results demonstrate that the sensors can continuously measure relative methane variability for extended periods but require calibration for a wide range of temperature and humidity conditions to properly determine absolute gas (i.e., methane) concentrations. Furthermore, when a regression analysis was conducted to evaluate the effects of meteorological parameters on methane concentration, air temperature and wind speed have strong impacts on the concentration. Overall, the network approach allows improved identification of leak location and monitoring of underground natural gas leaks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Emergence of decadal linkage between Western Australian coast and Western–central tropical Pacific

Abstract The impact of interbasin linkage on the weather/climate and ecosystems is significantly broader and profounder than that of only appearing in an individual basin. Here, we reveal that a decadal linkage of sea surface temperature (SST) has emerged between western Australian coast and western–central tropical Pacific since 1985, associated with continuous intensification of decadal variabilities (8–16 years). The rapid SST changes in both tropical Indian Ocean and Indo-Pacific warm pool in association to greenhouse gases and volcanoes are emerging factors resulting in enhanced decadal co-variabilities between these two regions since 1985. These SST changes induce enhanced convection variability over the Maritime Continent, leading to stronger easterlies in the western–central tropical Pacific during the warm phase off western Australian coast. The above changes bring about cooling in the western–central tropical Pacific and strengthened Leeuwin Current and anomalous cyclonic wind off western Australian coast, and ultimately resulting in enhanced coupling between these two regions. Our results suggest that enhanced decadal interbasin connections can offer further understanding of decadal changes under future warmer conditions.

Science & Technology - Other Topics↗
DOE OSTI2026

A Brief Survey of Data Streaming Technologies

Streaming data is data that is emitted at variable volumes in a continuous, incremental manner with the goal of low-latency processing often at a different physical location. Network infrastructure is used to facilitate the connection between data sources and sinks, and must be robust to handle the requirements of the workflow. The U.S. Department of Energy Office of Science (DOE SC) a federal agency supporting fundamental scientific research for energy and the Nation’s largest supporter of basic research in the physical sciences. DOE SC has the responsibility for operating $\mathbf{1 0}$ National Laboratories, and 28 scientific user facilities supporting advanced supercomputers, particle accelerators, large x-ray light sources, neutron scattering sources, and other specialized facilities for nanoscience and genomics. This paper investigates the state of streaming data workfows, and details some of the approaches to this challenging problem.

Kissel, Ezra↗
DOE OSTI2022

Inverse Calculation of Burden Distribution Matrix Using B-spline Model Based PDF control in Blast Furnace Burden Charging Process

The inverse calculation of burden distribution matrix (BDM) is one of the most important challenges in the blast furnace operation in iron-making processes. In general, blast furnace consumes 65% of the total energy for the whole steel-making. Focusing on this practical challenge, this article proposes a new burden distribution spatial model in calculating burden charging process, and develops a B-spline approximation-based probability density function (PDF) control algorithm to assign the expected thickness distribution of burden layer and, thus, develops a new method for the required inverse calculation of BDM. First, a novel method for the thickness distribution of burden layer is given using B-spline model to produce an expected distribution shape subjected to a desired tracking within a specific spatial constraint. Then, according to the coexistence of continuous and bounded discrete variables in BDM, a novel hybrid optimization control method by combining integer programming and PDF tracking is further established for the effective inverse calculation of BDM. Finally, the proposed PDF-based iterative inverse calculation of BDM using B-spline models are tested using various data from industrial examples. Furthermore, the simulation results show that the proposed method is well suited to solve the BDM inverse calculation problem in practice.

42 ENGINEERING↗
DOE OSTI2024

Spike-and-Slab Shrinkage Priors for Structurally Sparse Bayesian Neural Networks

Network complexity and computational efficiency have become increasingly significant aspects of deep learning. Sparse deep learning addresses these challenges by recovering a sparse representation of the underlying target function by reducing heavily overparameterized deep neural networks. Specifically, deep neural architectures compressed via structured sparsity (e.g., node sparsity) provide low-latency inference, higher data throughput, and reduced energy consumption. In this article, we explore two well-established shrinkage techniques, Lasso and Horseshoe, for model compression in Bayesian neural networks (BNNs). To this end, we propose structurally sparse BNNs, which systematically prune excessive nodes with the following: 1) spike-and-slab group Lasso (SS-GL) and 2) SS group Horseshoe (SS-GHS) priors, and develop computationally tractable variational inference, including continuous relaxation of Bernoulli variables. We establish the contraction rates of the variational posterior of our proposed models as a function of the network topology, layerwise node cardinalities, and bounds on the network weights. Furthermore, we empirically demonstrate the competitive performance of our models compared with the baseline models in prediction accuracy, model compression, and inference latency.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Subsurface redox potential and water level at the Elkhorn Slough NERR

This resource contains various hydrological, and geochemical data from Elkhorn Slough National Estuarine Research Reserve from the years 2020 and 2021. These data have been used to assess how continuous measurements of environmental variables. The data can be used to understand processes at timescales over which biochemical transformations can happen. Especially, the data were used to explain the local subsurface hydrology, and its implication, in an experimental transect in a coasta estuary. Water level and water temperature were measured in-situ with Solinst pressure transducer loggers (Ontario, Canada). Redox potential was collected using in-situ, redox sensors (Paleoterra, The Netherlands) connected to CR1000X Campbell data loggers (Logan, Utah). Meteorological data was gathered from the Elkhorn Slough meteorological station.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Advanced Reactors Integrated Energy System: Thermal Energy Storage Island Design

The main topic of this research is integrated energy systems (IES) designed for pairing industrial thermal energy loads with advanced reactors (ARs). The Idaho National Laboratory (INL) Crosscutting Technology Development IES program and the National Reactor Innovation Center (NRIC) are seeking to develop, design, and construct an AR-IES demonstration platform that couples the thermal output from an AR operating at the INL/NRIC Demonstration of Microreactor Experiments (DOME) test bed in the Experimental Breeder II dome to a variable capacity load emulator (i.e., air-cooled radiator) and sensible thermal energy storage (TES) via a molten salt thermal energy transfer fluid. In the rapidly evolving landscape of energy supply and distribution, flexibility has emerged as a prized attribute, surpassing the traditional notions of stability and baseload generation capability. This shift in priorities is particularly evident in the context of nuclear power plants (NPPs), where adaptability over constant output is becoming more important. As our energy infrastructure and resources embraces the rise of distributed energy generation, the inherent variability in net demand continues to grow. Moreover, the use of nuclear energy as a source of heat for decarbonizing the industrial sector is becoming a very pressing topic. In such environment, advanced NPPs are poised to enter a more competitive energy market, delivering both, flexible electricity and heat. This shift motivates the exploration of TES systems, designed to empower NPPs with nimble responsiveness to market fluctuations, flexible heat delivery capabilities, and redefine their role in the energy field. TES systems offer the unique advantage of storing nuclear energy in its original form as heat, thereby affording unparalleled flexibility in its subsequent utilization.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Raptor

Raptor is an efficient Python-based tool for predicting the formation and morphology of stochastic lack of fusion defects in metal AM processes. A major obstacle for the qualification and certification of additively manufactured parts in critical applications continues to be performance variability caused in part by porosity-related defects. High-fidelity process models that could predict these defect features are currently too computationally expensive for component-level analysis. To address this, Raptor employs a high-performance geometric method to model the dynamic melt pool rather than relying on computationally intensive thermal fluid dynamics. This allows Raptor to rapidly identify regions of unmelted material that correspond to lack of fusion pores. The efficiency of this approach significantly reduces the time and resources needed for generating 3D defect predictions, which enables users to conduct large-scale parameter studies and evaluate how process variations affect part quality. The framework offers operational flexibility; users can execute simulations through a simple command line interface or integrate core functions as a library within larger computational workflows. Simulation outputs include 3D porosity maps for visualization and tools for quantitative morphological analysis. These results are suitable for direct comparison with experimental characterization data from methods such as X-ray computed tomography and can be used for statistical process optimization.

Subraveti, Vamsi [Vanderbilt Univ., Nashville, TN ↗
NASA NTRS1974

Extended observations of higher than 7-keV X-rays from Centaurus X-3 by the OSO-7 satellite

The UCSD X-ray telescope on board OSO-7 provided 43 days of continuous coverage of the variable X-ray source Cen X-3 at energies above 7 keV during December 1971 and January 1972. We detected the 4.8-sec pulsation period, the 2.087-day eclipse cycle, and an apparently nonperiodic, low-intensity state lasting more than 12 days. Spectra obtained over the 7-30 keV range during noneclipsed high-intensity states are steeper than those previously reported. Large changes, which may be characterized by a number spectral index alpha varying between 3.0 plus or minus 0.2 and 2.0 plus or minus 0.3, or by exponential spectra with kT varying from 6 plus or minus 2 to 13 plus or minus 3 keV, occur at different high-intensity states.

Baity, W. A.↗
NASA NTRS1977

Constant-power source for resistive load

Device uses operational amplifiers, dividers, subtractor, pulsed reference amplifier, and associated integrated-circuit components to deliver constantly-adjustable continual power to variable-resistance load for specialized low-power instrumentation applications.

Nagle, E. M.↗
NASA NTRS1981

Precipitation measurements for earth-space communications: Accuracy requirements and ground-truth techniques

Rainfall which is regarded as one of the more important observations for the measurements of this most variable parameter was made continuously, across large areas and over the sea. Ships could not provide the needed resolution nor could available radars provide the needed breadth of coverage. Microwave observations from the Nimbus-5 satellite offered some hope. Another possibility was suggested by the results of many comparisons between rainfall and the clouds seen in satellite pictures. Sequences of pictures from the first geostationary satellites were employed and a general correspondence between rain and the convective clouds visible in satellite pictures was found. It was demonstrated that the agreement was best for growing clouds. The development methods to infer GATE rainfall from geostationary satellite images are examined.

Ippolito, L. J.↗