Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Dipole Alignment at the Carbon Nanotube and Methyl Ammonium Lead Iodide Perovskite Interface

This work correlates resonant peaks from first principles calculation on ammonia (NH 3 ) Nitrogen 1s x-ray absorption spectroscopy (XAS) within the methyl ammonium lead iodide perovskite (CH 3 NH 3 PbI 3 ), and proposes a curve to determine the alignment of the methyl ammonium dipole if there exists angular dependence. The Nitrogen 1s XAS was performed at varying incident angles on the perovskite with and without a carbon nanotube (CNT) interface produced from an ultrasonic spray deposition. We investigated the peak contribution from PbI 2 and the poly(9,9-dioctylfluorene- 2,7-diyl) with bipyridine (PFO-BPy) wrapped around the CNT, and used normalization techniques to better identify the dipole alignment. There was angular dependence on samples containing the CNT interface suggesting an existing dipole alignment, but there was no angular dependence on the perovskite samples alone; however, more normalization techniques and experimental work must be performed in order to ensure its validity and to better describe its alignment, and possible controlling factors.

14 SOLAR ENERGY↗

Dipole Alignment at the Carbon Nanotube and Methyl Ammonium Lead Iodide Perovskite Interface

I used mathematical calculations based on density functional theory for ammonia in order to predict what the x-ray spectra would look like for methyl ammonium lead iodide perovskite film, and to understand what each prominent peak on this spectra means. An x-ray spectra is made from detecting ejecting electrons, emitted light, or even a sample current from the target when the x-rays energy meets certain resonance for the targeted material. After completing these theoretical calculations, I found that the material had enough theory to support angular dependent x-ray absorption spectroscopy, meaning that I would measure different detected measurements for different angles of the x-ray, where other materials are invariant to this change if there were no dipole alignments. In the experimental x-ray absorption spectroscopy, the perovskite without carbon nanotubes did not have any angular dependence, which suggests that the dipoles within the material are not aligned; however, adding the carbon nanotubes on top of the perovskite did have angular dependence. The alignment could not be determined because the carbon nanotubes had nitrogen sources inside of it, such as pyridine, which had resonant energies and detect measurements dominating over the regions of interest. More work will need to be done to determine valid ways of removing these dominating measurements, but the changes noticed between no carbon nanotube and with carbon nanotube, as well as pyridine, gives insight on factors that might control the dipole’s alignment.

15 GEOTHERMAL ENERGY↗

Dipole Alignment at the Carbon Nanotube and Methyl Ammonium Lead Trihalide Perovskite Interface - Oral Presentation [Slides]

This work correlates resonant peaks from first principles calculation on ammonia (NH 3 ) Nitrogen 1s x-ray absorption spectroscopy (XAS) within the methyl ammonium lead iodide perovskite (CH 3 NH 3 PbI 3 ), and proposes a curve to determine the alignment of the methyl ammonium dipole if there exists angular dependence. The Nitrogen 1s XAS was performed at varying incident angles on the perovskite with and without a carbon nanotube (CNT) interface produced from an ultrasonic spray deposition. We investigated the peak contribution from PbI2 and the poly(9,9-dioctylfluorene-2,7-diyl) with bipyridine (PFO-BPy) wrapped around the CNT, and used normalization techniques to better identify the dipole alignment. There was angular dependence on samples containing the CNT interface suggesting an existing dipole alignment, but there was no angular dependence on the perovskite samples alone; however, more normalization techniques and experimental work must be performed in order to ensure its validity and to better describe its alignment, and possible controlling factors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NSLS-II Booster Survey and Alignment Systems

This section outlines the survey and alignment requirements and the technology and tools for achieving the NSLS-II equipment positioning goals. The required alignment tolerances are defined primarily by the physics requirements of the accelerator. The tight tolerances dictated by the physics requirements are an order of magnitude tighter than the tolerances of second generation light sources (NSLS) and on level with those at third generation light sources (Soleil, Diamond). These extraordinary position requirements necessitate a concerted R&D engineering effort to identify and develop the survey methodology needed to meet these requirements. As of this date, the methodology is still evolving to balance cost and time constraints while still maintaining the integrity of the survey and alignment systems. State-of-the art equipment including Laser Trackers and Laser Arms have been purchased and used extensively in the pursuit of meeting the NSLS-II survey tolerances. No new technology will need to be developed to meet the alignment requirements but new techniques will be pursued and developed.

36 MATERIALS SCIENCE↗

CTT: Tools for Fine Alignment of Flash X-ray Systems

The CTT code is a compilation of the python code that was prototyped in the interest of making a method for fine alignment of Flash X-ray Systems at the lab. It contains python code for interacting with LTT and running optimization loops using LTT simulations or ray tracing with RaySpace. It Includes classes for creating phantom objects and modular geometry objects in the simulations. It allows one to generate a random phantom that has been optimized to stay with a certain cubic volume and maximize the minimum distance between any two ball phantom centers in all projections. It was primarily made to work on ball phantoms which were simulated as Teflon spheres. It allows the alignment from some nominal position to some displaced position to simulate recovery of a real geometry from the nominal geometry of the system. Fine alignment can be done with the projections in LTT while a rough alignment is faster using rayspace. If rayspace works well for the use case it should be preferred since it is considerably faster and less resource intensive in general. Some Notes about using this code is that one will have to edit the imports for the files to get to the correct LTT path, LTT GUI path and to the CTT path when importing. This was made by using anaconda with python 3 on windows 10. The LTT code was stored in a anaconda environment which seemed to help the python find the LTT although it shouldn’t be necessary if you append the path in your code using sys.path.append(r'add the path you want here’). The sys.path.append method is a quick way to give your python code access to a given folder when running it (such as LTT or CTT). Note that since the code was originally made with paths for a specific machine that a new user will have to edit those paths to make it work in all the files that use the old paths. This is somewhat tedious but will be required to run the code on a new machine. The methodology used to run and make these notebooks starts with opening a command prompt as administrator in windows 10. After this one would activate the anaconda environment in the appropriate directory using “conda activate myenv” in the command prompt. After this open a jupyter-notebook using the keyword “jupyter-notebook". After that a notebook should open in a browser. Note that some libraries used may not come with anaconda so those may have to be installed. There shouldn’t be much though since the main things used are scipy, numpy, matplotlib, and LTT. LTTQuicksetup also requires some paths that will be specific to the computer so that should be changed as well.

42 ENGINEERING↗

Preparation of Nanocomposite Plasmonic Films Made from Cellulose Nanocrystals or Mesoporous Silica Decorated with Unidirectionally Aligned Gold Nanorods

Using liquid crystalline self-assembly of cellulose nanocrystals, we achieve long-range alignment of anisotropic metal nanoparticles in colloidal nanocrystal dispersions that are then used to deposit thin structured films with ordering features highly dependent on the deposition method. These hybrid films are comprised of gold nanorods unidirectionally aligned in a matrix that can be made of ordered cellulose nanocrystals or silica nanostructures obtained by using cellulose-based nanostructures as a replica. The ensuing long-range alignment of gold nanorods in both cellulose-based and nanoporous silica films results in a polarization-sensitive surface plasmon resonance. The demonstrated device-scale bulk nanoparticle alignment may enable engineering of new material properties arising from combining the orientational ordering of host nanostructures and properties of the anisotropic plasmonic metal nanoparticles. Our approach may also allow for scalable fabrication of plasmonic polarizers and nanoporous silica structures with orientationally ordered anisotropic plasmonic nanoinclusions.

mesoporous silica↗

The morphologies and alignments of gas, mass, and the central galaxies of clash clusters of galaxies

Morphology is often used to infer the state of relaxation of galaxy clusters. The regularity, symmetry, and degree to which a cluster is centrally concentrated inform quantitative measures of cluster morphology. The Cluster Lensing and Supernova survey with Hubble Space Telescope (CLASH) used weak and strong lensing to measure the distribution of matter within a sample of 25 clusters, 20 of which were deemed to be “relaxed” based on their X-ray morphology and alignment of the X-ray emission with the Brightest Cluster Galaxy. Toward a quantitative characterization of this important sample of clusters, we present uniformly estimated X-ray morphological statistics for all 25 CLASH clusters. We compare X-ray morphologies of CLASH clusters with those identically measured for a large sample of simulated clusters from the MUSIC-2 simulations, selected by mass. We confirm a threshold in X-ray surface brightness concentration of C ≳ 0.4 for cool-core clusters, where C is the ratio of X-ray emission inside 100 h{sub 70}{sup −1} kpc compared to inside 500 h{sub 70}{sup −1} kpc. We report and compare morphologies of these clusters inferred from Sunyaev–Zeldovich Effect (SZE) maps of the hot gas and in from projected mass maps based on strong and weak lensing. We find a strong agreement in alignments of the orientation of major axes for the lensing, X-ray, and SZE maps of nearly all of the CLASH clusters at radii of 500 kpc (approximately 1/2 R{sub 500} for these clusters). We also find a striking alignment of clusters shapes at the 500 kpc scale, as measured with X-ray, SZE, and lensing, with that of the near-infrared stellar light at 10 kpc scales for the 20 “relaxed” clusters. This strong alignment indicates a powerful coupling between the cluster- and galaxy-scale galaxy formation processes.

79 ASTRONOMY AND ASTROPHYSICS↗

Properties and Alignment of Interstellar Dust Grains toward Type Ia Supernovae with Anomalous Polarization Curves

Recent photometric and polarimetric observations of Type Ia supernovae (SNe Ia) show unusually low total-to-selective extinction ratios ( R {sub V} < 2) and wavelengths of maximum polarization ( λ{sub max} < 0.4 μ m) for several SNe Ia, which indicates peculiar properties of interstellar (IS) dust in the SN-hosted galaxies and/or the presence of circumstellar (CS) dust. In this paper, we use an inversion technique to infer the best-fit grain size distribution and the alignment function of interstellar grains along the lines of sight toward four SNe Ia with anomalous extinction and polarization data (SN 1986G, SN 2006X, SN 2008fp, and SN 2014J). We find that to reproduce low values of R{sub V}, a significant enhancement in the mass of small grains of radius a < 0.1 μ m is required. For SN 2014J, a simultaneous fit to its observed extinction and polarization is unsuccessful if all the data are attributed to IS dust (model 1), but a good fit is obtained when accounting for the contribution of CS dust (model 2). For SN 2008fp, our best-fit results for model 1 show that in order to reproduce an extreme value of λ{sub max} ∼ 0.15 μ m, small silicate grains must be aligned as efficiently as big grains. For this case, we suggest that strong radiation from the SN can induce efficient alignment of small grains in a nearby intervening molecular cloud via the radiative torque (RAT) mechanism. The resulting time dependence polarization from this RAT alignment model can be tested by observing at ultraviolet wavelengths.

79 ASTRONOMY AND ASTROPHYSICS↗

Brightest Cluster Galaxy Alignments in Merging Clusters

The orientations of brightest cluster galaxies (BCGs) and their host clusters tend to be aligned, but the mechanism driving this is not clear. To probe the role of cluster mergers in this process, we quantify alignments of 38 BCGs in 22 clusters undergoing major mergers (up to ~1 Gyr after first pericenter). We find alignments entirely consistent with those of clusters in general. This suggests that alignments are robust against major cluster mergers. If, conversely, major cluster mergers actually help orient the BCG, such a process is acting quickly because the orientation is in place within ~1 Gyr after first pericenter.

79 ASTRONOMY AND ASTROPHYSICS↗

LoVoCCS. II. Weak Lensing Mass Distributions, Red-sequence Galaxy Distributions, and Their Alignment with the Brightest Cluster Galaxy in 58 Nearby X-Ray-luminous Galaxy Clusters

The Local Volume Complete Cluster Survey is an ongoing program to observe nearly a hundred low-redshift X-ray-luminous galaxy clusters (redshifts 0.03 < z < 0.12 and X-ray luminosities in the 0.1–2.4 keV band L X500c > 10 44 erg s −1 ) with the Dark Energy Camera, capturing data in the u, g, r, i, z bands with a 5σ point source depth of approximately 25th–26th AB magnitudes. Here, we map the aperture masses in 58 galaxy cluster fields using weak gravitational lensing. These clusters span a variety of dynamical states, from nearly relaxed to merging systems, and approximately half of them have not been subject to detailed weak lensing analysis before. In each cluster field, we analyze the alignment between the 2D mass distribution described by the aperture mass map, the 2D red-sequence (RS) galaxy distribution, and the brightest cluster galaxy (BCG). We find that the orientations of the BCG and the RS distribution are strongly aligned throughout the interiors of the clusters: the median misalignment angle is 19° within 2 Mpc. We also observe the alignment between the orientations of the RS distribution and the overall cluster mass distribution (by a median difference of 32° within 1 Mpc), although this is constrained by galaxy shape noise and the limitations of our cluster sample size. These types of alignment suggest long-term dynamical evolution within the clusters over cosmic timescales.

79 ASTRONOMY AND ASTROPHYSICS↗

Elementary Composite Binary and Grain Alignment Locked in Dust Growth

Abstract Planets are known to grow out of a star-encircling disk of the gas and dust inherited from an interstellar cloud; their formation is thought to begin with coagulation of submicron dust grains into aggregates, the first foundational stage of planet formation. However, with nanoscale and submicron solids unobservable directly in the interstellar medium (ISM) and protoplanetary disks, how dust grains grow is unclear, as are the morphology and structure of interstellar grains and the whereabouts and form of “missing iron.” Here we show an elementary composite binary in 3D sub-10 nm detail—and the alignments of its two subunits and nanoinclusions and a population of elongated composite grains locked in a primitive cosmic dust particle—noninvasively uncovered with phase-contrast X-ray nanotomography. The binary comprises a pair of oblate, quasi-spheroidal grains whose alignment and shape meet the astrophysical constraints on polarizing interstellar grains. Each member of the pair contains a high-density core of octahedral nanocrystals whose twin relationship is consistent with the magnetite’s diagnostic property at low temperatures, with a mantle exhibiting nanoscale heterogeneities, rounded edges, and pitted surfaces. This elongated binary evidently formed from an axially aligned collision of the two similar composite grains whose core–mantle structure and density gradients are consistent with interstellar processes and astronomical evidence for differential depletion. Our findings suggest that the ISM is threaded with dust grains containing preferentially oriented iron-rich magnetic nanocrystals that hold answers to astronomical problems from dust evolution, grain alignment, and the structure of magnetic fields to planetesimal growth.

Hu, Z. W. (ORCID:0000000278648830)↗

Alignment and focus of mirrored facets of a heliosat

Various technologies pertaining to aligning and focusing mirrored facets of a heliostat are described herein. Updating alignment and/or focus of mirrored facets is undertaken through generation of a theoretical image, wherein the theoretical image is indicative of a reflection of the target via the mirrored facets when the mirrored facets are properly aligned. This theoretical image includes reference points that are overlaid on an image of the target as reflected by the mirrored facets of the heliostat. A technician adjusts alignment/focus of a mirrored facet by causing reflected reference markings to become aligned with the reference points in the theoretical image.

47 OTHER INSTRUMENTATION↗

Fixture for aligning motor assembly

An alignment fixture includes a rotor fixture, a stator fixture and a sensor system which measures a rotational displacement therebetween. The fixture precisely measures rotation of a generator stator assembly away from a NULL position referenced by a unique reference spline on the rotor shaft. By providing an adjustable location of the stator assembly within the housing, the magnetic axes within each generator shall be aligned to a predetermined and controlled tolerance between the generator interface mounting pin and the reference spline on the rotor shaft. Once magnetically aligned, each generator is essentially a line replaceable unit which may be readily mounted to any input of a multi-generator gearbox assembly with the assurance that the magnetic alignment will be within a predetermined tolerance.

42 ENGINEERING↗

Software tool for the analysis and visualization of whole genome alignments

GenomeVISTA is a tool which performs and displays pairwise and multiple whole genome DNA alignments. The tools provides a graphical user interface by which users can navigate alignments and multiple levels of resolution and get imformation about individual aligned regions. Users can load their own sequences into GenomeVISTA or view pre-computed alignments for genomes in the VISTA database.

Source record↗

Assessing Alignment Between a Top-Down LCA Model and a Bottom-Up Supply Chain Model for Data Gap Identification and Prioritization

This work presents a method for evaluating the alignment between the results of bottom-up and top-down models and using the evaluation to enhance the bottom-up model and underlying data set. Disaggregation is used to enhance the embodied energy results of top-down models, which are then compared to bottom-up model results. Using the disaggregated top-down results makes it possible to identify specific data gaps and deficiencies within the bottom-up model and its data set. The top-down results will also provide information around which data gaps in the bottom-up model are contributing the most error to the results; in this way, data gaps can be identified as either critical or non-critical, and the effort needed to acquire and add data can be prioritized. Although the proposed method could be applied to any physical quantity or environmental impact that can be quantified with both bottom-up models (typically in physical units) and top-down models (typically in monetary units), embodied energy is the focus of this work. The disaggregated energy baseline is calculated from the throughput vector x, which gives the total economic activity required from each sector to provide a final demand. Using the direct requirements matrix, each element in x is disaggregated into a vector of inputs to the corresponding sector. Energy data from the interventions matrix B is then used to convert the monetary flows of the disaggregated x into physical energy flows. For each energy flow, the origin sector, the destination sector, and the energy carrier type will all be known. These energetic flows are analogous but not identical to direct energy inputs that would appear in a unit process used in life cycle analysis and other bottom-up methods, and thus can be used to evaluate the alignment between the top-down results and the results of a bottom-up model. To demonstrate and further develop the proposed method, embodied energy for chemicals assessed in the 2015 U.S. DOE bandwidth study on energy use within the chemical sector will be calculated using a top-down and a bottom-up model. The Materials Flows through Industry (MFI) modeling tool developed at the National Renewable Energy Laboratory is used as the bottom-up model, and the U.S. EEIO model, recently published by the U.S. Environmental Protection Agency, is used as the top-down model. U.S. EEIO and MFI results will be evaluated to determine how well the model results align. Where the two models are not in good alignment, the disaggregation method described above will be applied to the top-down model to generate a more detailed set of results that will aid in identifying data gaps in the MFI database. Using only MFI, data gaps can be identified in terms of which sectors have few or no unit processes in the database, but no information is available regarding the impact of the missing data on MFI results. The disaggregated top-down results will provide this information on which gaps in the MFI data are critical and have a significant impact on the results, and which are less important.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Multi-device cooling structure having assembly alignment features

A single device having both thermal and alignment features is provided to mechanically align and more efficiently cool multiple heat generating components. The device includes one or more thermal structures and assembly alignment features, in which the one or more thermal structures make thermal contact with a plurality of heat generating components. The assembly alignment features control the positions of the heat generating components during assembly of the heat generating components onto a common substrate.

42 ENGINEERING↗

Separable self-aligning waveguide connector using a ball detent assembly having ball elements engaged with mating divots

Provided herein are various examples of separable waveguide couplers. In one example, a collar element is provided to surround a member comprising a faying surface, a waveguide conduit, and alignment protrusions arranged radially about a perimeter of the faying surface, where the collar element is configured to accept insertion of a mating member comprising a mating faying surface and a mating waveguide conduit. A ball detent assembly is provided having a spring element that retains ball elements in holes formed through the collar element. The waveguide conduit and the mating waveguide conduit are configured to be aligned radially by at least engagement of the alignment protrusions with alignment channels in the mating member and restrained axially by at least engagement of the ball elements with mating divots in the mating member.

Weems, Weyman Albert↗

Autonomous Coupler Alignment Using Position-Based Visual Servoing in a ROS 2 Framework

As robotic arms are becoming increasingly common alongside humans as collaborative robots, their high precision in motion enables tasks to be performed at significantly higher speeds with reduced disruption in the environment. The Fermi National Accelerator Laboratory is exploring this application by incorporating a UR16e from Universal Robots in a cleanroom setting during assembly of couplers to superconducting radio frequency cavities as part of the PIP-II project. The goal of the robotic assembly process is to precisely position the UR16e robot so that the coupler flange, mounted on the robot’s end-effector, is accurately aligned with and pressed against the cavity flange, requiring only final fastening by a lab technician. This thesis builds upon an initial system in which the robotic process was limited to the alignment phase using position-based visual servoing with an eye-in-hand camera to only align the coupler to the cavity with an offset distance. The objective of this thesis is to further advance autonomous robotic assembly by extending the process. To this end, the entire software framework was reconstructed, as the previous development environment posed significant challenges in modifying the software and adapting to hardware changes. The main contributions of this thesis are as follows: (i) a modular and scalable software framework based on ROS~2 was developed to facilitate performance expansion and interchangeability of software and hardware components; (ii) the desired alignment position for position-based visual servoing was parameterized to enable flexible configuration; and (iii) a methodology was developed to close the offset distance between the coupler and cavity utilizing the internal force-torque sensing capability of the UR16e, as visual feedback is not available during the offset-closing phase. The proposed autonomous robotic assembly reduces assembly time and technician involvement, thereby minimizing the risk of airborne particulate contamination, which is essential in the cleanroom setting. Moreover, the ROS~2-based framework provides a foundation for further expansion and continued advancement of robotic automation in Fermilab.

Giffen, Nickolas [Northern Illinois U.]↗