Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thermal Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Dynamic spectral characteristics of thermal models for solar hard X-ray bursts

It is proposed that the source for solar hard X-ray bursts may consist of a distribution of many small impulsively-heated kernels, each cooled by anomalous conduction, with lifetimes shorter than current burst data temporal resolution. The dynamic spectra of bursts are governed by the dynamic evolution of the kernel production process, such as magnetic-field dissipation in the tearing mode. An integral equation is formulated, the solution of which yields information on this kernel production process from dynamic burst spectra, for any kernel model.

Brown, J. C.↗

Thermal modeling of lithium systems

The heat generation during cell discharge and its distribution are discussed. The effects of casing materials, thickness of current collectors, discharge environments, and entropies are described. A number of calorimetric experiments are described which quantify the heat during cell discharge.

Kim, K. Y.↗

Application of thermal model for pan evaporation to the hydrology of a defined medium, the sponge

A technique is presented which estimates pan evaporation from the commonly observed values of daily maximum and minimum air temperatures. These two variables are transformed to saturation vapor pressure equivalents which are used in a simple linear regression model. The model provides reasonably accurate estimates of pan evaporation rates over a large geographic area. The derived evaporation algorithm is combined with precipitation to obtain a simple moisture variable. A hypothetical medium with a capacity of 8 inches of water is initialized at 4 inches. The medium behaves like a sponge: it absorbs all incident precipitation, with runoff or drainage occurring only after it is saturated. Water is lost from this simple system through evaporation just as from a Class A pan, but at a rate proportional to its degree of saturation. The contents of the sponge is a moisture index calculated from only the maximum and minium temperatures and precipitation.

Trenchard, M. H.↗

Thermal Modeling of Bridgman Crystal Growth

Heat Flow modeled for moving or stationary rod shaped sample inside directional-solidification furnace. Program effectively models one-dimensional heat flow in translating or motionless rod-shaped sample inside of directionalsolidification furnace in which adiabatic zone separates hot zone and cold zone. Applicable to systems for which Biot numbers in hot and cold zones are less than unity.

Cothran, E.↗

Synthesis of proterozoic data as a prerequisite for tectonic and thermal modeling

Rocks of the Pongola supergroup form an elongate belt in the Archean Kaapvaal Caton of southern Africa. Because these rocks exhibit many features that are characteristic of rocks deposited in continental rifts, it is suggested that the Pongola supergroup was deposited in such a rift. The age of these rocks (approximately 3.0 Ga) makes the Pongola structure the world's oldest well-preserved rift so far recognized, and comparison of the Pongola Rift with other rifts formed more recently in Earth history reveals striking similarities. Rocks of the Ventersdorp Supergroup were deposited in a system of northeast trending grabens on the Kaapvaal Craton approximately 2.64 Ga ago. It is suggested that it was this collision which initiated the Ventersdorp rifting. The Ventersdorp rift province is related to an extension in the Kaapval Craton associated with the collision.

Burke, K. C.↗

Recent thermal models of the chromosphere

The paper describes recent research on the calculation of solar chromospheric models. The models included here are based on the observed spectrum, and on the assumption of hydrostatic equilibrium. The calculations depend on realistic solutions of the radiative transfer and statistical equilibrium equations for optically thick lines and continua, and on including the effects of large numbers of lines throughout the spectrum. Although spectroheliograms show that the structure of the chromosphere is highly complex, one-dimensional models of particular features are reasonably successful in matching observed spectra. There has been considerable recent progress in applying such models to the interpretation of chromospheric observations.

Avrett, E. H.↗

Quasi-thermal models

Non-local thermodynamics equilibrium (LTE) effects in the photosphere; recent research on the chromosphere of the M and C stars; and elementary shock-waves and pulsation theories and their applications to Mira long-period variables are discussed.

Delareza, Ramiro↗

Photochemical and thermal modeling in the early atmosphere of the earth

The simplest carbon compounds, present in the terrestrial and planetary atmospheres, exhibit a wide range of oxidation states, carbon dioxide and methane being the most oxidized and the most reduced form of carbon, respectively. The question arises as to the origin and the interconversion among the carbon species. The chemical pathways for the conversion of CH4 to CO and CO2 are for the most part known. The reverse process, the reduction of CO to CH4 is however, poorly understood. A new reaction is proposed, H2CO + H + M yields CH3O + M, which might play a fundamental role in the reduction of CO or CH4. An update is presented of nitrile photochemistry on Titan.

Yung, Yuk L.↗

Energy balance in the solar transition region. I - Hydrostatic thermal models with ambipolar diffusion

The energy balance in the lower transition region is analyzed by constructing theoretical models which satisfy the energy balance constraint. The energy balance is achieved by balancing the radiative losses and the energy flowing downward from the corona. This energy flow is mainly in two forms: conductive heat flow and hydrogen ionization energy flow due to ambipolar diffusion. Hydrostatic equilibrium is assumed, and, in a first calculation, local mechanical heating and Joule heating are ignored. In a second model, some mechanical heating compatible with chromospheric energy-balance calculations is introduced. The models are computed for a partial non-LTE approach in which radiation departs strongly from LTE but particles depart from Maxwellian distributions only to first order. The results, which apply to cases where the magnetic field is either absent, or uniform and vertical, are compared with the observed Lyman lines and continuum from the average quiet sun. The approximate agreement suggests that this type of model can roughly explain the observed intensities in a physically meaningful way, assuming only a few free parameters specified as chromospheric boundary conditions.

Fontenla, J. M.↗

Two-dimensional thermal modeling of power monolithic microwave integrated circuits (MMIC's)

Numerical simulations of the two-dimensional temperature distributions for a typical GaAs MMIC circuit are conducted, aiming at understanding the heat conduction process of the circuit chip and providing temperature information for device reliability analysis. The method used is to solve the two-dimensional heat conduction equation with a control-volume-based finite difference scheme. In particular, the effects of the power dissipation and the ambient temperature are examined, and the criterion for the worst operating environment is discussed in terms of the allowed highest device junction temperature.

Fan, Mark S.↗

A thermal model for the seasonal nitrogen cycle on Triton

The seasonal N2-cycle model presently used to characterize such observed phenomena on Triton as atmospheric pressure and surface albedo features at the time of the Voyager encounter incorporates diurnal and seasonal subsurface heat conduction, and can account for the heat capacity of N2 frost deposits. The results obtained by this model differ from those of previous studies in that they do not predict the seasonal freezing-out of the Triton atmosphere; even for a wide range of input parameters, the bright southern polar cap is seen as rather unlikely to be N2. The results support the microphysical arguments for the presence of either dark or smooth translucent N2 frosts on the Triton surface.

Hansen, Candice J.↗

Thermal modelling of an AMTEC recirculating cell

A modeling program was developed to determine the impact of various design parameters on the operation of an AMTEC system. Temperature profiles generated by the modeling program were compared to actual experimental data to verify the model accuracy. The model was then extended to predict the impact of device design on operational performance. The effect of heat loss from the liquid sodium supply end was studied for this paper.

Suitor, J. W.↗

Venusian pancake domes: Insights from terrestrial voluminous silicic lavas and thermal modeling

The so-called 'pancake' domes, and several other volcanoes on Venus, appear to represent large extrusions of silicic lava. Similar voluminous rhyolite lava flows, often associated with mantle plumes, are known on Earth. Venus' high ambient temperature, and insulation by the dome's brecciated carapace, both act to prolong cooling of a dome's interior, allowing for episodic lava input over an extended period of time. Field relations and aspect ratios of terrestrial voluminous rhyolite lavas imply continuous, non-episodic growth, reflecting tapping of a large volume of dry, anatectic silicic magma. Petrogenetically, the venusian domes may be analogous to chains of small domes on Earth, which represent 'leakage' of evolved material from magma bodies fractionating from much more mafic liquids.

Manley, Curtis R.↗

Thermal modeling of NiH2 batteries

The following are discussed: NiH2 battery mission and environment; NiH2 cell heat dissipation; Nodal software; model development general philosophy; NiH2 battery model development; and NiH2 experimental developments.

Ponthus, Agnes-Marie↗

Verification of RSRM Nozzle Thermal Models With ETM-3 Aft Exit Cone In-depth Temperature Measurements

One of the goals of the Engineering Test Motor (ETM-3) static test was to verify analytical models through the use of instrumentation that provide real-time transient temperature response of ablating phenolic liners. Accurate measurement of in-depth temperature is critical for validating the analytical models and assessing design safety margins for nozzle insulation materials. Recent developments of in-depth thermocouple plugs have been made to more accurately measure temperature response of nozzle Liners. Thermocouple plugs were installed at two axial stations (four plugs circumferentially at each station) near the end of the ETM-3 nozzle aft exit cone to gather temperature histories during and after motor operation. The thermocouple plugs were placed at depths that bounded the reusable solid rocket motor nominal measured char depth in order to portray the carbon phenolic temperature response during the charring process. The data were used to verify the analytical models during motor operation and to better define char penetration during heat soak after motor burn out.

Maw, Joel F.↗