Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Description and availability of airborne Doppler radar data

An airborne, forward-looking, pulse, Doppler radar has been developed in conjunction with the joint FAA/NASA Wind Shear Program. This radar represents a first in an emerging technology. The radar was developed to assess the applicability of an airborne radar to detect low altitude hazardous wind shears for civil aviation applications. Such a radar must be capable of looking down into the ground clutter environment and extracting wind estimates from relatively low reflectivity weather targets. These weather targets often have reflectivities several orders of magnitude lower than the surrounding ground clutter. The NASA radar design incorporates numerous technological and engineering achievements in order to accomplish this task. The basic R/T unit evolved from a standard Collins 708 weather radar, which supports specific pulse widths of 1-7 microns and Pulse Repetition Frequencies (PRF) of less than 1-10 kHz. It was modified to allow for the output of the first IF signal, which fed a NASA developed receiver/detector subsystem. The NASA receiver incorporated a distributed, high-speed digital attenuator, producing a range bin to range bin automatic gain control system with 65 dB of dynamic range. Using group speed information supplied by the aircraft's navigation system, the radar signal is frequency demodulated back to base band (zero Doppler relative to stationary ground). The In-phase & Quadrature-phase (I/Q) components of the measured voltage signal are then digitized by a 12-bit A-D converter (producing an additional 36 dB of dynamic range). The raw I/Q signal for each range bin is then recorded (along with the current radar & aircraft state parameters) by a high-speed Kodak tape recorder.

Harrah, S. D.↗

Atomic and molecular data for space astronomy - Needs, analysis, and availability; 21st IAU General Assembly, Buenos Aires, Argentina, July 23-Aug. 1, 1991, Selected Papers

The present volume on atomic and molecular spectroscopic data for space astrophysics discusses scientific problems and laboratory data needs associated with the Hubble Space Telescope, atomic data needed for far ultraviolet astronomy with HUT and FUSE and for analysis of EUV and X-ray spectra, and data for observations of interstellar medium with the Hubble Space Telescope. Attention is also given to atomic and molecular data for analysis of IR spectra from ISO and SIRTF, atomic data from the opacity project, sources of atomic spectroscopic data for astrophysics, and summary of current molecular data bases.

Smith, Peter L.↗

JPL Physical Oceanography Distributed Active Archive Center (PO.DAAC) data availability, version 1-94

The Physical Oceanography Distributed Active Archive Center (PO.DAAC) archive at the Jet Propulsion Laboratory (JPL) includes satellite data sets for the ocean sciences and global-change research to facilitate multidisciplinary use of satellite ocean data. Parameters include sea-surface height, surface-wind vector, sea-surface temperature, atmospheric liquid water, and integrated water vapor. The JPL PO.DAAC is an element of the Earth Observing System Data and Information System (EOSDIS) and is the United States distribution site for Ocean Topography Experiment (TOPEX)/POSEIDON data and metadata.

Source record↗

Mode shape analysis using a commercially available peak store video frame buffer

Time exposure photography, sometimes coupled with strobe illumination, is an accepted method for motion analysis that bypasses frame by frame analysis and resynthesis of data. Garden variety video cameras can now exploit this technique using a unique frame buffer that is a non-integrating memory that compares incoming data with that already stored. The device continuously outputs an analog video signal of the stored contents which can then be redigitized and analyzed using conventional equipment. Historically, photographic time exposures have been used to record the displacement envelope of harmonically oscillating structures to show mode shape. Mode shape analysis is crucial, for example, in aeroelastic testing of wind tunnel models. Aerodynamic, inertial, and elastic forces can couple together leading to catastrophic failure of a poorly designed aircraft. This paper will explore the usefulness of the peak store device as a videometric tool and in particular discuss methods for analyzing a targeted vibrating plate using the 'peak store' in conjunction with calibration methods familiar to the close-range videometry community. Results for the first three normal modes will be presented.

Snow, Walter L.↗

RAID-S Technical Overview: Raid 4 and 5-Compliant Hardware and Software Functionality Improves Data Availability Through Use of XOR-Capable Disks in an Integrated Cached Disk Array

The purpose of this paper is to provide a technical description of redundant array of independent disks - Symmetrix (RAID-S). It is intended to give the reader an understanding of how RAID-S is architected and implemented in the EMC Symmetrix 3000/5000 series integrated cached disk array. Topics include RAID-S taxonomy, configuration considerations, operational characteristics, performance, and implementation guidelines.

Quinn, Brett↗

Announcing the Availability of the MIT SMASS and SMASSIR Data Sets

We announce the release of visible and near-infrared reflectance spectroscopy measurements for nearly 2000 asteroids obtained by the MIT Small Main-Belt Asteroid Spectroscopic Survey (SMASS) program. Data are being released via http://smass.mit.edu. Additional information is contained in the original extended abstract.

Binzel, R. P.↗

GSSR Mars Delay-Doppler Data Available for MER Landing Site Assessment

Goldstone Solar System Radar (GSSR) observation of Mars made over the past 10 years are tabulated. Some of these are two station interferometric data that can now be processed using Mars Orbiter Laser Altimeter (MOLA) aided altimetry to provide North/South separation and higher resolution. New 2001 observations are targeted at Mars Exploration Rover (MER) sites. Additional information is contained in the original extended abstract.

Jurgens, R. F.↗

Resources Available for Hazards Analysis of Aerospace Fluids

In recent years, the legislative and executive branches of the federal government have pushed to make government more efficient and responsive to the needs of the marketplace. One of these initiatives, Public Law 104-113, also known as the National Technology Transfer and Advancement Act of 1995 (NTTAA), is designed to accelerate technology transfer to industry and promote government-industry partnership. Summarized, NTTAA states that '... all Federal agencies and departments shall use technical standards that are developed or adopted by voluntary consensus standards bodies, using such technical standards as a means to carry out policy objectives or activities determined by the agencies and departments. Government agencies must now determine if their in-house requirement-setting activities are sufficiently unique that no public interest is served by having them adopted by a voluntary consensus organization (VCO), or if not, to use or develop voluntary consensus standards. The Office of Management and Budget (OMB) is chartered by the law to monitor federal agency progress and report the results to Congress. In response to NTTAA, agency-wide oxygen and hydrogen safety standards sponsored by the NASA Headquarters (HQ) Office of Safety and Mission Assurance (OSMA) were obvious choices for early adoption by VCOs. In 1996, HQ sought assistance from the Johnson Space Center (JSC) White Sands Test Facility (WSTF), the technical lead for development of these safety standards, to evaluate their adoption by VCOs. At that time, WSTF-developed propellant hazards manuals were likewise identified for possible VCO adoption. Subsequently, WSTF was asked to represent NASA for development of an international ISO safety standard for hydrogen use. Concurrent with these WSTF standards activities are related efforts to develop and publish propellant hazards analysis protocols and safety courses for the industrial, propellant use of oxygen, hydrogen, and hypergols. This paper reports on these efforts and describes WSTF's overall voluntary consensus standards program to coordinate the interchange of NASA's propellant hazards and safety information with industry.

Woods, S. S.↗