Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Test Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Magnetization degree at the JET base of M87 derived from the event horizon telescope data: Testing the magnetically driven JET paradigm

We explore the degree of magnetization at the jet base of M87 by using the observational data of the event horizon telescope (EHT) at 230 GHz obtained by Doeleman et al. By utilizing the method in Kino et al., we derive the energy densities of the magnetic fields (U{sub B}) and electrons and positrons (U{sub ±}) in the compact region detected by EHT (the EHT region) with its FWHM size 40 μas. First, we assume that an optically thick region for synchrotron self-absorption (SSA) exists in the EHT region. Then, we find that the SSA-thick region should not be too large, in order to not overproduce the Poynting power at the EHT region. The allowed ranges of the angular size and the magnetic-field strength of the SSA-thick region are 21 μas⩽θ{sub thick}⩽26.3 μas and 50 G⩽B{sub tot}⩽124 G, respectively. Correspondingly, U{sub B}≫U{sub ±} is realized in this case. We further examine the composition of plasma and energy density of protons by utilizing the Faraday rotation measurement at 230 GHz obtained by Kuo et al. Then, we find that U{sub B}≫U{sub ±}+U{sub p} still holds in the SSA-thick region. Second, we examine the case when the EHT region is fully SSA-thin. Then, we find that U{sub B}≫U{sub ±} still holds unless protons are relativistic. Thus, we conclude that the magnetically driven jet scenario in M87 is viable in terms of energetics close to the Innermost Stable Circular Orbit scale unless the EHT region is fully SSA-thin and relativistic protons dominated.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1986

Unstalled flutter stability predictions and comparisons to test data for a composite prop-fan model

The aeroelastic stability analyses for three graphite/epoxy composite Prop-Fan designs and post-test stability analysis for one of the designs, the SR-3C-X2 are presented. It was shown that Prop-Fan stability can be effectively analyzed using the F203 modal aeroelastic stability analysis developed at Hamilton Standard and that first mode torsion-bending coupling has a direct effect on blade stability. Positive first mode torsion-bending coupling is a destabilizing factor and the minimization of this parameter will increase Prop-Fan stability. It was also shown that Prop-Fan stability analysis using F203 is sensitive to the blade modal data used as input. Calculated blade modal properties varied significantly with the structural analysis used, and these variations are reflected in the F203 calculations.

Turnberg, J. E.↗
NASA NTRS2002

Collecting Real-Time Test Data

The TAXI Direct-to-Direct interface, in conjunction with the Disk Recording System (DRS) software developed by the SSC Boeing group, supplies a solution that provides higher integrity data that can be processed and made available to the customer with hours. The TAXI Direct-to-Direct interface is a special purpose interface solution developed by ISC for demultiplexing data from a Racal Storeplex (or equivalent) multichannel recorder onto one or more hard discs that reside in, and/or are controlled by, a personal computer (PC). (The name "TAXI" is the acronym for "transparent asynchronous transceiver interface"). The installation of the TAXI Direct-to Disk interface, in conjunction with other modifications, causes the transfer of data to be recorded directly to disk so it can be extracted and analyzed after the test.

Source record↗
DOE OSTI2013

Automated Nuclear Data Test Suite

Provides python routines to create a database of test problems in a user-defined directory tree, to query the database using user-defined parameters, to generate a list of test urns, to automatically run with user-defined particle transport codes. Includes natural isotope abundance data, and a table of benchmark effective for fast critical assemblies. Does not include input decks, cross-section libraries, or particle transport codes.

Source record↗
NASA NTRS2015

Reducing the Effect of Transducer Mount Induced Noise on Aeroacoustic Wind Tunnel Testing Data with a New Transducer Mount Design

Flight vehicle aeroacoustic environments induced during transonic and supersonic flight are usually predicted by subscale wind tunnel testing utilizing high frequency miniature pressure transducers. In order to minimize noise induced by the measurement itself, transducer flush mounting with the model surface is very important. The National Aeronautics and Space Administration (NASA) has accomplished flushness in recent testing campaigns via use of a transducer holder that can be machined and sanded. A single hole in the holder allows the flow medium to interact with the transducer diaphragm. Noise is induced by the resulting cavity however, and is a challenge to remove in post-processing. A new holder design has been developed that minimizes the effects of this transducer mount induced noise (XMIN) by reducing the resonance amplitude or increasing its resonance frequency beyond the range of interest. This paper describes a test conducted at the NASA/George C. Marshall Space Flight Center Trisonic Wind Tunnel intended to verify the effectiveness of this design. The results from this test show that this new transducer holder design does significantly reduce the influence of XMIN on measured fluctuating pressure levels without degrading a transducer's ability to accurately measure the noise external to the model.

Herron, Andrew J.↗
NASA NTRS1989

Locating Damaged Members in a Truss Structure Using Modal Test Data: a Demonstration Experiment

On-orbit assessment of large flexible space truss structures can be accomplished, in principle, with dynamic response information, structural identification methods, and model correlation techniques which produce an adjusted mathematical model. In a previously developed approach for damage location, an optimal update of the structure model is formed using the response data, then examined to locate damaged members. An experiment designed to demonstrate and verify the performance of the on-orbit assessment approach uses a laboratory scale model truss structure which exhibits characteristics expected for large space truss structures. Vibration experiments were performed to generate response data for the damaged truss. The damage location approach, analytical work performed in support of the vibration tests, the measured response of the test article, and some preliminary results are described.

Smith, Suzanne Weaver↗
DOE OSTI2016

Nuclear Data Testing Of Pu{sup 239} CIELO Evaluation With NDaST

Within the Collaborative International Evaluated Library Organisation (CIELO) project a coordinated effort is being made amongst the different nuclear data evaluation projects, ENDF, JEFF, JENDL etc. to improve the cross sections of six of the most important isotopes, Pu{sup 239}, U{sup 235}, U{sup 238}, Fe{sup 56}, O{sup 16} and H{sup 1}. Recently developed, the Nuclear Data and Sensitivity Tool (NDaST) is an online tool (http://www.oecd-nea.org/ndast/) that allows nuclear data evaluators to get rapid feedback about the consequences of changes to nuclear data on integral experiment benchmarks that exist within the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and International Reactor Physics Evaluation (IRPhE) Project handbooks. NDaST links the thousands of nuclear data sensitivity profiles in the Database for ICSBEP (DICE) and the IRPhE Database and Analysis Tool (IDAT), with the nuclear data viewing tool JANIS. NDaST can be used to provide timely feedback to CIELO participants. Normally an evaluator changes the ENDF/B files based on differential data, and subsequently hands the new evaluation to testers who give feedback on the performance of the new evaluation in terms of accurately predicting the integral benchmark results. This process is often slow. With accurate sensitivity coefficients it is feasible to predict the results of changes to differential data without performing the direct substitution, by simply multiplying the change in cross section with the sensitivity. Furthermore, when multiple aspects of the file are changed simultaneously, the impact of each individual change can be muddled in the substitution testing. NDaST when used in conjunction with direct perturbation testing can help provide feedback as to which cross section changes are driving changes in the benchmarks. In this paper we focus on Pu{sup 239}, and comparing the NDaST predictions of CIELO files to direct substitution. (authors)

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2024

L4-3 Developing DOE M441.1-1 Compliant Container Components: Filter Cup Experimental Fixture Test Data Verification

This document serves to provide technical documentation and justification for using the Filter Cup Experimental Fixture (FCEP) for filter efficiency and pressure drop testing in the Enhanced Filter Test System (EFTS). This document assumes that the reader has prior knowledge related to both of these systems, as well as the SAVY-4000® nuclear material container series filter technology.

42 ENGINEERING↗
NASA NTRSDate not supplied

Frequency Domain Quasi Maximum Likelihood Identification of Low Order Aeroservoelastic Models from Flight-Test Data

In this paper a quasi maximum likelihood method for estimating a low order model of a flexible vehicle has been developed and demonstrated. The quasi maximum likelihood method uses a large number of sensors to estimate the parameters and covariance in a method consistent with the maximum likelihood filter-error method. The cost function has been defined in a frequency domain to improve computational efficiency and to enable estimation of an unstable plant. The method has been demonstrated using flight data from the National Aeronautics and Space Administration X-56A Multi-Utility Technology Testbed flex wing tests, which include unstable flutter modes. The method was able to effectively estimate the frequency and damping of the dynamics of the aircraft and generate a transfer function that is useful for control system evaluations.

Jeffrey Ouellette↗
NASA NTRS1979

Determination of subcritical frequency and damping from B-1 flight flutter test data

The application of the time-lag products correlation/frequency analysis procedure to determine subcritical frequency and damping from structural response measurements made during flight flutter test of the B-1 prototype airplane is described. The analysis procedure, the test airplane, and flight test procedures are discussed. Summary frequency and damping results are presented for six transonic flight conditions. Illustrative results obtained by applying various options and variations of the analysis method are included for one flight condition.

Dobbs, S. K.↗
NASA NTRS2015

Characterization of Pump-Induced Acoustics in Space Launch System Main Propulsion System Liquid Hydrogen Feedline Using Airflow Test Data

High intensity acoustic edgetones located upstream of the RS-25 Low Pressure Fuel Turbo Pump (LPFTP) were previously observed during Space Launch System (STS) airflow testing of a model Main Propulsion System (MPS) liquid hydrogen (LH2) feedline mated to a modified LPFTP. MPS hardware has been adapted to mitigate the problematic edgetones as part of the Space Launch System (SLS) program. A follow-on airflow test campaign has subjected the adapted hardware to tests mimicking STS-era airflow conditions, and this manuscript describes acoustic environment identification and characterization born from the latest test results. Fluid dynamics responsible for driving discrete excitations were well reproduced using legacy hardware. The modified design was found insensitive to high intensity edgetone-like discretes over the bandwidth of interest to SLS MPS unsteady environments. Rather, the natural acoustics of the test article were observed to respond in a narrowband-random/mixed discrete manner to broadband noise thought generated by the flow field. The intensity of these responses were several orders of magnitude reduced from those driven by edgetones.

Eberhart, C. J.↗
DOE OSTI2022

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence Q - Raw Data

Sequence Q: Dynamic Inflow (P) This sequence was designed to characterize the dynamic inflow variation using the five-hole probes that extend upwind of the leading edge of the blade. This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speeds ranged from 5 m/s to 15 m/s, and data were collected at a 0° yaw angle. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to -99999.99 Nm. The teeter link load cell was pretensioned to 40,000 N. The blade pitch angle was changed from the initial tip pitch angle to the final tip pitch angle at the maximum rate of 67°/s. This angle was maintained for the specified delay time duration. Then the blade was pitched back to the initial pitch angle and held for the specified hold time. This was repeated 20 times. The campaign at 15 m/s was aborted early due to excessive low-speed shaft torque loads. The file length varied depending on the time required to obtain 20 pitch cycles for the specified range of angles. The name convention was the standard format, except for the short campaigns collected to ascertain the functionality of the instrumentation. These points were collected at a 3° pitch angle and use the characters REF in the four digits that normally represent yaw angle.

17 WIND ENERGY↗
DOE OSTI2024

Assessment of Accelerated Stress Testing Data for Silicon Photovoltaics Using Tensor Decomposition Methods

The photovoltaic (PV) industry is simultaneously targeting long warranties and new materials/designs for high-energy-yield modules, requiring an advanced methodology to forecast long-term durability of products with un-proven materials combinations. Extended, sequential, and combined stress testing methods are gaining popularity for assessing durability of PV modules/materials beyond the early-stage mortalities. Importantly, multiple degradation mechanisms can proceed simultaneously, and their separate contributions to the overall power loss should ideally be quantified. This work examines the use of data-driven tools towards developing a strategy for faster learning cycles in accelerated stress testing.

accelerated stress testing↗
DOE OSTI2022

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence N - Raw Data

Sequence N: Sin AOA, Rotating (P) This sequence was designed to quantify the blade 3-D unsteady aerodynamic response in the presence of rotational influences by varying blade pitch angle. Test sequence N used an upwind, rigid turbine with a 0° cone angle. The wind speed was 15 m/s, and the yaw angle was 0° throughout the sequence. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to –99999.99 Nm. The teeter link load cell was pre-tensioned to 40,000 N. Sinusoidal angle-of-attack histories were designed to emulate 2-D S809 dynamic data obtained at the Ohio State University (OSU) wind tunnel (Reuss Ramsey et al. 1995) and the 1P yawed flow angle-of-attack variations the turbine could be expected to encounter in routine operation. The reduced frequency (K), mean angle of attack (αm), and oscillation amplitude (αω) were computed for each of the five primary span locations. The file lengths varied according to the time required to complete 40 oscillations at the specified frequency. The file name convention used the sequence designation N, followed by two digits for the span location (30, 47, 63, 80, or 95), followed by two digits representing the condition specified in the test matrix, followed by the repetition digit. Due to time constraints, most of the test conditions corresponding to the 63% span location were eliminated. Test points with a static pitch angle of 3° were collected throughout the sequence to ascertain instrumentation fidelity.

17 WIND ENERGY↗
NASA NTRS1985

Structural analysis model validation using modal test data

The design of a structure which can survive a prescribed dynamic environment is generally based on the use of an analytical model of the structure. The modal test is employed to verify the analytical model. This paper is concerned with the involved validation process, taking into account modal test results from realistic complex spacecraft structural systems as examples to demonstrate the proposed validation procedure. Attention is given to a load analysis model definition, a pretest analysis and test/analysis model, and the correlation parameters. Coordinate transformation is considered along with mode identification, frequency orthogonality, effective mass, mode shape, local kinetic energy, modal force, strain energy, and modal forces by acceleration measurements. Two examples are used to illustrate the procedure.

Chen, J.-C.↗
NASA NTRS1994

Repeatability and uncertainty analyses of light gas gun test data

All large spacecraft are susceptible to high-speed impacts by meteoroids and pieces of orbiting space debris which can damage flight-critical systems and in turn lead to catastrophic failure. One way to obtain information on the response of a structure to a meteoroid impact or an orbital debris impact is to simulate the impact conditions of interest in the laboratory and analyze the resulting damage to a target structure. As part of the Phase B and C/D development activities for the Space Station Freedom, 950 impact tests were performed using the NASA/Marshall Space Flight Center (MSFC) light gas gun from 1985-1991. This paper presents the results of impact phenomena repeatability and data uncertainty studies performed using the information obtained from those tests. The results of these studies can be used to assess the utility of individual current and future NASA/MSFC impact test results in the design of long-duration spacecraft.

Schonberg, William P.↗