Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bulk solvent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

In Situ Carbon and Sulfur Isotope Analysis of Archean Organic Matter and Pyrite

Stable isotopic compositions of biologically important elements (e.g., C and S) in sedimentary rocks are valuable biosignatures to the extent that they indicate the presence and variable expression of microbial metabolisms in space and time. Strong interactions between the carbon and sulfur cycles (e.g., via organic matter remineralization during microbial sulfate reduction) make coordinated, in situ C and S isotope analysis by secondary ion mass spectrometry (SIMS) a particularly powerful tool. In rocks ranging in age from 2.7-2.5 Ga, expansions in the ranges of delta C-13 of organic matter and delta S-34 of pyrite likely reflect the increasing influence of oxygenic photosynthesis in the surface ocean (as well as methane and sulfur metabolisms in deeper waters), whereas the large range of mass independent sulfur isotope fractionation (Delta S-33) suggests that the atmosphere remained anoxic until approx 2.4 Gyr ago. We report in situ delta C-13 measurements of organic matter in the approx 2.7-2.6 Ga Carawine Dolomite, Marra Mamba Iron Formation, and Jeerinah, Wittenoom, and Tumbiana Formations, as well as the approx 2.5 Ga Mount McRae Shale. We also report in situ delta S-24 and Delta S-33 measurements of pyrite associated with organic matter in a subset of these samples. In a single square cm sample of the Tumbiana Formation with bulk delta C-13(sub org) of -49.7% (VPDB), two distinct kerogen types have delta C-13 values, measured in situ, consistent with oxygenic photosynthesis (-33%) and methane metabolism (-52%). In a sample from the ABDP-9 core, radiobitumen associated with a uraniferous mineral grain is C-13-enriched by 8% (-26.8%0) relative to average in situ kerogen (-34.9%0) and similar in delta C-13 to solvent extractable hydrocarbons from the Mount McRae Shale (avg delta C-13 = -27.1 %). Average reproducibility for delta C-13 was 0.4% (2 SD) using a 6 micron spot and 0.8% using a 3 micron spot. In situ sulfur isotope analyses of 33 authigenic pyrite grains in 3 samples of the ABDP-9 core using a 10 micron spot (2 SD reproducibility = 0.4% for delta S-34 and -0.1% for Delta S-33) show a range of 28.1 % in delta S-34 (-10.3 to 17.8%) and 13.3%0 in Delta S-33 (-3.8 to 9.5%), whereas the range from 132 bulk analyses across 84 m of core is 19.4% for delta S-34 and 11.5% for Delta S-33. Coordinated, in situ carbon and sulfur isotope analyses in one ABDP-9 sample are shown. In situ values from this kerogen-pyrite association are within 0.1% of the bulk value in the case of delta C-13 and higher by several permil in the case of delta S-34 and Delta S-33. Coordinated in situ carbon and sulfur isotope analyses in rocks deposited during key intervals of environmental change (e.g., the Great Oxidation Event) can refine our understanding of the mode and tempo of change. In Earth's oldest sedimentary rocks, and in extraterrestrial samples, these coordinated in situ analyses may reveal biosignatures in the form of isotopic correlations at the scale of individual microorganisms and their microhabitats.

Williford, K. H.↗

Project 18-15263 X-ray Studies of Interfacial Molecular Complexes in ALSEP Back-Extraction (Research Performance Final Report)

The objective of the project was to use synchrotron X-rays to measure the molecular-scale organization of extractants, complexants, buffers, and metal ions at the organic-aqueous (liquid-liquid) interface during solvent back-extraction under conditions relevant to ALSEP (Actinide-Lanthanide Separation Process). The capability of X-ray fluorescence near total reflection (XFNTR) was extended to explore the distribution of Eu(III) between the liquid-liquid interface and bulk organic and aqueous phases which contained extractants HDEHP (bis(2-ethylhexyl) phosphoric acid) and HEHEHP (2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester), the complexant DTPA (diethylene triamine pentaacetic acid), and citric and nitric acids. Although an Am-compatible sample cell was developed, extending x-ray measurements of flat liquid-liquid interfaces to the actinide Am(III) did not prove to be possible within constraints imposed by the Advanced Photon Source. However, preliminary measurements with a drop cell may eventually provide a path forward to investigate Am(III) at a liquid interface. It was also demonstrated that competitive binding that occurs during back-extraction of lanthanide ions to either a phosphoric acid extractant (DHDP, di-hexadecyl phosphate) at the liquid interface or to complexant DTPA in the bulk aqueous phase could be reversibly tuned by X-ray exposure. Separately, X-ray measurements from the liquid-vapor interface explored the role of the aqueous solubility of HDEHP and HEHEHP and their interactions with a range of lanthanides and transition metal ions. Finally, the capability of X-ray absorption spectroscopy (EXAFS) was extended to probe metal ion coordination in lanthanide ion-extractant complexes at the liquid-vapor interface. Complementary to the specific interfacial systems studied during this project, the development of x-ray techniques expands our ability to understand ion ordering at liquid interfaces.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Phenoxy Resins Containing Pendent Ethynyl Groups

Ethynyl-containing phenoxy resins have excellent shelf life in solution or in bulk. Cured ethynyl-containing phenoxy resins offer lower moisture absorption, higher use temperatures, and better thermal stability over stateof-the-art cross-linked phenoxy resins. Depending upon cross-link density, cured ethynyl-modified phenoxy resins are solvent resistant but still thermoformable and relatively tough. Modified resins show potential for use as adhesives, composite matrices, solvent-resistant coatings, membranes, insulators, and films.

Hergenrother, P. M.↗

Standard electrode potential, Tafel equation, and the solvation thermodynamics

Equilibrium in the electronic subsystem across the solution-metal interface is considered to connect the standard electrode potential to the statistics of localized electronic states in solution. We argue that a correct derivation of the Nernst equation for the electrode potential requires a careful separation of the relevant time scales. An equation for the standard metal potential is derived linking it to the thermodynamics of solvation. The Anderson-Newns model for electronic delocalization between the solution and the electrode is combined with a bilinear model of solute-solvent coupling introducing nonlinear solvation into the theory of heterogeneous electron transfer. We therefore are capable of addressing the question of how nonlinear solvation affects electrochemical observables. The transfer coefficient of electrode kinetics is shown to be equal to the derivative of the free energy, or generalized force, required to shift the unoccupied electronic level in the bulk. The transfer coefficient thus directly quantifies the extent of nonlinear solvation of the redox couple. The current model allows the transfer coefficient to deviate from the value of 0.5 of the linear solvation models at zero electrode overpotential. The electrode current curves become asymmetric in respect to the change in the sign of the electrode overpotential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analytical Results from Routine DSSHT and SEHT Monthly Samples

Strip Effluent Hold Tank (SEHT) and Decontaminated Salt Solution Hold Tank (DSSHT) samples from several of the “microbatches” of Integrated Salt Disposition Project (ISDP) Salt Batch (“Macrobatch”) 8B have been analyzed for 238 Pu, 90 Sr, 137 Cs, cations (Inductively Coupled Plasma Emission Spectroscopy - ICPES), and anions (Ion Chromatography Anions - IC-A). The analytical results from the current microbatch samples are similar to those from previous macrobatch samples. The Actinide Removal Process (ARP) and the Modular Caustic-Side Solvent Extraction Unit (MCU) continue to show more than adequate Pu and Sr removal for times when monosodium titanate (MST) is used. Even with no MST strike being performed there exists some small Pu and Sr removal, likely from filtration of fines containing these elements. The Cs removal continues to be excellent, with decontamination factors (DF) averaging 16,400. The bulk chemistry of the DSSHT and SEHT samples do not show any signs of unusual behavior. SRNL recommends that a sample of the strip feed be analyzed for cation and anion content if a further decline in boron concentration is noted in future SEHT samples.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Facile Preparation of Light Emitting Organic Metal Halide Crystals with Near-Unity Quantum Efficiency

Here, we report the synthesis and characterization of (Ph 4 P) 2 SbCl 5 , a novel ionically bonded organic metal halide hybrid with a zero-dimensional (0D) structure at the molecular level. By cocrystallization of tetraphenylphosphonium (Ph 4 P + ) and antimony (Sb 3+ ) chloride salts, (Ph 4 P) 2 SbCl 5 bulk single crystals can be prepared in high yield, which exhibit a highly efficient broadband red emission peaked at 648 nm with a photoluminescence quantum efficiency (PLQE) of around 87%. Density functional theory (DFT) calculations reveal the origin of emission as phosphorescence from the excitons localized at SbCl 5 2– with strong excited-state structural distortion. Interestingly, (Ph 4 P) 2 SbCl 5 bulk crystals with a PLQE of around 100% can be prepared via a rapid crystal growth process within minutes, followed by a spontaneous structural transformation. It was found that the rapid growth process yielded a yellow emitting kinetically favored metastable product containing solvent molecules, which turned into the red emitting thermodynamically stable product slowly at room temperature or quickly upon thermal treatment.

36 MATERIALS SCIENCE↗

The Ionization Constants of DCO{sub 3}{sup -} and DPO{sub 4}{sup 2-} under Candu Reactor Primary Coolant Conditions by Raman Spectroscopy

The ionization constants of bicarbonate and hydrogen phosphate have been measured in light and heavy water up to 325 deg. C using Raman spectroscopy. Ionization constants in heavy water at temperatures above 100 deg. C have been measured for very few acids and bases. Together with other results, this work will be used to develop and verify models of the deuterium isotope effect on oxide solubilities in Candu reactor primary coolant. A custom-built titanium/sapphire flow cell was paired with a Horiba Jobin Yvon HR800 LabRAM system to collect Raman spectra of aqueous solutions under Candu primary coolant temperatures. The temperature-controlled cell is made of materials that are relatively inert under the extreme experimental conditions required for hydrothermal studies. Raman spectra were collected with detector polarizations parallel and perpendicular to the laser polarization. These were subtracted and corrected to obtain the reduced isotropic spectrum, which contains only symmetric vibrations, has a flat baseline, and has peak areas proportional to species concentration. Vibrational modes involving deuterium are shifted to lower wavenumbers in heavy water due to the increased mass of deuterium over hydrogen. The speciation between the two solvents is also measurably different. The relative concentration of the acidic species in solution increases with temperature, making its peaks easier to fit at high temperatures. The Raman band positions shift to lower wavenumbers with increasing temperature because the hydrogen bonding in bulk water begins to break down, which strengthens hydrogen bonding to the ions. The basic equilibrium constants were determined from the concentration of each species in solution combined with an activity coefficient model. A simplified form of the 'density' model was then fitted to the data. These fit results were combined with literature values of pK{sub w} in light and heavy water to determine the pK{sub a} values at saturation vapor pressure. The experimental results show excellent agreement with known literature values in light water where they exist at lower temperatures. These equilibrium constants are the first to be reported for both chemical systems in heavy water above 25 deg. C. This work extends the equilibrium constants in H{sub 2}O: - For HCO{sub 3}{sup -} from 250 deg. C to 325 deg. C; - For HPO{sub 4}{sup 2-} from 50 deg. C to 300 deg. C. These are the first ever ionization constants in D{sub 2}O for DPO{sub 4}{sup 2-} and the first values above 25 deg. C for DCO{sub 3}{sup -}. These results will be used to develop predictive models for the deuterium isotope effect on activated corrosion product transport under Candu nuclear reactor primary coolant conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Reorganization of Water at Aqueous Aluminum Chloride (AlCl 3 ) Interfaces: Vibrational Sum Frequency Generation and Molecular Dynamics Simulations

AlCl 3 hydration states and complexation are not well understood both in solutions and at the air–aqueous interface despite their potential significance in natural waters and their industrial and energy-related applications. Here, we investigated Al 3+ and Cl – ion behaviors in an AlCl 3 aqueous bulk solution and at the air–aqueous interface using interface-selective vibrational sum frequency generation (SFG), Raman and infrared spectroscopies, molecular dynamics (MD) simulation, as well as molecular-informed reduced modeling. Our reduced modeling reveals relatively long-range effects for Al 3+ as compared to monovalent ions such as Na + indicating that the interfacial depth of trivalent ions can be significantly larger than that of monovalent ions at the air–water interface. MD simulations reveal interfacial stratification and multiple layering of the ions. Compression of the Al 3+ and Cl – distributions with increasing concentrations from 0.5 to 2.5 m is also observed in the subsurface regions. Significant SSP- and PPP-polarized SFG OH spectral intensity increases are observed from 0.5 to 1.5 m and 0.5 to 2.5 m, respectively, indicative of interfacial depth increases and a change in average orientation above 1.5 m. Extensive evaluation of SFG spectra, Fresnel-corrected using several approaches, shows the same trends. The nonmonotonic trend points to a changing structure in surface and subsurface water orientation and hydrogen bonding environment generally consistent with the MD simulation of stratification and water orientation changes. Furthermore, solvent-shared ion pairing is implicated with MD simulation radial distribution analysis and consistent with infrared spectral identification of the hexaaqua aluminum ion in the solution phase. Spectral evidence of a strong Al 3+ hydration shell and the acidic behavior of the Al 3+ ions is obvious in the Raman and infrared spectra of the bulk solution. In conclusion, we show that the MD dipole potential is directly related to the MD second-order susceptibility of the interface, χ SFG–MD (2) , both of which correlate up to ∼35 Å with the spectral observations of increasing and then saturating intensities, suggesting that both ion stratification and interfacial depth determine the water orientations at an air–water interface of 1-3 electrolyte solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strong stretching theory for pH-responsive polyelectrolyte brushes in large salt concentrations

Here, we develop a theory for describing the thermodynamics, configuration, and electrostatics of strongly-stretched, pH-responsive polyelectrolyte (PE) brushes in the presence of large salt concentrations. The aim of the paper, therefore, is to study the properties of a PE brush in a salt concentration regime (namely, large concentrations of several molars) that has been hitherto unexplored theoretically in the context of PE brushes but can be routinely encountered in molecular scale simulations of the problem. The brushes are modelled using our recently developed augmented Strong Stretching Theory (SST), while the effect of the presence of the large salt concentration is accounted for by including the contributions of three different types of non-Poisson–Boltzmann (non-PB) effects to the free energy description of the PE brush induced electric double layer (EDL). These non-PB effects are ionic non-mean-field ion–ion correlations, solvent polarization, and the finite size effect of the ions and water dipoles. We study the individual influences of these different effects and show that the ion–ion correlations and solvent polarization effect reduce the brush height which consequently enhances the monomer density and leads to an electrostatic potential distribution of the brush induced EDL that has a larger magnitude at near-wall locations and becomes zero at shorter distances from the wall. The finite size effect, on the other hand, increases the brush height and therefore, weakens the monomer density and leads to a smaller near-wall magnitude of the EDL potential that becomes zero at larger distances from the wall. In time, we consider the impact of all the three non-PB effects simultaneously and show that the ion–ion correlations and solvent polarization effect dominate the size effects and dictate the overall brush configuration and the EDL electrostatics. We also point out that the influence of all the three non-PB effects becomes the largest for a larger salt concentration and a smaller bulk pH. Finally, we compare our theoretical predictions with those obtained from our recently developed all-atom MD simulation model and obtain an excellent match.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into controlling bacterial cellulose nanofiber film properties through balancing thermodynamic interactions and colloidal dynamics

In recent years, nanocellulose has emerged as a sustainable and environmentally friendly alternative to traditional petroleum-derived structural polymers. Sourced either from plants, algae, or bacteria, nanocellulose can be processed into colloid, gel, film and fiber forms. However, the required fundamental understanding of process parameters that govern the morphology and structure–property relationships of nanocellulose systems, from colloidal suspensions to bulk materials, has not been developed and generalized for all forms of cellulose. This further hinders the more widespread adoption of this biopolymer in applications. Our study investigates the dispersion of cellulose nanofibers (CNFs) produced by a bacterial–yeast co-culture, in solvents, highlighting the role of thermodynamic interactions in influencing their colloidal behavior. By adjusting Hansen solubility parameters, we controlled the thermodynamic relationship between CNFs and solvents across various concentrations, studying the dilute to semi-dilute regimes. Rheological measurements revealed that the threshold at which a concentration-based regime transition occurs is distinctly solvent-dependent. Complementing rheological analysis with small angle X-ray scattering and zeta potential measurements, our findings reveal that enhancing CNF–solvent interactions increases excluded volume in the dilute regime, emphasizing the importance of the balance between fiber–fiber and fiber–solvent interactions. Moreover, we investigated the transition from colloidal to solid state by creating films from dispersions with varying interaction parameters in semi-dilute regimes. Through mechanical testing and scanning electron microscopy imaging of the fracture surfaces, we highlight the significance of electrokinetic effects in such transitions, as dispersions with higher electrokinetic stabilization gave rise to stronger and tougher films despite having less favorable thermodynamic interaction parameters. Finally, our work provides insights into the thermodynamic and electrokinetic interplay that governs bacterial CNF dispersion, offering a foundation for future application and a deeper understanding of nanocellulose's colloidal and structure-property relationships.

59 BASIC BIOLOGICAL SCIENCES↗

Combustion synthesis of Eu 2 O 3 nanomaterials with tunable phase composition and morphology

Combustion reactions in europium nitrate – acetylacetone – 2-methoxyethanol solutions and gels were investigated to produce europium (III) oxide (Eu 2 O 3 ) nanocrystalline materials and thin films. Thermal analyses of solutions indicated that the 2-methoxyethanol solvent also acts as a fuel in the absence of acetylacetone. Adding acetylacetone increases the overall heat of the reaction. Thermal analysis results revealed that the slow oxidation of unburned hydrocarbon residues follows the primary combustion reaction. Time-temperature profile measurements of the bulk combustion synthesis process in air and nitrogen atmospheres enabled the extraction of the maximum reaction temperature and the heating and cooling rates in the combustion zone. Several direct correlations exist between measured combustion parameters and the phase composition of the products. Combustion in air results in mixed-phase cubic and monoclinic nanocrystalline Eu 2 O 3 . Increasing the acetylacetone concentration in solutions increases the synthesis temperature and decreases the quantity of cubic Eu 2 O 3 . Here, the reaction of solutions in a nitrogen atmosphere or diluted with Eu 2 O 3 provides control of the product phase composition and reduces the quantity of the monoclinic phase. Transmission electron microscopy imaging shows that the Eu 2 O 3 end products are highly porous aggregates of nanocrystalline particles. Electrospraying of reactive solutions onto different substrates followed by short annealing makes the preparation of Eu 2 O 3 materials with diverse morphologies possible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast and Controllable Phase Evolution by Flash Joule Heating

Flash Joule heating (FJH), an advanced material synthesis technique, has been used for the production of high-quality carbon materials. Direct current discharge through the precursors by large capacitors has successfully converted carbon-based starting materials into bulk quantities of turbostratic graphene by the FJH process. However, the formation of other carbon allotropes, such as nanodiamonds and concentric carbon materials, as well as the covalent functionalization of different carbon allotropes by the FJH process, remains challenging. Here, we report the solvent-free FJH synthesis of three different fluorinated carbon allotropes: fluorinated nanodiamonds, fluorinated turbostratic graphene and fluorinated concentric carbon. This is done by millisecond flashing of organic fluorine compounds and fluoride precursors. Spectroscopic analysis confirms the modification of the electronic states and the existence of various short-range and long-range orders in the different fluorinated carbon allotropes. As a result, the flash time-dependent relationship is further demonstrated to control the phase evolution and product compositions.

01 COAL, LIGNITE, AND PEAT↗

RESULTS OF ROUTINE STRIP EFFLUENT HOLD TANK AND DECONTAMINATED SALT SOLUTION HOLD TANK SAMPLES FROM MODULAR CAUSTIC-SIDE SOLVENT EXTRACTION UNIT DURING MACROBATCH 3 OPERATIONS

Strip Effluent Hold Tank (SEHT) and Decontaminated Salt Solution Hold Tank (DSSHT) samples from several of the 'microbatches' of Integrated Salt Disposition Project (ISDP) Salt Batch ('Macrobatch') 3 have been analyzed for {sup 238}Pu, {sup 90}Sr, {sup 137}Cs, and by Inductively Coupled Plasma Emission Spectroscopy (ICPES). The results indicate good decontamination performance within process design expectations. While the data set is sparse, the results of this set and the previous set of results for Macrobatch 3 samples indicate consistent operations. However, the Decontamination Factors for plutonium and strontium removal have declined in Macrobatch 3, compared to Macrobatch 2. This may be due to the differences in the Pu concentration or the bulk chemical concentrations in the feed material. SRNL is considering the possible reasons for this decline. The DSSHT samples show continued presence of titanium, likely from leaching of the monosodium titanate in ARP. During operation of the ISDP, quantities of salt waste are processed through the Actinide Removal Process (ARP) and MCU in batches of {approx}3800 gallons. Monosodium titanate (MST) is used in ARP to adsorb actinides and strontium from the salt waste and the waste slurry is then filtered prior to sending the clarified salt solution to MCU. The MCU uses solvent extraction technology to extract cesium from salt waste and concentrate cesium in an acidic aqueous stream (Strip Effluent - SE), leaving a decontaminated caustic salt aqueous stream (Decontaminated Salt Solution - DSS). Sampling occurs in the Decontaminated Salt Solution Hold Tank (DSSHT) and Strip Effluent Hold Tank (SEHT) in the MCU process. The MCU sample plan requires that batches be sampled and analyzed for plutonium and strontium content by Savannah River National Lab (SRNL) to determine MST effectiveness. The cesium measurement is used to monitor cesium removal effectiveness and the inductively coupled plasma emission spectroscopy (ICPES) is used to monitor inorganic carryover.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Understanding the Role of Complexation in the Charge-Transfer Kinetics of the Cu 2+ + e ↔ Cu 1+ Redox Reaction in Ethaline Deep Eutectic Solvent

Deep eutectic solvent (DES) based electrolytes are gaining attention for electrochemical applications. As such, knowledge of the charge transfer kinetics in DES and its dependence on electrolyte composition and temperature is important. Using Cu 2+ + e ↔ Cu 1+ as a model system, we demonstrate that metal redox reactions in chloride-containing DES media suffer from sluggish charge transfer kinetics. The exchange current density, i 0 , displayed a peculiar inverse relationship with the bulk chloride concentration, [Cl – ] b . The i 0 decreased from 7.9 to 3.0 mA/cm 2 when [Cl – ] b increased from 2.8 to 4.6 M at 30°C. Such dependence is shown to originate from Cl – complexation with reactant and product species. Furthermore, i 0 increased with an increase in Cu n + bulk concentration in the 50–200 mM range. Also, increase in temperature elevated i 0 . The charge transfer coefficient α c , however, remained constant (~0.5) and was unaffected by Cu n + or Cl – concentrations or by temperature. To explain how charge transfer kinetics depend on the various system parameters, a model incorporating complexation phenomena was developed and its predictions were compared to experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal growth and characterization of the pyrochlore Er 2 Ti 2 O 7

Pyrochlore erbium titanate samples in the form of powders (with nominal compositions of Er 2 Ti 2+ x O 7 , -0.08 ≤ x ≤ 0.08) and bulk single crystals were prepared to elucidate the effect of synthesis and growth conditions on their composition, structure, and transition temperature. All the samples were characterized using X-ray diffraction and specific heat measurements. Larger lattice parameters were measured for Ti-deficient stuffed powders, Er 2 (Ti 2- x Er x )O 7- δ , while Ti-rich anti-stuffed powders, (Er 2- x Ti x )Ti 2 O 7+ δ , showed a decrease in the lattice parameter. The lattice parameter for the stoichiometrically synthesized powder, Er 2 Ti 2 O 7 , was measured to be a = 10.07522(9) Å. Single crystals grown by the conventional floating zone (FZ) technique were Ti deficient (stuffed) and darker in color due to oxygen vacancies. Using the traveling solvent floating zone (TSFZ) method, a high structural quality, transparent and stoichiometric Er 2 Ti 2 O 7 single crystal was grown at a lower temperature using the TiO 2 solvent. The heat capacity measurements of the TSFZ grown Er 2 Ti 2 O 7 crystal and stoichiometric powder exhibited a very close magnetic transition temperature T c of ~1.23 K that was suppressed in off-stoichiometric samples, demonstrating correlations between the stoichiometry and ground state magnetism in Er 2 Ti 2 O 7 .

optics, thermal conductivity, defects, charge tran↗

Polarization Control via He-Ion Beam Induced Nanofabrication in Layered Ferroelectric Semiconductors

Rapid advanced in nanoscience rely on continuous improvements of matter manipulation at near atomic scales. Currently, well characterized, robust, resist-based lithography carries the brunt of the nanofabrication process. However, use of local electron, ion and physical probe methods is also expanding, driven largely by their ability to fabricate without the multi-step preparation processes that can result in contamination from resists and solvents. Furthermore, probe based methods extend beyond nanofabrication to nanomanipulation and imaging, vital ingredients to rapid transition to prototyping and testing of layered 2D heterostructured devices. In this work we demonstrate that helium ion interaction, in a Helium Ion Microscope (HIM), with the surface of bulk copper indium thiophosphate CuM III P 2 X 6 (M = Cr, In; X= S, Se), (CITP) results in the control of ferroelectric domains, and growth of cylindrical nanostructures with enhanced conductivity; with material volumes scaling with the dosage of the beam. The nanostructures are oxygen rich, sulfur poor, and with the copper concentration virtually unchanged as confirmed by Energy Dispersive X-ray (EDX). Scanning Electron Microscopy (SEM) imaging contrast as well as Scanning Microwave Microscopy (SMM) measurements suggest enhanced conductivity in the formed particle, whereas Atomic Force Microscopy (AFM) measurements indicate that the produced structures have lower dissipation and a lower Young s modulus.

2D crystals↗

Elucidating the Role of Interfacial Materials Properties in Microfluidic Packages

The purpose of this work was to discover a method to investigate the properties of interfaces as described by a numerical physical model. The model used was adopted from literature and applied to a commercially available multiphysics software package. By doing this the internal properties of simple structures could be elucidated and then readily applied to more complex structures such as valves and pumps in laminate microfluidic structures. A numerical finite element multi-scale model of a cohesive interface comprised of heterogeneous material properties was used to elucidate irreversible damage from applied strain energy. An unknown internal state variable was applied to characterize the damage process. Using a constrained blister test, this unknown internal state variable could be determined for an adherend/adhesive/adherend body. This is particularly interesting for laminate systems with microfluidic and microstructures contained within the body. A laminate structure was designed and fabricated that could accommodate a variety of binary systems joined using nearly any technique such as adhesive, welding (solvent, laser, ultrasonic, RF, etc.), or thermal. The adhesive method was the most successful and easy to implement but also one of the more difficult to understand, especially over long periods of time. Welding methods are meant to achieve a bond that is similar to bulk properties and so are easier to predict. However, methods of welding often produce defects in the bonds.. Examples of the test structures used to elucidate the internal properties of the model were shown and demonstrated. The real life examples used this research to improve upon current designs and aided in creating complex structures for sensor and other applications.

Edwards, Thayne L.↗

Nanoconfinement of Molecular Magnesium Borohydride Captured in a Bipyridine-Functionalized Metal-Organic Framework

The lower limit of metal hydride nanoconfinement is demonstrated through the coordination of a molecular hydride species to binding sites inside the pores of a metal-organic framework (MOF). Magnesium borohydride, which has a high hydrogen capacity, is incorporated into the pores of UiO-67bpy (Zr6O4(OH)4(bpydc)6 with bpydc2- = 2,2'-bipyridine-5,5'- dicarboxylate) by solvent impregnation. The MOF retained its long-range order, and transmission electron microscopy and elemental mapping confirmed the retention of the crystal morphology and revealed a homogeneous distribution of the hydride within the MOF host. Notably, the B-, N-, and Mg-edge XAS data confirm the coordination of Mg(II) to the N atoms of the chelating bipyridine groups. In situ 11B MAS NMR studies helped elucidate the reaction mechanism and revealed that complete hydrogen release from Mg(BH4)2 occurs as low as 200 °C. Sieverts and thermogravimetric measurements indicate an increase in the rate of hydrogen release, with the onset of hydrogen desorption as low as 120 °C, which is approximately 150 °C lower than that of the bulk material. Furthermore, density functional theory calculations support the improved dehydrogenation properties and confirm the drastically lower activation energy for B-H bond dissociation.

Nanoconfinement, Metal Hydrides, Metal-Organic Fra↗