Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ultraviolet light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Operating Lifetime Study of Ultraviolet (UV) Light-Emitting Diode (LED) Products

Light-emitting diodes (LEDs) can emit radiation that spans the range from near infrared (IR) to all three bands of ultraviolet (UV) radiation: UV-A, UV-B, and UV-C. This report focuses on LEDs that emit in one of the three UV bands because they have the potential to displace lowpressure mercury vapor (LPMV) lamps in a variety of industrial processes, including ink and adhesive curing, medical procedures, and germicidal disinfection. However, before emerging UV LED technologies can displace LPMV lamps, the efficiency and reliability of these sources must meet the user’s expectations in each application. An earlier report focused on the construction and initial performance of commercial UV LED products in radiometric and current-voltage (IV) tests [1]. This report focuses on the long-term performance and reliability of the same set of commercial products. The intent of this report is to provide to the lighting industry a benchmark of the state of UV LEDs as of mid-2021 when these products were purchased. Understanding the failure modes and failure rates of UV LEDs is important in improving UV product reliability at the LED, lamp, and luminaire level and is critical to developing products with higher efficiency, lower carbon footprint, and significantly reduced environmental impact than LPMV lamps.

42 ENGINEERING↗

Constraints on decaying neutrinos from the far-ultraviolet extragalactic background light

We consider light neutrinos as dark matter candidates, concentrating on those proposed by Sciama, with rest energies near 30 eV and decay lifetimes of (2 +/- 1) x 10 exp 23 s. Using equations developed by Wesson et al. (1987) for the visible extragalactic background light, and assuming that the neutrinos are clustered in galactic halos similar to that around our own Galaxy, we show that their decay would be capable of significant contributions to the far-ultraviolet background. Observations in this region by Martin and Bowyer (1989) limit the possible mass of the neutrino halos to 2 x 10 exp 11 M(solar), which is less than the required galactic 'missing mass'. In order to form galactic halos of mass 5 x 10 exp 11 M(solar), such neutrinos would have to decay with lifetimes of at least 3 x 10 exp 23 s to be consistent with the observations. Sciama's proposal remains marginally viable, but more observational data will test it and similar neutrino models critically.

Overduin, J. M.↗

Far-ultraviolet diffuse galactic light

Diffuse galactic light is detected at very low galactic latitudes, and useful upper limits are obtained at moderate and high galactic latitudes. Together, these data indicate that the albedo of the interstellar grains is high (a greater than 0.5) and that the grains very strongly (g greater than 0.7) forward-scatter far-ultraviolet radiation.

Henry, R. C.↗

The ultraviolet and visible light variability of BP Tauri - Possible clues for the origin of T Tauri star activity

BP Tau is a moderate-strength T Tauri star, which has previously been studied photometrically by Vrba et al. (1986, 1989) and shown to have a 7.6-day light cycle. Here, BP Tau was reobserved in order to monitor this star with the IUE satellite. In conjunction with the UV spectroscopy, nearly simultaneous ground-based optical photometry was also obtained. At optical wavelengths, the star was initially found to be varying with a period of 7.6 days. This variability suddenly vanished and was followed by a quiescent state that lasted about 11 days. The star then resumed its variability with a period of about 6.1 days. The UV continuum and most of the UV emission lines appeared to vary in phase with the optical flux. No variations were observed on the very short timescales ranging from several hours to half a day, expected on the basis of axisymmetric, quasi-steady-state accretion disk models of T Tauri stars. However, the nearly week-long variations that were observed may be consistent with a magnetically buffered accretion model, which has been proposed by Uchida and Shibata.

Simon, Theodore↗

Tracking Nonradial Outflows in Extreme Ultraviolet and White Light Solar Images

Understanding the solar corona requires knowledge of its dynamics through its various layers and subsequent connectivity to the heliosphere. This requires understanding the nature of the outflows and the physical transitions through the middle corona (∼1.5–6.0 Rs). While this region is still inaccessible to in situ measurements, remote sensing observations are available, but their interpretation can be controversial due to line-of-sight effects and the nonradial motion of outflowing structures close to the Sun (≤3.0 Rs). In this work, we describe a method to mitigate these challenges by generating nonradial height–time profiles of outflows by using advanced image processing techniques. The northern and southern boundaries of a large equatorial streamer during the 2008 solar minimum were identified in STEREO/SECCHI solar images, using two different methodologies based on thresholds of brightness and piecewise polynomial function fitting. To address line-of-sight issues, we used tomographic reconstruction of the 3D distribution of the coronal electron density based on SECCHI/COR2 images. Spectral analysis of the time series of the position angle of the streamer boundary revealed its oscillatory nature at some heights at 36–48 and 10.5–14.6 hr. Dividing the distance between the northern and southern streamer boundaries in equal parts at each height, we obtained nonradial height–time paths from which we generated nonradial profiles of corona/solar wind plasma outflow. We tracked outflows as they moved uninterruptedly from the Sun in EUVI, through COR1 and into COR2. Finally, we discuss the preliminary results of nonradial plane-of-sky velocities for a coronal mass ejection and two small-scale features.

Nathalia Alzate↗

Penetrant-Indication-Measuring Compass

Modified drafting compass well suited to measurement of length of crack or width of area stained by penetrant-dye-inspection method. Equipped with any of variety of standard curved or straight pointed tips. Modification consists in coating tips with dye that fluoresces light pink under same ultraviolet inspection light causing penetrant dye to fluoresce yellow green. Used in locations inaccessible to conventional fluorescent comparator. Eliminates errors of optical distortion in comparator, also eliminates errors of interpolation.

Schaefer, Lloyd↗

Infrared photometry of the X-ray binary 2A 1822-371 - A model for the ultraviolet, optical, and infrared light curve

The X-ray source 2A 1822-371 may be prototypical of a class of accreting close binary systems in which the X-ray emission is diffused by a cloud of ionized material which is associated with the accretion disk. The present investigation provides a report on infrared photometry of 2A 1822-371 in the J (1.25 micrometer), H (1.65 micrometer), and K (2.2 micrometer) bands. A complete 5.57 hr light curve has been obtained at J which makes it possible to extend the investigations of the energy dependence of the ultraviolet and optical curve begun by Mason and Cordova (1982). The work conducted by White and Holt (1982) is extended to the long wavelength light curve by incorporating the influence of emission from the inner and outer rim of the disk and from the companion star. Including such effects, and assuming that reprocessed X rays are the major source of light at wavelengths greater than 1100 A, it is found possible to reproduce the morphology and energy dependence which is observed in the light curve of 2A 1822-371 from the far-ultraviolet to the near-infrared.

Mason, K. O.↗

OAO-2 observations of the zodiacal light

Photometric measurements of the night sky brightness have been obtained at twelve wavelengths between 1000 A and 4300 A from above the earth's atmosphere. A preliminary analysis of the data reveals a component of the sky brightness with ecliptic symmetry and an intensity distribution similar to that of the zodiacal light. The ultraviolet spectrum of the zodiacal light can be closely approximated with a two component model in which one component has an albedo proportional to the wavelength lambda and the other component has a scattering efficiency proportional to lambda to lbe minus 19 power.

Lillie, C. F.↗

Evolution of macromolecular dust: Far-ultraviolet spectral dust extinction and gas absorption of stellar light as measured with the Hopkins Ultraviolet Telescope

From far-ultraviolet (FUV) spectra of B stars taken with the Hopkins Ultraviolet Telescope (HUT) and Voyager space observations, we determine the far-ultraviolet extinction by Galactic dust and hydrogen absorption in the local spiral-arm clouds towards HD 25443 (B0.5 III), HD 37903 (B1.5 V), and HD 200775 (B3 Ve). We find that the (n (H)) = 1.3 cu cm and number fraction (f = 0.31) of H atoms in molecular hydrogen relative to the total hydrogen indicates a mostly diffuse medium toward HD 25443. We also determine f = 0.56 for the gas in the photodissociation region (PDR) in front of HD 37903 and f approximately equals 0.36 for the HD 200775 PDR. The inferred ratios of N(H2)/I(CO) = 2.4 to 2.8 x 10(exp 20)/K(km/s)/sq cm for cool gas in dark clouds agree with previous canonical estimates of N(H2)/I(CO) = 2 to 3 x 10(exp 20)/K(km/s)/sq cm and support the use of the ratio for determining masses of molecular clouds. We find that the shape and strength of the HD 25443 FUV extinction is the same as a diffuse-medium mean extinction (R(sub nu) = 2.95) extrapolated from mid-UV wavelengths (normal). The HD 37903 FUV extinction through a bright H2 photodissociation region is higher than a mean FUV extinction(R(sub nu) = 4.11), as is the HD 200775 extinction. Another star from the literature rho Oph, probes the dense medium and exhibits an FUV extinction of normal mean strength (R(sub nu) = 4.55) but steeper shape. The normal FUV -extinction of HD 25443 implies that the small FUV-extinction dust in the diffuse medium forms in p art from larger grains as the grains shatter under shocks. The normal strength of the rho Oph FUV-extinction indicates that the minute dust condenses onto or coagulates into larger grains in the dense medium. The high extinction deviation of the HD 37903 PDR (and HD 200775 PDR) shows that FUV radiation from hot stars with T(sub eff) approximately equals 20,000 to 23,000 K in PDRs can evaporate some of the FUV-extinction dust from grain surfaces. In contrast, previously measured extinctions in Galactic H(+) (H II) regions shows that FUV radiation at T(sub eff) greater than 25,000 K can destroy some of the dust in H(+) regions. Thus, some of the FUV-extinction dust is highly volatile. We find that the dust carrier of the variable FUV-extinction is correlated (r = 0.99) with the mid-IR (12 micrometers) radiation from hydrocarbon dust. The volatile FUV-extinction component could thus be due to minute hydrocarbon dust particles or macromolecules, probably PAHs, which are known to condense onto larger grains in the dense medium. Larger grains compsed of PAHs clustered into a solid could thus produce the steep FUV extinction of the rho Oph dense medium. After exposure to FUV photons wihtin approximately 1 pc of HD 37903, PAHs with about 30 carbon atoms would evaporate off the larger grains, increasing gaseous PAH abundance by approximately 14%. Also, after receiving shocks in the diffuse medium toward HD 25443, the larger hydrocarbon grains would shatter into PAH molecules. In summary, as the Galactic medium cycles betwee n the diffuse and dense medium, hydrocarbon dust cycles into and out of larger grains under the influence of shocks, radiation, and condensation.

Buss, Richard H., Jr.↗

Look Sharp While Seeing Sharp

The two scientists James B. Stephens and Dr. Charles G. Miller were tasked with studying the harmful properties of light in space, as well as the artificial radiation produced during laser and welding work, for the purpose of creating an enhanced means of eye protection in industrial welding applications. While working to apply their space research to these terrestrial applications, Stephens and Miller became engrossed with previously discovered research showing evidence that the eyes of hawks, eagles, and other birds of prey contain unique oil droplets that actually protect them from intensely radiated light rays (blue, violet, ultraviolet) while allowing vision-enhancing light rays (red, orange, green) to pass through. These oil droplets absorb short wavelength light rays which, in turn, reduce glare and provide heightened color contrast and definition for optimal visual acuity. Accordingly, birds of prey possess the ability to distinguish their targeted prey in natural surroundings and from great distances. Pairing the findings from their initial studies with what they learned from the bird studies, the scientists devised a methodology to incorporate the light-filtering/vision-enhancing dual-action benefits into a filtering system, using light-filtering dyes and tiny particles of zinc oxide. (Zinc oxide, which absorbs ultraviolet light, is also found in sunscreen lotions that protect the skin from sunburn.)

Source record↗

VUV light collection enhancement with metasurface lenses

Vacuum-ultraviolet (VUV) light has applications in many areas of fundamental research and technology, including high-energy physics (HEP) experiments and especially those based on scintillation of noble elements (xenon and argon).There are persistent challenges associated with the detection of the VUV photons in particle detectors, e.g. strong absorption by structural materials and low detection efficiency of the photosensors.Metasurfaces are relatively novel nano-fabricated devices which offer unprecedented control of light with a wide field of view and diffraction-limited focusing.This contribution will present the first linear metasurface lens operating in the VUV spectral range with the measured diffraction efficiencies above 50%.The design and fabrication processes will be described in detail, as well as the characterization measurements, and possible applications in the HEP experiments will be discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Micro-Spectrometer for Resource Mapping in Extreme Environments

Measurements and analyses of resources within permanently shadowed craters and along steep embankments on extraterrestrial surfaces pose extreme challenges since astronauts and rovers cannot access them. However, these areas offer the potential for the greatest scientific returns. Researchers at the NASA Langley Research Center (LaRC) invented a deployable wireless micro-spectrometer that can access those challenging areas and deliver telemetry data to a receiver safely outside those extreme environments. The micro-spectrometers are designed for deployment by an astronaut, a rover, or a lander flying overhead. This device can also be installed on rover tires, under the astronaut’s shoes, or on a cane stick. The bullet-like, expendable micro-spectrometer can penetrate into soil to spectrally identify the components of soil, such as water, He-3, or other minerals. The signals from the soil assay data are transmitted to a mother station through a telemetry system. This LaRC developed micro-spectrometer bullet consists of micro-spectrometer optics with an all-imbedded, burst-mode, light-emitting-diode ultraviolet (LED UV) light source, a super-capacitor with control electronics, and telemetry electronics. Prototypes have been fabricated to demonstrate a spectral assay of soil components. Further maturation of this technology would be necessary for demonstrations on the Moon.

micro-spectrometer↗

Vacuum-Ultraviolet Intensity-Calibration Standard

Portable light source enables calibration of spectrometers. Vacuum Ultraviolet Light (40 to 200 nm) produced in electron-impact emission chamber by leading beam of gas across electron beam. Photons observed at right angles to electron-beam axis. Previously, there were blackbody standards in visible and near ultraviolet, but no intensity-calibration standards in VUV.

Ajello, J. M.↗

Quality Control of Silicon Sensor Modules for Particle Detectors

The High-Luminosity Large Hadron Collider (HL-LHC) will produce a higher rate of particle collisions than the current Large Hadron Collider (LHC), requiring important upgrades to the Compact Muon Solenoid (CMS) to handle an increased amount of data. An important upgrade is the Phase-2 Outer Tracker Upgrade, which consists of 13,000 silicon sensor modules made of two parallel silicon sensors and readout electronics. These modules undergo careful quality control checks both during and after module assembly to ensure precise and reliable detector performance. This project focuses on precision testing for quality control of silicon sensor modules at Fermilab. Hands-on work includes visual inspection, current-voltage testing, module testing, and ultraviolet (UV) light exposure of modules showing abnormal current-voltage behavior. The ultraviolet exposure process improves the abnormal sensor readout data by placing the selected sensor side of the module directly under the UV light inside a controlled box. In addition to laboratory testing and ultraviolet experiments, I developed a Python-based data tool that connects to a module database and allows selected testing conditions and module information to be retrieved and displayed efficiently. These different testing procedures, experimental processes, and computational tools support the broader goal of identifying module issues and improving modules that will be used in the CMS Outer Tracker Phase-2 Upgrade.

Siddiqui, Hooriya [DuPage Coll.] (ORCID:0009000151↗

Quality Control of Silicon Sensor Modules for Particle Detectors

The High-Luminosity Large Hadron Collider (HL-LHC) will produce a higher rate of particle collisions than the current Large Hadron Collider (LHC), requiring significant upgrades to the Compact Muon Solenoid (CMS) to handle the increased amount of data. An important upgrade is the Phase-2 Outer Tracker Upgrade, which consists of 13,000 silicon sensor modules made of two parallel silicon sensors and readout electronics. These modules undergo careful quality control checks both during and after module assembly to ensure precise and reliable detector performance. This project focuses on precision testing for quality control of silicon sensor modules at Fermilab. Hands-on work includes visual inspection, current-voltage testing, module testing, and ultraviolet (UV) light exposure of modules showing abnormal current-voltage behavior. The ultraviolet exposure process improves the abnormal sensor readout data by placing the selected sensor side of the module directly under the UV light inside a controlled box. In addition to laboratory testing and ultraviolet experiments, I developed a Python-based data tool that connects to a module database and allows selected testing conditions and module information to be retrieved and displayed efficiently. These different testing procedures, experimental processes, and computational tools support the broader goal of identifying module issues and improving modules that will be used in the CMS Outer Tracker Phase-2 Upgrade.

Siddiqui, Hooriya [DuPage Coll.; Fermilab] (ORCID:↗