Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TWIST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Research turbine for high temperature core engine application. 1: Cold-airoverall performance of solid scaled turbine

A solid, half-scale model of a 50.8-cm (20-in) research turbine designed for a high temperature core engine application was investigated over a range of speeds and pressure ratios. The results of this test are presented. The effect of rotor blade twist was also investigated. At the design equivalent speed and specific work output, the total efficiency of the turbine with untwisted rotor blades was 87.1 percent; at the same pressure ratio the efficiency of the turbine with twisted rotor blades was 88.0 percent.

Szanca, E. M.↗
NASA NTRS1975

Broadband antenna systems for lightning magnetic fields

Broadband magnetic antenna systems suitable for recording submicrosecond field changes are described, and typical data from distant lightning are presented. Two types of systems are described, one with a high-impedance antenna loop connected to the integrator by a twisted pair of coaxial cables and another with the antenna loop and twisted signal loops formed from a single piece of coaxial cable. Data for correlated magnetic and electric field waveforms from lightning at a distance of 50 to 100 km are presented and are shown to be almost identical.

Krider, E. P.↗
NASA NTRS1976

Flutter and buckling of general laminated plates

An anisotropic buckling and flutter analysis is developed with allowance for both bending-extensional coupling and bending-twisting coupling within the framework of linear small deflection theory for simply supported general laminated plates. The extended Galerkin method is used to obtain approximate solutions to the coupled governing equations. The effects of various anisotropic stiffness parameters on the static and dynamic stability of laminated plates are evaluated, with particular emphasis on assessing the range of applicability of classical orthotropic plate theory. It is shown that bending-extensional coupling and bending-twisting stiffness terms have a destabilizing effect on buckling and flutter, the effect being more pronounced for a small number of layers. For symmetric plates, the number of layers required for orthotropic plate theory to be applicable is generally less for the buckling problem than for flutter. For square plates, aligning the fibers with the direction of airflow over the plate surface results in the highest flutter dynamic pressure.

Sawyer, J. W.↗
NASA NTRS1976

An experimental method to obtain the elastic strain energy function from torsion-tension tests

It is shown that by employing a torsion-tension test, it is possible to have a complete mapping near the origin of the two principal strain invariants associated with the rate of change of the strain energy function. However, the mathematical representation of the twist moment and normal forces vs strain and the strain energy function are complex. This problem is solved by using a set of solid cylindrical bars with different diameters such that the difference in diameter of two successive bars is small. The stress-strain equations can be grossly oversimplified by considering differences in twist moment and normal force as a function of difference in radius.

Peng, S. T. J.↗
NASA NTRS1976

Influence of blade characteristics on axial flow compressor noise

This experimental study was initiated as a result of earlier theoretical work which found that changes in the spanwise circulation distribution can have a significant influence on noise generation for the single rotor and for rotor-stator combinations. The experimental results presented here clearly show that the rotor noise, and especially the rotor-stator interaction noise, is affected by the type of radial loading, i.e., type of twist. Other blade parameters tested for their influence on far-field noise include rotor solidity, spacing between rotor and stator for twisted and untwisted blades, blade thickness, and stator chord length; radial effects on cutoff were also investigated.

Lumsdaine, E.↗
NASA NTRS1976

Supersonic pressure measurements and comparison of theory to experiment for an arrow-wing configuration

A wind tunnel test of an arrow-wing-body configuration consisting of flat and twisted wings, as well as leading- and trailing-edge control surface deflections, was conducted at Mach numbers from 1.54 to 2.50 to provide an experimental pressure data base for comparison with theoretical methods. Theory-to-experiment comparisons of detailed pressure distributions were made using a state-of-the-art inviscid flow, constant-pressure-panel method. Emphasis was on conditions under which this theory is valid for both flat and twisted wings.

Manro, M. E.↗
NASA NTRS1977

Measurements of helicopter rotor tip vortices

This paper presents results from a recent wind-tunnel investigation of model helicopter rotor tip vortices. Measurements were made of the vortex positions, core sizes, and velocity distributions. A laser velocimeter was used to make the measurements, and a minicomputer-based data system was used to process the data and to aid in controlling the experiment. The velocimeter, the data system, and the software developed for the minicomputer are briefly described. The rotors investigated were two-bladed, teetering rotors with diameters of 2.1 m. Two sets of blades were used, one set with zero twist and one set with -11 deg of linear twist. The vortex positions were obtained by making flow field traverses while strobing the data system at a fixed azimuth. Aging of a vortex element was also studied by following the convected element while strobing the data system at different azimuths. By this method, the effects on the vortex of a close interaction with a blade and another vortex were studied.

Biggers, J. C.↗
NASA NTRS1977

A review of advanced rotor research

This paper reviews advanced-rotor concepts including the advancing blade concept, the circulation control rotor, the X-wing rotor, the variable diameter rotor, the hingeless tilt rotor, the bearingless main rotor, the composite structures rotor, the variable geometry rotor, the multicyclic controllable pitch rotor, the multicyclic controllable twist rotor, and the live twist rotor. The rotor concepts are discussed in terms of performance (cruise speed, and lift/drag ratio) and dynamic loads and vibration.

Kelly, M. W.↗
NASA NTRS1978

Simple torsion test for shear moduli determination of orthotropic composites

By means of torsion tests performed on test specimens of the same material having a minimum of two different cross sections (flat sheet of different widths), the effective in-plane (G13) and out-of-plane (G23) shear moduli were determined for two composite materials of uniaxial and angleply fiber orientations. Test specimens were 16 plies (nominal 2 mm) thick, 100 mm in length, and in widths of 6.3, 9.5, 12.5, and 15.8 mm. Torsion tests were run under controlled deflection (constant angle of twist) using an electrohydraulic servocontrolled test system. In-plane and out-of-plane shear moduli were calculated from an equation derived in the theory of elasticity which relates applied torque, the torsional angle of twist, the specimen width/thickness ratio, and the ratio of the two shear moduli G13/G23. Results demonstrate that torsional shear moduli, G23 as well as G13, can be determined by simple torsion tests of flat specimens of rectangular cross section. Neither the uniaxial nor angleply composite material were transversely isotropic.

Sumsion, H. T.↗
NASA NTRS1979

Foldable beam

Articulated beam folds into helix around cylindrical hub without segments becoming twisted. Twisting motion that normally occurs when a structure is folded into helix is undesirable in segmented beam because it complicates joints between segments.

Crawford, R. F.↗
NASA NTRS1980

A tool for installation and removal of cylindrical baffles

Simple tool based on principle of automobile oil wrench slips over cylindrical thread-on baffle to install or remove it from baffle assembly. Tool consists of curled metal sheet brazed onto handgrip. Handgrip is adapted to be driven by wrench, ratchet, extension, torque wrench, or some other convenient tool. Clockwise twist of handgrip, tightens metal sheet around baffle to advance it into threaded joint. Counterclockwise twist loosens sheet for repositioning or tool removal.

Pessin, R.↗
NASA NTRS1978

Simple torsion test for shear moduli determination of orthotropic composites

The shear moduli G13 and G23 for two different composites (AS/3501 and T300/5209) of uniaxial and cross-ply fiber orientations were determined by torsion testing of flat specimens of rectangular cross section. Torsion tests were run under controlled angle of twist in an electro-hydraulic servo-controlled test system. Both laser and potentiometer methods of measuring the angle of twist were used. The in-plane shear modulus was calculated with a formula for transversally isotropic materials and a formula for orthotropic materials, while the out-of-plane shear modulus was calculated from the orthotropic material formula. Neither the uniaxial nor the angle-ply composite materials studied were transversely isotropic. The degree of anisotropy for the angle-ply materials was several times greater than that of the uniaxial composites. For specimens of uniaxial fiber orientation, the in-plane shear moduli could be calculated to a good approximation by using the isotropic formula and test machine deflection data.

Sumsion, H. T.↗
NASA NTRS1980

Multicyclic control of a helicopter rotor considering the influence of vibration, loads, and control motion

Weighted multiple linear regression is used to establish a transfer function matrix relationship between higher harmonic control inputs and transducer vibration outputs for a controllable twist rotor. Data used in the regression were taken from the test of a KAMAN controllable twist rotor conducted in the Ames Research Center's 40- by 80-Foot Wind Tunnel in June 1977. Optimal controls to minimize fixed system vibrational levels are calculated using linear quadratic regulatory theory with a control deflection penalty included in the performance criteria. Control sensitivity to changes in control travel, forward speed, and lift and propulsive forces is examined. It is found that the linear transfer matrix is a strong function of forward speed and a weak function of lift and propulsive force. An open-loop strategy is proposed for systems with limited control travel.

Brown, T. J.↗
NASA NTRS1980

Sunspots and the physics of magnetic flux tubes. X - On the hydrodynamic instability of buoyant fields

The hydrodynamics of cylindrical buoyant bubbles (magnetic flux tubes) in an atmosphere is examined. Their dynamical stability is considered, with particular attention to the Rayleigh-Taylor and Kelvin-Helmholtz instabilities. The instabilities are sufficient to cause fragmentation in the absence of some strong stabilizing effect such as surface tension or an internal azimuthal magnetic field. The results of the stability analysis are first applied to rising gas bubbles in liquids. Then, since agreement with the experimental data is found, the results are applied to the similar problem of the rising magnetic flux in the sun. Magnetic flux tubes in a fluid velocity field are intrinsically unstable, unless twisted. With the known dynamical limits on the degree of twisting, an upper limit on the diameter of the order of a few hundred kilometers is found for the stability of individual flux tubes in the photosphere. Observations show that tubes, except when clustered to form sunspots, are generally not larger than this amount. Therefore, it is suggested that the hydrodynamic instability of larger tubes is a prime cause of their absence from the solar photosphere.

Tsinganos, K. C.↗
NASA NTRS1982

A computer program for wing subsonic aerodynamic performance estimates including attainable thrust and vortex lift effects

Numerical methods incorporated into a computer program to provide estimates of the subsonic aerodynamic performance of twisted and cambered wings of arbitrary planform with attainable thrust and vortex lift considerations are described. The computational system is based on a linearized theory lifting surface solution which provides a spanwise distribution of theoretical leading edge thrust in addition to the surface distribution of perturbation velocities. The approach used relies on a solution by iteration. The method also features a superposition of independent solutions for a cambered and twisted wing and a flat wing of the same planform to provide, at little additional expense, results for a large number of angles of attack or lift coefficients. A previously developed method is employed to assess the portion of the theoretical thrust actually attainable and the portion that is felt as a vortex normal force.

Carlson, H. W.↗
NASA NTRS1982

Transonic pressure measurements and comparison of theory to experiment for three arrow-wing configurations

Wind tunnel tests of arrow-wing body configurations consisting of flat, twisted, and cambered twisted wings, as well as a variety of leading and trailing edge control surface deflections, were conducted at Mach numbers from 0.4 to 1.05 to provide an experimental pressure data base for comparison with theoretical methods. Theory to experiment comparisons of detailed pressure distributions were made using state of the art attached flow methods. Conditions under which these theories are valid for these wings are presented.

Manro, M. E.↗
NASA NTRS1981

The three-dimensional boundary layer on a rotating helical blade

The laminar boundary layer on a twisted helical blade is considered. The blade geometry is the same as that proposed by Horlock and Wordsworth (1965). However, the blade is twisted about the leading edge in the manner described by Miyake and Fujita (1974). The flow may be considered to be the analog, in a rotating reference frame, of the flat-plate boundary layer in a stationary frame. It is shown that a coordinate system which is orthogonal in the blade surface may be developed. With the appropriate scaling of the dependent variables a solution for the boundary layer flow is readily obtained. The systems of ordinary differential equations for the stream function of the primary flow and the cross-flow are solved numerically.

Morris, P. J.↗
NASA NTRS1982

Stall induced instability of a teetered rotor

Recent tests on the 38m Mod-0 horizontal experimental wind turbine yielded quantitative information on stall induced instability of a teetered rotor. Tests were conducted on rotor blades with NACA 230 series and NACA 643-618 airfoils at low rotor speeds to produce high angles of attack at relatively low wind speeds and power levels. The behavior of the rotor shows good agreement with predicted rotor response based on blade angle of attack calculations and airfoil section properties. The untwisted blades with the 64 series airfoil sections had a slower rate of onset of rotor instability when compared with the twisted 230 series blades, but high teeter angles and teeter stop impacts were experienced with both rotors as wind speeds increased to produce high angles of attack on the outboard portion of the blade. The relative importance of blade twist and airfoil section stall characteristics on the rate of onset of rotor unstability with increasing wind speed was not established however. Blade pitch was shown to be effective in eliminating rotor instability at the expense of some loss in rotor performance near rated wind speed.

Glasgow, J. C.↗