Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “angular deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Fermion localization on a split brane

In this work we analyze the localization of fermions on a brane embedded in five-dimensional, warped and nonwarped, space-time. In both cases we use the same nonlinear theoretical model with a nonpolynomial potential featuring a self-interacting scalar field whose minimum energy solution is a soliton (a kink) which can be continuously deformed into a two-kink. Thus a single brane splits into two branes. The behavior of spin 1/2 fermions wave functions on the split brane depends on the coupling of fermions to the scalar field and on the geometry of the space-time.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Using spin alignment of inelastically excited nuclei in fast beams to assign spins: The spectroscopy of 13 O as a test case

Excited states in O 13 were investigated using inelastic scattering of an E / A = 69.5 MeV O 13 beam off of a Be 9 target. The excited states were identified in the invariant-mass spectra of the decay products. Both single-proton and sequential two-proton decays of the excited states were examined. Furthermore, for a number of the excited states, the protons were emitted with strong anisotropy where emissions transverse to the beam axis are favored. The measured proton-decay angular distributions were compared to predictions from distorted-wave Born-approximation calculations of the spin alignment which was shown to be largely independent of the excitation mechanism. The deduced O 13 level scheme is compared to ab initio no-core shell model with continuum predictions. The lowest-energy excited states decay isotropically consistent with predictions of strong proton 1 s 1 / 2 structure. Above these states in the level scheme, we observed a number of higher-spin states not predicted within the model. Possibly these are associated with rotational bands built on deformed cluster configurations predicted by antisymmetrized molecular dynamics calculations. The spin alignment mechanism is shown to be useful for making spin assignments and may have widespread use.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Determination of the spins and parities for the 0$^{+}_{4}$ and 0$^{+}_{5}$ states in 100 Zr

Here, two 0 + states at 1294.5 and 1774.0 keV, together with three 2 + and one 4 + levels, were identified or unambiguously spin-parity assigned for the first time in 100 Zr utilizing γ-ray spectroscopy and γ–γ angular correlation techniques with the Gammasphere spectrometer, following the β – decay of neutron-rich, mass-separated 100,100m Y isotopes. Comparisons with recent Monte Carlo shell-model calculations indicate that these two states are candidates for the bandhead of a sequence in a shape-coexisting spherical minimum predicted to be located around ≈1500 keV. According to the measured relative B(E2) relative transition probabilities, the 0$^+_5$ state exhibits decay properties which more closely align with those predicted for a spherical shape, while the 0$^+_4$ level is suggested to be associated with a weakly deformed shape similar to one related to the 0$^+_2$ state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Determination of the spins and parities for the $0^+_4$ and $0^+_5$ states in $^{100}Zr$

Two 0 + states at 1294.5 and 1774.0 keV, together with three 2 + and one 4 + levels, were identified or unambiguously spin-parity assigned for the first time in 100 Zr utilizing γ-ray spectroscopy and γ-γ angular correlation techniques with the Gammasphere spectrometer, following the β - decay of neutron-rich, mass separated 100,100m Y isotopes. Comparisons with recent Monte Carlo Shell-Model (MCSM) calculations indicate that these two states are candidates for the bandhead of a sequence in a shape-coexisting spherical minimum predicted to be located around ≈1500 keV. According to the measured relative B(E2) relative transition probabilities, the 0+ 5 state exhibits decay properties which more closely align with those predicted for a spherical shape, while the $0^+_4$ level is suggested to be associated with a weakly-deformed shape similar to one related to the $0^+_2$ state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Determination of the spins and parities for the $0$$^{+}_{4}$ and $0$$^{+}_{5}$ states in 100 Zr

Two 0 + states at 1294.5 and 1774.0 keV, together with three 2 + and one 4 + levels, were identified or unambiguously spin-parity assigned for the first time in 100 Zr utilizing γ-ray spectroscopy and γ-γ angular correlation techniques with the Gammasphere spectrometer, following the β¯ decay of neutron-rich, mass separated 100,100m Y isotopes. Comparisons with recent Monte Carlo Shell-Model (MCSM) calculations indicate that these two states are candidates for the bandhead of a sequence in a shape-coexisting spherical minimum predicted to be located around ≈1500 keV. According to the measured relative B(E2) relative transition probabilities, the $0$$^{+}_{5}$ state exhibits decay properties which more closely align with those predicted for a spherical shape, while the $0$$^{+}_{4}$ level is suggested to be associated with a weakly-deformed shape similar to one related to the $0$$^{+}_{2}$ state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Evolution of Friction Stir Welding Theory at Marshall Space Flight Center

From 1995 to the present the friction stir welding (FSW) process has been under study at Marshall Space Flight Center (MSFC). This is an account of the progressive emergence of a set of conceptual tools beginning with the discovery of the shear surface, wiping metal transfer, and the invention of a kinematic model and making possible a treatment of both metallurgical structure formation and process dynamics in friction stir welding from a unified point of view. It is generally observed that the bulk of the deformation of weld metal around the FSW pin takes place in a very narrow, almost discontinuous zone with high deformation rates characteristic of metal cutting. By 1999 it was realized that this zone could be treated as a shear surface like that in simple metal cutting models. At the shear surface the seam is drawn out and compressed and pressure and flow conditions determine whether or not a sound weld is produced. The discovery of the shear surface was followed by the synthesis of a simple 3- flow kinematic model of the FSW process. Relative to the tool the flow components are: (1) an approaching translational flow at weld speed V, (2) a rotating cylindrical plug flow with the angular velocity of the tool , and (3) a relatively slow ring vortex flow (like a smoke ring) encircling the tool and driven by shoulder scrolls and pin threads. The rotating plug flow picks up an element of weld metal, rotates it around with the tool, and deposits it behind the tool ( wiping metal transfer ); it forms plan section loops in tracers cut through by the tool. Radially inward flow from the ring vortex component retains metal longer in the rotating plug and outward flow expels metal earlier; this interaction forms the looping weld seam trace and the tongue and groove bimetallic weld contour. The radial components of the translational and ring vortex flows introduce parent metal intrusions into the small grained nugget material close to the tool shoulder; if this feature is pronounced, nugget collapse may result. Certain weld features, in particular internal banding seen in transverse section as onion rings and associated surface ridges called tool marks , have long implied an oscillation flow component, but have only recently been attributed in the literature to tool eccentricity. Rotating plug shape, typically a hollow cylinder flared at the end where it sticks to the shoulder, varies as pressure distribution on the tool determines where sticking occurs. Simplified power input estimates balanced against heat loss estimates give reasonable temperature estimates, explain why the power requirement changes hardly at all over a wide range of RPM s, and yield isotherms that seem to fall along boundaries of parameter windows of operation.

Nunes, Arthur C.↗

Supersymmetry of the planar Dirac-Deser-Jackiw-Templeton system and of its nonrelativistic limit

The planar Dirac and the topologically massive vector gauge fields are unified into a supermultiplet involving no auxiliary fields. The super-Poincare symmetry emerges from the osp(1|2) supersymmetry realized in terms of the deformed Heisenberg algebra underlying the construction. The nonrelativistic limit yields spin 1/2 as well as new, spin 1 ''Levy-Leblond-type'' equations which, together, carry an N=2 super-Schroedinger symmetry. Part of the latter has its origin in the universal enveloping algebra of the super-Poincare algebra.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

IRAS 16293: A 'MAGNETIC' TALE OF TWO CORES

We present polarization observations of the dust continuum emission from the young star-forming region IRAS 16293. These observations of IRAS 16293, which is a binary system, were conducted by the Submillimeter Array at an observing frequency of 341.5 GHz (lambda approx 880 mum) and with high angular resolution (approx2''-3''). We find that the large-scale global direction of the field, which is perpendicular to the observed polarization, appears to be along the dust ridge where the emission peaks. On smaller scales we find that the field structure is significantly different for the two components of the binary. The first component, source A, shows a magnetic field structure that is 'hourglass' shaped as predicted from theoretical models of low-mass star formation in the presence of strong magnetic fields. However, the other component, source B, shows a relatively ordered magnetic field with no evidence of any deformation. We have possibly detected a third younger outflow from source A as seen in the SiO emission, which is in addition to the two well-known powerful bipolar outflows in this kinematically active region. There is an observed decrease in polarization toward the center and this 'polarization hole' is similar to decreases seen in other young star-forming regions. Our calculations show that in IRAS 16293 the magnetic energy is stronger than the turbulent energy but is approximately similar to the centrifugal energy. There is a considerable misalignment between the outflow direction and the magnetic field axis, and this is roughly in agreement with model predictions where the magnetic energy is comparable to the centrifugal energy. In conjunction with other observations of the kinematics as determined from the outflow energetics and chemical differentiation, we find that our results provide additional evidence to show that the two protostars appear to be in different stages during their evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

THE EVOLUTION OF CATACLYSMIC VARIABLES AS REVEALED BY THEIR DONOR STARS

We present an attempt to reconstruct the complete evolutionary path followed by cataclysmic variables (CVs), based on the observed mass-radius relationship of their donor stars. Along the way, we update the semi-empirical CV donor sequence presented previously by one of us, present a comprehensive review of the connection between CV evolution and the secondary stars in these systems, and reexamine most of the commonly used magnetic braking (MB) recipes, finding that even conceptually similar ones can differ greatly in both magnitude and functional form. The great advantage of using donor radii to infer mass-transfer and angular-momentum-loss (AML) rates is that they sample the longest accessible timescales and are most likely to represent the true secular (evolutionary average) rates. We show explicitly that if CVs exhibit long-term mass-transfer-rate fluctuations, as is often assumed, the expected variability timescales are so long that other tracers of the mass-transfer rate-including white dwarf (WD) temperatures-become unreliable. We carefully explore how much of the radius difference between CV donors and models of isolated main-sequence stars may be due to mechanisms other than mass loss. The tidal and rotational deformation of Roche-lobe-filling stars produces {approx_equal} 4.5% radius inflation below the period gap and {approx_equal} 7.9% above. A comparison of stellar models to mass-radius data for non-interacting stars suggests a real offset of {approx_equal} 1.5% for fully convective stars (i.e., donors below the gap) and {approx_equal} 4.9% for partially radiative ones (donors above the gap). We also show that donor bloating due to irradiation is probably smaller than, and at most comparable to, these effects. After calibrating our models to account for these issues, we fit self-consistent evolution sequences to our compilation of donor masses and radii. In the standard model of CV evolution, AMLs below the period gap are assumed to be driven solely by gravitational radiation (GR), while AMLs above the gap are usually described by an MB law first suggested by Rappaport et al. We adopt simple scaled versions of these AML recipes and find that these are able to match the data quite well. The optimal scaling factors turn out to be f{sub GR} = 2.47 {+-} 0.22 below the gap and f{sub MB} = 0.66 {+-} 0.05 above (the errors here are purely statistical, and the standard model corresponds to f{sub GR} = f{sub MB} = 1). This revised model describes the mass-radius data significantly better than the standard model. Some of the most important implications and applications of our results are as follows. (1) The revised evolution sequence yields correct locations for the minimum period and the upper edge of the period gap; the standard sequence does not. (2) The observed spectral types of CV donors are compatible with both standard and revised models. (3) A direct comparison of predicted and observed WD temperatures suggests an even higher value for f{sub GR}, but this comparison is sensitive to the assumed mean WD mass and the possible existence of mass-transfer-rate fluctuations. (4) The predicted absolute magnitudes of donor stars in the near-infrared form a lower envelope around the observed absolute magnitudes for systems with parallax distances. This is true for all of our sequences, so any of them can be used to set firm lower limits on (or obtain rough estimates of) the distances toward CVs based only on P{sub orb} and single epoch near-IR measurements. (5) Both standard and revised sequences predict that short-period CVs should be susceptible to dwarf nova (DN) eruptions, consistent with observations. However, both sequences also predict that the fraction of DNe among long-period CVs should decline with P{sub orb} above the period gap. Observations suggest the opposite behavior, and we discuss the possible explanations for this discrepancy. (6) Approximate orbital period distributions constructed from our evolution sequences suggest that the ratio of long-period CVs to short-period, pre-bounce CVs is about 3 x higher for the revised sequence than the standard one. This may resolve a long-standing problem in CV evolution. Tables describing our donor and evolution sequences are provided in electronically readable form.

79 ASTRONOMY AND ASTROPHYSICS↗

Variational integrators for the dynamics of thermo-elastic solids with finite speed thermal waves

This paper formulates variational integrators for finite element discretizations of deformable bodies with heat conduction in the form of finite speed thermal waves. The cornerstone of the construction consists in taking advantage of the fact that the Green–Naghdi theory of type II for thermo-elastic solids has a Hamiltonian structure. Thus, standard techniques to construct variational integrators can be applied to finite element discretizations of the problem. The resulting discrete-in-time trajectories are then consistent with the laws of thermodynamics for these systems: for an isolated system, they exactly conserve the total entropy, and nearly exactly conserve the total energy over exponentially long periods of time. Moreover, linear and angular momenta are also exactly conserved whenever the exact system does. For definiteness, we construct an explicit second-order accurate algorithm for affine tetrahedral elements in two and three dimensions, and demonstrate its performance with numerical examples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unified Mechanism behind the Appearance of T-Odd TRI and ROT Asymmetries in Actinide Fission Induced by Cold Polarized Neutrons

Some shortcomings of the approaches that are used to describe T-odd ROT and TRI asymmetries in true ternary fission via reactions involving the emission of prescission alpha particles and which are based on employing the classical method of trajectory calculations are analyzed. These shortcomings are caused by the disregard of the interference between the fission widths of different sJ{sub s} neutron resonance states formed in the first well of the deformation potential of fissile compound nuclei. It is shown that the method used in some studies to determine T-odd TRI-asymmetries for prescission alpha particles is at odds with basic concepts of the generalizedmodel of the nucleus and approaches to constructing collective (for example, bending) vibrations of a fissile compound nucleus. Quantum-mechanical fission theory is generalized via employing a unified mechanism of formation of T-odd TRI and ROT asymmetries for prescission alpha particles and evaporated photons (neutrons). The proposed mechanism takes correctly into account the effect of quantum rotation of a fissile compound nucleus on the angular distributions of fission fragments and alpha particles for true ternary fission, as well as on the angular distribution of prompt photons (neutrons) emitted by fragments originating from the delayed fission of the aforementioned nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Orion Optical Navigation Progress Toward Exploration: Mission 1

Optical navigation of human spacecraft was proposed on Gemini and implemented successfully on Apollo as a means of autonomously operating the vehicle in the event of lost communication with controllers on Earth. It shares a history with the "method of lunar distances" that was used in the 18th century and gained some notoriety after its use by Captain James Cook during his 1768 Pacific voyage of the HMS Endeavor. The Orion emergency return system utilizing optical navigation has matured in design over the last several years, and is currently undergoing the final implementation and test phase in preparation for Exploration Mission 1 (EM-1) in 2019. The software development is being worked as a Government Furnished Equipment (GFE) project delivered as an application within the Core Flight Software of the Orion camera controller module. The mathematical formulation behind the initial ellipse fit in the image processing is detailed in Christian. The non-linear least squares refinement then follows the technique of Mortari as an estimation process of the planetary limb using the sigmoid function. The Orion optical navigation system uses a body fixed camera, a decision that was driven by mass and mechanism constraints. The general concept of operations involves a 2-hour pass once every 24 hours, with passes specifically placed before all maneuvers to supply accurate navigation information to guidance and targeting. The pass lengths are limited by thermal constraints on the vehicle since the OpNav attitude generally deviates from the thermally stable tail-to-sun attitude maintained during the rest of the orbit coast phase. Calibration is scheduled prior to every pass due to the unknown nature of thermal effects on the lens distortion and the mounting platform deformations between the camera and star trackers. The calibration technique is described in detail by Christian, et al. and simultaneously estimates the Brown-Conrady coefficients and the Star Tracker/Camera interlock angles. Accurate attitude information is provided by the star trackers during each pass. Figure 1 shows the various phases of lunar return navigation when the vehicle is in autonomous operation with lost ground communication. The midcourse maneuvers are placed to control the entry interface conditions to the desired corridor for safe landing. The general form of optical navigation on Orion is where still images of the Moon or Earth are processed to find the apparent angular diameter and centroid in the camera focal plane. This raw data is transformed into range and bearing angle measurements using planetary data and precise star tracker inertial attitude. The measurements are then sent to the main flight computer's Kalman filter to update the onboard state vector. The images are, of course, collected over an arc to converge the state and estimate velocity. The same basic technique was used by Apollo to satisfy loss-of-comm, but Apollo used manual crew sightings with a vehicle-integral sextant instead of autonomously processing optical imagery. The software development is past its Critical Design Review, and is progressing through test and certification for human rating. In support of this, a hardware-in-the-loop test rig was developed in the Johnson Space Center Electro-Optics Lab to exercise the OpNav system prior to integrated testing on the Orion vehicle. Figure 2 shows the rig, which the test team has dubbed OCILOT (Orion Camera In the Loop Optical Testbed). Analysis performed to date shows a delivery that satisfies an allowable entry corridor as shown in Figure 3.

Holt, Greg N.↗

Transverse momentum distributions inside the nucleon from lattice QCD

We study transverse momentum dependent parton distribution functions (TMDs) with non-local operators in lattice QCD, using MILC/LHPC lattices. Results obtained with a simplified operator geometry show visible dipole deformations of spin-dependent quark momentum densities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Plate Motions, Regional Deformation, and Time-Variation of Plate Motions

The significant results obtained with support of this grant include the following: (1) Using VLBI data in combination with other geodetical, geophysical, and geological data to bound the present rotation of the Colorado Plateau, and to evaluate to its implications for the kinematics and seismogenic potential of the western half of the conterminous U.S. (2) Determining realistic estimates of uncertainties for VLBI data and then applying the data and uncertainties to obtain an upper bound on the integral of deformation within the "stable interior" of the North American and other plates and thus to place an upper bound on the seismogenic potential within these regions. (3) Combining VLBI data with other geodetic, geophysical, and geologic data to estimate the motion of coastal California in a frame of reference attached to the Sierra Nevada-Great Valley microplate. This analysis has provided new insights into the kinematic boundary conditions that may control or at least strongly influence the locations of asperities that rupture in great earthquakes along the San Andreas transform system. (4) Determining a global tectonic model from VLBI geodetic data that combines the estimation of plate angular velocities with individual site linear velocities where tectonically appropriate. and (5) Investigation of the some of the outstanding problems defined by the work leading to global plate motion model NUVEL-1. These problems, such as the motion between the Pacific and North American plates and between west Africa and east Africa, are focused on regions where the seismogenic potential may be greater than implied by published plate tectonic models.

Gordon, R. G.↗

Creation and Shaping of Three-Dimensional Ultrafine-Grain Materials

On account of their improved physicomechanical characteristics, materials with ultrafine-grain and nanocrystalline structure are of great interest in manufacturing and elsewhere. There has been considerable research on methods of producing such materials. The techniques most commonly used to produce three-dimensional ultrafine-grain materials are equal-channel angular pressing; cumulative rolling; intense rolling; and friction with mixing. However, little information is available regarding the influence of the shaping conditions on the structure and properties of three-dimensional ultrafine-grain materials. Accordingly, there is a pressing need to find effective structuring and shaping methods for the manufacture of parts from ultrafine-grain materials with enhanced performance. Analysis of structuring and shaping methods indicates that the production of high-quality parts from three-dimensional ultrafine-grain and nanocrystalline materials calls for the development of processes, equipment, and tools such that the physicomechanical characteristics and structure of the materials formed by intense plastic deformation are retained.

36 MATERIALS SCIENCE↗

In situ synchrotron study of electromigration induced grain rotations in Sn solder joints

In this paper we report an in situ study of the early stage of microstructure evolution induced by electromigration in a Pb-free β-Sn based solder joint by synchrotron polychromatic X-ray microdiffraction. With this technique, crystal orientation evolution is monitored at intragranular levels with high spatial and angular resolution. During the entire experiment, no crystal growth is detected, and rigid grain rotation is observed only in the two grains within the current crowding region, where high density and divergence of electric current occur. Theoretical calculation indicates that the trend of electrical resistance drop still holds under the present conditions in the grain with high electrical resistivity, while the other grain with low resistivity reorients to align its a-axis more parallel with the ones of its neighboring grains. A detailed study of dislocation densities and subgrain boundaries suggests that grain rotation in β-Sn, unlike grain rotation in high melting temperature metals which undergo displacive deformation, is accomplished via diffusional process mainly, due to the high homologous temperature.

36 MATERIALS SCIENCE↗

Anisotropy in solid inflation

In the model of solid / elastic inflation, inflation is driven by a source that has the field theoretical description of a solid. To allow for prolonged slow roll inflation, the solid needs to be extremely insensitive to the spatial expansion. We point out that, because of this property, the solid is also rather inefficient in erasing anisotropic deformations of the geometry. This allows for a prolonged inflationary anisotropic solution, providing the first example with standard gravity and scalar fields only which evades the conditions of the so called cosmic no-hair conjecture. We compute the curvature perturbations on the anisotropic solution, and the corresponding phenomenological bound on the anisotropy. Finally, we discuss the analogy between this model and the f(φ)F{sup 2} model, which also allows for anisotropic inflation thanks to a suitable coupling between the inflaton φ and a vector field. We remark that the bispectrum of the curvature perturbations in solid inflation is enhanced in the squeezed limit and presents a nontrivial angular dependence, as had previously been found for the f(φ)F{sup 2} model.

79 ASTRONOMY AND ASTROPHYSICS↗

Isospin and deformation studies in the odd-odd N=Z nucleus {sup 54}Co

High-spin states in the odd-odd N=Z nucleus {sup 54}Co have been investigated by the fusion-evaporation reaction {sup 28}Si({sup 32}S,1{alpha}1p1n){sup 54}Co. Gamma-ray information gathered with the Ge detector array Gammasphere was correlated with evaporated particles detected in the charged particle detector system Microball and a 1{pi} neutron detector array. A significantly extended excitation scheme of {sup 54}Co is presented, which includes a candidate for the isospin T=1, 6{sup +} state of the 1f{sub 7/2}{sup -2} multiplet. The results are compared to large-scale shell-model calculations in the fp shell. Effective interactions with and without isospin-breaking terms have been used to probe isospin symmetry and isospin mixing. A quest for deformed high-spin rotational cascades proved negative. This feature is discussed by means of cranking calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗