Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Analysis of the Tropospheric Doppler Radar Wind Profiler Measurement Accuracy

Space launch vehicle trajectory design uses atmospheric winds to determine vehicle performance and structural margin assessments prior to flight. For launches at the United States Space Force’s Eastern Range (ER) at the Cape Canaveral Space Force Station (CCSFS), tropospheric wind measurements come from either in-situ or remote sensing instrumentation. The use of the National Aeronautics and Space Administration’s (NASA) Kennedy Space Center (KSC) 48-MHz Tropospheric Doppler Radar Wind Profiler (TDRWP) has become the primary wind measurement source for several launch vehicles. Extensive evaluations of TDRWP data have occurred to quantify the system performance. This includes quantifying the accuracy of wind estimates over the entire sampling altitude as well as at discrete altitudes. This paper will describe methodology and analyses used to quantify the measurement accuracy of TDRWP data when operating in an alternative mission support mode over a 2-year period from March 2020 to March 2022.

Meghan E Carrico↗
NASA NTRSDate not supplied

Evaluation of the Accuracy of the Load Prediction Equations of Low-Load Balance Calibration Data

Accuracy and reliability of the load prediction equations of a low-load calibration data set of a force balance were investigated. First, independent load prediction equations were generated from the data of a full-load and low-load machine calibration. Then, the low-load data set was processed as a set of precision check loads for the load prediction equations that were obtained from the full-load and low-load calibrations. Finally, the load prediction equations of the two calibrations were applied to four manual check load data sets that were recorded between 2009 and 2022. The residuals of the predicted calibration and check loads were compared in all cases. No systematic improvement of the load prediction accuracy was observed when the load prediction equations of the low-load calibration were applied to the check load data sets. Therefore, it is recommended to apply a full-load calibration to a six-component balance even if the balance is not used across its entire design envelope. This approach has the advantage that the resulting load prediction equations are less likely to be applied outside of the calibration load ranges. In addition, it is expected that the numerical estimates of the bridge sensitivities are more reliable assuming that the uncertainties of the applied loads and measured outputs of the calibration data are more or less constant across the load range of the balance.

strain-gage balance↗
NASA NTRS2006

Star Tracker Based ATP System Conceptual Design and Pointing Accuracy Estimation

A star tracker based beaconless (a.k.a. non-cooperative beacon) acquisition, tracking and pointing concept for precisely pointing an optical communication beam is presented as an innovative approach to extend the range of high bandwidth (> 100 Mbps) deep space optical communication links throughout the solar system and to remove the need for a ground based high power laser as a beacon source. The basic approach for executing the ATP functions involves the use of stars as the reference sources from which the attitude knowledge is obtained and combined with high bandwidth gyroscopes for propagating the pointing knowledge to the beam pointing mechanism. Details of the conceptual design are presented including selection of an orthogonal telescope configuration and the introduction of an optical metering scheme to reduce misalignment error. Also, estimates are presented that demonstrate that aiming of the communications beam to the Earth based receive terminal can be achieved with a total system pointing accuracy of better than 850 nanoradians (3 sigma) from anywhere in the solar system.

star tracker↗
NASA NTRSDate not supplied

Venus Atmospheric Probe and Flyby Relay Spacecraft Cross-Link Tracking Impact on Relative Pointing Accuracy

Scientific exploration of Venus using an atmospheric probe requires relaying telemetry to Earth as the probe descends through the atmosphere to the surface of Venus. Using the flyby spacecraft to relay the probe telemetry to Earth will require precise carrier-to-probe pointing accuracy of the relay spacecraft’s antenna. NASA’s Deep Atmosphere Venus Investigation of Noble gases, Chemistry, and Imaging (DAVINCI) mission uses this carrier-to-probe relay technique. Although DAVINCI includes a coherent cross-link for science, this is not baselined for navigation tracking. This paper explores the potential effectiveness of cross-link tracking for reducing trajectory uncertainty and improving spacecraft-to-probe pointing.

DAVINCI↗
NASA NTRSDate not supplied

Measurement Accuracy and Uncertainty Analysis of the X-59 Air Data Probe Calibration Test Entry One

The X-59 is being developed to demonstrate quiet sonic boom technology. Data was obtained via two test entries in the NASA Glenn Research Center’s 8- by 6-Foot Supersonic Wind Tunnel to calibrate the X-59’s nose air data probe. The first entry tested two theoretically identical probes with the intention of one of the probes becoming the primary X-59 nose air data probe flight hardware and the other becoming a backup. A measurement accuracy and uncertainty analysis was performed on data obtained from the first test entry. The analysis showed that the uncertainties in the probe pressures were nearly identical for the two probes, with an average difference of 2.51 x 10-5 for the non-dimensional total pressure and 2.88 x 10-5 for the non-dimensional static pressures. The analysis also showed that the uncertainty in the probe yaw and pitch angles were 0.00034° and 0.01416°, respectively. This gives confidence in the X-59’s flight air data system.

Air Data Probe↗
NASA NTRS2023

Measurement Accuracy and Uncertainty Analysis of the X-59 Air Data Probe Calibration Test Entry One

The X-59 is being developed to demonstrate quiet sonic boom technology. Data was obtained via two test entries in the NASA Glenn Research Center’s 8- by 6-Foot Supersonic Wind Tunnel to calibrate the X-59’s nose air data probe. The first entry tested two theoretically identical probes with the intention of one of the probes becoming the primary X-59 nose air data probe flight hardware and the other becoming a backup. A measurement accuracy and uncertainty analysis was performed on data obtained from the first test entry. The analysis showed that the uncertainties in the probe pressures were nearly identical for the two probes, with an average difference of 2.51 x 10 -5 for the non-dimensional total pressure and 2.88 x 10 -5 for the non-dimensional static pressures. The analysis also showed that the uncertainty in the probe yaw and pitch angles were 0.00034° and 0.01416°, respectively. This gives confidence in the X-59’s flight air data system.

Air Data Probe↗
NASA NTRS1965

Optical output enhances flowmeter accuracy

Magnetic flowmeter with a direct-coupled optical output increases accuracy and operates independently of other system inputs. The design includes simple external adjustment and signal amplitude control.

Wolpin, E. G.↗
NASA NTRS1966

Specimen Holder Design Improves Accuracy of X-Ray Powder Analysis

Specimen holder for X ray diffraction analysis presents the specimen to the incident X rays in a curvature. This permits the use of an X ray beam having a larger divergence angle, the beam intensity is increased, and the statistical accuracy of analysis is improved.

Mack, M.↗