Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic ordering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Bandgap recovery of monolayer MoS 2 using defect engineering and chemical doping

Two-dimensional transition metal dichalcogenide materials have created avenues for exciting physics with unique electronic and photonic applications. Among these materials, molybdenum disulfide is the most known due to extensive research in understanding its electronic and optical properties. In this paper, we report on the successful growth and modification of monolayer MoS 2 (1L MoS 2 ) by controlling carrier concentration and manipulating bandgap in order to improve the efficiency of light emission. Atomic size MoS 2 vacancies were created using a Helium Ion Microscope, then the defect sites were doped with 2,3,5,6-tetrafluro7,7,8,8-tetracyanoquinodimethane (F4TCNQ). The carrier concentration in intrinsic (as-grown) and engineered 1L MoS 2 was calculated using Mass Action model. The results are in a good agreement with Raman and photoluminescence spectroscopy as well as Kelvin probe force microscopy characterizations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Simulations of tokamak edge plasma turbulent fluctuations based on a minimal 3D model

In this study, a new simulation model for tokamak boundary plasma, SOLT3D, is implemented in the BOUT++ framework. The simulation model includes a set of dynamic equations describing collisional boundary plasma and neutral gas in the tokamak scrape-off layer and divertor region. The model is verified against standard linear plasma instabilities and available nonlinear results. For L-mode like conditions, SOLT3D reproduces characteristics of boundary plasma turbulent fluctuations that are similar to published experimental data, in terms of the amplitude and spatial dependence of the fluctuations. It also reproduces realistic plasma fluxes on material surfaces and expected Bohm-like effective radial transport. Plasma fluctuations inferred from the simulations imply inevitably a significant level of intrinsic 'noise' for axisymmetric tokamak plasma transport modeling, introducing errors on the order of unity. In particular, the toroidally averaged atomic rates below 5–10 eV are strongly modified by turbulent plasma fluctuations, which should significantly affect the standard axisymmetric modeling of the tokamak edge plasma and divertor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Structure of Charge Density Waves in La1.875Ba0.125CuO4

Although charge-density wave (CDW) correlations exist in several families of cuprate superconductors, they exhibit substantial variation in CDW wavevector and correlation length, indicating a key role for CDW-lattice interactions. We investigated this interaction in La1.875Ba0.125CuO4 using single crystal x-ray diffraction to collect a large number of CDW peak intensities, and determined the Cu and La/Ba atomic distortions induced by the formation of CDW order. Within the CuO2 planes, the distortions involve a periodic modulation of the Cu-Cu spacing along the direction of the ordering wave vector. The charge ordering within the copper-oxygen layer induces an out-of-plane breathing modulation of the surrounding lanthanum layers, which leads to a related distortion on the adjacent copper-oxygen layer. Our result implies that the CDW-related structural distortions do not remain confined to a single layer but rather propagate an appreciable distance through the crystal. This leads to overlapping structural modulations, in which CuO2 planes exhibit distortions arising from the orthogonal CDWs in adjacent layers as well as distortions from the CDW within the layer itself. We attribute this striking effect to the weak c-axis charge screening in cuprates and suggest this effect could help couple the CDW between adjacent planes in the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Subsurface cosmogenic and radiogenic production of 42 Ar

Radioactive decays from 42 Ar and its progeny 42 K are potential background sources in large-scale liquid-argon-based neutrino and dark matter experiments. In the atmosphere, 42 Ar is produced primarily by cosmogenic activation on 40 Ar. The use of low radioactivity argon from cosmogenically shielded underground sources can expand the reach and sensitivity of liquid-argon-based rare event searches. We estimate 42 Ar production underground by nuclear reactions induced by natural radioactivity and cosmic-ray muon-induced interactions. At 3,000 mwe, 42 Ar production rate is 1.8×10 -3 atoms per ton of crust per year, 7 orders of magnitude smaller than the 39 Ar production rate at a similar depth in the crust. In conclusion, by comparing the calculated production rate of 42 Ar to that of 39 Ar for which the concentration has been measured in an underground gas sample, we estimate the activity of 42 Ar in gas extracted from 3,000 mwe depth to be less than two decays per ton of argon per year.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Soft crystal martensites: An in situ resonant soft x-ray scattering study of a liquid crystal martensitic transformation

Liquid crystal blue phases (BPs) are three-dimensional soft crystals with unit cell sizes orders of magnitude larger than those of classic, atomic crystals. The directed self-assembly of BPs on chemically patterned surfaces uniquely enables detailed in situ resonant soft x-ray scattering measurements of martensitic phase transformations in these systems. The formation of twin lamellae is explicitly identified during the BPII-to-BPI transformation, further corroborating the martensitic nature of this transformation and broadening the analogy between soft and atomic crystal diffusionless phase transformations to include their strain-release mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Conversion of CO 2 into Synthetic Graphite

Carbon Dioxide (CO 2 ) can be utilized as a source for producing synthetic graphite. Our method converts CO 2 into solid carbon. These CO 2 -sourced solid carbon have an anisotropic property that allow them to be graphitized into synthetic graphite. Our patented thermal catalytic process uses carbon dioxide and hydrogen as the feedstocks for the reaction, producing solid carbon material, with distilled water as the sole byproduct. The process is designed as a closed loop, where all feedstock gases entering the reactor are converted into durable bulk carbons and water, with no emissions. These carbons materials can be sintered into a solid structure and then thermally annealed, taking the carbon atoms from a disordered state to a highly ordered state of graphitic material – producing synthetic graphite structures. Phase 1 will prove that these bulk carbons can be sintered into a machinable solid carbon structure, which will then be annealed into a fully graphitic solid structure. Standard analytics will be done to verify the extent of graphitization (Raman, XRD). Proving this CO 2 -sourced carbon pathway to synthetic graphite structures will give the US a domestic supply route for this critical material and remove reliance on foreign sources. In addition, since the synthetic graphite structure is made from CO 2 -sourced carbon, this is also a method to mitigate CO 2 . Graphite structures are used in high temperature and high friction applications, for example, as anodes for steel refining, for brake pad linings, as neutron reflectors in nuclear reactors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis and characterization of properties of (Tb1/3Mo2/3)2AlC polycrystalline

When molecules, atoms, or ions are grouped in a highly ordered microscopic structure to form a crystal lattice that stretches in all directions, the result is a solid material known as a crystal or crystalline solid. They are arranged in a highly ordered microscopic structure to form a crystal lattice. The smallest group of particles in material that constitutes this repeating pattern is unit cell of the structure. The unit cell is a repeating unit formed by the vectors spanning the points of a lattice.

Bretana, Alex↗
DOE OSTI2024

A Simulation Study of Quantum Clock Synchronization Using Teleportation

An important requirement in implementing distributed computing and sensing application is the synchronization of clocks at various locations. The Internet relies on the Network Time Protocol (NTP), which synchronizes clocks with accuracy in the order of milliseconds. More recently an ensemble of atomic clocks is used for navigation based on GPS. These clocks are highly accurate and provide time with very low uncertainty. Even so, many physics experiments such as distributed LIGO-based systems may require more accurate clock synchronization that is achievable using quantum entanglement. This requires the deployment of a network of quantum clocks synchronized by exploiting entangled atomic clock qubits. In this paper, we carry out a simulation study of synchronizing a network of quantum clocks interconnected by a fiber plant that supports the ESnet; the latter is used to support the classical communication needed for teleportation. We consider an existing protocol for synchro-nizing the atomic clock qubits that relies on the GHZ states. To assess the performance of the protocol we developed a discrete-event simulation of the network using IBM Qiskit framework for underlying quantum gate operations and measurements. The simulation results shed light on the resources required in terms of the number entangled qubits and the time needed to achieve the synchronization of different number of nodes in ESnet.

Kiran, Mariam↗
DOE OSTI2022

Direct current in a stirred optical lattice

We study how the energy dispersion of bosonic atoms loaded into an optical lattice becomes modified due to periodic circular stirring of the lattice to the second order in the strength of stirring. If the lattice breaks mirror symmetry, the bosonic atoms may acquire a nonzero group velocity at the center of the Brillouin zone and produce a nonzero direct current. Furthermore, this effect is similar to the circular photogalvanic effect in solid-state physics. It can be used to transport neutral bosonic atoms in an optical lattice over a given distance in an arbitrary direction. However, when the drive frequency is detuned to avoid resonant transitions with energy absorption, we argue that the induced current is not persistent, but transient. An experimental study of the relaxation of the induced current can provide insight about equilibrization in driven systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Thermodynamic stability of a spin microemulsion in Rashba spin-orbit-coupled bosons

Recent finite-temperature numerical simulations have unveiled a quantum “spin” microemulsion analog, found by raising the temperature of a stripe supersolid phase in a Rashba spin-orbit coupled Bose gas. This microemulsion state is a highly correlated, isotropic normal fluid where atoms self-arrange based on their internal pseudospin into patterns that resemble bicontinuous microemulsions. This finding leaves several open questions regarding the broader accessibility of this phase in experiments. Here, we use equilibrium finite-temperature numerical simulations based on a coherent-state path integral representation to perform a computational investigation into the thermodynamic stability of the spin microemulsion state. Numerical simulations emphasize the requirement of a nearly, but not perfectly, isotropic spin-orbit coupling in order to achieve the microemulsion phase in cold-atom experiments. Moreover, the microemulsion state exists independent of miscibility of the pseudospin components and for a wide range of pseudospin population imbalance, suggesting a high degree of flexibility in choosing the atom and hyperfine states in an experimental realization. Lastly, we demonstrate this feasibility by mimicking a Rashba spin-orbit-coupled 87 Rb experiment in an isotropic harmonic trap, where we confirm the microemulsion's existence via its density profile and equilibrium quasimomentum distribution.

Complex Langevin dynamics↗
DOE OSTI2020

Improving the picture of atomic structure in nonoriented polymer domains using the pair distribution function: A study of polyamide 6

Abstract Investigations of the atomic structures within polyamides started over 80 years ago and continue today. These weakly ordered materials diffract X‐rays poorly and typically require postprocessing to obtain idealized samples for structural studies. An important goal remains to develop techniques to study the local structure in its natural state, with atomic resolution, and with sensitivity to subtle changes due to synthesis conditions or other technologically relevant processing procedures. Here, we compare the structures of as‐produced, nonoriented polyamide 6 ([C 6 H 11 NO] n ) from both hydrolytic and anionic processes. A total scattering pair distribution function approach is used to elucidate information about the atomic bonding, molecular conformation, chain packing, crystallite size, and ratio of ordered to disordered domain content. The results are compared with those from standard analytical methods.

Terban, Maxwell W.↗
DOE OSTI2026

High-fidelity entanglement and coherent multi-qubit mapping in an atom array

Neutral atoms in optical tweezer arrays possess broad applicability for quantum technologies, such as computing, analogue simulation and metrology. The atomic species ytterbium-171 is able to host multiple types of qubits, making it a strong candidate for bridging various applications of tweezer arrays. Realizing this potential requires high-fidelity generation and transfer of many-body entanglement between these distinct qubit degrees of freedom. Here, in this study, we demonstrate the creation and coherent mapping of entangled quantum states across multiple qubits in ytterbium-171 tweezer arrays. We map entangled states onto the optical clock qubit from the nuclear spin qubit or the Rydberg qubit. We coherently transfer Z 2 -ordered Greenberger–Horne–Zeilinger states of up to 20 atoms from the interacting Rydberg manifold to the metastable nuclear spin manifold. Furthermore, we find that clock-qubit-based spin detection, when applied to Rydberg and nuclear spin qubits, facilitates atom-loss-detectable qubit measurements and Rydberg decay detection. This enables delayed-erasure detection, yielding an error-detected two-qubit gate fidelity of 99.78(4)% in metastable qubits. These results establish a versatile architecture that advances multiple fields of quantum information science while also establishing bridges between them.

Senoo, Aruku [University of Colorado, Boulder, CO ↗
DOE OSTI2024

NO Reduction with CO on Low‐loaded Platinum‐group Metals (Rh, Ru, Pd, Pt, and Ir) Atomically Dispersed on Ceria

Abstract Low‐loaded platinum‐group single‐atom catalysts on CeO 2 (M 1 /CeO 2 ) were synthesized via high‐temperature atom trapping (AT) and tested for the NO+CO reaction under dry and wet conditions. The activity of these catalysts for NO+CO reaction follows the order Rh>Pd≈Ru>Pt>Ir. For Rh, Ru, and Pd single‐atom catalysts, the N 2 O byproduct is formed but not clearly observed in Ir and Pt cases, which may result from the higher reaction temperature (>200 °C) required for Pt and Ir catalysts. The presence of water can promote the activity of these M 1 /CeO 2 catalysts for the NO+CO reaction. Under wet conditions, significant NH 3 formation occurred during the reaction, which is due to the co‐existence of water‐gas‐shift reaction on these catalysts. Compared with Pt, Pd and Ir, the Rh and Ru single‐atom catalysts show higher selectivity to NH 3 species, resulting from the hydride species on the surface. Among all tested catalysts, Ru 1 /CeO 2 shows the highest production of ammonia and highest CO conversion due to excellent water‐gas‐shift activity, whereas Pd 1 /CeO 2 shows lowest ammonia production. Rh 1 /CeO 2 shows the best low temperature NO reduction activity among all tested catalysts.

Tian, Jinshu↗
DOE OSTI2021

Bond order predictions using deep neural networks

Machine learning is an extremely powerful tool for the modern theoretical chemist since it provides a method for bypassing costly algorithms for solving the Schrödinger equation. Already, it has proven able to infer molecular and atomic properties such as charges, enthalpies, dipoles, excited state energies, and others. Most of these machine learning algorithms proceed by inferring properties of individual atoms, even breaking down total molecular energy into individual atomic contributions. In this paper, we introduce a modified version of the Hierarchically Interacting Particle Neural Network (HIP-NN) capable of making predictions on the bonds between atoms rather than on the atoms themselves. We train the modified HIP-NN to infer bond orders for a large number of small organic molecules as computed via the Natural Bond Orbital package. We demonstrate that the trained model is extensible to molecules much larger than those in the training set by studying its performance on the COMP6 dataset. This method has applications in cheminformatics and force field parameterization and opens a promising future for machine learning models to predict other quantities that are defined between atoms such as density matrix elements, Hamiltonian parameters, and molecular reactivities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

High- χ diblock copolymers containing poly(vinylpyridine- N -oxide) segments

Block copolymers exhibiting an enhanced segregation strength due to an underlying high Flory–Huggins interaction parameter (high χ) have attracted considerable attention because of their potential of forming microphase-separated domains with very small feature sizes (<10 nm) useful for next-generation lithography. Here, we report the synthesis, characterization, and self-assembly of poly(styrene)- block -poly(2-vinylpyridine N -oxide) (PS- b -P2VPNO) and poly(styrene)- block -poly(4-vinylpyridine N -oxide) (PS- b -P4VPNO) block copolymers. These PS- b -PVPNOs were obtained from the oxidation of their precursors, poly(styrene)- block -poly(2-vinylpyridine) (PS- b -P2VP) and poly(styrene)- block -poly(4-vinylpyridine) (PS- b -P4VP), respectively. The PS- b -PVPNOs exhibit an enhanced segregation as revealed by ordered cylindrical and lamellar structures in the sub-10 nm scale from copolymers with relatively low molecular weight. The morphologies and periodicities of the ordered structures were determined by small-angle X-ray scattering, while atomic-force microscopy was used to image the self-assembly in thin films. Estimates of the changes in disorder–order transition temperature and domain spacing are derived from a theory based on the effects of dipolar interactions. All the experimentally observed morphological changes resulting from the oxidation of P2VP and P4VP precursors can be qualitatively explained in terms of an increased dipole moment of vinylpyridine N -oxide segments. Therefore, our results demonstrate that PVPNO based block copolymers are versatile candidates toward nanopatterned structures with small feature sizes critical for the future microelectronics industry and beyond.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Transport coefficients for magnetic-field evolution in inviscid magnetohydrodynamics

The magnetized resistivity and electrothermal tensors when substituted into the induction equation lead to electrothermal magnetic field generation, resistive magnetic diffusion, and magnetic field advection due to resistivity gradients, temperature gradients and currents. Here, the advection terms driven by temperature gradient and current have cross-field components (perpendicular to both the magnetic field and the driving term) that depend on significantly modified versions of Braginskii’s transport coefficients. The improved fits to Braginskii’s coefficients given by Epperlein and Haines and Ji and Held give physically incorrect results for cross-field advection at small Hall parameters (product of cyclotron frequency and collision time). The errors in Epperlein and Haines’ fits are particularly severe, giving increasing advection velocities below a Hall parameter of one when they should decrease linearly to zero. Epperlein and Haines’ fits can also give erroneous advection terms due to variations in effective atomic number. The only serious error in Braginskii’s fits is an overestimate in advection due to perpendicular resistivity. New fits for the cross-field advection terms are obtained from a direct numerical solution of the Fokker-Planck equation and Ji and Held’s higher order expansion approach that are continuous functions of the effective atomic number.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Origin of medium-range atomic correlation in simple liquids: Density wave theory

The atomic pair-distribution function of simple liquid and glass shows exponentially decaying oscillations beyond the first peak, representing the medium-range order (MRO). The structural coherence length that characterizes the exponential decay increases with decreasing temperature and freezes at the glass transition. Conventionally, the structure of liquid and glass is elucidated by focusing on a center atom and its neighboring atom shell characterized by the short-range order (SRO) and describing the global structure in terms of overlapping local clusters of atoms as building units. However, this local bottom-up approach fails to explain the strong drive to form the MRO, which is different in nature from the SRO. We propose to add an alternative top-down approach based upon the density wave theory. In this approach, one starts with a high-density gas state and seeks to minimize the global potential energy in reciprocal space through density waves using the pseudopotential. The local bottom-up and global top-down driving forces are not mutually compatible, and the competition and compromise between them result in a final structure with the MRO. This even-handed approach provides a more intuitive explanation of the structure of simple liquid and glass.

42 ENGINEERING↗
DOE OSTI2022

Ordered CoPt oxygen reduction catalyst with high performance and durability

A high-performance and durable polymer electrolyte membrane fuel cell cathode catalyst composed of an ordered L10–CoPt core and a thin Pt shell was designed and prepared. Under practical fuel cell membrane electrode assembly testing conditions, the cathode catalyst showed an outstanding initial mass activity of 0.6 A/mgPt, which satisfies the U.S. Department of Energy performance target while also meeting the durability target of less than 40% loss in mass activity after 30,000 accelerated stress test voltage cycles. The high structural stability of the L10–CoPt@Pt-shell catalyst was confirmed by postmortem materials characterization, and the origin of this robustness was revealed by density functional theory calculations, where the barriers for diffusion of Co atoms were observed to be significantly increased in the ordered intermetallic core.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗