Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “catalyst development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Synthesis Methods for Nanoparticle Morphology Control in Energy Applications

Lightweight nano-composite materials, nano-coatings, nanocatalysts, nano-structured materials have demonstrated an ability to reduce emissions and maximize clean energy production. Nanoparticles play an important role in engineering and decarbonization for energy applications, and a wide range of nanoparticle synthesis methods have been developed to include those that enable control over particle morphology. The ability to control nanoparticle morphology allows the tailoring and improvement of material properties that will accelerate efforts towards lowering carbon emissions by developing advanced catalysts for carbon sequestration and will enhance energy efficient processes and technologies. Synthesis methods aimed towards shape control of nanoparticles have demonstrated an ability to form spheres, rods, flower-like shapes, cubes, plates, shells, and chiral geometries. Processing methods used to form these morphologies include microwave assisted synthesis, solvothermal, hydrothermal, and a wide range of capping agents. A discussion of a few of these methods is given along with results and applications.

36 MATERIALS SCIENCE↗

Kinetics and Reactor Modeling of VFA Ketonization for Sustainable Aviation Fuel Production

Ketonization of volatile fatty acids (VFAs) produced via arrested methanogenesis of wet waste represents the only unit operation of wet waste upgrading to sustainable (net-zero or negative life cycle CO2 emissions) aviation fuel not currently in industrial practice. Ketone product yields of close to 100% have been obtained during gas-phase reactions of VFAs over oxide catalysts at the laboratory scale, but design of an industrial ketonization reactor requires understanding of the impacts of reactant and product partial pressures, deactivation, and heat and mass transport phenomena on observed ketonization rates. Our work leverages rigorous kinetic analysis of ketonization processes to inform reactor scale-up efforts through packed-bed reactor modeling. We first present results of a kinetic study of ketonization of a model VFA, hexanoic acid, over an industrial ZrO2 catalyst performed in a packed-bed microreactor in conditions free of significant heat or mass transfer gradients. Major findings of the analysis include: (i) hexanoic acid saturates all catalyst active sites at relatively low partial pressure (~10 kPa) and (ii) ketonization products 6-undecanone, water, and CO2 inhibit reaction rates. Kinetic data are used to fit a rate expression quantifying the functional dependence of ketonization rate on partial pressures of VFA reactants and ketone, water, and CO2 products. A packed-bed reactor model describing vapor-phase hexanoic acid ketonization over ZrO2 extrudate catalysts is developed based on the kinetic model. The effects of (i) bed- and pellet-scale mass- and heat-transfer limitations and (ii) axial pressure drop guide our development of recommendations for optimal sizing, temperature, and influent flow composition of an industrial-scale ketonization reactor. The quantitative understanding of VFA ketonization developed in this study represents an advance toward derisking the VFA ketonization step of wet waste upgrading to sustainable aviation fuel.

biojet↗

Few layer graphene synthesis on transition metal ferrite catalysts

Development of cheap, green and up scalable production methods for graphene is one of the most challenging problems in its manufacture on an industrial scale. We report here a large scale substrate-free fluidized bed catalytic chemical vapour deposition (FB-CCVD) process for few layer graphene (FLG) powder production that uses a crystalline oxide catalyst of the general formula A(x)B(3-x)O(4), wherein the FLG layer thickness and domain sizes can be varied. A and B can be chosen from a list of transition elements including Co, Fe, Ni, Mn, Cu and Zn. The best results in terms of activity and selectivity are obtained for the CoxFe3-xO4 system. We also investigated the reaction mechanism using in situ EXAFS and Raman spectroscopy, and electron tomography. Since FB-CCVD processes are already used for industrial scale production of carbon nanotubes, this process should enable the large scale production of free standing FLG in the near future.

Bacsa, Revathi R.↗

Ruthenium-lead oxide for acidic oxygen evolution reaction in proton exchange membrane water electrolysis

Developing an active and stable anode catalyst for the proton exchange membrane water electrolyzer (PEM-WE) is a critical objective to enhance the economic viability of green hydrogen technology. However, the expensive iridium-based electrocatalyst remains the sole practical material with industrial-level stability for the acidic oxygen evolution reaction (OER) at the anode. Ruthenium-based catalysts have been proposed as more cost-effective alternatives with improved activity, though their stability requires enhancement. The current urgent goal is to reduce costs and noble metal loading of the OER catalyst while maintaining robust activity and stability. Here, in this study, we design a Ru-based OER catalyst incorporating Pb as a supporting element. This electrocatalyst exhibits an OER overpotential of 201 mV at 10 mA.cm -2 , simultaneously reducing Ru noble metal loading by similar to 40%. Normalization of the electrochemically active surface area unveils improved intrinsic activity compared to the pristine RuO 2 catalyst. During a practical stability test in a PEM-WE setup, our developed catalyst sustains stable performance over 300 h without notable degradation, underscoring its potential for future applications as a reliable anodic catalyst.

Electrocatalysis↗

Engineering New Catalysts for In-Process Elimination of Tars

The key objective of this project was to develop a new and more efficient methodology for engineering and economically producing optimized robust catalysts for the reduction or elimination of tars in biomass gasification. Whereas current catalyst technology typically disposes thin layers of catalytically-active material onto rigid supports via wet chemistry-based methods, this project investigated novel thermal methods for directly incorporating catalytically active materials onto robust supports as well as novel approaches for incorporating catalytically active materials on and/or within an otherwise inert refractory support material which is then subsequently formed and processed to create a catalytically-active material on all exposed surfaces. Specifically, the focus of this engineered catalyst development was on materials which were derived from, or otherwise related to, olivine-like minerals, due to the inherent attrition resistance and moderate catalytic properties exhibited by natural olivine when used in a fluidized bed biomass gasifier. Task 1 of this project successfully demonstrated the direct thermal impregnation of catalytically-active materials onto an olivine substrate, with the production of a Ni-olivine catalyst. Nickel and nickel oxide were thermally impregnated onto an olivine substrate and when reduced were shown to demonstrate improved catalytic activity over the baseline olivine material and equal the tar-decomposing performance of Ni-olivine catalysts prepared by conventional wet impregnation. Task 2 involved coordination with our subcontracted project partners to further develop and characterize catalyst formulations and to optimize activity and production methods. Within this task, several significant new materials were developed. NexTech Materials developed a sintered ceramic nickel-magnesium-silicate catalyst that demonstrated superb catalytic activity and high resistance to deactivation by H2S. Alfred University developed both supported and integrated (bulk) catalysts via a glass-ceramic processing route which were shown to exhibit excellent catalytic activity and superior resistance to attrition deactivation. With the discovery of these active, robust, glass-based catalysts, and with the permission of the project officer, the investigation of waste-based materials as originally proposed for Task 3 and pilot-scale testing proposed in Task 5 were deferred indefinitely in favor of further investigation of the glass-ceramic based catalyst materials. This choice was justified in part because during FY 2006 and through FY 2007, funding restrictions imposed by congressional budget choices significantly reduced funding for DOE biomass-related projects. Funding for this project was limited to what had been authorized which slowed the pace of project work at GTI so that our project partners could continue in their work. Thereafter, project work was allowed to resume and with restored funding, the project continued and concentrated on the development and testing of glass-ceramic catalysts in bulk or supported formats. Work concluded with a final development devoted to increasing the surface area of glass-ceramic catalysts in the form of microspheres. Following that development, project reporting was completed and the project was concluded.

03 NATURAL GAS↗

Silver-Intermediated Perovskite La 0.9 FeO 3–δ toward High-Performance Cathode Catalysts for Nonaqueous Lithium–Oxygen Batteries

Development of efficient cathode catalysts is crucial for achieving high-performance rechargeable lithium–oxygen batteries. Herein, a simple one-step electrospun method was applied to obtain a silver-modified perovskite La 0.9 FeO 3–δ (Ag@LFO) as an efficient cathode catalyst. The synthesized catalyst has two characteristics: first, the doping of Ag led to a tailored electronic structure including the generation of Fe 4+ ; second, the in situ grown Ag exhibits a stronger interaction with perovskite. These two advantages result in high oxygen adsorbability and increased percentage of highly active oxygen species. Furthermore, film-like Li 2 O 2 was observed during discharge on the Ag@LFO cathode, which is beneficial for decomposition during recharge, whereas Li 2 O 2 generated on the LFO cathode was largely toroidal. Density functional theory calculations were used to discuss the Li 2 O 2 growth mechanism. As a result, compared to La 0.9 FeO 3–δ and post-loading silver-decorated La 0.9 FeO 3–δ (Ag/LFO), Ag@LFO exhibits lower overpotential, improved rate-capability, higher discharge specific capacity, and especially promoted cycling performance that is triple that of LFO.

25 ENERGY STORAGE↗

Co-Production of Electricity and Hydrogen Using a Novel Iron-based Catalyst

The primary objective of this project was to develop a hydrogen production technology for gasification applications based on a circulating fluid-bed reactor and an attrition resistant iron catalyst. The work towards achieving this objective consisted of three key activities: Development of an iron-based catalyst suitable for a circulating fluid-bed reactor; Design, construction, and operation of a bench-scale circulating fluid-bed reactor system for hydrogen production; Techno-economic analysis of the steam-iron and the pressure swing adsorption hydrogen production processes. This report describes the work completed in each of these activities during this project. The catalyst development and testing program prepared and iron-based catalysts using different support and promoters to identify catalysts that had sufficient activity for cyclic reduction with syngas and steam oxidation and attrition resistance to enable use in a circulating fluid-bed reactor system. The best performing catalyst from this catalyst development program was produced by a commercial catalyst toll manufacturer to support the bench-scale testing activities. The reactor testing systems used during material development evaluated catalysts in a single fluid-bed reactor by cycling between reduction with syngas and oxidation with steam. The prototype SIP reactor system (PSRS) consisted of two circulating fluid-bed reactors with the iron catalyst being transferred between the two reactors. This design enabled demonstration of the technical feasibility of the combination of the circulating fluid-bed reactor system and the iron-based catalyst for commercial hydrogen production. The specific activities associated with this bench-scale circulating fluid-bed reactor systems that were completed in this project included design, construction, commissioning, and operation. The experimental portion of this project focused on technical demonstration of the performance of an iron-based catalyst and a circulating fluid-bed reactor system for hydrogen production. Although a technology can be technically feasible, successful commercial deployment also requires that a technology offer an economic advantage over existing commercial technologies. To effective estimate the economics of this steam-iron process, a techno-economic analysis of this steam iron process and a commercial pressure swing adsorption process were completed. The results from this analysis described in this report show the economic potential of the steam iron process for integration with a gasification plant for coproduction of hydrogen and electricity.

08 HYDROGEN↗

A pair of metal organic framework (MOF)-derived oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts for zinc-air batteries

Metal organic frameworks (MOFs) are amazing precursors for the development of functional catalysts due to their ability of being modified both structurally and in terms of composition. Here this work presents a pair of MOF - derived oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts for the advancement of zinc-air batteries. Zeolitic imidazolate frameworks (ZIF) are known as ideal materials to create doped carbons. Combining with a sacrificial tellurium template, we have developed a “pseudo-carbon nanotube” with a ZIF-8 that is doped with a mixture of zinc, cobalt, and iron. The resulting mixed-metal doped porous carbon nanotubes (CoFeZn@pCNT) show excellent catalytic activity for ORR with a half-way ORR potential (E 1/2 ) of 0.87 V vs. RHE (reverse hydrogen electrode). Iridium-based catalysts are known as the best option for OER so far, but it is not viable for practical applications due to cost restrictions. Previous research into alternative catalysts has focused on metal oxides with first-row transition metals. Metal sulfides provide superior conductivity compared to metal oxides and are a new frontier in the search for affordable, active, and stable OER catalysts. By combining cobalt, iron, and nickel into a MOF structure (ZIF-67), followed by a sulfurization process, a MOF-derived mixed-metal sulfide catalyst (FeCoNi–S@ZIF) has been developed in this study. The resulting catalysts show an onset OER potential of 1.65 V vs. RHE at 10 mA cm -2 and exhibit remarkable stability for the operation of zinc-air batteries.

25 ENERGY STORAGE↗

Catalysts by pyrolysis: Direct observation of chemical and morphological transformations leading to transition metal-nitrogen-carbon materials

Transition metal-nitrogen-carbon materials (M-N-C catalysts) are promising electrocatalysts in polymer electrolyte fuel cells (PEFCs) and electrolyzer applications. High temperature treatment in inert atmosphere (pyrolysis) is the essential, most common method for the synthesis of M-N-C catalysts and critical to achieve high electrocatalytic activity and electronic conductivity. To this day, despite many uses and successful implementations in materials manufacturing, pyrolysis has been an entirely empirical technology, with process control and optimization relying exclusively on “Edisonian” approach. The knowledge gap in the mechanism about how the precursor is being transformed into catalysts hinders further development of the M-N-C catalysts regardless of the precursor class and processing protocols. In this work, we probed the morphological evolution and chemical transformation of a nitrogen-containing charge transfer organic salt, mixed with transition metal (iron) salt and amorphous silica powder (precursor) during the pyrolysis process via a combination of in situ synchrotron and laboratory-based diagnostic techniques. The pyrolysis process is found to be divided into three stages. During a controlled temperature ramp, the selected organic N-C precursor (nicarbazin) began melting and decomposing just below 400 °C, forming a certain number of micrometer-scale pores and pathways. With increase in temperature from 400 °C to 900 °C, amorphous carbon domains started forming, and reduced (metallic) iron nanoclusters appeared, being dispersed uniformly throughout the carbonaceous matrix. When temperature advanced above 900 °C, graphitization of carbon commenced, associated with appearance and evolution of atomically dispersed metal-nitrogen moieties in the carbonaceous matrix. As the graphitization advanced further, a secondary process of agglomeration of metal nanoparticles occurred. Multi-analytical technique observations conducted here provide a base for rational design and optimization of M-N-C electrocatalysts via pyrolysis.

36 MATERIALS SCIENCE↗

Single-Doped and Multidoped Transition-Metal (Mn, Fe, Co, and Ni) ZnO and Their Electrocatalytic Activities for Oxygen Reduction Reaction

The electrochemical oxygen reduction reaction (ORR) is the limiting half-reaction of fuel cells, which is mediated by using platinum-based catalysts. Hence, the development of low-cost, active ORR catalysts is highly required to make fuel cell technology commercially available. In this report, transition-metal (TM; Mn, Fe, Co, and Ni) single-doped and multidoped (MD) ZnO nanocrystals (ZNs) were prepared for use as ORR catalysts using a simple precipitation method. The effects of single doping and multidoping on the structure, morphology, and properties of the TM-doped ZNs were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence, X-ray photoelectron microscopy, electron paramagnetic resonance, and Raman and photoluminescence (PL) spectroscopies. The XRD results reveal that synthesized ZnO samples retained a pure hexagonal wurtzite crystal structure, even at high levels of multidoping (nominal 20%). SEM analyses show that the morphology of the prepared ZNs varies with the doping elements, doping mode, and amounts of doping. The observation of peak shifting and peak intensity changes in Raman studies confirms the presence of dopants in ZnO. The PL investigation reveals that the incorporation of dopants into the ZnO structure increases the oxygen vacancies within the materials. The highest oxygen vacancies were present in Mn-doped ZnO and 15% MD ZnO among the single-doped and MD samples, respectively. Linear-sweep voltammetry studies conclude that doped ZnO shows enhanced ORR activity compared to the undoped samples. The Mn-doped ZnO and 15% MD ZnO exhibited the highest ORR activity among the prepared single-doped and MD ZN samples, respectively. In comparison, single doping showed better ORR activity than the multidoping system. The enhanced ORR activity of the synthesized ZN materials correlates with the amount of oxygen vacancies present in the samples. Finally, the enhanced activity of TM-doped ZnO suggests that these materials can be used as potential, low-cost electrocatalysts for ORR in fuel cell technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Hydrogen-bonded Bimolecular Formic Acid–Formate Complexes for Formic Acid Decomposition on Copper: A Combined First-Principles and Microkinetic Modeling Study

Hydrogen bonding interactions alter the nanoscale reaction mechanisms of many chemistries. Yet, it remains unclear how they affect heterogeneously catalyzed decomposition of formic acid (FA), a reaction of intense interest since FA is a promising hydrogen carrier. In this work, we elucidate how hydrogen bonding affects the reaction mechanisms for FA decomposition on Cu(111) by combining first-principles density functional theory calculations to calculate reaction energetics, Latin-hypercube sampling to elucidate stable high-coverage adsorbate configurations, and coverage self-consistent mean-field microkinetic models to predict reaction kinetics. We demonstrate that hydrogen-bonded complexes of FA with formate (bimolecular FA–HCOO complexes) can play a dominant role in FA decomposition. Specifically, our first-principles calculations show that hydrogen bonding of FA with HCOO may stabilize the crucial monodentate HCOO intermediate and the transition states for HCOO decomposition, especially at low coverages. We predict that, depending on the reaction conditions, 40–80% of the reaction flux goes through pathways involving the bimolecular FA–HCOO complexes. Additionally, the active site for FA decomposition on Cu(111) involves a high coverage (~0.4 monolayers (ML)) of these complexes, which unexpectedly stabilize intermediates and transition states via van der Waals interactions. Our work provides molecular insights consistent with previous experimental observations on supported Cu/Al 2 O 3 catalysts. This paves the way toward the development of novel catalysts for FA decomposition as well as for other industrially important chemistries with intermediates capable of hydrogen bonding, such as ammonia electrooxidation and CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen Reduction at PtNi Alloys in Direct Methanol Fuel Cells—Electrode Development and Characterization

Catalyst layers made from novel catalysts must be fabricated in a way that the catalyst can function to its full potential. To characterize a PtNi alloy catalyst for use in the cathode of Direct Methanol Fuel Cells (DMFCs), the effects of the manufacturing technique, ink composition, layer composition, and catalyst loading were here studied in order to reach the maximum performance potential of the catalyst. For a more detailed understanding, beyond the DMFCs performance measurements, we look at the electrochemically active surface area of the catalyst and charge-transfer resistance, as well as the layer quality and ink properties, and relate them to the aspects stated above. As a result, we make catalyst layers with optimized parameters by ultrasonic spray coating that shows the high performance of the catalyst even when containing less Pt than commercial products. Using this approach, we can adjust the catalyst layers to the requirements of DMFCs, hydrogen fuel cells, or polymer electrolyte membrane electrolysis cells.

30 DIRECT ENERGY CONVERSION↗

Development, characterization, and modeling of a high-performance Ru/B2CA catalyst for ammonia synthesis

This paper documents the development and performance of a nano-phase Ru catalyst on a (BaO) x (CaO) y (Al 2 O 3 ) support. Extensive screening of the support’s ternary composition shows the best stoichiometry is (BaO) 2 (CaO)(Al 2 O 3 ), denoted B2CA. The paper first describes catalyst preparation and characterization. The paper reports a detailed 12-step reaction mechanism that represents ammonia synthesis over wide ranges of temperature, pressure, space velocity, and feed composition. Additionally, the mechanism is developed and validated using results of packed-bed experiments. The elementary reaction pathways consider surface adsorbates, including catalyst-poisoning behaviors. The rate expressions include important coverage-dependent activation barriers. Machine learning models assist interpretation of the catalyst-support interactions. The detailed chemistry is much more predictive than is possible with global representations (N 2 + 3H 2 ⇌ 2NH 3 ). The validated models can be applied to assist optimizing reactor design and operating conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Infrared spectroscopy of Mg–CO{sub 2} and Al–CO{sub 2} complexes in helium nanodroplets

The catalytic reduction of CO{sub 2} to produce hydrocarbon fuels is a topic that has gained significant attention. Development of efficient catalysts is a key enabler to such approaches, and metal-based catalysts have shown promise towards this goal. The development of a fundamental understanding of the interactions between CO{sub 2} molecules and metal atoms is expected to offer insight into the chemistry that occurs at the active site of such catalysts. In the current study, we utilize helium droplet methods to assemble complexes composed of a CO{sub 2} molecule and a Mg or Al atom. High-resolution infrared (IR) spectroscopy and optically selected mass spectrometry are used to probe the structure and binding of the complexes, and the experimental observations are compared with theoretical results determined from ab initio calculations. In both the Mg–CO{sub 2} and Al–CO{sub 2} systems, two IR bands are obtained: one assigned to a linear isomer and the other assigned to a T-shaped isomer. In the case of the Mg–CO{sub 2} complexes, the vibrational frequencies and rotational constants associated with the two isomers are in good agreement with theoretical values. In the case of the Al–CO{sub 2} complexes, the vibrational frequencies agree with theoretical predictions; however, the bands from both structural isomers exhibit significant homogeneous broadening sufficient to completely obscure the rotational structure of the bands. The broadening is consistent with an upper state lifetime of 2.7 ps for the linear isomer and 1.8 ps for the T-shaped isomer. The short lifetime is tentatively attributed to a prompt photo-induced chemical reaction between the CO{sub 2} molecule and the Al atom comprising the complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Balancing elementary steps enables coke-free dry reforming of methane

Balancing kinetics, a crucial priority in catalysis, is frequently achieved by sacrificing activity of elementary steps to suppress side reactions and enhance catalyst stability. Dry reforming of methane (DRM), a process operated at high temperature, usually involves fast C-H activation but sluggish carbon removal, resulting in coke deposition and catalyst deactivation. Studies focused solely on catalyst innovation are insufficient in addressing coke formation efficiently. Herein, we develop coke-free catalysts that balance kinetics of elementary steps for overall thermodynamics optimization. Beginning from a highly active cobalt aluminum oxide (CoAl 2 O 4 ) catalyst that is susceptible to severe coke formation, we substitute aluminum (Al) with gallium (Ga), reporting a CoAl 0.5 Ga 1.5 O 4 -R catalyst that performs DRM stably over 1000 hours without observable coke deposition. We find that Ga enhances DRM stability by suppressing C-H activation to balance carbon removal. A series of coke-free DRM catalysts are developed herein by partially substituting Al from CoAl 2 O 4 with other metals.

36 MATERIALS SCIENCE↗

Development of solar fuels photoanodes through combinatorial integration of Ni–La–Co–Ce oxide catalysts on BiVO 4

The development of an efficient photoanode remains the primary materials challenge in the establishment of a scalable technology for solar water splitting. The typical photoanode architecture consists of a semiconductor light absorber coated with a metal oxide that serves a combination of functions, including corrosion protection, electrocatalysis, light trapping, hole transport, and elimination of deleterious recombination sites. To date, such coatings have been mostly limited to simple materials such as TiO 2 and Co-Pi, with extensive experimental and theoretical effort required to provide an understanding of the physics and chemistry of the semiconductor-coating interface. In order to provide a more efficient exploration of metal oxide coatings for a given light absorber, we introduce a high throughput methodology wherein a uniform BiVO 4 thin film is coated with 858 unique metal oxides covering a range of metal oxide loadings and the full Ni–La–Co–Ce oxide quaternary composition space. Photoelectrochemical characterization of each photoanode reveals that approximately one third of the coatings lower the photoanode performance while select combinations of metal oxide composition and loading provide up to a 14-fold increase in the maximum photoelectrochemical power generation for oxygen evolution in pH 13 electrolyte. Particular Ce-rich coatings also exhibit an anti-reflection effect that further amplifies the performance, yielding a 20-fold enhancement in power conversion efficiency compared to bare BiVO 4 . By use of in situ optical spectroscopy and comparisons between the metal oxide coatings and their extrinsic optical and electrocatalytic properties, we present a suite of data-driven discoveries, including composition regions which form optimal interfaces with BiVO 4 and photoanodes that are suitable for integration with a photocathode due to their excellent power conversion and solar transmission efficiencies. The high throughput experimentation and informatics provides a powerful platform for both identifying the pertinent interfaces for further study and discovering high performance photoanodes for incorporation into efficient water splitting devices.

10 SYNTHETIC FUELS↗